Actions
Tom
Eastep
2005
Thomas M. Eastep
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
GNU Free Documentation
License
.
This article applies to Shorewall 4.0 and later. If you are running
a version of Shorewall earlier than Shorewall 4.0.0 then please see the
documentation for that release.
What are Shorewall Actions?
Shorewall actions allow a symbolic name to be associated with a
series of one or more iptables rules. The symbolic name may appear in the
ACTION column of an /etc/shorewall/rules file
entry, in which case the traffic matching that rules file entry will be
passed to the series of iptables rules named by the action.
Actions can be thought of as templates. When an action is invoked in
an /etc/shorewall/rules entry, it may be qualified by
a logging specification (log level and optionally a log tag). The presence
of the log level/tag causes a modified series of rules to be generated in
which each packet/rule match within the action causes a log message to be
generated.
There are three types of Shorewall actions:
Built-in Actions. These actions are known by the Shorewall code
itself. They are listed in the comments at the top of the file
/usr/share/shorewall/actions.std.
Standard Actions. These actions are released as part of
Shorewall. They are listed in the file
/usr/share/shorewall/actions.std and are defined
in the corresponding action.* files in /usr/share/shorewall. Each
action.* file has a comment at the beginning of
the file that describes what the action does. As an example, here is
the definition of the AllowSMB standard action
from Shorewall version 2.2.
#
# Shorewall 2.2 /usr/share/shorewall/action.AllowSMB
#
# Allow Microsoft SMB traffic. You need to invoke this action in
# both directions.
#
######################################################################################
#TARGET SOURCE DEST PROTO DEST SOURCE RATE USER/
# PORT PORT(S) LIMIT GROUP
ACCEPT - - udp 135,445
ACCEPT - - udp 137:139
ACCEPT - - udp 1024: 137
ACCEPT - - tcp 135,139,445
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
If you wish to modify one of the standard actions, do not modify
the definition in /usr/share/shorewall. Rather, copy the file to
/etc/shorewall (or somewhere
else on your CONFIG_PATH) and modify the copy.
Standard Actions have been largely replaced by macros in Shorewall 3.0 and later major
versions.
User-defined Actions. These actions are created by end-users.
They are listed in the file /etc/shorewall/actions and are defined in
action.* files in /etc/shorewall or in another directory listed in
your CONFIG_PATH (defined in /etc/shorewall/shorewall.conf).
Enabling the Use of Actions
In Shorewall version 3.4 and later, to make use of any of the three
types of actions you must set the USE_ACTIONS option to Yes in
/etc/shorewall/shorewall.conf.
Default Actions (Formerly Common Actions)
Shorewall allows the association of a default
action with policies. A separate default action may be
associated with ACCEPT, DROP and REJECT policies. Default actions provide
a way to invoke a set of common rules just before the policy is enforced.
Default actions accomplish two goals:
Relieve log congestion. Default actions typically include rules
to silently drop or reject traffic that would otherwise be logged when
the policy is enforced.
Ensure correct operation. Default actions can also avoid common
pitfalls like dropping connection requests on port TCP port 113. If
these connections are dropped (rather than rejected) then you may
encounter problems connecting to internet services that utilize the
AUTH protocol of client authentication
AUTH is actually pretty silly on today's internet but it's
amazing how many servers still employ it.
.
If you are running Shorewall 3.2 or earlier, then:
Shorewall provides default actions for the REJECT and DROP
policies. The default action for REJECT is named
Reject and the default action for DROP is named
Drop. These associations are made through two
entries in /usr/share/shorewall/actions.std:
Drop:DROP #Default Action for DROP policy
Reject:REJECT #Default Action for REJECT policy
These may be overridden by entries in your /etc/shorewall/actions
file.
If you are running Shorewall 3.4 or later, then:
Shorewall supports default actions for the ACCEPT, REJECT, DROP
and QUEUE policies. These default actions are specified in the
/etc/shorewall/shorewall.conf file using the ACCEPT_DEFAULT,
REJECT_DEFAULT, DROP_DEFAULT and QUEUE_DEFAULT options respectively.
Policies whose default is set to a value of "none" have no default
action.
In addition, the default specified in
/etc/shorewall/shorewall.conf may be overridden by specifying a
different default in the POLICY column of /etc/shorewall/policy.
Entries in the DROP and REJECT default actions ARE NOT THE CAUSE OF CONNECTION PROBLEMS.
Remember — default actions are only invoked immediately before the
packet is going to be dropped or rejected anyway!!!
Limiting Per-IP Connection Rate
Debian users. This feature is broken in the Debian version 3.0.7
of Shorewall (and possibly in other versions). The file
/usr/share/shorewall/Limit was inadvertently dropped
from the .deb. That file may be obtained from Shorewall
SVN and installed manually.
Beginning with Shorewall 3.0.4, Shorewall has a 'Limit' action. Limit is invoked with a comma-separated
list in place of a logging tag. The list has three elements:
The name of a 'recent' set; you select the set name which must
conform to the rules for a valid chain name. Different rules that
specify the same set name will use the same set of counters.
The number of connections permitted in a specified time
period.
The time period, expressed in seconds.
Connections that exceed the specified rate are dropped.
For example,to use a recent set name of SSHA, and to limiting SSH to 3 per minute, use this
entry in /etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DEST PORT(S)
Limit:none:SSHA,3,60 net $FW tcp 22
If you want dropped connections to be logged at the info level, use
this rule instead:
#ACTION SOURCE DEST PROTO DEST PORT(S)
Limit:info:SSHA,3,60 net $FW tcp 22
To summarize, you pass four pieces of information to the Limit
action:
The log level. If you don't want to log, specify "none".
The name of the recent set that you want to use ("SSHA" in this
example).
The maximum number of connections to accept (3 in this
example).
The number of seconds over which you are willing to accept that
many connections (60 in this example).
How Limit is Implemented
For those who are curious, the Limit action is implemented in
Shorewall 3.0 and Shorewall 3.2 as follows:
The file
/usr/share/shorewall/action.Limit is
empty.
The file /usr/share/shorewall/Limit is as
follows:
set -- $(separate_list $TAG)
[ $# -eq 3 ] || fatal_error "Rule must include <set name>,<max connections>,<interval> as the log tag"
run_iptables -A $CHAIN -m recent --name $1 --set
if [ -n "$LEVEL" ]; then
run_iptables -N $CHAIN%
log_rule_limit $LEVEL $CHAIN% $1 DROP "" "" -A
run_iptables -A $CHAIN% -j DROP
run_iptables -A $CHAIN -m recent --name $1 --update --seconds $3 --hitcount $(( $2 + 1 )) -j $CHAIN%
else
run_iptables -A $CHAIN -m recent --update --name $1 --seconds $3 --hitcount $(( $2 + 1 )) -j DROP
fi
run_iptables -A $CHAIN -j ACCEPT
In Shorewall 3.3, Limit is made into a built-in action; basically
that means that the above code now lives inside of Shorewall rather than
in a separate file.
For completeness, here's the above
/usr/share/shorewall/Limit for use with
Shorewall-perl:
my @tag = split /,/, $tag;
fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag (' . join( ':', 'Limit', $level eq '' ? 'none' : $level , $tag ) . ')'
unless @tag == 3;
my $set = $tag[0];
for ( @tag[1,2] ) {
fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
}
my $count = $tag[1] + 1;
add_rule $chainref, "-m recent --name $set --set";
if ( $level ) {
my $xchainref = new_chain 'filter' , "$chainref->{name}%";
log_rule_limit $level, $xchainref, $tag[0], 'DROP', '', '', 'add', '';
add_rule $xchainref, '-j DROP';
add_rule $chainref, "-m recent --name $set --update --seconds $tag[2] --hitcount $count -j $xchainref->{name}";
} else {
add_rule $chainref, "-m recent --update --name $set --seconds $tag[2] --hitcount $count -j DROP";
}
add_rule $chainref, '-j ACCEPT';
1;
Defining your own Actions
Before defining a new action, you should evaluate whether your goal
can be best accomplished using an action or a
macro. See this
article for details.
To define a new action:
Add a line to
/etc/shorewall/actions that
names your new action. Action names must be valid shell variable names
((must begin with a letter and be composed of letters, digits and
underscore characters) as well as valid Netfilter chain names. If you
intend to log from the action, the name must have a maximum of 11
characters. It is recommended that the name you select for a new
action begins with a capital letter; that way, the name won't conflict
with a Shorewall-defined chain name.
The name of the action may be optionally followed by a colon
(:
) and ACCEPT, DROP or REJECT. When this is done, the
named action will become the default action for
policies of type ACCEPT, DROP or REJECT respectively. The default
action is applied immediately before the policy is enforced (before
any logging is done under that policy) and is used mainly to suppress
logging of uninteresting traffic which would otherwise clog your logs.
The same policy name can appear in multiple actions; the last such
action for each policy name is the one which Shorewall will
use.
Shorewall includes pre-defined actions for DROP and REJECT --
see above.
Once you have defined your new action name (ActionName), then
copy /usr/share/shorewall/action.template to
/etc/shorewall/action.ActionName (for example, if
your new action name is Foo
then copy
/usr/share/shorewall/action.template to
/etc/shorewall/action.Foo).
Now modify the new file to define the new action.
Columns in the action.template file are as follows:
TARGET - Must be ACCEPT, DROP, REJECT, LOG, CONTINUE, QUEUE or
<action> where
<action> is a previously-defined action
(that is, it must precede the action being defined in this file in
your /etc/shorewall/actions file). These actions
have the same meaning as they do in the
/etc/shorewall/rules file (CONTINUE terminates
processing of the current action and returns to the point where that
action was invoked). The TARGET may optionally be followed by a colon
(:
) and a syslog log level (e.g, REJECT:info or
ACCEPT:debugging). This causes the packet to be logged at the
specified level. You may also specify ULOG (must be in upper case) as
a log level. This will log to the ULOG target for routing to a
separate log through use of ulogd (http://www.netfilter.org/projects/ulogd/index.html).
You may also use a macro in
your action provided that the macro's expansion only results in the
ACTIONs ACCEPT, DROP, REJECT, LOG, CONTINUE, or QUEUE. See
/usr/share/shorewall/Drop for an example of an
action that users macros extensively.
SOURCE - Source hosts to which the rule applies. A
comma-separated list of subnets and/or hosts. Hosts may be specified
by IP or MAC address; mac addresses must begin with ~
and must use -
as a separator.
Alternatively, clients may be specified by interface name. For
example, eth1 specifies a client that communicates with the firewall
system through eth1. This may be optionally followed by another colon
(:
) and an IP/MAC/subnet address as described above
(e.g., eth1:192.168.1.5).
DEST - Location of Server. Same as above with the exception that
MAC addresses are not allowed.
Unlike in the SOURCE column, you may specify a range of up to
256 IP addresses using the syntax <first
ip>-<last ip>.
PROTO - Protocol - Must be tcp
,
udp
, icmp
, a protocol number, or
all
.
DEST PORT(S) - Destination Ports. A comma-separated list of Port
names (from /etc/services), port numbers or port
ranges; if the protocol is icmp
, this column is
interpreted as the destination icmp-type(s).
A port range is expressed as <low
port>:<high port>.
This column is ignored if PROTO = "all", but must be entered if
any of the following fields are supplied. In that case, it is
suggested that this field contain -
.
If your kernel contains multi-port match support, then only a
single Netfilter rule will be generated if in this list and in the
CLIENT PORT(S) list below:
There are 15 or less ports listed.
No port ranges are included.
Otherwise, a separate rule will be generated for each
port.
SOURCE PORT(S) - Port(s) used by the client. If omitted, any
source port is acceptable. Specified as a comma-separated list of port
names, port numbers or port ranges.
If you don't want to restrict client ports but need to specify
any of the following fields, then place "-" in this column.
If your kernel contains multi-port match support, then only a
single Netfilter rule will be generated if in this list and in the
DEST PORT(S) list above:
There are 15 or less ports listed.
No port ranges are included.
Otherwise, a separate rule will be generated for each
port.
RATE LIMIT - You may rate-limit the rule by placing a value in
this column:
<rate>/<interval>[:<burst>]where
<rate> is the number of connections per
<interval> (sec
or
min
) and <burst> is the
largest burst permitted. If no <burst> is
given, a value of 5 is assumed. There may be no whitespace embedded in
the specification.
Example: 10/sec:20
USER/GROUP - For output rules (those with the firewall as their
source), you may control connections based on the effective UID and/or
GID of the process requesting the connection. This column can contain
any of the following:
[!]<user number>[:]
[!]<user name>[:]
[!]:<group number>
[!]:<group name>
[!]<user
number>:<group
number>
[!]<user
name>:<group
number>
[!]<user
inumber>:<group
name>
[!]<user
name>:<group name>
[!]+<program name> (Note: support
for this form was removed from Netfilter in kernel version
2.6.14).
MARK (Added in Shorewall 3.4.4)
[!]<value>[/<mask>][:C]
Defines a test on the existing packet or connection mark. The
rule will match only if the test returns true.
If you don’t want to define a test but need to specify anything
in the following columns, place a "-" in this field.
! — Inverts the test (not equal)
<value> — Value of the packet
or connection mark.
<mask> —A mask to be applied to
the mark before testing.
:C — Designates a connection mark. If omitted, the packet
mark’s value is tested. This option is only supported by
Shorewall-perl
Omitted column entries should be entered using a dash ("-").
Example:
/etc/shorewall/actions:
LogAndAccept/etc/shorewall/action.LogAndAccept LOG:info
ACCEPT
To use your action, in /etc/shorewall/rules you
might do something like:
#ACTION SOURCE DEST PROTO DEST PORT(S)
LogAndAccept loc $FW tcp 22
Actions and Logging
Specifying a log level in a rule that specifies a user-defined or
Shorewall-defined action will cause each rule in the action to be logged
with the specified level (and tag).
The extent to which logging of action rules occur is governed by the
following:
When you invoke an action and specify a log level, only those
rules in the action that have no log level will be changed to log at
the level specified at the action invocation.
Example:
/etc/shorewall/action.foo
#TARGET SOURCE DEST PROTO DEST PORT(S)
ACCEPT - - tcp 22
bar:info
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DEST PORT(S)
foo:debug $FW net
Logging in the invoke 'foo' action will be as if foo had been
defined as:
#TARGET SOURCE DEST PROTO DEST PORT(S)
ACCEPT:debug - - tcp 22
bar:info
If you follow the log level with "!" then logging will be set at
that level for all rules recursively invoked by the action.
Example:
/etc/shorewall/action.foo
#TARGET SOURCE DEST PROTO DEST PORT(S)
ACCEPT - - tcp 22
bar:info
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DEST PORT(S)
foo:debug! $FW net
Logging in the invoke 'foo' action will be as if foo had been
defined as:
#TARGET SOURCE DEST PROTO DEST PORT(S)
ACCEPT:debug - - tcp 22
bar:debug
The change in Shorewall 2.1.2 has an effect on extension scripts
used with user-defined actions. If you define an action 'acton' and you
have an /etc/shorewall/acton script then when that
script is invoked, the following three variables will be set for use by
the script:
$CHAIN = the name of the chain where your rules are to be
placed. When logging is used on an action invocation, Shorewall
creates a chain with a slightly different name from the action
itself.
$LEVEL = Log level. If empty, no logging was specified.
$TAG = Log Tag.
Example:
/etc/shorewall/rules:
#ACTION SOURCE DEST
acton:info:test $FW net
Your /etc/shorewall/acton file will be run with:
$CHAIN="%acton1"
$LEVEL="info"
$TAG="test"
Shorewall-perl sets lexical variables as follows:
$chainref is a reference to the chain-table entry for the chain
where your rules are to be placed.
$level is the log level. If false, no logging was
specified.
$tag is the log tag.
For an example of how to use these variables in both Shorewall-shell
and Shorewall-perl, see this
article.
Creating an Action using an Extension Script
There may be cases where you wish to create a chain with rules that
can't be constructed using the tools defined in the action.template. In
that case, you can use an extension script.
If you actually need an action to drop broadcast packets, use
the dropBcast standard action rather than create
one like this.
An action to drop all broadcast packets
/etc/shorewall/actionsDropBcasts
/etc/shorewall/action.DropBcasts# This file is emptyWhen
using Shorewall-shell:
/etc/shorewall/DropBcastsrun_iptables -A DropBcasts -m pkttype --pkttype broadcast -j DROP
When using Shorewall-Perl:
/etc/shorewall/DropBcastsuse Shorewall::Chains;
add_rule( $chainref, '-m pkttype --pkttype broadcast -j DROP' );
1;
For a richer example, see this
article.