#!/bin/sh
RCDLINKS="2,S41 3,S41 6,K41"
#
#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V1.3 6/14/2002
#
#     This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]	      
#
#     (c) 1999,2000,2001,2002 - Tom Eastep (teastep@shorewall.net)
#
#	On most distributions, this file should be called:
#	/etc/rc.d/init.d/shorewall or /etc/init.d/shorewall
#
#	Complete documentation is available at http://shorewall.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License 
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
#	If an error occurs while starting or restarting the firewall, the
#	firewall is automatically stopped.
#
#	Commands are:
#
#	   shorewall start			  Starts the firewall 
#	   shorewall restart			  Restarts the firewall
#	   shorewall stop			  Stops the firewall
#	   shorewall status			  Displays firewall status
#	   shorewall reset			  Resets iptabless packet and
#						  byte counts
#	   shorewall clear			  Remove all Shorewall chains 
#						  and rules/policies.
#	   shorewall refresh	.		  Rebuild the common chain
#	   shorewall check			  Verify the more heavily-used
#						  configuration files.

#### BEGIN INIT INFO
# Provides:	  shorewall
# Required-Start: $network
# Required-Stop:
# Default-Start:  2 3 5
# Default-Stop:	  0 1 6
# Description:	  starts and stops the shorewall firewall
### END INIT INFO

# chkconfig: 2345 25 90
# description: Packet filtering firewall
#

###############################################################################
# Search a list looking for a match -- returns zero if a match found	      #
# 1 otherwise								      #
###############################################################################
list_search() # $1 = element to search for , $2-$n = list
{
    local e=$1

    while [ $# -gt 1 ]; do
	shift
	[ "x$e" = "x$1" ] && return 0
    done

    return 1
}

###############################################################################
# Mutual exclusion -- These functions are jackets for the mutual exclusion    #
#		      routines in /var/lib/shorewall/functions. They invoke   #
#		      the corresponding function in that file if the user did #
#		      not specify "nolock" on the runline.		      #
###############################################################################
my_mutex_on() {
    [ -n "$nolock" ] || { mutex_on; have_mutex=Yes; }
}

my_mutex_off() {
    [ -n "$have_mutex" ] && { mutex_off; have_mutex=; }
}

###############################################################################
# Message to stderr							      #
###############################################################################
error_message() # $* = Error Message
{
   echo "   $@" >&2
}

###############################################################################
# Fatal error -- stops the firewall after issuing the error message	      #
###############################################################################
fatal_error() # $* = Error Message
{
    echo "   $@" >&2
    stop_firewall
    exit 2
}

###############################################################################
# Fatal error during startup -- generate an error message and abend with      #
#				altering the state of the firewall	      #
###############################################################################
startup_error() # $* = Error Message
{
    echo "   $@" >&2
    my_mutex_off
    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
    kill $$
    exit 2
}

###############################################################################
# Send a message to STDOUT and the System Log				      #
###############################################################################
report () { # $* = message
    echo "$@"
    logger "$@"
}

###############################################################################
# Perform variable substitution on the passed argument and echo the result    #
###############################################################################
expand() # $1 = contents of variable which may be the name of another variable
{
    eval echo \"$1\"
}

###############################################################################
# Perform variable substitition on the values of the passed list of variables #
###############################################################################
expandv() # $* = list of variable names
{
    local varval

    while [ $# -gt 0 ]; do
	eval varval=\$${1}
	eval $1=\"$varval\"
	shift
    done
}

################################################################################
# Run iptables and if an error occurs, stop the firewall and quit	       #
################################################################################
run_iptables() {
    if ! iptables `echo $@ | sed 's/!/! /g'`; then
	[ -z "$stopping" ] && { stop_firewall; exit 2; }
    fi
}

################################################################################
# Run ip and if an error occurs, stop the firewall and quit		       #
################################################################################
run_ip() {
    if ! ip $@ ; then
	[ -z "$stopping" ] && { stop_firewall; exit 2; }
    fi
}

################################################################################
# Run arp and if an error occurs, stop the firewall and quit		       #
################################################################################
run_arp() {
    if ! arp $@ ; then
	[ -z "$stopping" ] && { stop_firewall; exit 2; }
    fi
}

################################################################################
# Run tc and if an error occurs, stop the firewall and quit		       #
################################################################################
run_tc() {
    if ! tc $@ ; then
	[ -z "$stopping" ] && { stop_firewall; exit 2; }
    fi
}

################################################################################
# Create a filter chain							       #
#									       #
# If the chain isn't one of the common chains then add a rule to the chain     #
# allowing packets that are part of an established connection. Create a	       #
# variable ${1}_exists and set its value to Yes to indicate that the chain now #
# exists.								       #
################################################################################
createchain() # $1 = chain name, $2 = If non-null, don't create default rules
{
    run_iptables -N $1

    if [ $# -eq 1 ]; then
	state="ESTABLISHED"
	[ -n "$ALLOWRELATED" ] && state="$state,RELATED"
	run_iptables -A $1 -m state --state $state -j ACCEPT
	[ -z "$NEWNOTSYN" ] && \
	    run_iptables -A $1 -p TCP !--syn -m state --state NEW -j badnew
    fi

    eval ${1}_exists=Yes
}

################################################################################
# Determine if a chain exists						       #
#									       #
# When we create a chain "chain", we create a variable named chain_exists and  #
# set its value to Yes. This function tests for the "_exists" variable	       #
# corresponding to the passed chain having the value of "Yes".		       #
################################################################################
havechain() # $1 = name of chain
{
    eval test \"\$${1}_exists\" = Yes
}

################################################################################
# Ensure that a chain exists (create it if it doesn't)			       #
################################################################################
ensurechain() # $1 = chain name
{
    havechain $1 || createchain $1
}

################################################################################
# Add a rule to a chain creating the chain if necessary			       #
################################################################################
addrule() # $1 = chain name, remainder of arguments specify the rule
{
    ensurechain $1
    run_iptables -A $@
}

################################################################################
# Create a nat chain							       #
#									       #
# Create a variable ${1}_nat_exists and set its value to Yes to indicate that  #
# the chain now exists.							       #
################################################################################
createnatchain() # $1 = chain name
{
    run_iptables -t nat -N $1

    eval ${1}_nat_exists=Yes
}

################################################################################
# Determine if a nat chain exists					       #
#									       #
# When we create a chain "chain", we create a variable named chain_nat_exists  #
# and set its value to Yes. This function tests for the "_exists" variable     #
# corresponding to the passed chain having the value of "Yes".		       #
################################################################################
havenatchain() # $1 = name of chain
{
    eval test \"\$${1}_nat_exists\" = Yes
}

################################################################################
# Ensure that a chain exists (create it if it doesn't)			       #
################################################################################
ensurenatchain() # $1 = chain name
{
    havenatchain $1 || createnatchain $1
}

################################################################################
# Add a rule to a nat chain creating the chain if necessary		       #
################################################################################
addnatrule() # $1 = chain name, remainder of arguments specify the rule
{
    ensurenatchain $1
    run_iptables -t nat -A $@
}

################################################################################
# Delete a chain if it exists						       #
################################################################################
deletechain() # $1 = name of chain
{
    qt iptables -L $1 -n && qt iptables -F $1 && qt iptables -X $1
}

################################################################################
# Set a standard chain's policy						       #
################################################################################
setpolicy() # $1 = name of chain, $2 = policy
{
    run_iptables -P $1 $2
}

################################################################################
# Set a standard chain to enable established connections		       #
################################################################################
setcontinue() # $1 = name of chain
{
    run_iptables -A $1 -m state --state ESTABLISHED -j ACCEPT
}

################################################################################
# Flush one of the NAT table chains					       #
################################################################################
flushnat() # $1 = name of chain
{
    run_iptables -t nat -F $1
}

################################################################################
# Find interfaces to a given zone					       #
#									       #
# Read the interfaces file and for each record matching the passed ZONE,       #
# echo the expanded contents of the "INTERFACE" column			       #
################################################################################
find_interfaces() # $1 = interface zone
{
    local zne=$1

    while read z interface subnet options; do
	[ "x`expand $z`" = "x$zne" ] && echo `expand $interface`
    done < $TMP_DIR/interfaces
}

################################################################################
# Chain name base for an interface					       #
################################################################################
chain_base() #$1 = interface
{
    local c=${1%%+*}

    echo ${c:=common}
}

################################################################################
# Forward Chain for an interface					       #
################################################################################
forward_chain() # $1 = interface
{
   echo `chain_base $1`_fwd
}

################################################################################
# Input Chain for an interface						       #
################################################################################
input_chain() # $1 = interface
{
   echo `chain_base $1`_in
}

################################################################################
# Output Chain for an interface						       #
################################################################################
output_chain() # $1 = interface
{
   echo `chain_base $1`_out
}

################################################################################
# Masquerade Chain for an interface					       #
################################################################################
masq_chain() # $1 = interface
{
   echo `chain_base $1`_masq
}

################################################################################
# DNAT Chain from a zone						       #
################################################################################
dnat_chain() # $1 = zone
{
   echo ${1}_dnat
}

################################################################################
# SNAT Chain to a zone							       #
################################################################################
snat_chain() # $1 = zone
{
   echo ${1}_snat
}

################################################################################
# First chains for an interface						       #
################################################################################
first_chains() #$1 = interface
{
   local c=`chain_base $1`

   echo ${c}_fwd ${c}_in
}

################################################################################
# Find hosts in a given zone						       #
#									       #
# Read hosts file and for each record matching the passed ZONE,		       #
# echo the expanded contents of the "HOST(S)" column			       #
################################################################################
find_hosts() # $1 = host zone
{
    local hosts

    while read z hosts options; do
	[ "x`expand $z`" = "x$1" ] && expandv hosts && echo `separate_list $hosts`
    done < $TMP_DIR/hosts
}

################################################################################
# Determine the interfaces on the firewall				       #
#									       #
# For each zone, create a variable called ${zone}_interfaces. This	       #
# variable contains a space-separated list of interfaces to the zone	       #
################################################################################
determine_interfaces() {
    for zone in $zones; do
	interfaces=`find_interfaces $zone`
	interfaces=`echo $interfaces` # Remove extra trash
	eval ${zone}_interfaces="\$interfaces"
    done
}
    
################################################################################
# Determine the defined hosts in each zone and generate report		       #
################################################################################
determine_hosts() {
    do_a_zone()
    {
	eval interfaces=\$${zone}_interfaces

	for interface in $interfaces; do
	    if [ -z "$hosts" ]; then
		hosts=$interface:0.0.0.0/0
	    else
		hosts="$hosts $interface:0.0.0.0/0"
	    fi
	done
    }

    recalculate_interfaces()
    {
	interfaces=
	
	for host in $hosts; do
	    interface=${host%:*}
	    if ! list_search $interface $interfaces; then
		if [ -z "$interfaces" ]; then
		    interfaces=$interface
		else
		    interfaces="$interfaces $interface"
		fi
	    fi
	done

	eval ${zone}_interfaces="\$interfaces"
    }

    for zone in $zones; do
	hosts=`find_hosts $zone`
	hosts=`echo $hosts` # Remove extra trash

	if [ -n "MERGE_HOSTS" ]; then
	    ####################################################################
	    # Zone will be the union of its host and interface definitions
	    #
	    do_a_zone
	    recalculate_interfaces
	elif [ -n "$hosts" ]; then
	    ####################################################################
	    # Zone is defined in terms of hosts -- derive the interface list
	    # from the host list
	    #
	    recalculate_interfacess
	else
	    ####################################################################
	    # If no hosts are defined for a zone then the zone consists of any
	    # host that can send us messages via the interfaces to the zone
	    #
	    do_a_zone
	fi

	eval ${zone}_hosts="\$hosts"

	if [ -n "$hosts" ]; then
	    eval display=\$${zone}_display
	    display_list "$display Zone:" $hosts
	else
	    error_message "Warning: Zone $zone is empty"
	fi 
    done
}

################################################################################
# Ensure that the passed zone is defined in the zones file or is the firewall  #
################################################################################
validate_zone() # $1 = zone
{
    list_search $1 $zones $FW
}

################################################################################
# Validate the zone names and options in the interfaces file		       #
################################################################################
validate_interfaces_file() {
    while read z interface subnet options; do
	expandv z interface subnet options
	r="$z $interface $subnet $options"
	[ "x$z" = "x-" ] || validate_zone $z || startup_error "Invalid zone ($z) in record \"$r\""

	list_search $interface $all_interfaces && \
	    startup_error "Error: Duplicate Interface $interface"
	
	all_interfaces="$all_interfaces $interface"

	for option in `separate_list $options`; do
	    case $option in
	    dhcp|noping|filterping|routestopped|norfc1918|multi)
                ;;
	    routefilter|dropunclean|logunclean|blacklist|proxyarp|-)
		;;
	    *)
		error_message "Warning: Invalid option ($option) in record \"$r\""
		;;
	    esac
	done
	
    [ -z "$all_interfaces" ] && startup_error "Error: No Interfaces Defined"

    done < $TMP_DIR/interfaces
}

################################################################################
# Validate the zone names and options in the hosts file			       #
################################################################################
validate_hosts_file() {
    while read z hosts options; do
	expandv z hosts options
	r="$z $hosts $options"
	validate_zone $z || startup_error "Invalid zone ($z) in record \"$r\""

	for host in `separate_list $hosts`; do
	    interface=${host%:*}

	    list_search  $interface $all_interfaces || \
		startup_error "Unknown interface ($interface) in record \"$r\""

	    for option in `separate_list $options`; do
		case $option in
		    routestopped|-)
			;;
		    *)
			error_message "Warning: Invalid option ($option) in record \"$r\""
			;;
		esac
	    done
	done
    done < $TMP_DIR/hosts
}

################################################################################
# Format a match by the passed MAC address				       #
# The passed address begins with "~" and uses "-" as a separator between bytes #
# Example: ~01-02-03-04-05-06						       #
################################################################################
mac_match() # $1 = MAC address formated as described above
{
    echo "--match mac --mac-source `echo $1 | sed 's/~//;s/-/:/g'`"
} 

################################################################################
# validate a record from the rules file					       #
#									       #
# The caller has loaded the column contents from the record into the following #
# variables:								       #
#									       #
#   target clients servers protocol ports cports address		       #
#									       #
# and has loaded a space-separated list of their values in "rule".	       #
################################################################################
validate_rule() {
    ############################################################################
    # Ensure that the passed comma-separated list has 15 or fewer elements
    #
    validate_list() {
	local temp=`separate_list $1`
	
	[ `echo $temp | wc -w` -le 15 ]
    }

    ############################################################################
    # validate one rule
    #
    validate_a_rule() {
	########################################################################
	# Determine the format of the client
	#
	cli=

	[ -n "$client" ] && case "$client" in
	    -)
		;;
	    ~*)
		cli=`mac_match $client`
		;;
	    [0-9]*|![0-9]*)
		#
		# IP Address, address or subnet
		#
		cli="-s $client"
		;;
	    *)
		#
		# Assume that this is a device name
		#
		cli="-i $client"
		;;
	    esac

	dest_interface=

	[ -n "$server" ] && case "$server" in
	    -)
		serv=
		;;
	    [0-9]*|![0-9]*)
		serv=$server
		;;
	    ~*)
		fatal_error "Error: Rule \"$rule\" - Server may not be specified by MAC Address"
		;;
	    *)
		dest_interface="-o $server"
		serv=
		;;
	esac
	################################################################
	# Setup PROTOCOL, PORT and STATE variables
	#
	sports=""
	dports=""
	state="-m state --state NEW"
	proto=$protocol
	addr=$address
	servport=$serverport

	case $proto in
	    tcp|udp|TCP|UDP|6|17)
		[ -n "$port" ] && [ "x${port}" != "x-" ] && \
		    dports="--dport $port"
		[ -n "$cport" ] && [ "x${cport}" != "x-" ] && \
		    sports="--sport $cport"
		;;
	    icmp|ICMP|0)
		[ -n "$port" ] && dports="--icmp-type $port"
		state=""
		;;
	    related|RELATED)
		proto=
		state="-m state --state RELATED"
		;;
	    *)
		[ -n "$port" ] && [ "x${port}" != "x-" ] && \
		    startup_error "Port number not allowed with protocol " \
				  "\"$proto\"; rule: \"$rule\""
		;;
	esac

	proto="${proto:+-p $proto}"

	case "$logtarget" in
	REJECT)
	    target=reject
	    [ -n "$servport" ] && \
		startup_error "Error: server port may not be specified in a REJECT rule;"\
                              "rule: \"$rule\""
	    ;;
	ACCEPT)
	    [ -n "$servport" ] && \
		startup_error "Error: server port may not be specified in an ACCEPT rule;"\
                              "rule: \"$rule\""
	    ;;
	REDIRECT)
	    [ -n "$serv" ] && startup_error "Error: REDIRECT rules cannot"\
		" specify a server IP; rule: \"$rule\""
	    servport=${servport:=$port}
	    ;;
	DNAT)
	    [ -n "$serv" ] || startup_error "Error: DNAT rules require a" \
		" server address; rule: \"$rule\""
	    ;;
	esac

	if [ -z "$proto" -a -z "$cli" -a -z "$serv" -a -z "$servport" ]; then
	    error_message "Warning -- Rule \"$rule\" is a POLICY"
	    error_message "	   -- and should be moved to the policy file"
	fi

	if [ -n "${serv}${servport}" ]; then
	    ##################################################################
	    # Destination is a Specific Server or we're redirecting a port
	    #
	    if [ -n "$addr" -a "$addr" != "$serv" ]; then
		##############################################################
		# Must use Prerouting DNAT
		#
		if [ -z "$NAT_ENABLED" ]; then
		    startup_error \
		    "Error - Rule \"$rule\" requires NAT which is disabled"
		fi

		if [ "$target" != "ACCEPT" ]; then
		    startup_error "Error - Only ACCEPT rules may specify " \
			"port mapping; rule \"$rule\""
		fi
	    fi
	else
	    [ -n "$addr" ] && startup_error \
		  "Error: An ADDRESS ($addr) is only allowed in" \
		  " a DNAT or REDIRECT rule: \"$rule\""
	fi
    }
    ############################################################################
    # V a l i d a t e  _ R u l e    S t a r t s	   H e r e
    ############################################################################
    # Parse the Target and Clients columns
    #
    if [ "$target" = "${target%:*}" ]; then
	loglevel=
    else
	loglevel="${target#*:}"
	target="${target%:*}"
	expandv loglevel
    fi

    logtarget="$target"
    #
    # DNAT and REDIRECT targets were implemented in version 1.3 to replace
    # an older syntax. We simply map the new syntax into the old and proceed;
    # that way, people who have files with the old syntax don't need to
    # convert right away.
    #
    case $target in
    DNAT)
	target=ACCEPT
	address=${address:=detect}
	;;
    REDIRECT)
	target=ACCEPT
	address=${address:=all}
	if [ "x-" = "x$servers" ]; then
	    servers=$FW
	else
	    servers="fw::$servers"
	fi
	;;
    ACCEPT|DROP|REJECT)
	;;
    *)
	startup_error "Error: Invalid target;" \
		      " rule: \"$rule\""

    esac

    if [ "$clients" = "${clients%:*}" ]; then
	clientzone="$clients"
	clients=
    else
	clientzone="${clients%:*}"
	clients="${clients#*:}"
	[ -z "$clientzone" -o -z "$clients" ] && \
	   startup_error "Error: Empty source zone or qualifier: rule \"$rule\""
    fi
    
    if [ "$clientzone" = "${clientzone%\!*}" ]; then
	excludezones=
    else
	excludezones="${clientzone#*\!}"
	clientzone="${clientzone%\!*}"

	[ "$logtarget" = DNAT ] || [ "$logtarget" = REDIRECT ] ||\
	    startup_error "Error: Exclude list only allowed with DNAT or REDIRECT"
    fi
    ############################################################################
    # Validate the Source Zone

    if ! validate_zone $clientzone; then
	startup_error "Error: Undefined Client Zone in rule \"$rule\""
    fi

    source=$clientzone

    [ $source = $FW ] && source_hosts= || eval source_hosts=\"\$${source}_hosts\"

    ############################################################################
    # Parse the servers column
    #
    if [ "$servers" = "${servers%:*}" ] ; then
	serverzone="$servers"
	servers=
	serverport=
    else
	serverzone="${servers%%:*}"
	servers="${servers#*:}"
	if [ "$servers" != "${servers%:*}" ] ; then
	    serverport="${servers#*:}"
	    servers="${servers%:*}"
	    [ -z "$serverzone" -o -z "$serverport" ] && \
	        startup_error "Error: Empty destination zone or server port: rule \"$rule\""
	else
	    serverport=
	    [ -z "$serverzone" -o -z "$servers" ] && \
	        startup_error "Error: Empty destination zone or qualifier: rule \"$rule\""
	fi
    fi
    ############################################################################
    # Validate the destination zone
    #
    if ! validate_zone $serverzone; then
	startup_error "Error: Undefined Server Zone in rule \"$rule\""
    fi

    dest=$serverzone
    ############################################################################
    # Check length of port lists if MULTIPORT set
    #
    if [ -n "$MULTIPORT" ]; then
	validate_list $ports ||
	   error_message "Warning: Too many destination ports: Rule \"$rule\""
	validate_list $cports ||
	   error_message "Warning: Too many source ports: Rule \"$rule\""
    fi

    ############################################################################
    # Iterate through the various lists validating individual rules
    #
    for client in `separate_list ${clients:=-}`; do
	for server in `separate_list ${servers:=-}`; do
	    for port in `separate_list ${ports:=-}`; do
		for cport in `separate_list ${cports:=-}`; do
		    validate_a_rule
		done
	    done
	done
    done

    echo "   Rule \"$rule\" validated."
}

################################################################################
# validate the rules file						       #
################################################################################
validate_rules() # $1 = name of rules file
{
    strip_file rules

    while read target clients servers protocol ports cports address; do
	expandv clients servers protocol ports cports address
	case "$target" in

	ACCEPT*|DROP*|REJECT*|DNAT*|REDIRECT*)
	    rule="`echo $target $clients $servers $protocol $ports $cports $address`"
	    validate_rule
	    ;;
	*)
	    rule="`echo $target $clients $servers $protocol $ports $cports $address`"
	    startup_error "Error: Invalid Target - rule \"$rule\" ignored"
	    ;;
	esac
    done < $TMP_DIR/rules
}

################################################################################
# validate the policy file						       #
################################################################################
validate_policy()
{
    strip_file policy $policy

    while read client server policy loglevel synparams; do
	expandv client server policy loglevel synparams
	case "$client" in
	all|ALL)
	    ;;
	*)
	    if ! validate_zone $client; then
		startup_error "Error: Undefined zone $client"
	    fi
	esac

	case "$server" in
	all|ALL)
	    ;;
	*)
	    if ! validate_zone $server; then
		startup_error "Error: Undefined zone $server"
	    fi
	esac

	case $policy in
	ACCEPT|REJECT|DROP|CONTINUE)
	    ;;
	*)
	    startup_error "Error: Invalid policy $policy"
	    ;;
	esac

    done < $TMP_DIR/policy
}

################################################################################
# Find broadcast addresses						       #
################################################################################
find_broadcasts() {
    while read z interface bcast options; do
	expandv interface bcast
	if [ "x$bcast" = "xdetect" ]; then
	    addr="`ip addr show $interface 2> /dev/null`"
	    if [ -n "`echo "$addr" | grep 'inet.*brd '`" ]; then
		addr="`echo "$addr" | \
		grep "inet " | sed 's/^.* inet.*brd //;s/scope.*//'`"
		echo $addr | cut -d' ' -f 1
	    fi
	elif [ "x${bcast}" != "x-" ]; then
	    echo `separate_list $bcast`
	fi
    done < $TMP_DIR/interfaces
}

################################################################################
# Find interface address--returns the first IP address assigned to the passed  #
# device								       #
################################################################################
find_interface_address() # $1 = interface
{
    # 
    # get the line of output containing the first IP address
    #
    addr=`ip addr show $1 2> /dev/null | grep inet | head -n1`
    #
    # If there wasn't one, bail out now
    #
    [ -n "$addr" ] || fatal_error "Can't determine the IP address of $1"
    #
    # Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
    # along with everything else on the line
    #
    echo $addr | sed 's/inet //;s/\/.*//;s/ peer.*//'
}

################################################################################
# Find interfaces that have the passed option specified			       #
################################################################################
find_interfaces_by_option() # $1 = option
{
    while read ignore interface subnet options; do
	expandv options
	list_search $1 `separate_list $options` && \
	    echo `expand $interface`
    done < $TMP_DIR/interfaces
}

################################################################################
# Find hosts with the passed option					       #
################################################################################
find_hosts_by_option() # $1 = option
{
    while read ignore hosts options; do
	expandv options
	list_search $1 `separate_list $options` && \
	    echo `expand $hosts`
    done < $TMP_DIR/hosts

    while read ignore interface ignore1 options; do
	expandv options
	list_search $1 `separate_list $options` && \
	    echo `expand $interface`:0.0.0.0/0
    done < $TMP_DIR/interfaces
}

################################################################################
# Determine if there are interfaces of the given zone and option	       #
#									       #
# Returns zero if any such interfaces are found and returns one otherwise.     #
################################################################################
have_interfaces_in_zone_with_option() # $1 = zone, $2 = option
{
    local zne=$1

    while read z interface broadcast options; do
	[ "x`expand $z`" = "x$zne" ] && expandv options && \
	    list_search $1 `separate_list $options` && \
	    return 0
    done < $TMP_DIR/interfaces
    return 1
}

################################################################################
# Flush and delete all user-defined chains in the filter table		       #
################################################################################
deleteallchains() {
    run_iptables -F
    run_iptables -X
}

################################################################################
# Source a user exit file if it exists					       #
################################################################################
run_user_exit() # $1 = file name
{
    local user_exit=`find_file $1`

    if [ -f $user_exit ]; then
	echo "Processing $user_exit ..."
	. $user_exit
    fi
}

################################################################################
# Stop the Firewall -							       #
################################################################################
stop_firewall() {
    stopping="Yes"

    deletechain shorewall

    run_user_exit stop

    [ -n "$MANGLE_ENABLED" ] && \
	run_iptables -t mangle -F && \
	run_iptables -t mangle -X

    [ -n "$NAT_ENABLED" ] && delete_nat
    delete_proxy_arp
    [ -n "$TC_ENABLED" ] && delete_tc

    setpolicy INPUT DROP
    setpolicy OUTPUT DROP
    setpolicy FORWARD DROP

    deleteallchains

    hosts="`find_hosts_by_option routestopped`"

    strip_file routestopped 

    while read interface host; do
	expandv interface host
	[ "x$host" = "x-" ] && host=
	hosts="$hosts $interface:${host:-0.0.0.0/0}"
    done < $TMP_DIR/routestopped

    for host in $hosts; do
	interface=${host%:*}
	subnet=${host#*:}
	iptables -A INPUT  -i $interface -s $subnet -j ACCEPT
	iptables -A OUTPUT -o $interface -d $subnet -j ACCEPT

	for host1 in $hosts; do
	    [ "$host" != "$host1" ] && \
		iptables -A FORWARD -i $interface -s $subnet \
		    -o ${host1%:*} -d ${host1#*:} -j ACCEPT
	done
    done

    iptables -A INPUT  -i lo -j ACCEPT
    iptables -A OUTPUT -o lo -j ACCEPT


    for interface in `find_interfaces_by_option dhcp`; do
	iptables -A INPUT  -p udp -i $interface --dport 67:68 -j ACCEPT
	iptables -A OUTPUT -p udp -o $interface --dport 67:68 -j ACCEPT
    done

    case "$IP_FORWARDING" in
    [Oo][Nn])
	echo 1 > /proc/sys/net/ipv4/ip_forward
	;;
    [Oo][Ff][Ff])
	echo 0 > /proc/sys/net/ipv4/ip_forward
	;;
    esac

    run_user_exit stopped

    logger "Shorewall Stopped"

    rm -rf $TMP_DIR

    case $command in
    stop|clear)
	;;
    *)
	#
	# The firewall is being stopped when we were trying to do something
	# else. Remove the lock file and Kill the shell in case we're in a
	# subshell
	#
	my_mutex_off
	kill $$
	;;
    esac
}

################################################################################
# Remove all rules and remove all user-defined chains			       #
################################################################################
clear_firewall() {
    stop_firewall

    run_iptables -F

    echo 1 > /proc/sys/net/ipv4/ip_forward
    
    setpolicy INPUT ACCEPT
    setpolicy FORWARD ACCEPT
    setpolicy OUTPUT ACCEPT

    run_user_exit clear

    logger "Shorewall Cleared"
}

################################################################################
# Set up ipsec tunnels							       #
################################################################################
setup_tunnels() # $1 = name of tunnels file
{
    local inchain
    local outchain

    setup_one_ipsec() # $1 = gateway $2 = gateway zone
    {
	options="-m state --state NEW -j ACCEPT"
	addrule $inchain	  -p 50	 -s $1 $options
	addrule $outchain	  -p 50	 -d $1 $options
	run_iptables -A $inchain  -p 51	 -s $1 $options
	run_iptables -A $outchain -p 51	 -d $1 $options
	run_iptables -A $inchain  -p udp -s $1 --sport 500 --dport 500 $options
	run_iptables -A $outchain -p udp -d $1 --dport 500 --sport 500 $options

	if [ -n "$2" ]; then
	    if validate_zone $2; then
		addrule ${FW}2${2} -p udp --sport 500 --dport 500 $options
	    else
		error_message "Warning: Invalid gateway zone ($2)" \
		" -- Tunnel \"$tunnel\" may encounter keying problems"
	    fi
	fi

	echo "   IPSEC tunnel to $gateway defined."
    }

    setup_one_other() # $1 = TYPE, $2 = gateway, $3 = protocol
    {
	options="-m state --state NEW -j ACCEPT"
	addrule $inchain  -p $3 -s $2 $options
	addrule $outchain -p $3 -d $2 $options

	echo "   $1 tunnel to $gateway defined."
    }

    strip_file tunnels $1

    while read kind z gateway z1; do
	expandv kind z gateway z1
	tunnel="`echo $kind $z $gateway $z1`"
	if validate_zone $z; then
	    inchain=${z}2${FW}
	    outchain=${FW}2${z}
	    case $kind in
		ipsec|IPSEC)
		    setup_one_ipsec $gateway $z1
		    ;;
		ipip|IPIP)
		    setup_one_other IPIP $gateway 4
		    ;;
		gre|GRE)
		    setup_one_other GRE $gateway 47 
		    ;;
		*)
		    error_message "Tunnels of type $kind are not supported:" \
			"Tunnel \"$tunnel\" Ignored"
		    ;;
	    esac
	else
	    error_message "Invalid gateway zone ($z)" \
		" -- Tunnel \"$tunnel\" Ignored"
	fi	    
    done < $TMP_DIR/tunnels
}

################################################################################
# Setup Proxy ARP							       #
################################################################################
setup_proxy_arp() {

    print_error() {
	error_message "Invalid value for HAVEROUTE - ($haveroute)"
	error_message "Entry \"$address $interface $external $haveroute\" ignored"
    }

    setup_one_proxy_arp() {
	case $haveroute in
	[Nn][Oo])
	    haveroute=
	    ;;
	[Yy][Ee][Ss])
	    ;;
	*)
	    if [ -n "$haveroute" ]; then
		print_error
		return
	    fi
	    ;;
	esac

	[ -z "$haveroute" ] && run_ip route add $address dev $interface

	run_arp -Ds $address $external pub

	echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp
	echo 0 > /proc/sys/net/ipv4/conf/$external/proxy_arp

	echo $address $interface $external $haveroute >> ${STATEDIR}/proxyarp

	echo "   Host $address connected to $interface added to ARP on $external"
    }

    > ${STATEDIR}/proxyarp

    strip_file proxyarp

    while read address interface external haveroute; do
	expandv address interface external haveroute
	setup_one_proxy_arp
    done < $TMP_DIR/proxyarp

    interfaces=`find_interfaces_by_option proxyarp`

    for interface in $interfaces; do
	if echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp 2> /dev/null; then
	    echo "   Enabled proxy ARP on $interface"
        else
	    error_message "Warning: Unable to enable proxy ARP on $interface"
        fi
    done
}

###############################################################################
# Set up SYN flood protection						      #
###############################################################################
setup_syn_flood_chain ()
	# $1 = policy chain
	# $2 = synparams
{
    local chain=$1
    local limit=${2%:*}
    local limit_burst=${2#*:}

    run_iptables -N @$chain
    run_iptables -A @$chain \
	-m limit --limit $limit --limit-burst $limit_burst \
	-j RETURN
    run_iptables -A @$chain -j DROP
}

################################################################################
# Enable SYN flood protection on a chain				       #
# -----------------------------------------------------------------------------#
# Insert a jump rule to the protection chain from the first chain. Inserted    #
# as the second rule and restrict the jump to SYN packets		       #
################################################################################
enable_syn_flood_protection() # $1 = chain, $2 = protection chain
{
    run_iptables -I $1 2 -p tcp --syn -j @$2
    echo "      Enabled SYN flood protection"
}

################################################################################
# Delete existing Proxy ARP						       #
################################################################################
delete_proxy_arp() {
    if [ -f ${STATEDIR}/proxyarp ]; then
	while read address interface external haveroute; do
	    qt arp -i $external -d $address pub
	    [ -z "$haveroute" ] && qt ip route del $address dev $interface
	done < ${STATEDIR}/proxyarp

	rm -f ${STATEDIR}/proxyarp
    fi

    [ -d ${STATEDIR} ] && touch ${STATEDIR}/proxyarp

    for f in `ls /proc/sys/net/ipv4/conf/*/proxy_arp`; do
	echo 0 > $f
    done
}

################################################################################
# Setup Static Network Address Translation (NAT)			       #
################################################################################
setup_nat() {
    local allints
    #
    # At this point, we're just interested in the network translation
    #
    > ${STATEDIR}/nat

    strip_file nat

    echo "Setting up NAT..."

    while read external interface internal allints localnat; do
	expandv external interface internal allints localnat
	if [ -n "$ADD_IP_ALIASES" ]; then
	    qt ip addr del $external dev $interface
	fi

	if [ -z "$allints" -o "$allints" = "Yes" \
	    -o "$allints" = "yes" ]
	then
	    addnatrule nat_in  -d $external -j DNAT --to-destination $internal
	    addnatrule nat_out -s $internal -j SNAT --to-source $external
	    
	    if [ "$localnat" = "Yes" -o "$localnat" = "yes" ]; then
		run_iptables -t nat -A OUTPUT -d $external \
		    -j DNAT --to-destination $internal
	    fi
	else
	    addnatrule `input_chain $interface` \
		-d $external -j DNAT --to-destination $internal
	    addnatrule `output_chain $interface` \
		-s $internal -j SNAT --to-source $external
	fi

	if [ -n "$ADD_IP_ALIASES" ]; then
	    list_search $external $aliases_to_add || \
		aliases_to_add="$aliases_to_add $external $interface"
	fi

	echo "   Host $internal NAT $external on $interface"
    done < $TMP_DIR/nat
}

################################################################################
# Delete existing Static NAT						       #
################################################################################
delete_nat() {
    run_iptables -t nat -F
    run_iptables -t nat -X

    if [ -f ${STATEDIR}/nat ]; then
	while read external interface; do
	    qt ip addr del $external dev $interface
	done < ${STATEDIR}/nat

	rm -f {$STATEDIR}/nat
    fi

    [ -d ${STATEDIR} ] && touch ${STATEDIR}/nat
}

################################################################################
# Process TC Rule							       #
################################################################################
process_tc_rule()
{
    add_a_tc_rule() {
	r=
	chain=tcpre

	if [ "x$source" != "x-"	 ]; then
	    case $source in
	    [0-9]*)
		r="-s $source "
		;;
	    ~*)
		r=`mac_match $source`
		;;
	    $FW)
		chain=tcout
		;;
	    *)
		r="-i $source "
		;;
	    esac
	fi
	[ "x$dest"   = "x-"  ] || r="${r}-d $dest "
	[ "$proto"   = "all" ] || r="${r}-p $proto "
	[ "x$port"   = "x-"  ] || r="${r}--dport $port "
	[ "x$sport"  = "x-"  ] || r="${r}--sport $sport "

	run_iptables -t mangle -A $chain $r -j MARK --set-mark $mark

    }

    for source in `separate_list ${sources:=-}`; do
	for dest in `separate_list ${dests:=-}`; do
	    for port in `separate_list ${ports:=-}`; do
		for sport in `separate_list ${sports:=-}`; do
		    add_a_tc_rule
		done
	    done
	done
    done

    echo "   TC Rule \"$rule\" added"
}

################################################################################
# Setup queuing and classes						       #
################################################################################
setup_tc() {

    echo "Setting up Traffic Control Rules..."

    #
    # Create the TC mangle chains
    #
    run_iptables -t mangle -N tcpre
    run_iptables -t mangle -N tcout
    #
    # Process the TC Rules File
    #
    strip_file tcrules

    while read mark sources dests proto ports sports; do
	expandv mark sources dests proto ports sports
	rule=`echo "$mark $sources $dests $proto $ports $sports"`
	process_tc_rule
    done < $TMP_DIR/tcrules
    #
    # Link to the TC mangle chains from the main chains
    #
    run_iptables -t mangle -A PREROUTING  -j tcpre
    run_iptables -t mangle -A OUTPUT	  -j tcout

    run_user_exit tcstart

}

################################################################################
# Clear Traffic Shaping							       #
################################################################################
delete_tc()
{
    clear_one_tc() {
	tc qdisc del dev $1 root    2> /dev/null
	tc qdisc del dev $1 ingress 2> /dev/null
    }

    run_user_exit tcclear

    run_ip link list | \
    while read inx interface details; do
	case $inx in
	[0-9]*)
	    clear_one_tc ${interface%:}
	    ;;
	*)
	    ;;
	esac
    done
}

################################################################################
# Add a NAT rule - Helper function for the rules file processor		       #
#------------------------------------------------------------------------------#
# The caller has established the following variables:			       #
#    cli	    = Source IP, interface or MAC Specification		       #
#    serv	    = Destination IP Specification			       #
#    servport	    = Port the server is listening on			       #
#    dest_interface = Destination Interface Specification		       #
#    proto	    = Protocol Specification				       #
#    addr	    = Original Destination Address			       #
#    dports	    = Destination Port Specification. 'dports' may be changed  #
#		      by this function					       #
#    cport	    = Source Port Specification				       #
#    multiport	    = String to invoke multiport match if appropriate	       #  
################################################################################
add_nat_rule() {
    local chain

    # Be sure NAT is enabled

    if [ -z "$NAT_ENABLED" ]; then
	fatal_error \
	    "Error - Rule \"$rule\" requires NAT which is disabled"
    fi

    # Onle ACCEPT (plus DNAT and REDIRECT) may result in NAT

    if [ "$target" != "ACCEPT" ]; then
	fatal_error "Error - Only DNAT and REDIRECT rules may specify " \
	    "port mapping; rule \"$rule\""
    fi

    # Parse SNAT address if any

    if [ "$addr" != "${addr%:*}" ]; then
	snat="${addr#*:}"
	addr="${addr%:*}"
    else
	snat=""
    fi

    # Set original destination address

    case $addr in
	all)
	    addr=
	    ;;
	detect)
	   addr=
           if [ -n "$DETECT_DNAT_IPADDRS" -a "$source" != "$FW" ]; then
	       eval interfaces=\$${source}_interfaces
	       for interface in $interfaces; do
		   addr="`find_interface_address $interface` $addr"
	       done
	   fi
	   ;;
    esac

    addr=${addr:-0.0.0.0/0}

    # Select target

    if [ -n "$serv" ]; then
	servport="${servport:+:$servport}"
	target1="DNAT --to-destination ${serv}${servport}"
    else
	target1="REDIRECT --to-port $servport"
    fi

    # Generate nat table rules

    if [ "$source" = "$FW" ]; then
	run_iptables -t nat -A OUTPUT $proto $sports -d addr
	    $multiport $dports -j $target1
    else
	chain=`dnat_chain $source`
	    
	if [ -n "$excludezones" ]; then
	    chain=nonat${nonat_seq}
	    nonat_seq=$(($nonat_seq + 1))
	    createnatchain $chain
	    addnatrule `dnat_chain $source` -j $chain
	    for z in $excludezones; do
		eval hosts=\$${z}_hosts
		for host in $hosts; do
		    for adr in $addr; do
			addnatrule $chain $proto -s ${host#*:} \
			    $multiport $sports -d $adr $dports -j RETURN
		    done
		done
	    done
	fi
	
	for adr in $addr; do
	    addnatrule $chain $proto $cli $sports \
		-d $adr $multiport $dports -j $target1
	done
    fi

    # Replace destination port by the new destination port

    [ -n "$servport" ] && dports="--dport ${servport#*:}"

    # Handle SNAT

    if [ -n "$snat" ]; then
	if [ -n "$cli" ]; then
	    addnatrule `snat_chain $dest` $proto $cli $multiport \
		$sports -d $serv $dports -j SNAT --to-source $snat
	else
	    for source_host in $source_hosts; do
		[ "x${source_host#*:}" = "x0.0.0.0/0" ] && \
		    error_message "Warning: SNAT will occur on all connections to this server and port - rule \"$rule\""
		
		addnatrule `snat_chain $dest` \
		    -s ${source_host#*:} $proto $sports $multiport \
		    -d $serv $dports -j SNAT --to-source $snat
	    done
	fi
    fi
}

################################################################################
# Add one Filter Rule -- Helper function for the rules file processor	       #
#------------------------------------------------------------------------------#
# The caller has established the following variables:			       #
#    client	 = SOURCE IP or MAC					       #
#    server	 = DESTINATION IP or interface				       #
#    protocol	 = Protocol						       #
#    address	 = Original Destination Address				       #
#    port	 = Destination Port					       #
#    cport	 = Source Port						       #
#    multioption = String to invoke multiport match if appropriate	       #
#    servport	 = Port the server listens on				       #
#    chain	 = The canonical chain for this rule			       #
################################################################################
add_a_rule()
{
    # Set source variables

    cli=

    [ -n "$client" ] && case "$client" in
    -)
	;;
    [0-9]*|![0-9]*)
	cli="-s $client"
	;;
    ~*)
	cli=`mac_match $client`
	;;
    *)
	cli="-i $client"
	;;
    esac

    # Set destination variables

    dest_interface=

    [ -n "$server" ] && case "$server" in
    -)
	serv=
	;;
    [0-9]*|![0-9]*)
	serv=$server
	;;
    *)
	dest_interface="-o $server"
	serv=
	;;
    esac

    # Setup protocol and port variables

    sports=
    dports=
    state="-m state --state NEW"
    proto=$protocol
    addr=$address
    servport=$serverport
    multiport=

    case $proto in
	tcp|udp|TCP|UDP|6|17)
	    if [ -n "$port" -a "x${port}" != "x-" ]; then
		[ -n "$multioption" ] && \
		    [ "$port" != "${port%,*}" ] && \
		    multiport="$multioption"
		dports="--dport $port"
	    fi

	    if [ -n "$cport" -a "x${cport}" != "x-" ]; then
		[ -n "$multioption" ] && \
		    [ -z "$multiport" ] && \
		    [ "$cport" != "${cport%,*}" ] && \
		    multiport="$multioption"
		sports="--sport $cport"
	    fi
		;;
	icmp|ICMP|1)
	    [ -n "$port" ] && [ "x${port}" != "x-" ] && \
		dports="--icmp-type $port"
	    state=
	    ;;
	all|ALL)
	    [ -n "$port" ] && [ "x${port}" != "x-" ] && \
		fatal_error "Port number not allowed with \"all\";" \
				" rule: \"$rule\""
	    proto=
	    ;;
	related|RELATED)
	    proto=
	    state="-m state --state RELATED"
	    ;;
	*)
	    [ -n "$port" ] && [ "x${port}" != "x-" ] && \
		fatal_error "Port number not allowed with protocol " \
		"\"$proto\"; rule: \"$rule\""
	    ;;
    esac

    proto="${proto:+-p $proto}"

    # Some misc. setup
    
    case "$logtarget" in
	REJECT)
	    target=reject
	    [ -n "$servport" ] && \
		fatal_error "Error: server port may not be specified in a REJECT rule;"\
                            "rule: \"$rule\""
	    ;;
	REDIRECT)
	    [ -n "$serv" ] && startup_error "Error: REDIRECT rules cannot"\
		" specify a server IP; rule: \"$rule\""
	    servport=${servport:=$port}
	    ;;
	DNAT)
	    [ -n "$serv" ] || fatal_error "Error: DNAT rules require a" \
		" server address; rule: \"$rule\""
	    ;;
    esac

    # Complain if the rule is really a policy
    
    if [ -z "$proto" -a -z "$cli" -a -z "$serv" -a -z "$servport" ]; then
	error_message "Warning -- Rule \"$rule\" is a POLICY"
	error_message "	       -- and should be moved to the policy file"
    fi

    if [ -n "${serv}${servport}" ]; then

	# A specific server or server port given

	[ -n "$addr" -a "$addr" != "$serv" ] && add_nat_rule

	serv="${serv:+-d $serv}"

	[ -n "$loglevel" ] && run_iptables -A $chain $proto $multiport \
	    $state $cli $sports $serv $dports -j LOG $LOGPARMS \
	    --log-prefix "Shorewall:$chain:$logtarget:" \
	    --log-level $loglevel
	run_iptables -A $chain $proto $multiport $state $cli $sports \
	    $serv $dports -j $target
    else

	# Destination is a simple zone

	[ -n "$addr" ] && fatal_error \
	    "Error: An ADDRESS ($addr) is only allowed in" \
	    " a DNAT or REDIRECT: \"$rule\""

	[ -n "$loglevel" ] && run_iptables -A $chain $proto $multiport \
	    $dest_interface $state $cli $sports $dports -j LOG \
	    $LOGPARMS --log-prefix "Shorewall:$chain:$logtarget:" \
	    --log-level $loglevel
	
	run_iptables -A $chain $proto $multiport $dest_interface $state \
	    $cli $sports $dports -j $target
    fi
}

################################################################################
# Process a record from the rules file					       #
#									       #
# The caller has loaded the column contents from the record into the following #
# variables:								       #
#									       #
#   target clients servers protocol ports cports address		       #
#									       #
# and has loaded a space-separated list of their values in "rule".	       #
#									       #
# The 'multioption' variable has also been loaded appropriately to reflect     #
# the setting of the MULTIPORT option in /etc/shorewall/shorewall.conf	       #
################################################################################
process_rule() {

    # Function to count list elements

    list_count() {
	local temp=`separate_list $1`
	
	echo $temp | wc -w
    }

    # Function Body -- isolate log level
 
   if [ "$target" = "${target%:*}" ]; then
	loglevel=
    else
	loglevel="${target#*:}"
	target="${target%:*}"
	expandv loglevel
    fi

    logtarget="$target"

    # Convert 1.3 Rule formats to 1.2 format

    case $target in
    DNAT)
	target=ACCEPT
	address=${address:=detect}
	;;
    REDIRECT)
	target=ACCEPT
	address=${address:=all}
	if [ "x-" = "x$servers" ]; then
	    servers=$FW
	else
	    servers="$FW::$servers"
	fi
	;;
    esac

    # Parse and validate source

    if [ "$clients" = "${clients%:*}" ]; then
	clientzone="$clients"
	clients=
    else
	clientzone="${clients%:*}"
	clients="${clients#*:}"
	[ -z "$clientzone" -o -z "$clients" ] && \
	   fatal_error "Error: Empty source zone or qualifier: rule \"$rule\""
    fi
    
    if [ "$clientzone" = "${clientzone%\!*}" ]; then
	excludezones=
    else
	excludezones="${clientzone#*\!}"
	clientzone="${clientzone%\!*}"

	[ "$logtarget" = DNAT ] || [ "$logtarget" = REDIRECT ] ||\
	    fatal_error "Error: Exclude list only allowed with DNAT or REDIRECT"
    fi

    if ! validate_zone $clientzone; then
	fatal_error "Error: Undefined Client Zone in rule \"$rule\""
    fi

    # Parse and validate destination

    source=$clientzone

    [ $source = $FW ] && source_hosts= || eval source_hosts=\"\$${source}_hosts\"

    if [ "$servers" = "${servers%:*}" ] ; then
	serverzone="$servers"
	servers=
	serverport=
    else
	serverzone="${servers%%:*}"
	servers="${servers#*:}"
	if [ "$servers" != "${servers%:*}" ] ; then
	    serverport="${servers#*:}"
	    servers="${servers%:*}"
	    [ -z "$serverzone" -o -z "$serverport" ] && \
	        fatal_error "Error: Empty destination zone or server port: rule \"$rule\""
	else
	    serverport=
	    [ -z "$serverzone" -o -z "$servers" ] && \
	        startup_error "Error: Empty destination zone or qualifier: rule \"$rule\""
	fi
    fi

    if ! validate_zone $serverzone; then
	fatal_error "Error: Undefined Server Zone in rule \"$rule\""
    fi

    dest=$serverzone

    # Create canonical chain if necessary

    chain=${source}2${dest}
    ensurechain $chain

    # Generate Netfilter rule(s)

    if [ -n "$MULTIPORT" -a \
	 "$ports" = "${ports%:*}" -a \
	 "$cports" = "${cports%:*}" -a \
	 `list_count $ports` -le 15 -a \
	 `list_count $cports` -le 15 ]
    then
	multioption="-m multiport"
	for client in `separate_list ${clients:=-}`; do
	    for server in `separate_list ${servers:=-}`; do
		port=${ports:=-}
		cport=${cports:=-}
		add_a_rule
	    done
	done
    else
	multioption=
	for client in `separate_list ${clients:=-}`; do
	    for server in `separate_list ${servers:=-}`; do
		for port in `separate_list ${ports:=-}`; do
		    for cport in `separate_list ${cports:=-}`; do
			add_a_rule
		    done
		done
	    done
	done
    fi

    echo "   Rule \"$rule\" added."
}

################################################################################
# Process the rules file						       #
################################################################################
process_rules() # $1 = name of rules file
{
    strip_file rules

    while read target clients servers protocol ports cports address; do
	case "$target" in

	ACCEPT*|DROP*|REJECT*|DNAT*|REDIRECT*)
	    expandv clients servers protocol ports cports address
	    rule="`echo $target $clients $servers $protocol $ports $cports $address`"
	    process_rule
	    ;;
	*)
	    rule="`echo $target $clients $servers $protocol $ports $cports $address`"
	    fatal_error "Error: Invalid Target in rule \"$rule\""
	    ;;
	esac
    done < $TMP_DIR/rules
}

################################################################################
# Process a record from the tos file					       #
#									       #
# The caller has loaded the column contents from the record into the following #
# variables:								       #
#									       #
#    src dst protocol sport dport tos					       #
#									       #
# and has loaded a space-separated list of their values in "rule".	       #
################################################################################
process_tos_rule() {
    ############################################################################
    # Parse the contents of the 'src' variable
    #
    if [ "$src" = "${src%:*}" ]; then
	srczone="$src"
	src=
    else
	srczone="${src%:*}"
	src="${src#*:}"
    fi

    source=
    #
    # Validate the source zone
    #
    if validate_zone $srczone; then
	source=$srczone
    elif [ "$srczone" = "all" ]; then
	source="all"
    else
	error_message "Warning: Undefined Source Zone - rule \"$rule\" ignored"
	return
    fi

    [ -n "$src" ] && case "$src" in
	[0-9]*|![0-9]*)
	    #
	    # IP Address or subnet
	    #
	    src="-s $src"
	    ;;
	~*)
	    src=`mac_match $src`
	    ;;
	*)
	    #
	    # Assume that this is a device name
	    #
	    src="-i $src"
	    ;;
    esac

    ############################################################################
    # Parse the contents of the 'dst' variable
    #
    if [ "$dst" = "${dst%:*}" ]; then
	dstzone="$dst"
	dst=
    else
	dstzone="${dst%:*}"
	dst="${dst#*:}"
    fi

    dest=
    #
    # Validate the destination zone
    #
    if validate_zone $dstzone; then
	dest=$dstzone
    elif [ "$dstzone" = "all" ]; then
	dest="all"
    else
	error_message \
	 "Warning: Undefined Destination Zone - rule \"$rule\" ignored"
	return
    fi

    [ -n "$dst" ] && case "$dst" in
	[0-9]*|![0-9]*)
	    #
	    # IP Address or subnet
	    #
	    ;;
	*)
	    #
	    # Assume that this is a device name
	    #
	    error_message \
	     "Warning: Invalid Destination - rule \"$rule\" ignored"
	    return
	    ;;
    esac

    ############################################################################
    # Setup PROTOCOL and PORT variables
    #
    sports=""
    dports=""

    case $protocol in
	tcp|udp|TCP|UDP|6|17)
	    [ -n "$sport" ] && [ "x${sport}" != "x-" ] && \
		sports="--sport $sport"
	    [ -n "$dport" ] && [ "x${dport}" != "x-" ] && \
		dports="--dport $dport"
	    ;;
	icmp|ICMP|0)
	    [ -n "$dport" ] && [ "x${dport}" != "x-" ] && \
		dports="--icmp-type $dport"
	    ;;
	all|ALL)
	    protocol=
	    ;;
	*)
	    ;;
    esac

    protocol="${protocol:+-p $protocol}"

    tos="-j TOS --set-tos $tos"

    case "$dstzone" in
    all|ALL)
	dst=0.0.0.0/0
	;;
    *)
	[ -z "$dst" ] && eval dst=\$${dstzone}_hosts
	;;
    esac

    for dest in $dst; do
	dest="-d $dest"

	case $srczone in
	$FW)
	    run_iptables -t mangle -A outtos \
		$protocol $dest $dports $sports $tos
	    ;;
	all|ALL)
	    run_iptables -t mangle -A outtos \
		$protocol $dest $dports $sports $tos
	    run_iptables -t mangle -A pretos \
		$protocol $dest $dports $sports $tos
	    ;;
	*)
	    if [ -n "$src" ]; then
		run_iptables -t mangle -A pretos $src \
		    $protocol $dest $dports $sports $tos
	    else
		eval interfaces=\$${srczone}_interfaces

		for interface in $interfaces; do
		    run_iptables -t mangle -A pretos -i $interface \
			$protocol $dest $dports $sports $tos
		done
	    fi
	    ;;
	esac
    done

    echo "   Rule \"$rule\" added."
}

################################################################################
# Process the tos file							       #
################################################################################
process_tos() # $1 = name of tos file
{
    echo "Processing $1..."

    run_iptables -t mangle -N pretos
    run_iptables -t mangle -N outtos

    strip_file tos $1

    while read src dst protocol sport dport tos; do
	expandv src dst protocol sport dport tos
	rule="`echo $src $dst $protocol $sport $dport $tos`"
	process_tos_rule
    done < $TMP_DIR/tos

    run_iptables -t mangle -A PREROUTING -j pretos
    run_iptables -t mangle -A OUTPUT	 -j outtos
}

################################################################################
# Load a Kernel Module							       #
################################################################################
loadmodule() # $1 = module name, $2 - * arguments
{
    local modulename=$1
    local modulefile

    if [ -z "`lsmod | grep $modulename`" ]; then
	shift
	modulefile=$MODULESDIR/${modulename}.o

	if [ -f $modulefile ]; then
	    insmod $modulefile $*
	    return
	fi
	#
	# If the modules directory contains compressed modules then we'll
	# assume that insmod can load them
	#
	modulefile=${modulefile}.gz

	if [ -f $modulefile ]; then
	    insmod $modulefile $*
	fi
    fi
}

################################################################################
# Display elements of a list with leading white space			       #
################################################################################
display_list() # $1 = List Title, rest of $* = list to display
{
    [ $# -gt 1 ] && echo "   $*"
}

################################################################################
# Add rules to the "common" chain to silently drop packets addressed to any of #
# the passed addresses							       #
################################################################################
drop_broadcasts() # $* = broadcast addresses
{
    while [ $# -gt 0 ]; do
	run_iptables -A common -d $1 -j DROP
	shift
    done
}

################################################################################
# Add policy rule ( and possibly logging rule) to the passed chain	       #
################################################################################
policy_rules() # $1 = chain to add rules to
	       # $2 = policy
	       # $3 = loglevel
{
    local target="$2"

    case "$target" in
    ACCEPT)
	;;

    DROP)
	run_iptables -A $1 -j common
	;;
    REJECT)
	run_iptables -A $1 -j common
	target=reject
	;;
    CONTINUE)
	target=
	;;
    *)
	fatal_error "Invalid policy ($policy) for $1"
	;;

    esac

    [ $# -eq 3 ] && [ "x${3}" != "x-" ] && run_iptables -A $1 -j LOG $LOGPARMS \
	--log-prefix "Shorewall:${1}:${2}:" --log-level $3
    [ -n "$target" ] && run_iptables -A $1 -j $target
}

################################################################################
# Generate default policy & log level rules for the passed client & server     #
# zones									       #
#------------------------------------------------------------------------------#
# This function is only called when the canonical chain for this client/server #
# pair is known to exist. If the default policy for this pair specifies the    #
# same chain then we add the policy (and logging) rule to the canonical chain; #
# otherwise add a rule to the canonical chain to jump to the appropriate       #
# policy chain.								       #
################################################################################
default_policy() # $1 = client $2 = server
{
    local chain="${1}2${2}"
    local policy=
    local loglevel=
    local chain1

    jump_to_policy_chain() {
	########################################################################
	# Add a jump to from the canonical chain to the policy chain. On return,
	# $chain is set to the name of the policy chain
	#
	run_iptables -A $chain -j $chain1
	chain=$chain1
    }

    apply_default()
    {
	########################################################################
	# Add the appropriate rules to the canonical chain ($chain) to enforce
	# the specified policy
	#-----------------------------------------------------------------------
	# Construct policy chain name
	#
	chain1=${client}2${server}

	if [ "$chain" = "$chain1" ]; then
	    ####################################################################
	    # The policy chain is the canonical chain; add policy rule to it
	    # The syn flood jump has already been added if required.
	    #
	    policy_rules $chain $policy $loglevel
	else
	    ####################################################################
	    # The policy chain is different from the canonical chain -- approach
	    # depends on the policy
	    #
	    case $policy in
	    ACCEPT)
		if [ -n "$synparams" ]; then
		    ############################################################
		    # To avoid double-counting SYN packets, enforce the policy
		    # in this chain.
		    #
		    enable_syn_flood_protection $chain $chain1
		    policy_rules $chain $policy $loglevel
		else
		    ############################################################
		    # No problem with double-counting so just jump to the
		    # policy chain.
		    #
		    jump_to_policy_chain
		fi
		;;
	    CONTINUE)
		################################################################
		# Silly to jump to the policy chain -- add any logging
		# rules and enable SYN flood protection if requested
		#
		[ -n "$synparams" ] && \
		    enable_syn_flood_protection $chain $chain1
		policy_rules $chain $policy $loglevel
		;;
	    *)
		################################################################
		# DROP or REJECT policy -- enforce in the policy chain and
		# enable SYN flood protection if requested.
		#
		[ -n "$synparams" ] && \
		    enable_syn_flood_protection $chain $chain1
		jump_to_policy_chain
		;;
	    esac
	fi

	echo "   Policy $policy for $1 to $2 using chain $chain"
    }

    while read client server policy loglevel synparams; do
	expandv client server policy loglevel synparams
	case "$client" in
	all|ALL)
	    if [ "$server" = "$2" -o "$server" = "all" ]; then
		apply_default $1 $2
		return
	    fi
	    ;;
	*)
	    if	[ "$client" = "$1" ] && \
		[ "$server" = "all" -o "$server" = "$2" ]
	    then
		apply_default $1 $2
		return
	    fi
	    ;;
	esac
    done < $TMP_DIR/policy

    fatal_error "Error: No default policy for zone $1 to zone $2"
}

################################################################################
# Complete a standard chain
#
#	- run any supplied user exit
#	- search the policy file for an applicable policy and add rules as
#	  appropriate
#	- If no applicable policy is found, add rules for an assummed
#	  policy of DROP INFO
################################################################################
complete_standard_chain() # $1 = chain, $2 = source zone, $3 = destination zone
{
    local policy=
    local loglevel=

    run_user_exit $1

    while read client server policy loglevel synparams; do
	expandv client server policy loglevelsynparams
	
	[ "x$loglevel" = "x-" ] && loglevel=

	case "$client" in
	all|ALL)
	    if [ "$server" = "$3" -o "$server" = "all" ]; then
		policy_rules $1 $policy $loglevel
		return
	    fi
	    ;;
	*)
	    if	[ "$client" = "$2" ] && \
		[ "$server" = "all" -o "$server" = "$3" ]
	    then
		policy_rules $1 $policy $loglevel
		return
	    fi
	    ;;
	esac
    done < $TMP_DIR/policy

    policy_rules $1 DROP INFO
}

################################################################################
# Find the appropriate chain to pass packets from a source zone to a	       #
# destination zone							       #
#									       #
# If the canonical chain for this zone pair exists, echo it's name; otherwise  #
# locate and echo the name of the appropriate policy chain		       #
################################################################################
rules_chain() # $1 = source zone, $2 = destination zone
{
    local chain=${1}2${2}

    havechain $chain && { echo $chain; return; }

    while read client server policy loglevel ; do
	expandv client server policy loglevel
	case "$client" in
	all|ALL)
	    if [ "$server" = "$2" -o "$server" = "all" ]; then
		echo all2${server}
		return
	    fi
	    ;;
	*)
	    if [ "$client" = "$1" -a "$server" = "all" ]; then
		echo ${client}2${server}
		return
	    fi
	    ;;
	esac
    done < $TMP_DIR/policy

    fatal_error "Error: No appropriate chain for zone $1 to zone $2"
}

################################################################################
# Set up Source NAT (including masquerading)				       #
################################################################################
setup_masq()
{
    setup_one() {
	local using

	if [ "$interface" = "${interface%:*}" ]; then
	    destnet="0.0.0.0/0"
	else
	    destnet="${interface#*:}"
	    interface="${interface%:*}"
	fi

	if [ "$subnet" = "${subnet%!*}" ]; then
	    nomasq=
	else
	    nomasq="${subnet#*!}"
	    subnet="${subnet%!*}"
	fi

	chain=`masq_chain $interface`
	iface=

	case $subnet in
	[0-9]*|![0-9]*)
	    source="$subnet"
	    subnet="-s $subnet"
	    ;;
	-)
	    #
	    # Note: This only works if you have the LOCAL NAT patches in the
	    #	    kernel and in the iptables utility
	    #
	    chain=OUTPUT
	    subnet=
	    source=$FW
	    iface="-o $interface"
	    ;;
	*)
	    ipaddr="`run_ip addr show $subnet | grep 'inet '`"
	    source="$subnet"
	    if [ -z "$ipaddr" ]; then
		fatal_error \
		  "Interface $subnet must be up before Shorewall starts"
	    fi

	    subnet="`echo $ipaddr | sed s/"    "// | cut -d' ' -f2`"
	    [ -z "`echo "$subnet" | grep '/'`" ] && subnet="${subnet}/32"
	    subnet="-s $subnet"	    
	    ;;
	esac

	if [ -n "$address" -a -n "$ADD_SNAT_ALIASES" ]; then
	    list_search $address $aliases_to_add || \
		aliases_to_add="$aliases_to_add $external $address"
	fi

	destination=$destnet

	if [ -n "$nomasq" ]; then
	    newchain=masq${masq_seq}
	    run_iptables -t nat -N $newchain
	    addnatrule $chain -d $destnet $iface $subnet -j $newchain
	    masq_seq=$(($masq_seq + 1))
	    chain=$newchain
	    subnet=
	    iface=
	    destnet=

	    for addr in `separate_list $nomasq`; do
		addnatrule $chain -s $addr -j RETURN
	    done
	else
	    destnet="-d $destnet"
	fi

	if [ -n "$address" ]; then
	    addnatrule $chain $subnet $destnet $iface \
		-j SNAT --to-source $address
	    using=" using $address"
	else
	    addnatrule $chain $subnet $destnet $iface -j MASQUERADE
	    using=
	fi

	[ -n "$nomasq" ] && source="$source except $nomasq"
	echo "   To $destination from $source through ${interface}${using}"
    }

    strip_file masq $1

    [ -n "$NAT_ENABLED" ] && echo "Masqueraded Subnets and Hosts:"

    while read interface subnet address; do
	expandv interface subnet address
	[ -n "$NAT_ENABLED" ] && setup_one || \
	    error_message "Warning: NAT disabled; masq rule ignored"
    done < $TMP_DIR/masq
}

################################################################################
# Setup Intrazone chain if appropriate					       #
################################################################################
setup_intrazone() # $1 = zone
{
    eval hosts=\$${1}_hosts

    if [ "$hosts" != "${hosts% *}" ] || \
	have_interfaces_in_zone_with_option $1 multi
    then
	ensurechain ${1}2${1}
    fi
}

###############################################################################
# Process a record from the blacklist file				      #
#									      #
#   $subnet	 = address/subnet					      #
###############################################################################
process_blacklist_rec() {
    local source
    local addr

    for addr in `separate_list $subnet`; do
	case $addr in
	~*)
	    addr=`echo $addr | sed 's/~//;s/-/:/g'`
	    source="--match mac --mac-source $addr"
	    ;;
	*)
	    source="-s $addr"
	    ;;
	esac

	[ -n "$BLACKLIST_LOGLEVEL" ] && \
	    run_iptables -A blacklst $source -j LOG $LOGPARMS --log-prefix \
		"Shorewall:blacklst:$BLACKLIST_DISPOSITION:" \
		--log-level $BLACKLIST_LOGLEVEL
	run_iptables -A blacklst $source -j $disposition

	echo "	 $addr added to Black List"
    done
}

###############################################################################
# Setup the Black List							      #
###############################################################################
setup_blacklist() {
    local interfaces=`find_interfaces_by_option blacklist`
    local f=`find_file blacklist`
    local disposition=$BLACKLIST_DISPOSITION

    if [ -n "$interfaces" -a -f $f ]; then
	echo "Setting up Blacklisting..."

	strip_file blacklist $f

	createchain blacklst no

	for interface in $interfaces; do
	    for chain in `first_chains $interface`; do
		run_iptables -A $chain -j blacklst
	    done
	    
	    echo "   Blacklisting enabled on $interface"
	done

	[ "$disposition" = REJECT ] && disposition=reject

	while read subnet; do
	    expandv subnet
	    process_blacklist_rec
	done < $TMP_DIR/blacklist

    fi
}

###############################################################################
# Refresh the Black List						      #
###############################################################################
refresh_blacklist() {
    local f=`find_file blacklist`
    local disposition=$BLACKLIST_DISPOSITION

    if qt iptables -L blacklst -n ; then
	echo "Refreshing Black List..."

	strip_file blacklist $f

	[ "$disposition" = REJECT ] && disposition=reject

	run_iptables -F blacklst

	while read subnet; do
	    expandv subnet
	    process_blacklist_rec
	done < $TMP_DIR/blacklist
    fi
}

###############################################################################
# Verify that kernel has netfilter support				      #
###############################################################################
verify_os_version() {

    osversion=`uname -r`

    case $osversion in
    2.4.*|2.5.*)
	;;
    *)
	startup_error "Shorewall version $version does not work with kernel version $osversion"
	;;
    esac
}

################################################################################
# Add IP Aliases                                                               #
################################################################################
add_ip_aliases()
{
    do_one() 
    {
	#
	# Folks feel uneasy if they don't see all of the same
	# decoration on these IP addresses that they see when their
	# distro's net config tool adds them. In an attempt to reduce
	# the anxiety level, we have the following code which sets
	# the VLSM and BRD from the primary address
	#
	# Get all of the lines that contain inet addresses with broadcast
	#
	val=`ip addr show $interface | grep 'inet.*brd '` 2> /dev/null

	if [ -n "$val" ] ; then
	    #
	    # Hack off the leading 'inet <ip addr>' (actually cut off the
	    # "/" as well but add it back in).
	    #
	    val="/${val#*/}"
	    #
	    # Now get the VLSM, "brd" and the broadcast address
	    #
	    val=${val%% scope*}
	fi

	run_ip addr add ${external}${val} dev $interface
	echo "$external $interface" >> ${STATEDIR}/nat
	echo "   IP Address $external added to interface $interface"
    }

    set -- $aliases_to_add
    
    while [ $# -gt 0 ]; do
	external=$1
	interface=$2
	shift;shift
	do_one
    done
}

################################################################################
# Load kernel modules required for Shorewall				       #
################################################################################
load_kernel_modules() {

    [ -z "$MODULESDIR" ] &&
    MODULESDIR=/lib/modules/$osversion/kernel/net/ipv4/netfilter

    modules=`find_file modules`

    if [ -f $modules -a -d $MODULESDIR ]; then
	echo "Loading Modules..."
	. $modules
    fi
}

################################################################################
# Perform Initialization						       #
#	- Delete all old rules						       #
#	- Delete all user chains					       #
#	- Set the POLICY on all standard chains and add a rule to allow packets#
#	  that are part of established connections.			       #
#	- Determine the zones
################################################################################
initialize_netfilter () {

    echo "Determining Zones..."

    determine_zones

    [ -z "$zones" ] && startup_error "ERROR: No Zones Defined"

    display_list "Zones:" $zones

    echo "Validating interfaces file..."

    validate_interfaces_file

    echo "Validating hosts file..."

    validate_hosts_file

    echo "Validating Policy file..."

    validate_policy

    echo "Determining Hosts in Zones..."

    determine_interfaces
    determine_hosts

    deletechain shorewall

    [ -n "$NAT_ENABLED" ] && delete_nat

    delete_proxy_arp

    [ -n "$MANGLE_ENABLED" ] && \
	run_iptables -t mangle -F && \
	run_iptables -t mangle -X

    [ -n "$TC_ENABLED" ] && delete_tc

    run_user_exit init

    echo "Deleting user chains..."

    setpolicy INPUT DROP
    setpolicy OUTPUT DROP
    setpolicy FORWARD DROP

    deleteallchains

    setcontinue FORWARD
    setcontinue INPUT
    setcontinue OUTPUT

    [ -n "$CLAMPMSS" ] && \
	run_iptables -A FORWARD -p tcp \
	    --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu

    if [ -z "$NEWNOTSYN" ]; then
	createchain badnew no
	[ -n "$LOGNEWNOTSYN" ] && \
	    run_iptables -A badnew -j LOG $LOGPARMS \
	    --log-prefix "Shorewall:badnew:DROP:" \
	    --log-level $LOGNEWNOTSYN
	run_iptables -A badnew -j DROP
    fi

    createchain icmpdef no
    createchain common	no
    createchain reject	no
    createchain dynamic no
	    
    if [ -f /var/lib/shorewall/save ]; then
	echo "Restoring dynamic rules..."

	while read target ignore1 ignore2 address rest; do
	    case $target in
	    DROP|reject)
		run_iptables -A dynamic -s $address -j $target
		;;
	    *)
		;;
	esac
	done < /var/lib/shorewall/save
    fi
    
    echo "Creating input Chains..."

    for interface in $all_interfaces; do
	createchain `forward_chain $interface` no
	run_iptables -A `forward_chain $interface` -j dynamic
	createchain `input_chain $interface`   no
	run_iptables -A `input_chain $interface`   -j dynamic
    done
}

################################################################################
# Construct zone-independent rules					       #
################################################################################
add_common_rules() {
    logdisp() # $1 = Chain Name
    {
	echo "LOG --log-prefix "Shorewall:${1}:DROP:" --log-level info"
    }
    ############################################################################
    # Reject Rules
    #
    run_iptables -A reject -p tcp -j REJECT --reject-with tcp-reset
    run_iptables -A reject -j REJECT
    ############################################################################
    # dropunclean rules
    #
    interfaces="`find_interfaces_by_option dropunclean`"

    if [ -n "$interfaces" ]; then
	createchain badpkt no

	if [ -n "$LOGUNCLEAN" ]; then
	    logoptions="$LOGPARAMS --log-prefix Shorewall:badpkt:DROP:"
	    logoptions="$logoptions --log-level $LOGUNCLEAN --log-ip-options"
	    run_iptables -A badpkt -p tcp -j LOG $logoptions --log-tcp-options
	    run_iptables -A badpkt -p !tcp -j LOG $logoptions
	fi

	run_iptables -A badpkt -j DROP
	echo "Mangled/Invalid Packet filtering enabled on:"

	for interface in $interfaces; do
	    for chain in `first_chains $interface`; do
		run_iptables -A $chain --match unclean -j badpkt
	    done
	    echo "   $interface"
	done
    fi
    ############################################################################
    # logunclean rules
    #
    interfaces="`find_interfaces_by_option logunclean`"

    if [ -n "$interfaces" ]; then
	createchain logpkt no

	[ -z"$LOGUNCLEAN" ] && LOGUNCLEAN=info
	logoptions="$LOGPARAMS --log-prefix Shorewall:logpkt:LOG:"
	logoptions="$logoptions --log-level $LOGUNCLEAN --log-ip-options"
	run_iptables -A logpkt -p tcp -j LOG $logoptions --log-tcp-options
	run_iptables -A logpkt -p !tcp -j LOG $logoptions

	echo "Mangled/Invalid Packet Logging enabled on:"

	for interface in $interfaces; do
	    for chain in `first_chains $interface`; do
		run_iptables -A $chain --match unclean -j logpkt
	    done
	    echo "   $interface"
	done
    fi
    ############################################################################
    # Common ICMP rules
    #
    icmpdef=`find_file icmpdef`

    if [ -f $icmpdef ]; then
	. $icmpdef
    else
	. `find_file icmp.def`
    fi
    ############################################################################
    # Common rules in each chain
    #
    common=`find_file common`

    if [ -f $common ]; then
	. $common
    else
	. `find_file common.def`
    fi
    ###########################################################################
    # BROADCASTS
    #
    drop_broadcasts `find_broadcasts`
    
    ###########################################################################
    # RFC 1918
    #
    norfc1918_interfaces="`find_interfaces_by_option norfc1918`"

    if [ -n "$norfc1918_interfaces" ]; then
	echo "Enabling RFC1918 Filtering"
	
	strip_file rfc1918
	
	createchain rfc1918 no

	createchain logdrop no
	run_iptables -A logdrop -j `logdisp rfc1918`
	run_iptables -A logdrop -j DROP

	if [ -n "$MANGLE_ENABLED" ]; then
	    ####################################################################
	    # Mangling is enabled -- create a chain in the mangle table to
	    # filter RFC1918 destination addresses. This must be done in the
	    # mangle table before we apply any DNAT rules in the nat table
	    #
	    # Also add a chain to log and drop any RFC1918 packets that we find
	    #
	    run_iptables -t mangle -N man1918
	    run_iptables -t mangle -N logdrop
	    run_iptables -t mangle -A logdrop -j `logdisp man1918`
	    run_iptables -t mangle -A logdrop -j DROP
	fi
	
	while read subnet target; do
	    case $target in
		logdrop|DROP|RETURN)
		    ;;
		*)
		    fatal_error "   Error:Illegal target ($target) for $subnet"
		    ;;
	    esac

	    run_iptables -A rfc1918 -s $subnet -j $target
	    ####################################################################
	    # If packet mangling is enabled, trap packets with an
	    # RFC1918 destination
	    #
	    if [ -n "$MANGLE_ENABLED" ]; then
		run_iptables -t mangle -A man1918 -d $subnet -j $target
	    fi
	done < $TMP_DIR/rfc1918
	    
	for interface in $norfc1918_interfaces; do
	    for chain in `first_chains $interface`; do
		run_iptables -A $chain -j rfc1918
	    done
	    
	    [ -n "$MANGLE_ENABLED" ] && \
		run_iptables -t mangle -A PREROUTING -i $interface -j man1918
	done

    fi
    ############################################################################
    # Process Black List
    #
    setup_blacklist

    ############################################################################
    # Enable the Loopback interface
    #
    run_iptables -A INPUT   -i lo -j ACCEPT
    run_iptables -A OUTPUT  -o lo -j ACCEPT
    ############################################################################
    # Enable icmp output
    #
    run_iptables -A OUTPUT -m state --state ! INVALID -p icmp -j ACCEPT
    ############################################################################
    # Route Filtering
    #
    for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
	echo 0 > $f
    done

    interfaces="`find_interfaces_by_option routefilter`"

    if [ -n "$interfaces" -o -n "$ROUTE_FILTER" ]; then
	echo "Setting up Kernel Route Filtering..."

	if [ -n "$ROUTE_FILTER" ]; then
	    echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter
	else
	    echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter

	    for interface in $interfaces; do
		file=/proc/sys/net/ipv4/conf/$interface/rp_filter
		if [ -f $file ]; then
		    echo 1 > $file
		else
		    error_message \
			"Warning: Cannot set route filtering on $interface"
		fi
	    done
	fi
    fi
    ############################################################################
    # IP Forwarding
    #
    case "$IP_FORWARDING" in
    [Oo][Nn])
	echo 1 > /proc/sys/net/ipv4/ip_forward
	echo "IP Forwarding Enabled"
	;;
    [Oo][Ff][Ff])
	echo 0 > /proc/sys/net/ipv4/ip_forward
	echo "IP Forwarding Disabled!"
	;;
    esac
}

################################################################################
# Scan the policy file defining the necessary chains			       #
# Add the appropriate policy rule(s) to the end of each canonical chain	       #
################################################################################
apply_policy_rules() {
    ############################################################################
    # Create policy chains
    #
    while read client server policy loglevel synparams; do
	expandv client server policy loglevel synparams

	chain=${client}2${server}

	[ -n "$synparams" ] && setup_syn_flood_chain $chain $synparams

	if havechain $chain; then
	    [ -n "$synparams" ] && \
		run_iptables -I $chain 2 -p tcp --syn -j @$chain
	else
	    #
	    # A wild-card rule. Create the chain and add policy
	    # rules
	    #
	    # We must include the ESTABLISHED and RELATED state
	    # rule here to account for replys and reverse
	    # related sessions associated with sessions going
	    # in the other direction
	    #
	    createchain $chain

	    [ "$client" = "all" -o "$server" = "all" ] && \
		policy_rules $chain $policy $loglevel

	    [ -n "$synparams" ] && \
		[ $policy = ACCEPT -o $policy = CONTINUE ] && \
		run_iptables -I $chain 2 -p tcp --syn -j @$chain
	fi

    done < $TMP_DIR/policy
    ############################################################################
    # Add policy rules to canonical chains
    #
    for zone in $FW $zones; do
	setup_intrazone $zone
	for zone1 in $FW $zones; do
	    chain=${zone}2${zone1}
	    if havechain $chain; then
		run_user_exit $chain
		default_policy $zone $zone1
	    fi
	done
    done
}

################################################################################
# Activate the rules							       #
################################################################################
activate_rules() 
{
    local PREROUTING_rule=1
    local POSTROUTING_rule=1
    ############################################################################
    # Jump to a NAT chain from one of the builtin nat chains
    #
    addnatjump() # $1 = BUILTIN chain, $2 = user chain, $3 - * other arguments
    {
	local sourcechain=$1 destchain=$2
	shift
	shift
	
	havenatchain $destchain && \
	    run_iptables -t nat -A $sourcechain $@ -j $destchain
    }
 
    ############################################################################
    # Jump to a RULES chain from one of the builtin nat chains
    #---------------------------------------------------------------------------
    # If NAT_BEFORE_RULES then append the rule to the chain; otherwise, insert
    # the jump near the front of the builtin chain
    #
    addrulejump() # $1 = BUILTIN chain, $2 = user chain, $3 - * other arguments
    {
	local sourcechain=$1 destchain=$2
	shift
	shift
	
	if havenatchain $destchain; then
	    if [ -n "$NAT_BEFORE_RULES" ]; then
		run_iptables -t nat -A $sourcechain $@ -j $destchain
	    else
		eval run_iptables -t nat -I $sourcechain \
		    \$${sourcechain}_rule $@ -j $destchain
		eval ${sourcechain}_rule=\$\(\(\$${sourcechain}_rule + 1\)\)
	    fi
	fi
    }

    #
    # Add jumps from the builtin chains to the nat chains
    #
    addnatjump PREROUTING  nat_in
    addnatjump POSTROUTING nat_out

    for interface in $all_interfaces; do
	addnatjump PREROUTING  `input_chain $interface`	 -i $interface
	addnatjump POSTROUTING `output_chain $interface` -o $interface
    done

    multi_interfaces=`find_interfaces_by_option multi`

    for zone in $zones; do
	eval source_hosts=\$${zone}_hosts

	for host in $source_hosts; do
	    interface=${host%:*}
	    subnet=${host#*:}

	    run_iptables -A OUTPUT -o \
		$interface -d $subnet -j `rules_chain $FW $zone`
	    #
	    # Add jumps from the builtin chains for DNAT and SNAT rules
	    #
	    addrulejump PREROUTING  `dnat_chain $zone` -i $interface -s $subnet
	    addrulejump POSTROUTING `snat_chain $zone` -o $interface -d $subnet

	    run_iptables -A `input_chain $interface` -s $subnet \
		-j `rules_chain $zone $FW`
	done

	for zone1 in $zones; do
	    eval dest_hosts=\$${zone1}_hosts

	    chain="`rules_chain $zone $zone1`"

	    for host in $source_hosts; do
		interface=${host%:*}
		subnet=${host#*:}
		chain1=`forward_chain $interface`
		
		case $interface in
		    *+*)
			multi=yes
			;;
		    *)
			list_search $interface $multi_interfaces && multi=yes || multi=
			;;
		esac

		for host1 in $dest_hosts; do
		    interface1=${host1%:*}
		    subnet1=${host1#*:}

		    if [ $interface != $interface1 -o -n "$multi" ]; then
			run_iptables -A $chain1 -s $subnet \
			    -o $interface1 -d $subnet1 -j $chain
		    fi
		done
	    done
	done
    done

    for interface in $all_interfaces; do
       run_iptables -A FORWARD -i $interface -j `forward_chain $interface`
       run_iptables -A INPUT   -i $interface -j `input_chain $interface`
       addnatjump POSTROUTING `masq_chain $interface` -o $interface
    done

    complete_standard_chain INPUT all $FW
    complete_standard_chain OUTPUT $FW all
    complete_standard_chain FORWARD all all

    run_iptables -D INPUT 1
    run_iptables -D OUTPUT 1
    run_iptables -D FORWARD 1
}

################################################################################
# Start/Restart the Firewall						       #
################################################################################
define_firewall() # $1 = Command (Start or Restart)
{
    echo "${1}ing Shorewall..."

    verify_os_version

    load_kernel_modules

    echo "Initializing..."

    initialize_netfilter

    echo "Configuring Proxy ARP"

    setup_proxy_arp

    setup_nat

    echo "Adding Common Rules"

    add_common_rules

    tunnels=`find_file tunnels`

    [ -f $tunnels ] && \
	echo "Processing $tunnels..." && setup_tunnels $tunnels

    rules=`find_file rules`

    echo "Processing $rules..."

    process_rules $rules

    echo "Adding rules for DHCP"

    for interface in `find_interfaces_by_option dhcp`; do
	run_iptables -A `input_chain $interface` -p udp --dport 67:68 -j ACCEPT
	run_iptables -A OUTPUT	  -o $interface	 -p udp --dport 67:68 -j ACCEPT
    done

    echo "Setting up ICMP Echo handling..."

    filterping_interfaces="`find_interfaces_by_option filterping`"
    noping_interfaces="`find_interfaces_by_option noping`"

    for interface in $all_interfaces; do
	if ! list_search $interface $filterping_interfaces; then
	    if list_search $interface $noping_interfaces; then
		target=DROP
	    else
		target=ACCEPT
	    fi
	    
	    run_iptables -A `input_chain $interface` \
		-p icmp --icmp-type echo-request -j $target
	fi
    done

    policy=`find_file policy`

    echo "Processing $policy..."

    apply_policy_rules

    masq=`find_file masq`

    [ -f $masq ] && setup_masq $masq

    tos=`find_file tos`

    [ -f $tos ] && [ -n "$MANGLE_ENABLED" ] && process_tos $tos

    [ -n "$TC_ENABLED" ] && setup_tc

    echo "Activating Rules..."

    activate_rules

    [ -n "$aliases_to_add" ] && \
	echo "Adding IP Addresses..." && \
	add_ip_aliases

    run_user_exit start

    createchain shorewall no

    date > /var/lib/shorewall/restarted

    report "Shorewall ${1}ed"

    rm -rf $TMP_DIR
}

################################################################################
# Check the configuration						       #
################################################################################
check_config() {
    echo "Verifying Configuration..."
	
    verify_os_version
	
    load_kernel_modules
    
    echo "Determining Zones..."
	
    determine_zones
	
    [ -z "$zones" ] && startup_error "ERROR: No Zones Defined"
	
    display_list "Zones:" $zones
	
    echo "Validating interfaces file..."
	
    validate_interfaces_file
	
    echo "Validating hosts file..."
	
    validate_hosts_file
		
    echo "Determining Hosts in Zones..."

    determine_interfaces
    determine_hosts

    echo "Validating rules file..."

    validate_rules
	
    echo "Validating policy file..."
	
    validate_policy	
	
    rm -rf $TMP_DIR

    echo "Configuration Validated"
}

################################################################################
# Rebuild the common chain						       #
################################################################################
refresh_firewall()
{
    echo "Refreshing Shorewall..."

    echo "Determining Zones and Interfaces..."

    determine_zones

    [ -z "$zones" ] && startup_error "ERROR: No Zones Defined"

    determine_interfaces

    run_user_exit refresh

    run_iptables -F common

    echo "Adding Common Rules"
    ############################################################################
    # Common rules in each chain
    #
    common=`find_file common`

    if [ -f $common ]; then
	. $common
    else
	. `find_file common.def`
    fi
    ###########################################################################
    # BROADCASTS
    #
    drop_broadcasts `find_broadcasts`

    ###########################################################################
    # Blacklist
    #
    refresh_blacklist

    report "Shorewall Refreshed"

    rm -rf $TMP_DIR
}

################################################################################
# Determine the value for a parameter that defaults to Yes		       #
################################################################################
added_param_value_yes() # $1 = Parameter Name, $2 = Parameter value
{
    local val="$2"

    if [ -z "$val" ]; then
	echo "Yes"
    else case $val in
	[Yy][Ee][Ss])
	    echo "Yes"
	    ;;
	[Nn][Oo])
	    echo ""
	    ;;
	*)
	    startup_error "Invalid value ($val) for $1"
	    ;;
	esac
    fi
}

################################################################################
# Determine the value for a parameter that defaults to No		       #
################################################################################
added_param_value_no() # $1 = Parameter Name, $2 = Parameter value
{
    local val="$2"

    if [ -z "$val" ]; then
	echo ""
    else case $val in
	[Yy][Ee][Ss])
	    echo "Yes"
	    ;;
	[Nn][Oo])
	    echo ""
	    ;;
	*)
	    startup_error "Invalid value ($val) for $1"
	    ;;
	esac
    fi
}

################################################################################
# Initialize this program						       #
################################################################################
do_initialize() {
    # Run all utility programs using the C locale
    #
    # Thanks to Vincent Planchenault for this tip #

    export LC_ALL=C

    PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
    ############################################################################
    # Clear all configuration variables
    #
    version=
    FW=
    SUBSYSLOCK=
    STATEDIR=
    ALLOWRELATED=
    LOGRATE=
    LOGBURST=
    LOGPARMS=
    NAT_ENABLED=
    MANGLE_ENABLED=
    ADD_IP_ALIASES=
    ADD_SNAT_ALIASES=
    TC_ENABLED=
    LOGUNCLEAN=
    BLACKLIST_DISPOSITION=
    BLACKLIST_LOGLEVEL=
    CLAMPMSS=
    ROUTE_FILTER=
    NAT_BEFORE_RULES=
    MULTIPORT=
    DETECT_DNAT_IPADDRS=
    MERGE_HOSTS=
    MUTEX_TIMEOUT=
    NEWNOTSYN=
    stopping=
    have_mutex=
    masq_seq=1
    nonat_seq=1
    aliases_to_add=

    TMP_DIR=/tmp/shorewall-$$
    rm -rf $TMP_DIR
    mkdir -p $TMP_DIR && chmod 700 $TMP_DIR || \
       startup_error "Can't create $TMP_DIR"

    trap "rm -rf $TMP_DIR; my_mutex_off; exit 2" 1 2 3 4 5 6 9

    functions=/var/lib/shorewall/functions

    if [ -f $functions ]; then
	. $functions
    else
	startup_error "$functions does not exist!"
    fi

    version_file=/var/lib/shorewall/version

    [ -f $version_file ] && version=`cat $version_file`
    #
    # Strip the files that we use often
    #
    strip_file interfaces
    strip_file hosts

    run_user_exit shorewall.conf
    run_user_exit params

    [ -z "${STATEDIR}" ] && STATEDIR=/var/state/shorewall

    [ -d $STATEDIR ] || mkdir -p $STATEDIR

    [ -z "$FW" ] && FW=fw

    ALLOWRELATED="`added_param_value_yes ALLOWRELATED $ALLOWRELATED`"
    NAT_ENABLED="`added_param_value_yes NAT_ENABLED $NAT_ENABLED`"
    MANGLE_ENABLED="`added_param_value_yes MANGLE_ENABLED $MANGLE_ENABLED`"
    ADD_IP_ALIASES="`added_param_value_yes ADD_IP_ALIASES $ADD_IP_ALIASES`"
    TC_ENABLED="`added_param_value_yes TC_ENABLED $TC_ENABLED`"

    if [ -n "${LOGRATE}${LOGBURST}" ]; then
	LOGPARMS="--match limit"
	[ -n "$LOGRATE" ]  && LOGPARMS="$LOGPARMS --limit $LOGRATE"
	[ -n "$LOGBURST" ] && LOGPARMS="$LOGPARMS --limit-burst $LOGBURST"
    fi

    if [ -n "$IP_FORWARDING" ]; then
	case "$IP_FORWARDING" in
	[Oo][Nn]|[Oo][Ff][Ff]|[Kk][Ee][Ee][Pp])
	    ;;
	*)
	    startup_error "Invalid value ($IP_FORWARDING) for IP_FORWARDING"
	    ;;
	esac
    else
	IP_FORWARDING=On
    fi

    if [ -n "$TC_ENABLED" -a -z "$MANGLE_ENABLED" ]; then
	startup_error "Traffic Control requires Mangle"
    fi

    [ -z "$BLACKLIST_DISPOSITION" ] && BLACKLIST_DISPOSITION=DROP

    CLAMPMSS=`added_param_value_no CLAMPMSS $CLAMPMSS`
    ADD_SNAT_ALIASES=`added_param_value_no ADD_SNAT_ALIASES $ADD_SNAT_ALIASES`
    ROUTE_FILTER=`added_param_value_no ROUTE_FILTER $ROUTE_FILTER`
    NAT_BEFORE_RULES=`added_param_value_yes NAT_BEFORE_RULES $NAT_BEFORE_RULES`
    MULTIPORT=`added_param_value_no MULTIPORT $MULTIPORT`
    DETECT_DNAT_IPADDRS=`added_param_value_no DETECT_DNAT_IPADDRS $DETECT_DNAT_IPADDRS`
    MERGE_HOSTS=`added_param_value_no MERGE_HOSTS $MERGE_HOSTS`
    NEWNOTSYN=`added_param_value_yes NEWNOTSYN $NEWNOTSYN`
}

################################################################################
# Give Usage Information						       #
################################################################################
usage() {
    echo "Usage: $0 [debug] {start|stop|reset|restart|status|refresh|clear]}"
    exit 1
}

################################################################################
# E X E C U T I O N    B E G I N S   H E R E				       #
################################################################################
#
# Start trace if first arg is "debug"
#
[ $# -gt 1 ] && [ "$1" = "debug" ] && { set -x ; shift ; }

nolock=

[ $# -gt 1 ] && [ "$1" = "nolock" ] && { nolock=Yes; shift ; }

[ $# -ne 1 ] && usage

trap "my_mutex_off; exit 2" 1 2 3 4 5 6 9

command="$1"

case "$command" in
    stop)
	do_initialize
	my_mutex_on
	echo -n "Stopping Shorewall..."
	determine_zones
	stop_firewall
	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
	echo "done."
	my_mutex_off
	;;

    start)
	do_initialize
	my_mutex_on
	if qt iptables -L shorewall -n ; then
	    [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	    echo "Shorewall Already Started"
	    my_mutex_off
	    exit 0;
	fi
	define_firewall "Start" && [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	my_mutex_off
	;;

    restart)
	do_initialize
	my_mutex_on
	if qt iptables -L shorewall -n ; then
	    define_firewall "Restart"
	else
	    echo "Shorewall Not Currently Running"
	    define_firewall "Start"
	fi

	[ $? -eq 0 ] && [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	my_mutex_off
	;;

    status)
	echo -e "Shorewall-$version Status at $HOSTNAME - `date`\\n"
	iptables -L -n -v
	;;

    reset)
	iptables -L -n -Z -v
	report "Shorewall Counters Reset"
	date > /var/lib/shorewall/restarted
	;;

    refresh)
	do_initialize
	my_mutex_on
	if ! qt iptables -L shorewall -n ; then
	    echo "Shorewall Not Started"
	    my_mutex_off
	    exit 2;
	fi
	refresh_firewall;
	my_mutex_off
	;;

    clear)
	do_initialize
	my_mutex_on
	echo -n "Clearing Shorewall..."
	determine_zones
	clear_firewall
	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
	echo "done."
	my_mutex_off
	;;

    check)
	do_initialize
	check_config
	;;

    *)
	usage
	;;

esac