Shorewall Support Guide
|
Before Reporting a Problem or Asking a Question
There
are a number of sources of Shorewall information. Please try these
before you post.
- Shorewall versions earlier
that 1.3.0 are no longer supported.
- More than half of the questions posted on the support
list have answers directly accessible from the Documentation
Index
-
The FAQ has
solutions to more than 20 common problems.
- The
Troubleshooting
Information contains a number of tips to help
you solve common problems.
- The
Errata has links
to download updated components.
- The
Site and Mailing List Archives search facility can locate
documents and posts about similar problems:
Site and Mailing List Archive Search
Problem Reporting Guidelines
- Please remember we only know what
is posted in your message. Do not leave out any information
that appears to be correct, or was mentioned in a previous
post. There have been countless posts by people who were sure
that some part of their configuration was correct when it actually
contained a small error. We tend to be skeptics where detail
is lacking.
- Please keep in mind that you're
asking for free technical support.
Any help we offer is an act of generosity, not an obligation.
Try to make it easy for us to help you. Follow good, courteous
practices in writing and formatting your e-mail. Provide details that
we need if you expect good answers. Exact quoting of
error messages, log entries, command output, and other output is better
than a paraphrase or summary.
-
Please don't describe your environment and then ask
us to send you custom configuration files. We're
here to answer your questions but we can't do
your job for you.
- When reporting a problem, ALWAYS
include this information:
- the exact version of Shorewall
you are running.
shorewall
version
- the exact kernel version you
are running
uname
-a
- the complete, exact output of
ip addr
show
- the complete, exact output of
ip route
show
- If your kernel is modularized,
the exact output from
lsmod
- If you are having
connection problems of any kind then:
1. /sbin/shorewall reset
2. Try the connection that is failing.
3. /sbin/shorewall status
> /tmp/status.txt
4. Post the /tmp/status.txt file as an attachment.
- the exact wording of any
ping
failure responses
- If you installed Shorewall using one of the QuickStart
Guides, please indicate which one.
- If you are running Shorewall under Mandrake using
the Mandrake installation of Shorewall, please say so.
- As
a general matter, please do not edit the diagnostic
information in an attempt to conceal your IP address,
netmask, nameserver addresses, domain name, etc. These aren't
secrets, and concealing them often misleads us (and 80% of the time,
a hacker could derive them anyway from information contained in
the SMTP headers of your post).
- Do you see any "Shorewall" messages ("/sbin/shorewall show log") when
you exercise the function that is giving you problems? If so,
include the message(s) in your post along with a copy of your /etc/shorewall/interfaces
file.
- Please include any of the Shorewall configuration
files (especially the /etc/shorewall/hosts file
if you have modified that file) that you think are
relevant. If you include /etc/shorewall/rules, please include
/etc/shorewall/policy as well (rules are meaningless unless one
also knows the policies).
- If an error occurs when you try to "shorewall start", include a trace
(See the Troubleshooting
section for instructions).
- The list server limits posts to 120kb so don't
post GIFs of your network layout, etc.
to the Mailing List -- your post will be rejected.
The author gratefully acknowleges that the above list was
heavily plagiarized from the excellent LEAF document by Ray
Olszewski found at http://leaf-project.org/pub/doc/docmanager/docid_1891.html.
When using the mailing list, please post in plain text
A growing number of MTAs serving list subscribers are
rejecting all HTML traffic. At least one MTA has gone so far as to
blacklist shorewall.net "for continuous abuse" because it has been
my policy to allow HTML in list posts!!
I think that blocking all HTML
is a Draconian way to control spam and that the ultimate
losers here are not the spammers but the list subscribers
whose MTAs are bouncing all shorewall.net mail. As one list subscriber
wrote to me privately "These e-mail admin's need to get a (expletive
deleted) life instead of trying to rid the planet of HTML based
e-mail". Nevertheless, to allow subscribers to receive list posts
as must as possible, I have now configured the list server at
shorewall.net to strip all HTML from outgoing posts.
Where to Send your Problem Report or to Ask for Help
If you run Shorewall under Bering -- please post your question or problem
to the LEAF Users mailing
list.
If you run Shorewall under MandrakeSoft
Multi Network Firewall (MNF) and you have not purchased
an MNF license from MandrakeSoft then you can post non MNF-specific
Shorewall questions to the Shorewall users mailing
list. Do not expect to get free MNF support on the list.
Otherwise, please post your question or problem to the Shorewall users mailing
list .
To Subscribe to the mailing list go to http://lists.shorewall.net/mailman/listinfo/shorewall-users
.
For information on other Shorewall mailing lists, go to http://lists.shorewall.net
Last Updated 5/28/2003 - Tom Eastep
Copyright © 2001, 2002, 2003 Thomas M. Eastep.