Dynamic Zones
Tom
Eastep
2009
Thomas M. Eastep
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
GNU Free Documentation
License
.
Overview
There is sometimes a need to be able to define a zone whose members
are unknown at compile-time. For example, you may wish to require
authentication of internal users before allowing them access to the
internet. When a user is authenticated, the user's IP address is added to
the zone of users permitted web access.
Shorewall provides basic support for defining such zones. This
support is based on ipset, so to use dynamic zones,
you must have installed the xtables-addons.
Defining a Dynamic Zone
A dynamic zone is defined by using the keyword dynamic in the zones
host list.
Example:
/etc/shorewall/zones:#NAME TYPE OPTIONS
loc ipv4
webok:loc ipv4/etc/shorewall/interfaces:
#ZONE INTERFACE BROADCAST OPTIONS
webok eth0 - hosts=dynamic
Once the above definition is added, Shorewall will automatically
create an ipset named webok_eth0 the next time that
Shorewall is started or restarted. Shorewall will create an ipset of type
iphash. If you want to use a different type of
ipset, such as macipmap, then you will want to
manually create that ipset yourself before the next Shorewall
start/restart.
Adding a Host to a Dynamic Zone
Adding a host to a dynamic zone is accomplished by adding the host's
IP address to the appropriate ipset. Shorewall provldes a command for
doing that:
shorewall add interface:address
... zone
Example:
shorewall add eth0:192.168.3.4 webok
Deleting a Host from a Dynamic Zone
Deleting a host from a dynamic zone is accomplished by removing the
host's IP address from the appropriate ipset. Shorewall provldes a command
for doing that:
shorewall delete interface:address
... zone
Example:
shorewall delete eth0:192.168.3.4 webok
Listing the Contents of a Dynamic Zone
The shorewall show command may be used to list the current contents
of a dynamic zone.
shorewall show dynamic
zone
Example:
shorewall show dynamic webok
eth0:
192.168.3.4
192.168.3.9