# # Shorewall version 3.0 - Sample Routestopped File for two-interface configuration. # # /etc/shorewall/routestopped # # This file is used to define the hosts that are accessible when the # firewall is stopped or when it is in the process of being # [re]started. # # Columns are: # # INTERFACE - Interface through which host(s) communicate with # the firewall # HOST(S) - (Optional) Comma-separated list of IP/subnet # addresses. If your kernel and iptables include # iprange match support, IP address ranges are also # allowed. # # If left empty or supplied as "-", # 0.0.0.0/0 is assumed. # OPTIONS - (Optional) A comma-separated list of # options. The currently-supported options are: # # routeback - Set up a rule to ACCEPT traffic from # these hosts back to themselves. # # source - Allow traffic from these hosts to ANY # destination. Without this option or the 'dest' # option, only traffic from this host to other # listed hosts (and the firewall) is allowed. If # 'source' is specified then 'routeback' is redundent. # # dest - Allow traffic to these hosts from ANY # source. Without this option or the 'source' # option, only traffic from this host to other # listed hosts (and the firewall) is allowed. If # 'dest' is specified then 'routeback' is redundent. # # critical - Allow traffic between the firewall and # these hosts throughout '[re]start', 'stop' and # 'clear'. Specifying 'critical' on one or more # entries will cause your firewall to be "totally # open" for a brief window during each of those # operations. # # NOTE: The 'source' and 'dest' options work best when used # in conjunction with ADMINISABSENTMINDED=Yes in # /etc/shorewall/shorewall.conf. # # Example: # # INTERFACE HOST(S) OPTIONS # eth2 192.168.1.0/24 # eth0 192.0.2.44 # br0 - routeback # eth3 - source # # See http://shorewall.net/Documentation.htm#Routestopped and # http://shorewall.net/starting_and_stopping_shorewall.htm for additional # information. # ############################################################################## #INTERFACE HOST(S) OPTIONS eth1 - #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE