shorewall-routestopped 5 routestopped The Shorewall file that governs what traffic flows through the firewall while it is in the 'stopped' state. /etc/shorewall/routestopped This file is used to define the hosts that are accessible when the firewall is stopped or is being stopped. When shorewall-shell is being used, the file also determines those hosts that are accessible when the firewall is in the process of being [re]started. Changes to this file do not take effect until after the next shorewall start or shorewall restart command. The columns in the file are as follows. INTERFACE - interface Interface through which host(s) communicate with the firewall HOST(S) (Optional) - [-|address[,address]...] Comma-separated list of IP/subnet addresses. If your kernel and iptables include iprange match support, IP address ranges are also allowed. If left empty or supplied as "-", 0.0.0.0/0 is assumed. OPTIONS (Optional) - [-|option[,option]...] A comma-separated list of options. The order of the options is not important but the list can contain no embedded whitespace. The currently-supported options are: routeback Set up a rule to ACCEPT traffic from these hosts back to themselves. source Allow traffic from these hosts to ANY destination. Without this option or the dest option, only traffic from this host to other listed hosts (and the firewall) is allowed. If source is specified then routeback is redundant. dest Allow traffic to these hosts from ANY source. Without this option or the source option, only traffic from this host to other listed hosts (and the firewall) is allowed. If dest is specified then routeback is redundant. notrack The traffic will be exempted from conntection tracking. PROTO (Optional) ‒ protocol-name-or-number Only available with Shorewall-perl 4.2.7 and later. DEST PORT(S) (Optional) ‒ service-name/port-number-list Only available with Shorewall-perl 4.2.7 and later. A comma-separated list of port numbers and/or service names from /etc/services. May also include port ranges of the form low-port:high-port if your kernel and iptables include port range support. SOURCE PORT(S) (Optional) ‒ service-name/port-number-list Only available with Shorewall-perl 4.2.7 and later. A comma-separated list of port numbers and/or service names from /etc/services. May also include port ranges of the form low-port:high-port if your kernel and iptables include port range support. The source and dest options work best when used in conjunction with ADMINISABSENTMINDED=Yes in shorewall.conf(5). Example 1: #INTERFACE HOST(S) OPTIONS PROTO DEST SOURCE # PORT(S) PORT(S) eth2 192.168.1.0/24 eth0 192.0.2.44 br0 - routeback eth3 - source eth4 - notrack 41 /etc/shorewall/routestopped http://shorewall.net/starting_and_stopping_shorewall.htm shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5), shorewall-ipsec(5), shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5), shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-route_rules(5), shorewall-rules(5), shorewall.conf(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)