# # Shorewall 4.5 -- /usr/share/shorewall/lib.cli. # # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt] # # (c) 1999-2013 - Tom Eastep (teastep@shorewall.net) # # Complete documentation is available at http://shorewall.net # # This program is free software; you can redistribute it and/or modify # it under the terms of Version 2 of the GNU General Public License # as published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. # # This library contains the command processing code common to /sbin/shorewall[6] and # /sbin/shorewall[6]-lite. In Shorewall and Shorewall6, the lib.cli-std library is # loaded after this one and replaces some of the functions declared here. # SHOREWALL_CAPVERSION=40515 [ -n "${g_program:=shorewall}" ] if [ -z "$g_readrc" ]; then # # This is modified by the installer when ${SHAREDIR} <> /usr/share # . /usr/share/shorewall/shorewallrc g_sharedir="$SHAREDIR"/$g_program g_confdir="$CONFDIR"/$g_program g_readrc=1 fi . ${SHAREDIR}/shorewall/lib.base # # Fatal Error # fatal_error() # $@ = Message { echo " ERROR: $@" >&2 exit 2 } # # Issue an error message and die # startup_error() { echo " ERROR: $@" >&2 kill $$ exit 1 } # # Display a chain if it exists # showfirstchain() # $1 = name of chain { awk \ 'BEGIN {prnt=0; rslt=1; }; \ /^$/ { next; };\ /^Chain/ {if ( prnt == 1 ) { rslt=0; exit 0; }; };\ /Chain '$1'/ { prnt=1; }; \ { if (prnt == 1) print; };\ END { exit rslt; }' $TMPFILE } showchain() # $1 = name of chain { if [ "$firstchain" = "Yes" ]; then if showfirstchain $1; then firstchain= fi else awk \ 'BEGIN {prnt=0;};\ /^$|^ pkts/ { next; };\ /^Chain/ {if ( prnt == 1 ) exit; };\ /Chain '$1'/ { prnt=1; };\ { if (prnt == 1) print; }' $TMPFILE fi } # # The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules). # iptablesbug() { if [ $g_family -eq 4 ]; then if qt mywhich awk ; then awk 'BEGIN { sline=""; };\ /^-[jg]/ { print sline $0; next };\ /-m policy.*-[jg] / { print $0; next };\ /-m policy/ { sline=$0; next };\ /--mask ff/ { sub( /--mask ff/, "--mask 0xff" ) };\ { print ; sline="" }' else echo " WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2 cat fi else cat fi } # # Validate the value of RESTOREFILE # validate_restorefile() # $* = label { case $RESTOREFILE in */*) error_message "ERROR: $@ must specify a simple file name: $RESTOREFILE" exit 2 ;; .safe|.try) ;; .*|NONE) error_message "ERROR: Reserved File Name: $RESTOREFILE" exit 2 ;; esac } # # Clear descriptor 1 if it is a terminal # clear_term() { [ -t 1 ] && clear } # # Delay $timeout seconds -- if we're running on a recent bash2 then allow # to terminate the delay # timed_read () { read -t $timeout foo 2> /dev/null test $? -eq 2 && sleep $timeout } # # Determine if 'syslog -C' is running # syslog_circular_buffer() { local pid local tty local flags local cputime local path local args local arg ps ax 2> /dev/null | while read pid tty flags cputime path args; do case $path in syslogd|*/syslogd) for arg in $args; do if [ x$arg = x-C ]; then echo Yes return fi done ;; esac done } # # Display the last $1 packets logged # packet_log() # $1 = number of messages { if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then if [ $g_family -eq 4 ]; then $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/ else $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/ fi elif [ $g_family -eq 4 ]; then $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/ else $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/ fi } search_log() # $1 = IP address to search for { if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then if [ $g_family -eq 4 ]; then $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/ else $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/ fi elif [ $g_family -eq 4 ]; then $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/ else $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/ fi } # # Show traffic control information # show_tc() { show_one_tc() { local device device=${1%@*} qdisc=$(tc qdisc list dev $device) if [ -n "$qdisc" ]; then echo Device $device: tc -s -d qdisc show dev $device echo tc -s -d class show dev $device echo fi } if [ $# -gt 0 ]; then show_one_tc $1 else ip -o link list | while read inx interface details; do show_one_tc ${interface%:} done fi } # # Show classifier information # show_classifiers() { show_one_classifier() { local device device=${1%@*} qdisc=$(tc qdisc list dev $device) if [ -n "$qdisc" ]; then echo Device $device: tc -s filter ls dev $device echo fi } ip -o link list | while read inx interface details; do show_one_classifier ${interface%:} done } # # Watch the Firewall Log # logwatch() # $1 = timeout -- if negative, prompt each time that # an 'interesting' packet count changes { if [ -z "$LOGFILE" ]; then LOGFILE=/var/log/messages if [ -n "$(syslog_circular_buffer)" ]; then g_logread="logread | tac" elif [ -r $LOGFILE ]; then g_logread="tac $LOGFILE" else fatal_error "LOGFILE ($LOGFILE) does not exist!" fi fi host=$(echo $g_hostname | sed 's/\..*$//') oldrejects=$($g_tool -L -v -n | grep 'LOG') if [ $1 -lt 0 ]; then timeout=$((- $1)) pause="Yes" else pause="No" timeout=$1 fi qt mywhich awk && haveawk=Yes || haveawk= while true; do clear_term echo "$banner $(date)" echo echo "Dropped/Rejected Packet Log ($LOGFILE)" echo show_reset rejects=$($g_tool -L -v -n | grep 'LOG') if [ "$rejects" != "$oldrejects" ]; then oldrejects="$rejects" $g_ring_bell packet_log 40 if [ "$pause" = "Yes" ]; then echo echo $g_echo_n 'Enter any character to continue: ' read foo else timed_read fi else echo packet_log 40 timed_read fi done } # # Try to find the arptables binary -- sets the variable 'arptables' # resolve_arptables() { arptables="$ARPTABLES" [ -n "${arptables:=arptables}" ] case $arptables in */*) ;; *) arptables=$(mywhich "$arptables") ;; esac } # # Save currently running configuration # do_save() { local status local arptables status=0 if [ -f ${VARDIR}/firewall ]; then if $iptables_save | iptablesbug > ${VARDIR}/restore-$$; then cp -f ${VARDIR}/firewall $g_restorepath mv -f ${VARDIR}/restore-$$ ${g_restorepath}-iptables chmod +x $g_restorepath echo " Currently-running Configuration Saved to $g_restorepath" run_user_exit save else rm -f ${VARDIR}/restore-$$ echo " ERROR: Currently-running Configuration Not Saved" >&2 status=1 fi else echo " ERROR: ${VARDIR}/firewall does not exist" >&2 status=1 fi case ${SAVE_ARPTABLES:=No} in [Yy]es) resolve_arptables if [ -n "$arptables" ]; then # # 'sed' command is a hack to work around broken arptables_jf # if ${arptables}-save | sed 's/-p[[:space:]]\+0\([[:digit:]]\)00\/ffff/-p 000\1\/ffff/' > ${VARDIR}/restore-$$; then if grep -q '^-A' ${VARDIR}/restore-$$; then mv -f ${VARDIR}/restore-$$ ${g_restorepath}-arptables else rm -f ${VARDIR}/restore-$$ fi fi else case "$ARPTABLES" in */*) error_message "ERROR: ARPTABLES=$ARPTABLES does not exist or is not executable - arptables not saved" ;; *) error_message "ERROR: The arptables utility cannot be located - arptables not saved" ;; esac rm -f ${g_restorepath}-arptables fi ;; [Nn]o) rm -f ${g_restorepath}-arptables ;; *) error_message "WARNING: Invalid value ($SAVE_ARPTABLES) for SAVE_ARPTABLES" ;; esac case ${SAVE_IPSETS:=No} in [Yy]es) case ${IPSET:=ipset} in */*) if [ ! -x "$IPSET" ]; then error_message "ERROR: IPSET=$IPSET does not exist or is not executable - ipsets are not saved" IPSET= fi ;; *) IPSET="$(mywhich $IPSET)" [ -n "$IPSET" ] || error_message "ERROR: The ipset utility cannot be located - ipsets are not saved" ;; esac if [ -n "$IPSET" ]; then if [ -f /etc/debian_version ] && [ $(cat /etc/debian_version) = 5.0.3 ]; then # # The 'grep -v' is a hack for a bug in ipset's nethash implementation when xtables-addons is applied to Lenny # hack='| grep -v /31' else hack= fi if eval $IPSET -S $hack > ${VARDIR}/ipsets.tmp; then # # Don't save an 'empty' file # grep -qE -- '^(-N|create )' ${VARDIR}/ipsets.tmp && mv -f ${VARDIR}/ipsets.tmp ${g_restorepath}-ipsets fi fi ;; [Nn]o) ;; *) error_message "WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS" ;; esac return $status } save_config() { local result result=1 iptables_save=${g_tool}-save [ -x $iptables_save ] || echo "$iptables-save does not exist or is not executable" >&2 if product_is_started ; then [ -d ${VARDIR} ] || mkdir -p ${VARDIR} if [ -f $g_restorepath -a ! -x $g_restorepath ]; then echo " ERROR: $g_restorepath exists and is not a saved $g_product configuration" >&2 else case $RESTOREFILE in capabilities|chains|default_route|firewall|firewall.conf|nat|proxyarp|restarted|rt_tables|save|state|undo_routing|zones) echo " ERROR: Reserved file name: $RESTOREFILE" >&2 ;; *) validate_restorefile RESTOREFILE if do_save; then rm -f ${VARDIR}/save result=0 fi ;; esac fi else echo "$g_product isn't started" >&2 fi return $result } # # Recent Linux systems seem to like to print a randomly-ordered # view of routing tables. This hack sorts the output into the # order we all know and love # sort_routes() { local dest local second local rest local vlsm local maxvlsm local rule if [ $g_family -eq 4 ]; then maxvlsm=032 else maxvlsm=128 fi while read dest second rest; do if [ -n "$dest" ]; then rule="$dest $second $rest" case "$dest" in default) echo "000 $rule" ;; blackhole|local) case "$second" in */*) vlsm=${second#*/} printf "%03d %s\n" $vlsm "$rule" ;; *) echo "$maxvlsm $rule" ;; esac ;; */*) vlsm=${dest#*/} printf "%03d %s\n" $vlsm "$rule" ;; *) echo "$maxvlsm $rule" ;; esac fi done | sort -r | while read dest rest; do echo $rest; done } # # Isolate the table in the routing rules being read from stdin. # Piping through sed to remove trailing whitespace works around # recent 'features' in dash and ip. # find_tables() { sed -r 's/[[:space:]]+$//' | while read rule; do echo ${rule##* } done } # # Show routing configuration # show_routing() { local rule local table if [ -n "$(ip -$g_family rule list)" ]; then heading "Routing Rules" ip -$g_family rule list ip -$g_family rule list | find_tables | sort -u | while read table; do heading "Table $table:" if [ $g_family -eq 6 ]; then ip -$g_family -o route list table $table | grep -vF cache | sort_routes else ip -4 -o route list table $table | sort_routes fi done if [ -n "$g_routecache" ]; then heading "Route Cache" ip -$g_family route list cache fi else heading "Routing Table" if [ $g_family -eq 6 ]; then ip -$g_family -o route list | grep -vF cache | sort_routes else ip -4 -o route list table $table | sort_routes fi fi } determine_ipset_version() { local setname if [ -z "$IPSET" -o "$IPSET" = "ipset" ]; then IPSET=$(mywhich ipset) [ -n "$IPSET" ] || fatal_error "The ipset utility cannot be located" fi setname=fooX$$ qt ipset -X $setname # Just in case something went wrong the last time if qt ipset -N $setname hash:ip family inet; then qt ipset -X $setname IPSETN="$IPSET" else IPSETN="$IPSET -n" fi } # # 'list dynamic' command executor # find_sets() { local junk local setname $IPSETN -L | egrep "^Name: ${1}(_.+)?$" | while read junk setname; do echo $setname; done } list_zone() { local sets local setname determine_ipset_version if [ $g_family -eq 4 ]; then sets=$($IPSETN -L | egrep "^$1(_.+)?"); else sets=$($IPSETN -L | egrep "^6_$1(_.+)?") fi [ -n "$sets" ] || sets=$(find_sets $1) for setname in $sets; do echo "${setname#${1}_}:" $IPSETN -L $setname | awk 'BEGIN {prnt=0;}; \ /^Members:/ {prnt=1; next; }; \ /^Bindings:/ {prnt=0; }; \ { if (prnt == 1) print " ", $1; };' done } version_command() { local finished finished=0 local all all= local product while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; a*) all=Yes option=${option#a} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done [ $# -gt 0 ] && usage 1 if [ -n "$all" ]; then echo "shorewall-core: $(cat ${SHAREDIR}/shorewall/coreversion)" for product in shorewall shorewall6 shorewall-lite shorewall6-lite shorewall-init; do if [ -f ${SHAREDIR}/$product/version ]; then echo "$product: $(cat ${SHAREDIR}/$product/version)" fi done if [ "$(id -u)" -eq 0 -a -f $g_firewall ]; then echo $g_echo_n "$g_firewall was compiled by Shorewall version " $g_firewall version fi else echo $SHOREWALL_VERSION fi } # # Show Filter - For Shorewall[6]-lite, if there was an scfilter file at compile-time, # then the compiler generated another version of this function and # embedded it in the firewall.conf file. That version supersedes this # one. # show_connections_filter() { local filter local command local first command=${SHOREWALL_SHELL} filter=$(find_file scfilter) if [ -f $filter ]; then first=$(head -n1 $filter) case $first in \#!*) command=${first#\#!} ;; esac $command $filter else cat - fi } show_nfacct() { if [ -n "$NFACCT" -a ! -x "$NFACCT" ]; then error_message "WARNING: NFACCT=$NFACCT does not exist or is not executable" NFACCT= else NFACCT=$(mywhich nfacct) [ -n "$NFACCT" ] || echo "No NF Accounting defined (nfacct not found)" fi if [ -n "$NFACCT" ]; then $NFACCT list echo fi } show_event() { local address local ttl_label local ttl local last_seen local last local oldest_pkt local oldest local intimes local outtimes1 local outtimes2 local time local count while read address ttl_label ttl last_seen last oldest_pkt oldest intimes; do case $address in *.*) [ $g_family -eq 4 ] || continue ;; *:*) [ $g_family -eq 6 ] || continue ;; *) continue ;; esac outtimes1='' outtimes2='' count=0 last=$((($currenttime - $last)/1000)) for time in $intimes; do time=${time%,} time=$(($currenttime - $time)) if [ $time -lt 10 ]; then time="000$time" elif [ $time -lt 100 ]; then time="00$time" elif [ $time -lt 1000 ]; then time="0$time" fi if [ $count -lt $oldest ]; then outtimes2="$outtimes2 $time" else outtimes1="$outtimes1 $time" fi count=$(($count + 1)) done outtimes1="${outtimes1}${outtimes2}" [ -n "$outtimes1" ] && outtimes1=$(echo "$outtimes1 " | sed -r 's/([[:digit:]]{3}) /\.\1, /g') && outtimes1=${outtimes1%, } echo " $address : ${outtimes1}" done < /proc/net/xt_recent/$1 } show_events() { local file local base local currenttime if [ -f /proc/net/xt_recent/%CURRENTTIME ]; then echo -127.0.0.1 > /proc/net/xt_recent/%CURRENTTIME echo +127.0.0.1 > /proc/net/xt_recent/%CURRENTTIME currenttime=$(cat /proc/net/xt_recent/%CURRENTTIME | cut -d ' ' -f 5 -) # echo Current time: $currenttime # echo else currenttime=0 fi if [ $# -gt 0 ]; then for event in $@ ; do if [ -f /proc/net/xt_recent/$event ]; then echo $event: show_event $event echo else error_message "WARNING: Event $event not found" fi done else for file in /proc/net/xt_recent/*; do base=$(basename $file) if [ $base != %CURRENTTIME ]; then echo $base show_event $base echo fi done fi } # # Show Command Executor # show_command() { local finished finished=0 local table table=filter local table_given table_given= local output_filter output_filter=cat local arptables show_macro() { foo=`grep 'This macro' $macro | sed 's/This macro //'` if [ -n "$foo" ]; then macro=${macro#*.} foo=${foo%.*} if [ ${#macro} -gt 10 ]; then echo " $macro ${foo#\#}" else $g_echo_e " $macro \t${foo#\#}" fi fi } # eliminates rules which have not been used from ip*tables' output brief_output() { awk \ '/^Chain / { heading1 = $0; getline heading2; printed = 0; next; }; /^ +0 +0 / { next; }; /^$/ { if ( printed == 1 ) { print $0; }; next; }; { if ( printed == 0 ) { print heading1; print heading2; printed = 1 }; }; { print; }'; } while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; v*) VERBOSITY=$(($VERBOSITY + 1 )) option=${option#v} ;; x*) g_ipt_options="-xnv" option=${option#x} ;; m*) g_showmacs=Yes option=${option#m} ;; f*) g_filemode=Yes option=${option#f} ;; t) [ $# -eq 1 ] && usage 1 case $2 in mangle|nat|filter|raw|rawpost) table=$2 table_given=Yes ;; *) fatal_error "Invalid table name ($s)" ;; esac option= shift ;; l*) g_ipt_options1="--line-numbers" option=${option#l} ;; c*) g_routecache=Yes option=${option#c} ;; b*) output_filter=brief_output option=${option#b} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done g_ipt_options="$g_ipt_options $g_ipt_options1" [ -n "$g_debugging" ] && set -x case "$1" in connections) [ $# -gt 1 ] && usage 1 if [ $g_family -eq 4 ]; then if [ -d /proc/sys/net/netfilter/ ]; then local count local max count=$(cat /proc/sys/net/netfilter/nf_conntrack_count) max=$(cat /proc/sys/net/netfilter/nf_conntrack_max) echo "$g_product $SHOREWALL_VERSION Connections ($count out of $max) at $g_hostname - $(date)" else echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)" fi echo if qt mywhich conntrack ; then conntrack -f ipv${g_family} -L | show_connections_filter else if [ -f /proc/net/ip_conntrack ]; then cat /proc/net/ip_conntrack | show_connections_filter else grep -v '^ipv6' /proc/net/nf_conntrack | show_connections_filter fi fi elif qt mywhich conntrack ; then echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)" echo conntrack -f ipv6 -L | show_connections_filter else local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count) local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max) echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)" echo grep '^ipv6' /proc/net/nf_conntrack | sed -r 's/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | show_connections_filter fi ;; nat) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION NAT Table at $g_hostname - $(date)" echo show_reset $g_tool -t nat -L $g_ipt_options | $output_filter ;; raw) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION RAW Table at $g_hostname - $(date)" echo show_reset $g_tool -t raw -L $g_ipt_options | $output_filter ;; rawpost) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION RAWPOST Table at $g_hostname - $(date)" echo show_reset $g_tool -t rawpost -L $g_ipt_options | $output_filter ;; tos|mangle) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION Mangle Table at $g_hostname - $(date)" echo show_reset $g_tool -t mangle -L $g_ipt_options | $output_filter ;; log) [ $# -gt 2 ] && usage 1 if [ -z "$LOGFILE" ]; then LOGFILE=/var/log/messages if [ -n "$(syslog_circular_buffer)" ]; then g_logread="logread | tac" elif [ -r $LOGFILE ]; then g_logread="tac $LOGFILE" else fatal_error "LOGFILE ($LOGFILE) does not exist!" fi fi echo "$g_product $SHOREWALL_VERSION Log ($LOGFILE) at $g_hostname - $(date)" echo show_reset host=$(echo $g_hostname | sed 's/\..*$//') if [ $# -eq 2 ]; then search_log $2 else packet_log 20 fi ;; tc) [ $# -gt 2 ] && usage 1 echo "$g_product $SHOREWALL_VERSION Traffic Control at $g_hostname - $(date)" echo shift if [ -z "$1" ]; then $g_tool -t mangle -L -n -v | $output_filter echo fi show_tc $1 ;; classifiers|filters) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION Classifiers at $g_hostname - $(date)" echo show_classifiers ;; zones) [ $# -gt 1 ] && usage 1 if [ -f ${VARDIR}/zones ]; then echo "$g_product $SHOREWALL_VERSION Zones at $g_hostname - $(date)" echo while read zone type hosts; do echo "$zone ($type)" for host in $hosts; do case $host in exclude) echo " exclude:" ;; *) echo " $host" ;; esac done done < ${VARDIR}/zones echo else fatal_error "${VARDIR}/zones does not exist" fi ;; capabilities) [ $# -gt 1 ] && usage 1 determine_capabilities VERBOSITY=2 if [ -n "$g_filemode" ]; then report_capabilities1 else report_capabilities fi ;; ip) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION IP at $g_hostname - $(date)" echo ip -$g_family addr list ;; routing) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION Routing at $g_hostname - $(date)" echo show_routing ;; config) . ${g_sharedir}/configpath if [ -n "$g_filemode" ]; then echo "CONFIG_PATH=$CONFIG_PATH" echo "VARDIR=$VARDIR" echo "LIBEXEC=${LIBEXECDIR}" echo "SBINDIR=${SBINDIR}" echo "CONFDIR=${CONFDIR}" [ -n "$g_lite" ] && [ ${VARDIR} != /var/lib/$g_program ] && echo "LITEDIR=${VARDIR}" else echo "Default CONFIG_PATH is $CONFIG_PATH" echo "Default VARDIR is /var/lib/$g_program" echo "LIBEXEC is ${LIBEXECDIR}" echo "SBINDIR is ${SBINDIR}" echo "CONFDIR is ${CONFDIR}" [ -n "$g_lite" ] && [ ${VARDIR} != /var/lib/$g_program ] && echo "LITEDIR is ${VARDIR}" fi ;; chain) shift echo "$g_product $SHOREWALL_VERSION $([ $# -gt 1 ] && echo "Chains " || [ $# -gt 0 ] && echo "Chain " || echo $table Table)$* at $g_hostname - $(date)" echo show_reset if [ $# -gt 0 ]; then for chain in $*; do $g_tool -t $table -L $chain $g_ipt_options | $output_filter echo done else $g_tool -t $table -L $g_ipt_options | $output_filter fi ;; vardir) echo $VARDIR; ;; policies) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION Policies at $g_hostname - $(date)" echo [ -f ${VARDIR}/policies ] && cat ${VARDIR}/policies; ;; ipa) [ $g_family -eq 4 ] || usage 1 echo "$g_product $SHOREWALL_VERSION per-IP Accounting at $g_hostname - $(date)" echo [ $# -gt 1 ] && usage 1 perip_accounting ;; marks) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION Mark Layout at $g_hostname - $(date)" echo [ -f ${VARDIR}/marks ] && cat ${VARDIR}/marks; ;; nfacct) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION NF Accounting at $g_hostname - $(date)" echo show_nfacct ;; arptables) [ $# -gt 1 ] && usage 1 resolve_arptables if [ -n "$arptables" -a -x $arptables ]; then echo "$g_product $SHOREWALL_VERSION arptables at $g_hostname - $(date)" echo $arptables -L -n -v else error_message "Cannot locate the arptables executable" fi ;; event) [ $# -gt 1 ] || usage 1 echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)" echo shift show_events $@ ;; events) [ $# -gt 1 ] && usage 1 echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)" echo show_events ;; *) case "$g_program" in *-lite) ;; *) case $1 in actions) [ $# -gt 1 ] && usage 1 echo "A_ACCEPT # Audit and accept the connection" echo "A_DROP # Audit and drop the connection" echo "A_REJECT # Audit and reject the connection " echo "allowBcast # Silently Allow Broadcast/multicast" echo "allowInvalid # Accept packets that are in the INVALID conntrack state." echo "allowinUPnP # Allow UPnP inbound (to firewall) traffic" echo "allowoutUPnP # Allow traffic from local command 'upnpd' (does not work with kernels after 2.6.13)" echo "dropBcast # Silently Drop Broadcast/multicast" echo "dropInvalid # Silently Drop packets that are in the INVALID conntrack state" echo "dropNotSyn # Silently Drop Non-syn TCP packets" echo "forwardUPnP # Allow traffic that upnpd has redirected from" echo "rejNotSyn # Silently Reject Non-syn TCP packets" if [ -f ${g_confdir}/actions ]; then cat ${g_sharedir}/actions.std ${g_confdir}/actions | grep -Ev '^\#|^$' else grep -Ev '^\#|^$' ${g_sharedir}/actions.std fi return ;; macro) [ $# -ne 2 ] && usage 1 for directory in $(split $CONFIG_PATH); do if [ -f ${directory}/macro.$2 ]; then echo "Shorewall $SHOREWALL_VERSION Macro $2 at $g_hostname - $(date)" cat ${directory}/macro.$2 return fi done echo " WARNING: Macro $2 not found" >&2 return ;; macros) [ $# -gt 1 ] && usage 1 for directory in $(split $CONFIG_PATH); do temp= for macro in ${directory}/macro.*; do case $macro in *\*) ;; *) if [ -z "$temp" ]; then echo echo "Macros in $directory:" echo temp=Yes fi show_macro ;; esac done done return ;; esac ;; esac if [ $# -gt 0 ]; then if [ $1 = dynamic -a $# -gt 1 ]; then shift [ $# -eq 1 ] || usage 1 list_zone $1 return; fi [ -n "$table_given" ] || for chain in $*; do if ! qt $g_tool -t $table -L $chain $g_ipt_options; then error_message "ERROR: Chain '$chain' is not recognized by $g_tool." exit 1 fi done echo "$g_product $SHOREWALL_VERSION $([ $# -gt 1 ] && echo "Chains " || echo "Chain ")$* at $g_hostname - $(date)" echo show_reset for chain in $*; do $g_tool -t $table -L $chain $g_ipt_options | $output_filter echo done else echo "$g_product $SHOREWALL_VERSION $table Table at $g_hostname - $(date)" echo show_reset $g_tool -t $table -L $g_ipt_options | $output_filter fi ;; esac } perip_accounting() { if qt mywhich iptaccount; then local hnames local hname hnames=$(iptaccount -a | grep '^Found table:' | cut -d ' ' -f 3) if [ -n "$hnames" ]; then for hname in $hnames; do iptaccount -l $hname | egrep '^IP:|^Show' echo done else echo " No IP Accounting Tables Defined" echo fi else echo " iptaccount is not installed" fi } # # Dump Filter - For Shorewall-lite, if there was a dumpfilter file at compile-time, # then the compiler generated another version of this function and # embedded it in the firewall.conf file. That version supersedes this # one. # dump_filter() { local filter local command local first command=${SHOREWALL_SHELL} filter=$(find_file dumpfilter) if [ -f $filter ]; then first=$(head -n1 $filter) case $first in \#!*) command=${first#\#!} ;; esac $command $filter else cat - fi } # # Dump Command Executor # do_dump_command() { local finished finished=0 local arptables resolve_arptables while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; x*) g_ipt_options="-xnv" option=${option#x} ;; m*) g_showmacs=Yes option=${option#m} ;; l*) g_ipt_options1="--line-numbers" option=${option#l} ;; c*) g_routecache=Yes option=${option#c} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done if [ -z "$LOGFILE" ]; then LOGFILE=/var/log/messages if [ -n "$(syslog_circular_buffer)" ]; then g_logread="logread | tac" elif [ -r $LOGFILE ]; then g_logread="tac $LOGFILE" else fatal_error "LOGFILE ($LOGFILE) does not exist! - See http://www.shorewall.net/shorewall_logging.html" fi fi g_ipt_options="$g_ipt_options $g_ipt_options1" [ $VERBOSITY -lt 2 ] && VERBOSITY=2 [ -n "$g_debugging" ] && set -x [ $# -eq 0 ] || usage 1 clear_term echo "$g_product $SHOREWALL_VERSION Dump at $g_hostname - $(date)" echo if [ $g_family -eq 6 ] && [ -f ${SHAREDIR}/shorewall/version ]; then echo " Shorewall $(cat ${SHAREDIR}/shorewall/version)" echo fi show_status show_reset host=$(echo $g_hostname | sed 's/\..*$//') $g_tool -L $g_ipt_options if [ -n "$arptables" -a -x "$arptables" ]; then heading "ARP rules" $arptables -L -n -v fi heading "Log ($LOGFILE)" packet_log 20 if qt $g_tool -t nat -L -n; then heading "NAT Table" $g_tool -t nat -L $g_ipt_options fi if qt $g_tool -t mangle -L -n; then heading "Mangle Table" $g_tool -t mangle -L $g_ipt_options fi if qt $g_tool -t raw -L -n; then heading "Raw Table" $g_tool -t raw -L $g_ipt_options fi if qt $g_tool -t rawpost -L -n; then heading "Rawpost Table" $g_tool -t rawpost -L $g_ipt_options fi local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count) local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max) heading "Conntrack Table ($count out of $max)" if [ $g_family -eq 4 ]; then [ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack else grep '^ipv6' /proc/net/nf_conntrack fi heading "IP Configuration" ip -$g_family addr list heading "IP Stats" ip -stat link list if qt mywhich brctl; then heading "Bridges" brctl show fi show_routing if [ $g_family -eq 4 ]; then heading "Per-IP Counters" perip_accounting fi heading "NF Accounting" show_nfacct heading "Events" show_events if qt mywhich setkey; then heading "PFKEY SPD" setkey -DP heading "PFKEY SAD" setkey -D | grep -Ev '^[[:space:]](A:|E:)' # Don't divulge the keys fi heading "/proc" show_proc /proc/version if [ $g_family -eq 4 ]; then show_proc /proc/sys/net/ipv4/ip_forward show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all for directory in /proc/sys/net/ipv4/conf/*; do for file in proxy_arp arp_filter arp_ignore rp_filter log_martians; do show_proc $directory/$file done done else for directory in /proc/sys/net/ipv6/conf/*; do for file in forwarding proxy_ra proxy_ndp; do show_proc $directory/$file done done fi if [ $g_family -eq 4 ]; then heading "ARP" if qt mywhich arp; then arp -na else ip -4 neigh ls ip -4 neigh ls proxy fi else heading "Neighbors" ip -6 neigh ls fi if qt mywhich lsmod; then heading "Modules" if [ $g_family -eq 4 ]; then lsmod | grep -E '^(ip_|ipt_|iptable_|nf_|xt_)' | sort else lsmod | grep -E '^(x_|ip6|nf_|xt_)' | sort fi fi determine_capabilities echo report_capabilities echo ss -${g_family}tunap if [ -n "$TC_ENABLED" ]; then heading "Traffic Control" show_tc heading "TC Filters" show_classifiers fi } dump_command() { do_dump_command | dump_filter } # # Restore Comand Executor # restore_command() { local finished finished=0 while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; n*) g_noroutes=Yes option=${option#n} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done case $# in 0) ;; 1) RESTOREFILE="$1" validate_restorefile '' ;; *) usage 1 ;; esac if [ -z "$STARTUP_ENABLED" ]; then error_message "ERROR: Startup is disabled" exit 2 fi g_restorepath=${VARDIR}/$RESTOREFILE [ -n "$g_nolock" ] || mutex_on if [ -x $g_restorepath ]; then progress_message3 "Restoring $g_product..." run_it $g_restorepath restore && progress_message3 "$g_product restored from ${VARDIR}/$RESTOREFILE" [ -n "$g_nolock" ] || mutex_off else echo "File $g_restorepath: file not found" [ -n "$g_nolock" ] || mutex_off exit 2 fi } # # Display the time that the counters were last reset # show_reset() { [ -f ${VARDIR}/restarted ] && \ echo "Counters reset $(cat ${VARDIR}/restarted)" && \ echo } # # Display's the passed file name followed by "=" and the file's contents. # show_proc() # $1 = name of a file { [ -f $1 ] && echo " $1 = $(cat $1)" } read_yesno_with_timeout() { local timeout timeout=${1:-60} case $timeout in *s) ;; *m) timeout=$((${timeout%m} * 60)) ;; *h) timeout=$((${timeout%h} * 3600)) ;; esac read -t $timeout yn 2> /dev/null if [ $? -eq 2 ] then # read doesn't support timeout test -x /bin/bash || return 2 # bash is not installed so the feature is not available /bin/bash -c "read -t $timeout yn ; if [ \"\$yn\" == \"y\" ] ; then exit 0 ; else exit 1 ; fi" # invoke bash and use its version of read return $? else # read supports timeout case "$yn" in y|Y) return 0 ;; *) return 1 ;; esac fi } # # Print a heading with leading and trailing black lines # heading() { echo echo "$@" echo } # # Create the appropriate -q option to pass onward # make_verbose() { local v v=$g_verbose_offset local option option=- if [ -n "$g_use_verbosity" ]; then echo "-v$g_use_verbosity" elif [ $g_verbose_offset -gt 0 ]; then while [ $v -gt 0 ]; do option="${option}v" v=$(($v - 1)) done echo $option elif [ $g_verbose_offset -lt 0 ]; then while [ $v -lt 0 ]; do option="${option}q" v=$(($v + 1)) done echo $option fi } # # Executor for drop,reject,... commands # block() # $1 = command, $2 = Finished, $3 - $n addresses { local chain chain=$1 local finished finished=$2 local which which='-s' local range range='--src-range' if ! chain_exists dynamic; then echo "Dynamic blacklisting is not enabled in the current $g_product configuration" >&2 [ -n "$g_nolock" ] || mutex_off exit 2 fi shift 3 while [ $# -gt 0 ]; do case $1 in from) which='-s' range='--src-range' shift continue ;; to) which='-d' range='--dst-range' shift continue ;; *-*) qt $g_tool -D dynamic -m iprange $range $1 -j reject qt $g_tool -D dynamic -m iprange $range $1 -j DROP qt $g_tool -D dynamic -m iprange $range $1 -j logreject qt $g_tool -D dynamic -m iprange $range $1 -j logdrop $g_tool -A dynamic -m iprange $range $1 -j $chain || break 1 ;; *) qt $g_tool -D dynamic $which $1 -j reject qt $g_tool -D dynamic $which $1 -j DROP qt $g_tool -D dynamic $which $1 -j logreject qt $g_tool -D dynamic $which $1 -j logdrop $g_tool -A dynamic $which $1 -j $chain || break 1 ;; esac echo "$1 $finished" shift done } # # Replace commas with spaces and echo the result # separate_list() { local list list="$@" local part local newlist local firstpart local lastpart local enclosure case "$list" in *,|,*|*,,*|*[[:space:]]*) # # There's been whining about us not catching embedded white space in # comma-separated lists. This is an attempt to snag some of the cases. # echo "WARNING -- invalid comma-separated list \"$@\"" >&2 ;; *\[*\]*) # # Where we need to embed comma-separated lists within lists, we enclose them # within square brackets. # firstpart=${list%%\[*} lastpart=${list#*\[} enclosure=${lastpart%%\]*} lastpart=${lastpart#*\]} case $lastpart in \,*) case $firstpart in *\,) echo "$(separate_list ${firstpart%,}) [$enclosure] $(separate_list ${lastpart#,})" ;; *) echo "$(separate_list $firstpart)[$enclosure] $(separate_list ${lastpart#,})" ;; esac ;; *) case $firstpart in *\,) echo "$(separate_list ${firstpart%,}) [$enclosure]$(separate_list $lastpart)" ;; *) echo "$(separate_list $firstpart)[$enclosure]$(separate_list $lastpart)" ;; esac ;; esac return ;; esac list="$@" part="${list%%,*}" newlist="$part" while [ "x$part" != "x$list" ]; do list="${list#*,}"; part="${list%%,*}"; newlist="$newlist $part"; done echo "$newlist" } # # add command executor # add_command() { local interface host hostlist zone ipset if ! product_is_started ; then fatal_error "$g_product Not Started" fi determine_ipset_version case $1 in *:*) while [ $# -gt 1 ]; do if [ $g_family -eq 4 ]; then interface=${1%%:*} host=${1#*:} else interface=${1%%|*} host=${1#*|} fi [ "$host" = "$1" ] && host= if [ -z "$host" ]; then if [ $g_family -eq 4 ]; then hostlist="$hostlist $interface:0.0.0.0/0" else hostlist="$hostlist $interface:::/0" fi else for h in $(separate_list $host); do hostlist="$hostlist $interface:$h" done fi shift done ;; *) ipset=$1 shift while [ $# -gt 0 ]; do for h in $(separate_list $1); do hostlist="$hostlist $h" done shift done ;; esac zone=$1 if [ -n "$zone" ]; then for host in $hostlist; do if [ $g_family -eq 4 ]; then interface=${host%:*} ipset=${zone}_${interface}; else interface=${host%%:*} ipset=6_${zone}_${interface}; fi if ! qt $IPSET -L $ipset; then fatal_error "Zone $zone, interface $interface does not have a dynamic host list" fi host=${host#*:} if $IPSET -A $ipset $host; then echo "Host $interface:$host added to zone $zone" else fatal_error "Unable to add $interface:$host to zone $zone" fi done else qt $IPSET -L $ipset || fatal_error "Zone $ipset is not dynamic" for host in $hostlist; do if $IPSET -A $ipset $host; then echo "Host $host added to zone $ipset" else fatal_error "Unable to add $host to zone $ipset" fi done fi } # # delete command executor # delete_command() { local interface host hostent hostlist zone ipset if ! product_is_started ; then fatal_error "$g_product Not Started" fi determine_ipset_version case $1 in *:*) while [ $# -gt 1 ]; do if [ $g_family -eq 4 ]; then interface=${1%%:*} host=${1#*:} else interface=${1%%|*} host=${1#*|} fi [ "$host" = "$1" ] && host= if [ -z "$host" ]; then if [ $g_family -eq 4 ]; then hostlist="$hostlist $interface:0.0.0.0/0" else hostlist="$hostlist $interface:::/0" fi else for h in $(separate_list $host); do hostlist="$hostlist $interface:$h" done fi shift done ;; *) ipset=$1 shift while [ $# -gt 0 ]; do for h in $(separate_list $1); do hostlist="$hostlist $h" done shift done ;; esac zone=$1 if [ -n "$zone" ]; then for host in $hostlist; do if [ $g_family -eq 4 ]; then interface=${host%:*} ipset=${zone}_${interface}; else interface=${host%%:*} ipset=6_${zone}_${interface}; fi if ! qt $IPSET -L $ipset -n; then fatal_error "Zone $zone, interface $interface does not have a dynamic host list" fi host=${host#*:} if $IPSET -D $ipset $host; then echo "Host $host deleted from zone $zone" else echo " WARNING: Unable to delete host $hostent to zone $zone" >&2 fi done else qt $IPSET -L $ipset -n || fatal_error "Zone $ipset is not dynamic" for host in $hostlist; do if $IPSET -D $ipset $host; then echo "Host $host deleted from to zone $ipset" else echo " WARNING: Unable to delete host $host from zone $zone" >&2 fi done fi } # # 'hits' commmand executor # hits_command() { local finished finished=0 local today today= while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; t*) today=$(date +'^%b %_d.*') option=${option#t} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done [ $# -eq 0 ] || usage 1 clear_term echo "$g_product $SHOREWALL_VERSION Hits at $g_hostname - $(date)" echo timeout=30 if $g_logread | grep -q "${today}IN=.* OUT=" ; then echo " HITS IP DATE" echo " ---- --------------- ------" $g_logread | grep "${today}IN=.* OUT=" | sed 's/\(.\{6\}\)\(.*SRC=\)\(.*\)\( DST=.*\)/\3 \1/' | sort | uniq -c | sort -rn | while read count address month day; do printf '%7d %-15s %3s %2d\n' $count $address $month $day done echo "" echo " HITS IP PORT" echo " ---- --------------- -----" $g_logread | grep "${today}IN=.* OUT=" | sed 's/\(.*SRC=\)\(.*\)\( DST=.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2 \4/ t s/\(.*SRC=\)\(.*\)\( DST=.*\)/\2/' | sort | uniq -c | sort -rn | while read count address port; do [ -z "$port" ] && port=0 printf '%7d %-15s %d\n' $count $address $port done echo "" echo " HITS DATE" echo " ---- ------" $g_logread | grep "${today}IN=.* OUT=" | sed 's/\(.\{6\}\)\(.*\)/\1/' | sort | uniq -c | sort -rn | while read count month day; do printf '%7d %3s %2d\n' $count $month $day done echo "" echo " HITS PORT SERVICE(S)" echo " ---- ----- ----------" $g_logread | grep "${today}IN=.* OUT=.*DPT" | sed 's/\(.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2/' | sort | uniq -c | sort -rn | while read count port ; do # List all services defined for the given port srv=$(grep "^[^#].*\\b$port/" /etc/services | cut -f 1 | cut -f 1 -d' ' | sort -u) srv=$(echo $srv | sed 's/ /,/g') if [ -n "$srv" ] ; then printf '%7d %5d %s\n' $count $port $srv else printf '%7d %5d\n' $count $port fi done fi } # # 'allow' command executor # allow_command() { [ -n "$g_debugging" ] && set -x [ $# -eq 1 ] && usage 1 if product_is_started ; then local which which='-s' local range range='--src-range' if ! chain_exists dynamic; then fatal_error "Dynamic blacklisting is not enabled in the current $g_product configuration" fi [ -n "$g_nolock" ] || mutex_on while [ $# -gt 1 ]; do shift case $1 in from) which='-s' range='--src-range' continue ;; to) which='-d' range='--dst-range' continue ;; *-*) if qt $g_tool -D dynamic -m iprange $range $1 -j reject ||\ qt $g_tool -D dynamic -m iprange $range $1 -j DROP ||\ qt $g_tool -D dynamic -m iprange $range $1 -j logdrop ||\ qt $g_tool -D dynamic -m iprange $range $1 -j logreject then echo "$1 Allowed" else echo "$1 Not Dropped or Rejected" fi ;; *) if qt $g_tool -D dynamic $which $1 -j reject ||\ qt $g_tool -D dynamic $which $1 -j DROP ||\ qt $g_tool -D dynamic $which $1 -j logdrop ||\ qt $g_tool -D dynamic $which $1 -j logreject then echo "$1 Allowed" else echo "$1 Not Dropped or Rejected" fi ;; esac done [ -n "$g_nolock" ] || mutex_off else error_message "ERROR: $g_product is not started" exit 2 fi } # # 'logwatch' command executor # logwatch_command() { shift finished=0 while [ $finished -eq 0 -a $# -ne 0 ]; do option=$1 case $option in -*) option=${option#-} [ -z "$option" ] && usage 1 while [ -n "$option" ]; do case $option in v*) VERBOSITY=$(($VERBOSITY + 1 )) option=${option#v} ;; q*) VERBOSITY=$(($VERBOSITY - 1 )) option=${option#q} ;; m*) g_showmacs=Yes option=${option#m} ;; -) finished=1 option= ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done [ -n "$g_debugging" ] && set -x if [ $# -eq 1 ]; then logwatch $1 elif [ $# -eq 0 ]; then logwatch 30 else usage 1 fi } # # Determine which optional facilities are supported by iptables/netfilter # determine_capabilities() { local tool local chain local chain1 local arptables if [ -z "$g_tool" ]; then [ $g_family -eq 4 ] && tool=iptables || tool=ip6tables g_tool=$(mywhich $tool) if [ -z "$g_tool" ]; then fatal-error "No executable $tool binary can be found on your PATH" fi fi qt $g_tool -t nat -L -n && NAT_ENABLED=Yes || NAT_ENABLED= qt $g_tool -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED= [ "$IP" = ip -o -z "$IP" ] && IP=$(which ip) [ -n "$IP" -a -x "$IP" ] || IP= [ "$TC" = tc -o -z "$TC" ] && TC=$(which tc) [ -n "$TC" -a -x "$TC" ] || TC= CONNTRACK_MATCH= NEW_CONNTRACK_MATCH= OLD_CONNTRACK_MATCH= MULTIPORT= XMULTIPORT= EMULTIPORT= POLICY_MATCH= PHYSDEV_MATCH= PHYSDEV_BRIDGE= IPRANGE_MATCH= RECENT_MATCH= REAP_OPTION= OWNER_MATCH= OWNER_NAME_MATCH= IPSET_MATCH= OLD_IPSET_MATCH= IPSET_V5= CONNMARK= XCONNMARK= CONNMARK_MATCH= XCONNMARK_MATCH= RAW_TABLE= RAWPOST_TABLE= IPP2P_MATCH= OLD_IPP2P_MATCH= LENGTH_MATCH= CLASSIFY_TARGET= ENHANCED_REJECT= USEPKTTYPE= KLUDGEFREE= MARK= XMARK= EXMARK= TPROXY_TARGET= MANGLE_FORWARD= COMMENTS= ADDRTYPE= TCPMSS_MATCH= HASHLIMIT_MATCH= NFQUEUE_TARGET= REALM_MATCH= HELPER_MATCH= CONNLIMIT_MATCH= TIME_MATCH= GOTO_TARGET= LOGMARK_TARGET= IPMARK_TARGET= LOG_TARGET=Yes ULOG_TARGET= NFLOG_TARGET= PERSISTENT_SNAT= FLOW_FILTER= FWMARK_RT_MASK= MARK_ANYWHERE= HEADER_MATCH= ACCOUNT_TARGET= AUDIT_TARGET= CONDITION_MATCH= IPTABLES_S= BASIC_FILTER= CT_TARGET= STATISTIC_MATCH= IMQ_TARGET= DSCP_MATCH= DSCP_TARGET= GEOIP_MATCH= RPFILTER_MATCH= NFACCT_MATCH= CHECKSUM_TARGET= ARPTABLESJF= MASQUERADE_TGT= UDPLITEREDIRECT= NEW_TOS_MATCH= AMANDA_HELPER= FTP_HELPER= FTP0_HELPER= IRC_HELPER= IRC0_HELPER= NETBIOS_NS_HELPER= H323_HELPER= PPTP_HELPER= SANE_HELPER= SANE0_HELPER= SIP_HELPER= SIP0_HELPER= SNMP_HELPER= TFTP_HELPER= TFTP0_HELPER= resolve_arptables if [ -n "$arptables" -a -x "$arptables" ]; then qt $arptables -L OUT && ARPTABLESJF=Yes fi chain=fooX$$ if [ -n "$NAT_ENABLED" ]; then if qt $g_tool -t nat -N $chain; then if [ $g_family -eq 4 ]; then qt $g_tool -t nat -A $chain -j SNAT --to-source 1.2.3.4 --persistent && PERSISTENT_SNAT=Yes else qt $g_tool -t nat -A $chain -j SNAT --to-source 2001::1 --persistent && PERSISTENT_SNAT=Yes fi qt $g_tool -t nat -A $chain -j MASQUERADE && MASQUERADE_TGT=Yes qt $g_tool -t nat -A $chain -p udplite -m multiport --dport 33 -j REDIRECT --to-port 22 && UDPREDIRECT=Yes qt $g_tool -t nat -F $chain qt $g_tool -t nat -X $chain fi fi qt $g_tool -F $chain qt $g_tool -X $chain if ! $g_tool -N $chain; then fatal_error "The command \"$g_tool -N $chain\" failed" fi chain1=${chain}1 qt $g_tool -F $chain1 qt $g_tool -X $chain1 if ! $g_tool -N $chain1; then qt $g_tool -X $CHAIN fatal_error "The command \"$g_tool -N $chain1\" failed" fi if ! qt $g_tool -A $chain -m state --state ESTABLISHED,RELATED -j ACCEPT && ! qt $g_tool -A $chain -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT; then qt $g_tool -x $chain qt $g_tool -x $chain1 fatal_error "Your kernel lacks connection tracking and/or state matching -- $g_product will not run on this system" fi if [ $g_family -eq 4 ]; then qt $g_tool -A $chain -m conntrack --ctorigdst 192.168.1.1 -j ACCEPT && CONNTRACK_MATCH=Yes else qt $g_tool -A $chain -m conntrack --ctorigdst ::1 -j ACCEPT && CONNTRACK_MATCH=Yes fi if [ -n "$CONNTRACK_MATCH" ]; then qt $g_tool -A $chain -m conntrack -p tcp --ctorigdstport 22 -j ACCEPT && NEW_CONNTRACK_MATCH=Yes if [ $g_family -eq 4 ]; then qt $g_tool -A $chain -m conntrack ! --ctorigdst 1.2.3.4 || OLD_CONNTRACK_MATCH=Yes else qt $g_tool -A $chain -m conntrack ! --ctorigdst ::1 || OLD_CONNTRACK_MATCH=Yes fi fi if qt $g_tool -A $chain -p tcp -m multiport --dports 21,22 -j ACCEPT; then MULTIPORT=Yes qt $g_tool -A $chain -p tcp -m multiport --sports 60 -m multiport --dports 99 -j ACCEPT && KLUDEFREE=Yes fi qt $g_tool -A $chain -p tcp -m multiport --dports 21:22 -j ACCEPT && XMULTIPORT=Yes qt $g_tool -A $chain -p sctp -m multiport --dports 21,22 -j ACCEPT && EMULTIPORT=Yes qt $g_tool -A $chain -m policy --pol ipsec --mode tunnel --dir in -j ACCEPT && POLICY_MATCH=Yes if qt $g_tool -A $chain -m physdev --physdev-out eth0 -j ACCEPT; then PHYSDEV_MATCH=Yes qt $g_tool -A $chain -m physdev --physdev-is-bridged --physdev-in eth0 --physdev-out eth0 -j ACCEPT && PHYSDEV_BRIDGE=Yes if [ -z "${KLUDGEFREE}" ]; then qt $g_tool -A $chain -m physdev --physdev-in eth0 -m physdev --physdev-out eth0 -j ACCEPT && KLUDGEFREE=Yes fi fi if [ $g_family -eq 4 ]; then if qt $g_tool -A $chain -m iprange --src-range 192.168.1.5-192.168.1.124 -j ACCEPT; then IPRANGE_MATCH=Yes if [ -z "${KLUDGEFREE}" ]; then qt $g_tool -A $chain -m iprange --src-range 192.168.1.5-192.168.1.124 -m iprange --dst-range 192.168.1.5-192.168.1.124 -j ACCEPT && KLUDGEFREE=Yes fi fi elif qt $g_tool -A $chain -m iprange --src-range ::1-::2 -j ACCEPT; then IPRANGE_MATCH=Yes if [ -z "${KLUDGEFREE}" ]; then qt $g_tool -A $chain -m iprange --src-range ::1-::2 -m iprange --dst-range ::1-::2 -j ACCEPT && KLUDGEFREE=Yes fi fi if qt $g_tool -A $chain -m recent --update -j ACCEPT; then RECENT_MATCH=Yes qt $g_tool -A $chain -m recent --rcheck --seconds 10 --reap && REAP_OPTION=Yes fi qt $g_tool -A $chain -m owner --uid-owner 0 -j ACCEPT && OWNER_MATCH=Yes local name name=$(id -un 2> /dev/null) [ -n "$name" ] && qt $g_tool -A $chain -m owner --uid-owner $name -j ACCEPT && OWNER_NAME_MATCH=Yes if qt $g_tool -A $chain -m connmark --mark 2 -j ACCEPT; then CONNMARK_MATCH=Yes qt $g_tool -A $chain -m connmark --mark 2/0xFF -j ACCEPT && XCONNMARK_MATCH=Yes fi qt $g_tool -A $chain -p tcp -m ipp2p --edk -j ACCEPT && IPP2P_MATCH=Yes if [ -n "$IPP2P_MATCH" ]; then qt $g_tool -A $chain -p tcp -m ipp2p --ipp2p -j ACCEPT && OLD_IPP2P_MATCH=Yes fi qt $g_tool -A $chain -m length --length 10:20 -j ACCEPT && LENGTH_MATCH=Yes if [ $g_family -eq 4 ]; then qt $g_tool -A $chain -j REJECT --reject-with icmp-host-prohibited && ENHANCED_REJECT=Yes else qt $g_tool -A $chain -j REJECT --reject-with icmp6-adm-prohibited && ENHANCED_REJECT=Yes fi qt $g_tool -A $chain -j ACCEPT -m comment --comment "This is a comment" && COMMENTS=Yes if [ -n "$NFACCT" -a ! -x "$NFACCT" ]; then error_message "WARNING: NFACCT=$NFACCT does not exist or is not executable" NFACCT= else NFACCT=$(mywhich nfacct) fi if [ -n "$NFACCT" ] && qt $NFACCT add $chain; then qt $g_tool -A $chain -m nfacct --nfacct-name $chain && NFACCT_MATCH=Yes qt $g_tool -D $chain -m nfacct --nfacct-name $chain qt $NFACCT del $chain fi if [ -n "$MANGLE_ENABLED" ]; then qt $g_tool -t mangle -N $chain if qt $g_tool -t mangle -A $chain -j MARK --set-mark 1; then MARK=Yes qt $g_tool -t mangle -A $chain -j MARK --and-mark 0xFF && XMARK=Yes qt $g_tool -t mangle -A $chain -j MARK --set-mark 1/0xFF && EXMARK=Yes fi if qt $g_tool -t mangle -A $chain -j CONNMARK --save-mark; then CONNMARK=Yes qt $g_tool -t mangle -A $chain -j CONNMARK --save-mark --mask 0xFF && XCONNMARK=Yes fi qt $g_tool -t mangle -A $chain -j CLASSIFY --set-class 1:1 && CLASSIFY_TARGET=Yes qt $g_tool -t mangle -A $chain -j IPMARK --addr src && IPMARK_TARGET=Yes qt $g_tool -t mangle -A $chain -p tcp -j TPROXY --on-port 0 --tproxy-mark 1 && TPROXY_TARGET=Yes qt $g_tool -t mangle -A $chain -j IMQ --todev 0 && IMQ_TARGET=Yes qt $g_tool -t mangle -A $chain -m dscp --dscp 0 && DSCP_MATCH=Yes qt $g_tool -t mangle -A $chain -j DSCP --set-dscp 0 && DSCP_TARGET=Yes qt $g_tool -t mangle -A $chain -m rpfilter && RPFILTER_MATCH=Yes qt $g_tool -t mangle -A $chain -j CHECKSUM --checksum-fill && CHECKSUM_TARGET=Yes qt $g_tool -t mangle -A $chain -m tos --tos 0x10/0xff && NEW_TOS_MATCH=Yes qt $g_tool -t mangle -F $chain qt $g_tool -t mangle -X $chain qt $g_tool -t mangle -L FORWARD -n && MANGLE_FORWARD=Yes fi qt $g_tool -t raw -L -n && RAW_TABLE=Yes qt $g_tool -t rawpost -L -n && RAWPOST_TABLE=Yes if [ -n "$RAW_TABLE" ]; then qt $g_tool -t raw -F $chain qt $g_tool -t raw -X $chain qt $g_tool -t raw -N $chain if qt $g_tool -t raw -A $chain -j CT --notrack; then CT_TARGET=Yes; qt $g_tool -t raw -A $chain -p udp --dport 10080 -j CT --helper amanda && AMANDA_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 21 -j CT --helper ftp && FTP_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 21 -j CT --helper ftp-0 && FTP0_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 1719 -j CT --helper RAS && H323_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 6667 -j CT --helper irc && IRC_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 6667 -j CT --helper irc-0 && IRC0_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 137 -j CT --helper netbios-ns && NETBIOS_NS_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 1729 -j CT --helper pptp && PPTP_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 6566 -j CT --helper sane && SANE_HELPER=Yes qt $g_tool -t raw -A $chain -p tcp --dport 6566 -j CT --helper sane-0 && SANE0_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 5060 -j CT --helper sip && SIP_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 5060 -j CT --helper sip-0 && SIP0_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 161 -j CT --helper snmp && SNMP_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 69 -j CT --helper tftp && TFTP_HELPER=Yes qt $g_tool -t raw -A $chain -p udp --dport 69 -j CT --helper tftp-0 && TFTP0_HELPER=Yes fi qt $g_tool -t raw -F $chain qt $g_tool -t raw -X $chain fi if qt mywhich ipset; then qt ipset -X $chain # Just in case something went wrong the last time local have_ipset if [ $g_family -eq 4 ]; then if qt ipset -N $chain hash:ip family inet; then IPSET_V5=Yes have_ipset=Yes elif qt ipset -N $chain iphash ; then have_ipset=Yes fi if [ -n "$have_ipset" ]; then if qt $g_tool -A $chain -m set --match-set $chain src -j ACCEPT; then qt $g_tool -F $chain IPSET_MATCH=Yes elif qt $g_tool -A $chain -m set --set $chain src -j ACCEPT; then qt $g_tool -F $chain IPSET_MATCH=Yes OLD_IPSET_MATCH=Yes fi qt ipset -X $chain fi elif qt ipset -N $chain hash:ip family inet6; then IPSET_V5=Yes if qt $g_tool -A $chain -m set --match-set $chain src -j ACCEPT; then qt $g_tool -F $chain IPSET_MATCH=Yes elif qt $g_tool -A $chain -m set --set $chain src -j ACCEPT; then qt $g_tool -F $chain IPSET_MATCH=Yes OLD_IPSET_MATCH=Yes fi qt ipset -X $chain fi fi qt $g_tool -A $chain -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes qt $g_tool -A $chain -m addrtype --src-type BROADCAST -j ACCEPT && ADDRTYPE=Yes qt $g_tool -A $chain -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT && TCPMSS_MATCH=Yes qt $g_tool -A $chain -m hashlimit --hashlimit-upto 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes if [ -z "$HASHLIMIT_MATCH" ]; then qt $g_tool -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && OLD_HL_MATCH=Yes HASHLIMIT_MATCH=$OLD_HL_MATCH fi qt $g_tool -A $chain -j NFQUEUE --queue-num 4 && NFQUEUE_TARGET=Yes qt $g_tool -A $chain -m realm --realm 4 && REALM_MATCH=Yes # # -m helper doesn't verify the existence of the specified helper :-( # if qt $g_tool -A $chain -p tcp --dport 21 -m helper --helper ftp; then HELPER_MATCH=Yes if [ -z "$CT_TARGET" ]; then AMANDA_HELPER=Yes FTP_HELPER=Yes FTP_HELPER=Yes H323_HELPER=Yes IRC_HELPER=Yes NS_HELPER=Yes PPTP_HELPER=Yes SANE_HELPER=Yes SIP_HELPER=Yes SNMP_HELPER=Yes TFTP_HELPER=Yes fi fi qt $g_tool -A $chain -m connlimit --connlimit-above 8 -j DROP && CONNLIMIT_MATCH=Yes qt $g_tool -A $chain -m time --timestart 23:00 -j DROP && TIME_MATCH=Yes qt $g_tool -A $chain -g $chain1 && GOTO_TARGET=Yes qt $g_tool -A $chain -j LOGMARK && LOGMARK_TARGET=Yes qt $g_tool -A $chain -j LOG || LOG_TARGET= qt $g_tool -A $chain -j ULOG && ULOG_TARGET=Yes qt $g_tool -A $chain -j NFLOG && NFLOG_TARGET=Yes qt $g_tool -A $chain -j MARK --set-mark 5 && MARK_ANYWHERE=Yes qt $g_tool -A $chain -m statistic --mode nth --every 2 --packet 1 && STATISTIC_MATCH=Yes qt $g_tool -A $chain -m geoip --src-cc US && GEOIP_MATCH=Yes if [ $g_family -eq 4 ]; then qt $g_tool -A $chain -j ACCOUNT --addr 192.168.1.0/29 --tname $chain && ACCOUNT_TARGET=Yes else qt $g_tool -A $chain -m ipv6header --header 255 && HEADER_MATCH=Yes qt $g_tool -A $chain -j ACCOUNT --addr ::1/122 --tname $chain && ACCOUNT_TARGET=Yes fi qt $g_tool -A $chain -j AUDIT --type drop && AUDIT_TARGET=Yes qt $g_tool -A $chain -m condition --condition foo && CONDITION_MATCH=Yes qt $g_tool -S INPUT && IPTABLES_S=Yes qt $g_tool -F $chain qt $g_tool -X $chain qt $g_tool -F $chain1 qt $g_tool -X $chain1 [ -n "$TC" ] && $TC filter add flow help 2>&1 | grep -q ^Usage && FLOW_FILTER=Yes [ -n "$TC" ] && $TC filter add basic help 2>&1 | grep -q ^Usage && BASIC_FILTER=Yes [ -n "$IP" ] && $IP rule add help 2>&1 | grep -q /MASK && FWMARK_RT_MASK=Yes CAPVERSION=$SHOREWALL_CAPVERSION KERNELVERSION=$(uname -r 2> /dev/null | sed -e 's/-.*//') case "$KERNELVERSION" in *.*.*) KERNELVERSION=$(printf "%d%02d%02d" $(echo $KERNELVERSION | sed -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2 \3/g')) ;; *) KERNELVERSION=$(printf "%d%02d00" $(echo $KERNELVERSION | sed -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2/g')) ;; esac } report_capabilities_unsorted() { report_capability() # $1 = Capability Description , $2 Capability Setting (if any) { local setting setting= [ "x$2" = "xYes" ] && setting="Available" || setting="Not available" echo " " $1: $setting } report_capability "NAT (NAT_ENABLED)" $NAT_ENABLED report_capability "Packet Mangling (MANGLE_ENABLED)" $MANGLE_ENABLED report_capability "Multi-port Match (MULTIPORT)" $MULTIPORT [ -n "$MULTIPORT" ] && report_capability "Extended Multi-port Match (XMULIPORT)" $XMULTIPORT [ -n "$EMULTIPORT" ] && report_capability "Enhanced Multi-port Match (EMULIPORT)" $EMULTIPORT report_capability "Connection Tracking Match (CONNTRACK_MATCH)" $CONNTRACK_MATCH if [ -n "$CONNTRACK_MATCH" ]; then report_capability "Extended Connection Tracking Match Support (NEW_CONNTRACK_MATCH)" $NEW_CONNTRACK_MATCH [ -n "$OLD_CONNTRACK_MATCH" ] && report_capability "Old Connection Tracking Match Syntax (OLD_CONNTRACK_MATCH)" $OLD_CONNTRACK_MATCH fi report_capability "Packet Type Match (USEPKTTYPE)" $USEPKTTYPE report_capability "Policy Match (POLICY_MATCH)" $POLICY_MATCH report_capability "Physdev Match (PHYSDEV_MATCH)" $PHYSDEV_MATCH report_capability "Physdev-is-bridged Support (PHYSDEV_BRIDGE)" $PHYSDEV_BRIDGE report_capability "Packet length Match (LENGTH_MATCH)" $LENGTH_MATCH report_capability "IP range Match(IPRANGE_MATCH)" $IPRANGE_MATCH report_capability "Recent Match (RECENT_MATCH)" $RECENT_MATCH [ -n "$RECENT_MATCH" ] && report_capability 'Recent Match "--reap" option (REAP_OPTION)' report_capability "Owner Match (OWNER_MATCH)" $OWNER_MATCH report_capability "Owner Name Match (OWNER_NAME_MATCH)" $OWNER_NAME_MATCH if [ -n "$IPSET_MATCH" ]; then report_capability "Ipset Match (IPSET_MATCH)" $IPSET_MATCH [ -n "$OLD_IPSET_MATCH" ] && report_capability "OLD_Ipset Match (OLD_IPSET_MATCH)" $OLD_IPSET_MATCH fi report_capability "CONNMARK Target (CONNMARK)" $CONNMARK [ -n "$CONNMARK" ] && report_capability "Extended CONNMARK Target (XCONNMARK)" $XCONNMARK report_capability "Connmark Match (CONNMARK_MATCH)" $CONNMARK_MATCH [ -n "$CONNMARK_MATCH" ] && report_capability "Extended Connmark Match (XCONNMARK_MATCH)" $XCONNMARK_MATCH report_capability "Raw Table (RAW_TABLE)" $RAW_TABLE report_capability "Rawpost Table (RAWPOST_TABLE)" $RAWPOST_TABLE report_capability "IPP2P Match (IPP2P_MATCH)" $IPP2P_MATCH [ -n "$OLD_IPP2P_MATCH" ] && report_capability "Old IPP2P Match Syntax (OLD_IPP2P_MATCH)" $OLD_IPP2P_MATCH report_capability "CLASSIFY Target (CLASSIFY_TARGET)" $CLASSIFY_TARGET report_capability "Extended REJECT (ENHANCED_REJECT)" $ENHANCED_REJECT report_capability "Repeat match (KLUDGEFREE)" $KLUDGEFREE report_capability "MARK Target (MARK)" $MARK [ -n "$MARK" ] && report_capability "Extended MARK Target (XMARK)" $XMARK [ -n "$XMARK" ] && report_capability "Extended MARK Target 2 (EXMARK)" $EXMARK report_capability "Mangle FORWARD Chain (MANGLE_FORWARD)" $MANGLE_FORWARD report_capability "Comments (COMMENTS)" $COMMENTS report_capability "Address Type Match (ADDRTYPE)" $ADDRTYPE report_capability "TCPMSS Match (TCPMSS_MATCH)" $TCPMSS_MATCH report_capability "Hashlimit Match (HASHLIMIT_MATCH)" $HASHLIMIT_MATCH [ -n "$OLD_HL_MATCH" ] && report_capability "Old Hashlimit Match (OLD_HL_MATCH)" $OLD_HL_MATCH report_capability "NFQUEUE Target (NFQUEUE_TARGET)" $NFQUEUE_TARGET report_capability "Realm Match (REALM_MATCH)" $REALM_MATCH report_capability "Helper Match (HELPER_MATCH)" $HELPER_MATCH report_capability "Connlimit Match (CONNLIMIT_MATCH)" $CONNLIMIT_MATCH report_capability "Time Match (TIME_MATCH)" $TIME_MATCH report_capability "Goto Support (GOTO_TARGET)" $GOTO_TARGET report_capability "LOGMARK Target (LOGMARK_TARGET)" $LOGMARK_TARGET report_capability "IPMARK Target (IPMARK_TARGET)" $IPMARK_TARGET report_capability "LOG Target (LOG_TARGET)" $LOG_TARGET report_capability "ULOG Target (ULOG_TARGET)" $ULOG_TARGET report_capability "NFLOG Target (NFLOG_TARGET)" $NFLOG_TARGET report_capability "Persistent SNAT (PERSISTENT_SNAT)" $PERSISTENT_SNAT report_capability "TPROXY Target (TPROXY_TARGET)" $TPROXY_TARGET report_capability "FLOW Classifier (FLOW_FILTER)" $FLOW_FILTER report_capability "fwmark route mask (FWMARK_RT_MASK)" $FWMARK_RT_MASK report_capability "Mark in the filter table (MARK_ANYWHERE)" $MARK_ANYWHERE report_capability "Header Match (HEADER_MATCH)" $HEADER_MATCH report_capability "ACCOUNT Target (ACCOUNT_TARGET)" $ACCOUNT_TARGET report_capability "AUDIT Target (AUDIT_TARGET)" $AUDIT_TARGET report_capability "ipset V5 (IPSET_V5)" $IPSET_V5 report_capability "Condition Match (CONDITION_MATCH)" $CONDITION_MATCH report_capability "Statistic Match (STATISTIC_MATCH)" $STATISTIC_MATCH report_capability "IMQ Target (IMQ_TARGET)" $IMQ_TARGET report_capability "DSCP Match (DSCP_MATCH)" $DSCP_MATCH report_capability "DSCP Target (DSCP_TARGET)" $DSCP_TARGET report_capability "Geo IP match" $GEOIP_MATCH report_capability "RPFilter match" $RPFILTER_MATCH report_capability "NFAcct match" $NFACCT_MATCH report_capability "Checksum Target" $CHECKSUM_TARGET report_capability "Arptables JF" $ARPTABLESJF report_capability "MASQUERADE Target" $MASQUERADE_TGT report_capability "UDPLITE Port Redirection" $UDPLITEREDIRECT report_capability "New tos Match" $NEW_TOS_MATCH report_capability "Amanda Helper" $AMANDA_HELPER report_capability "FTP Helper" $FTP_HELPER report_capability "FTP-0 Helper" $FTP0_HELPER report_capability "IRC Helper" $IRC_HELPER report_capability "IRC-0 Helper" $IRC0_HELPER report_capability "Netbios_ns Helper" $NETBIOS_NS_HELPER report_capability "H323 Helper" $H323_HELPER report_capability "PPTP Helper" $PPTP_HELPER report_capability "SANE Helper" $SANE_HELPER report_capability "SANE-0 Helper" $SANE0_HELPER report_capability "SIP Helper" $SIP_HELPER report_capability "SIP-0 Helper" $SIP0_HELPER report_capability "SNMP Helper" $SNMP_HELPER report_capability "TFTP Helper" $TFTP_HELPER report_capability "TFTP-0 Helper" $TFTP0_HELPER if [ $g_family -eq 4 ]; then report_capability "iptables -S (IPTABLES_S)" $IPTABLES_S else report_capability "ip6tables -S (IPTABLES_S)" $IPTABLES_S fi report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER report_capability "CT Target (CT_TARGET)" $CT_TARGET echo " Kernel Version (KERNELVERSION): $KERNELVERSION" echo " Capabilities Version (CAPVERSION): $CAPVERSION" } report_capabilities() { if [ $VERBOSITY -gt 1 ]; then echo "$g_product has detected the following iptables/netfilter capabilities:" report_capabilities_unsorted | sort fi [ -n "$PKTTYPE" ] || USEPKTTYPE= } report_capabilities_unsorted1() { report_capability1() # $1 = Capability { eval echo $1=\$$1 } report_capability1 NAT_ENABLED report_capability1 MANGLE_ENABLED report_capability1 MULTIPORT report_capability1 XMULTIPORT report_capability1 EMULTIPORT report_capability1 CONNTRACK_MATCH report_capability1 NEW_CONNTRACK_MATCH report_capability1 OLD_CONNTRACK_MATCH report_capability1 USEPKTTYPE report_capability1 POLICY_MATCH report_capability1 PHYSDEV_MATCH report_capability1 PHYSDEV_BRIDGE report_capability1 LENGTH_MATCH report_capability1 IPRANGE_MATCH report_capability1 RECENT_MATCH report_capability1 REAP_OPTION report_capability1 OWNER_MATCH report_capability1 OWNER_NAME_MATCH report_capability1 IPSET_MATCH report_capability1 OLD_IPSET_MATCH report_capability1 CONNMARK report_capability1 XCONNMARK report_capability1 CONNMARK_MATCH report_capability1 XCONNMARK_MATCH report_capability1 RAW_TABLE report_capability1 RAWPOST_TABLE report_capability1 IPP2P_MATCH report_capability1 OLD_IPP2P_MATCH report_capability1 CLASSIFY_TARGET report_capability1 ENHANCED_REJECT report_capability1 KLUDGEFREE report_capability1 MARK report_capability1 XMARK report_capability1 EXMARK report_capability1 MANGLE_FORWARD report_capability1 COMMENTS report_capability1 ADDRTYPE report_capability1 TCPMSS_MATCH report_capability1 HASHLIMIT_MATCH report_capability1 OLD_HL_MATCH report_capability1 NFQUEUE_TARGET report_capability1 REALM_MATCH report_capability1 HELPER_MATCH report_capability1 CONNLIMIT_MATCH report_capability1 TIME_MATCH report_capability1 GOTO_TARGET report_capability1 LOGMARK_TARGET report_capability1 IPMARK_TARGET report_capability1 LOG_TARGET report_capability1 ULOG_TARGET report_capability1 NFLOG_TARGET report_capability1 PERSISTENT_SNAT report_capability1 TPROXY_TARGET report_capability1 FLOW_FILTER report_capability1 FWMARK_RT_MASK report_capability1 MARK_ANYWHERE report_capability1 HEADER_MATCH report_capability1 ACCOUNT_TARGET report_capability1 AUDIT_TARGET report_capability1 IPSET_V5 report_capability1 CONDITION_MATCH report_capability1 IPTABLES_S report_capability1 BASIC_FILTER report_capability1 CT_TARGET report_capability1 STATISTIC_MATCH report_capability1 IMQ_TARGET report_capability1 DSCP_MATCH report_capability1 DSCP_TARGET report_capability1 GEOIP_MATCH report_capability1 RPFILTER_MATCH report_capability1 NFACCT_MATCH report_capability1 CHECKSUM_TARGET report_capability1 ARPTABLESJF report_capability1 MASQUERADE_TGT report_capability1 UDPLITEREDIRECT report_capability1 NEW_TOS_MATCH report_capability1 AMANDA_HELPER report_capability1 FTP_HELPER report_capability1 FTP0_HELPER report_capability1 IRC_HELPER report_capability1 IRC0_HELPER report_capability1 NETBIOS_NS_HELPER report_capability1 H323_HELPER report_capability1 PPTP_HELPER report_capability1 SANE_HELPER report_capability1 SANE0_HELPER report_capability1 SIP_HELPER report_capability1 SIP0_HELPER report_capability1 SNMP_HELPER report_capability1 TFTP_HELPER report_capability1 TFTP0_HELPER echo CAPVERSION=$SHOREWALL_CAPVERSION echo KERNELVERSION=$KERNELVERSION } report_capabilities1() { echo "#" echo "# $g_product $SHOREWALL_VERSION detected the following iptables/netfilter capabilities - $(date)" echo "#" report_capabilities_unsorted1 | sort } show_status() { if product_is_started ; then [ $VERBOSITY -ge 1 ] && echo "$g_product is running" status=0 else [ $VERBOSITY -ge 1 ] && echo "$g_product is stopped" status=4 fi if [ -f ${VARDIR}/state ]; then state="$(cat ${VARDIR}/state)" case $state in Stopped*|Closed*|Clear*) status=3 ;; esac else state=Unknown fi if [ $VERBOSITY -ge 1 ]; then echo "State:$state" if [ -f $g_firewall ]; then echo $g_echo_n "$g_firewall was compiled by Shorewall version " $g_firewall version fi fi } status_command() { [ $VERBOSITY -ge 1 ] && echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)" && echo show_status [ $VERBOSITY -ge 1 ] && echo exit $status } drop_command() { if product_is_started ; then if ! chain_exists dynamic; then echo "Dynamic blacklisting is not supported in the current $g_product configuration" exit 2 fi [ -n "$g_nolock" ] || mutex_on block DROP Dropped $* [ -n "$g_nolock" ] || mutex_off else fatal_error "$g_product is not started" fi } logdrop_command() { if product_is_started ; then if ! chain_exists dynamic; then echo "Dynamic blacklisting is not supported in the current $g_product configuration" exit 2 fi [ -n "$g_nolock" ] || mutex_on block logdrop Dropped $* [ -n "$g_nolock" ] || mutex_off else fatal_error "$g_product is not started" fi } reject_command() { if product_is_started ; then [ -n "$g_nolock" ] || mutex_on block $1 Rejected $* [ -n "$g_nolock" ] || mutex_off else fatal_error "$g_product is not started" fi } save_command() { case $# in 1) ;; 2) RESTOREFILE="$2" validate_restorefile '' ;; *) usage 1 ;; esac g_restorepath=${VARDIR}/$RESTOREFILE [ -n "$g_nolock" ] || mutex_on save_config result=$? [ -n "$g_nolock" ] || mutex_off exit $result } forget_command() { case $# in 1) ;; 2) RESTOREFILE="$2" validate_restorefile '' ;; *) usage 1 ;; esac g_restorepath=${VARDIR}/$RESTOREFILE if [ -x $g_restorepath ]; then rm -f $g_restorepath rm -f ${g_restorepath}-iptables rm -f ${g_restorepath}-ipsets rm -f ${g_restorepath}-arptables echo " $g_restorepath removed" elif [ -f $g_restorepath ]; then echo " $g_restorepath exists and is not a saved $g_product configuration" fi rm -f ${VARDIR}/save } ipcalc_command() { local address local vlsm [ $g_family -eq 6 ] && usage 1 if [ $# -eq 2 ]; then address=${2%/*} vlsm=${2#*/} elif [ $# -eq 3 ]; then address=$2 vlsm=$(ip_vlsm $3) else usage 1 fi valid_address $address || fatal_error "Invalid IP address: $address" [ -z "$vlsm" ] && usage 2 [ "x$address" = "x$vlsm" ] && usage 2 [ $vlsm -gt 32 ] && fatal_error "Invalid VLSM: /$vlsm" address=$address/$vlsm echo " CIDR=$address" temp=$(ip_netmask $address); echo " NETMASK=$(encodeaddr $temp)" temp=$(ip_network $address); echo " NETWORK=$temp" temp=$(broadcastaddress $address); echo " BROADCAST=$temp" } iprange_command() { local range [ $g_family -eq 6 ] && usage 1 range='' while [ $# -gt 0 ]; do shift range="${range}${1}" done case $range in *.*.*.*-*.*.*.*) for address in ${range%-*} ${range#*-}; do valid_address $address || fatal_error "Invalid IP address: $address" done ip_range $range ;; *) usage 1 ;; esac } ipdecimal_command() { [ $# -eq 2 ] || usage 1 [ $g_family -eq 6 ] && usage 1 case $2 in *.*.*.*) valid_address $2 || fatal_error "Invalid IP address: $2" echo " $(decodeaddr $2)" ;; *) echo " $(encodeaddr $2)" ;; esac } iptrace_command() { if product_is_started ; then $g_tool -t raw -A PREROUTING $@ -j TRACE $g_tool -t raw -A OUTPUT $@ -j TRACE else fatal_error "$g_product is not started" fi } noiptrace_command() { if product_is_started ; then $g_tool -t raw -D PREROUTING $@ -j TRACE $g_tool -t raw -D OUTPUT $@ -j TRACE else fatal_error "$g_product is not started" fi } # # Set the configuration variables from shorewall-lite.conf # get_config() { ensure_config_path config=$(find_file ${g_program}.conf) if [ -f $config ]; then if [ -r $config ]; then . $config else fatal_error "Cannot read $config! (Hint: Are you root?)" fi else fatal_error "$config does not exist!" fi ensure_config_path [ -f ${VARDIR}/firewall.conf ] && . ${VARDIR}/firewall.conf [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages if ( ps ax 2> /dev/null | grep -v grep | qt grep 'syslogd.*-C' ) ; then g_logread="logread | tac" elif [ -r $LOGFILE ]; then g_logread="tac $LOGFILE" else fatal_error "LOGFILE ($LOGFILE) does not exist!" fi # # See if we have a real version of "tail" -- use separate redirection so # that ash (aka /bin/sh on LRP) doesn't crap # if ( tail -n5 /dev/null > /dev/null 2> /dev/null ) ; then realtail="Yes" else realtail="" fi [ -n "$FW" ] || FW=fw if [ $g_family -eq 4 ]; then if [ -n "$IPTABLES" ]; then if [ ! -x "$IPTABLES" ]; then fatal_error "The program specified in IPTABLES does not exist or is not executable" fi else IPTABLES=$(mywhich iptables 2> /dev/null) if [ -z "$IPTABLES" ] ; then fatal_error "Can't find iptables executable" fi fi g_tool=$IPTABLES else if [ -n "$IP6TABLES" ]; then if [ ! -x "$IP6TABLES" ]; then fatal_error "The program specified in IP6TABLES does not exist or is not executable" fi else IP6TABLES=$(mywhich ip6tables 2> /dev/null) if [ -z "$IP6TABLES" ] ; then fatal_error "Can't find ip6tables executable" fi fi g_tool=$IP6TABLES fi if [ -n "$SHOREWALL_SHELL" ]; then if [ ! -x "$SHOREWALL_SHELL" ]; then echo " WARNING: The program specified in SHOREWALL_SHELL does not exist or is not executable; falling back to /bin/sh" >&2 SHOREWALL_SHELL=/bin/sh fi fi [ -n "$RESTOREFILE" ] || RESTOREFILE=restore validate_restorefile RESTOREFILE [ -n "${VERBOSITY:=2}" ] [ -n "$g_use_verbosity" ] && VERBOSITY=$g_use_verbosity || VERBOSITY=$(($g_verbose_offset + $VERBOSITY)) if [ $VERBOSITY -lt -1 ]; then VERBOSITY=-1 elif [ $VERBOSITY -gt 2 ]; then VERBOSITY=2 fi g_hostname=$(hostname 2> /dev/null) IP=$(mywhich ip 2> /dev/null) if [ -z "$IP" ] ; then fatal_error "Can't find ip executable" fi if [ -n "$IPSET" ]; then case "$IPSET" in */*) if [ ! -x "$IPSET" ] ; then fatal_error "The program specified in IPSET ($IPSET) does not exist or is not executable" fi ;; *) prog="$(mywhich $IPSET 2> /dev/null)" if [ -z "$prog" ] ; then fatal_error "Can't find $IPSET executable" fi IPSET=$prog ;; esac else IPSET='' fi TC=tc } # # Verify that we have a compiled firewall script # verify_firewall_script() { if [ ! -f $g_firewall ]; then echo " ERROR: $g_product is not properly installed" >&2 if [ -L $g_firewall ]; then echo " $g_firewall is a symbolic link to a" >&2 echo " non-existant file" >&2 else echo " The file $g_firewall does not exist" >&2 fi exit 2 fi } ################################################################################ # The remaining functions are used by the Lite cli - they are overloaded by # the Standard CLI by loading lib.cli-std ################################################################################ # # Start Command Executor # start_command() { local finished finished=0 do_it() { local rc rc=0 [ -n "$g_nolock" ] || mutex_on if [ -x ${VARDIR}/firewall ]; then run_it ${VARDIR}/firewall $g_debugging start rc=$? else error_message "${VARDIR}/firewall is missing or is not executable" logger -p kern.err "ERROR:$g_product start failed" rc=2 fi [ -n "$g_nolock" ] || mutex_off exit $rc } verify_firewall_script if product_is_started; then if [ $g_family -eq 4 ]; then error_message "Shorewall is already running" else error_message "Shorewall6 is already running" fi exit 0 fi while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; p*) [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system" g_purge=Yes option=${option%p} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done case $# in 0) ;; *) usage 1 ;; esac do_it } # # Restart Command Executor # restart_command() { local finished finished=0 local rc rc=0 verify_firewall_script while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; n*) g_noroutes=Yes option=${option#n} ;; p*) [ -n "$(mywhich conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system" g_purge=Yes option=${option%p} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done case $# in 0) ;; *) usage 1 ;; esac [ -n "$g_nolock" ] || mutex_on if [ -x ${VARDIR}/firewall ]; then run_it ${VARDIR}/firewall $g_debugging restart rc=$? else error_message "${VARDIR}/firewall is missing or is not executable" logger -p kern.err "ERROR:$g_product restart failed" rc=2 fi [ -n "$g_nolock" ] || mutex_off return $rc } # # Give Usage Information # usage() # $1 = exit status { echo "Usage: $(basename $0) [debug|trace] [nolock] [ -q ] [ -v[-1|{0-2}] ] [ -t ] " echo "where is one of:" echo " add [:] ... " echo " allow
..." echo " clear" echo " delete [:] ... " echo " disable " echo " drop
..." echo " dump [ -x ]" echo " enable " echo " forget [ ]" echo " help" if [ $g_family -eq 4 ]; then echo " ipcalc {
/ |
}" echo " ipdecimal {
| }" echo " iprange
-
" fi echo " logdrop
..." echo " logreject
..." echo " logwatch []" echo " reject
..." echo " reset [ ... ]" echo " restart [ -n ] [ -p ] [ -f ] [ ]" echo " restore [ -n ] [ ]" echo " save [ ]" echo " [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [ [ ... ]" echo " [ show | list | ls ] [ -f ] capabilities" echo " [ show | list | ls ] arptables" echo " [ show | list | ls ] classifiers" echo " [ show | list | ls ] config" echo " [ show | list | ls ] connections" echo " [ show | list | ls ] event [ ...]" echo " [ show | list | ls ] events" echo " [ show | list | ls ] filters" echo " [ show | list | ls ] ip" if [ $g_family -eq 4 ]; then echo " [ show | list | ls ] ipa" fi echo " [ show | list | ls ] [ -m ] log []" echo " [ show | list | ls ] [ -x ] mangle|nat|raw|rawpost" echo " [ show | list | ls ] nfacct" echo " [ show | list | ls ] policies" echo " [ show | list | ls ] routing" echo " [ show | list | ls ] tc [ device ]" echo " [ show | list | ls ] vardir" echo " [ show | list | ls ] zones" echo " start [ -f ] [ -p ] [ ]" echo " stop" echo " status" echo " version [ -a ]" echo exit $1 } # # This is the main entry point into the CLI. It directly handles all commands supported # by both the full and lite versions. Note, however, that functions such as start_command() # appear in both this library and it lib.cli-std. The ones in cli-std overload the ones # here if that lib is loaded below. # shorewall_cli() { g_debugging= if [ $# -gt 0 ] && [ "x$1" = "xdebug" -o "x$1" = "xtrace" ]; then g_debugging=$1 shift fi g_nolock= if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then g_nolock=nolock shift fi g_noroutes= g_purge= g_ipt_options="-nv" g_fast= g_verbose_offset=0 g_use_verbosity= g_debug= g_export= g_refreshchains=:none: g_confess= g_update= g_convert= g_annotate= g_recovering= g_timestamp= g_shorewalldir= g_haveconfig= g_conditional= g_file= g_doing="Compiling" g_directives= g_inline= VERBOSE= VERBOSITY=1 [ -n "$g_lite" ] || . ${g_basedir}/lib.cli-std finished=0 while [ $finished -eq 0 ]; do [ $# -eq 0 ] && usage 1 option=$1 case $option in -) finished=1 ;; -*) option=${option#-} while [ -n "$option" ]; do case $option in c) [ $# -eq 1 -o -n "$g_lite" ] && usage 1 if [ ! -d $2 ]; then if [ -e $2 ]; then fatal_error "$2 is not a directory" else fatal_error "Directory $2 does not exist" fi fi g_shorewalldir=$(resolve_file $2) option= shift ;; e*) [ -n "$g_lite" ] && usage 1 g_export=Yes option=${option#e} ;; x*) g_ipt_options="-xnv" option=${option#x} ;; q*) g_verbose_offset=$(($g_verbose_offset - 1 )) option=${option#q} ;; f*) g_fast=Yes option=${option#f} ;; [vV]*) case $option in v*) option=${option#v} ;; *) option=${option#V} ;; esac case $option in -1*) g_use_verbosity=-1 option=${option#-1} ;; 0*) g_use_verbosity=0 option=${option#0} ;; 1*) g_use_verbosity=1 option=${option#1} ;; 2*) g_use_verbosity=2 option=${option#2} ;; *) g_verbose_offset=$(($g_verbose_offset + 1 )) g_use_verbosity= ;; esac ;; n*) g_noroutes=Yes option=${option#n} ;; t*) g_timestamp=Yes option=${option#t} ;; -) finished=1 option= ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done if [ $# -eq 0 ]; then usage 1 fi PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin MUTEX_TIMEOUT= [ -f ${g_confdir}/vardir ] && . ${g_confdir}/vardir [ -n "${VARDIR:=/var/lib/$g_program}" ] if [ ! -f ${VARDIR}/firewall ]; then [ -f ${VARDIR}/.restore ] && cp -f ${VARDIR}/.rstore ${VARDIR}/firewall fi g_firewall=${VARDIR}/firewall version_file=${g_sharedir}/version if [ -f $version_file ]; then SHOREWALL_VERSION=$(cat $version_file) else echo " ERROR: $g_product is not properly installed" >&2 echo " The file $version_file does not exist" >&2 exit 1 fi banner="${g_product}-${SHOREWALL_VERSION} Status at $g_hostname -" case $(echo -e) in -e*) g_ring_bell="echo \a" g_echo_e="echo" ;; *) g_ring_bell="echo -e \a" g_echo_e="echo -e" ;; esac case $(echo -n "Testing") in -n*) g_echo_n= ;; *) g_echo_n=-n ;; esac COMMAND=$1 case "$COMMAND" in start) get_config Yes Yes shift start_command $@ ;; stop|clear) [ $# -ne 1 ] && usage 1 get_config [ -x $g_firewall ] || fatal_error "$g_product has never been started" [ -n "$g_nolock" ] || mutex_on run_it $g_firewall $g_debugging $COMMAND [ -n "$g_nolock" ] || mutex_off ;; reset) get_config shift [ -n "$g_nolock" ] || mutex_on [ -x $g_firewall ] || fatal_error "$g_product has never been started" run_it $g_firewall $g_debugging reset $@ [ -n "$g_nolock" ] || mutex_off ;; restart) get_config Yes Yes shift restart_command $@ ;; disable|enable) get_config Yes if product_is_started; then run_it ${VARDIR}/firewall $g_debugging $@ else fatal_error "$g_product is not running" fi ;; show|list|ls) get_config Yes No Yes shift show_command $@ ;; status) [ $# -eq 1 ] || usage 1 [ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root" get_config status_command ;; dump) get_config Yes No Yes shift dump_command $@ ;; hits) [ $g_family -eq 6 ] && usage 1 get_config Yes No Yes [ -n "$g_debugging" ] && set -x shift hits_command $@ ;; version) shift version_command $@ ;; logwatch) get_config Yes Yes Yes banner="${g_product}-$SHOREWALL_VERSION Logwatch at $g_hostname -" logwatch_command $@ ;; drop) get_config [ -n "$g_debugging" ] && set -x [ $# -eq 1 ] && usage 1 drop_command $@ ;; logdrop) get_config [ -n "$g_debugging" ] && set -x [ $# -eq 1 ] && usage 1 logdrop_command $@ ;; reject|logreject) get_config [ -n "$g_debugging" ] && set -x [ $# -eq 1 ] && usage 1 reject_command $@ ;; allow) get_config allow_command $@ ;; add) get_config shift add_command $@ ;; delete) get_config shift delete_command $@ ;; save) get_config [ -n "$g_debugging" ] && set -x save_command $@ ;; forget) get_config forget_command $@ ;; ipcalc) [ -n "$g_debugging" ] && set -x ipcalc_command $@ ;; iprange) [ -n "$g_debugging" ] && set -x iprange_command $@ ;; ipdecimal) [ -n "$g_debugging" ] && set -x ipdecimal_command $@ ;; restore) get_config shift restore_command $@ ;; call) get_config [ -n "$g_debugging" ] && set -x # # Undocumented way to call functions in the libraries directly # shift $@ ;; help) shift usage ;; iptrace) get_config shift iptrace_command $@ ;; noiptrace) get_config shift noiptrace_command $@ ;; *) if [ -z "$g_lite" ]; then compiler_command $@ else usage 1 fi ;; esac }