#!/bin/sh
#
#     Shorewall Packet Filtering Firewall Control Program - V1.3 - 6/14/2002
#
#     This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]	      
#
#     (c) 1999,2000,2001,2002 - Tom Eastep (teastep@shorewall.net)
#
#
#	This file should be placed in /sbin/shorewall.
#
#	Shorewall documentation is available at http://shorewall.sourceforge.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License 
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#	
#	If an error occurs while starting or restarting the firewall, the
#	firewall is automatically stopped.
#
#	The firewall uses configuration files in /etc/shorewall/ - skeleton
#	files is included with the firewall.
#
#	Commands are:
#
#	   shorewall start			   Starts the firewall 
#	   shorewall restart			   Restarts the firewall
#	   shorewall stop			   Stops the firewall
#	   shorewall monitor [ refresh-interval ]  Repeatedly Displays firewall status
#						   plus the last 20 "interesting"
#						   packets
#	   shorewall status			   Displays firewall status		 
#	   shorewall reset			   Resets iptables packet and
#						   byte counts
#	   shorewall clear			   Open the floodgates by
#						   removing all iptables rules
#						   and setting the three permanent
#						   chain policies to ACCEPT
#	   shorewall refresh			   Rebuild the common chain to
#						   compensate for a change of
#						   broadcast address on any "detect"
#						   interface.
#	   shorewall show <chain>		   Display the rules in a <chain>
#	   shorewall show log			   Print the last 20 log messages
#	   shorewall show connections		   Show the kernel's connection
#						   tracking table
#	   shorewall show nat			   Display the rules in the nat table
#	   shorewall show {mangle|tos}		   Display the rules in the mangle table
#	   shorewall show tc			   Display traffic control info
#	   shorewall version			   Display the installed version id
#	   shorewall check			   Verify the more heavily-used
#						   configuration files.
#	   shorewall try <directory> [ <timeout> ] Try a new configuration and if
#						   it doesn't work, revert to the
#						   standard one. If a timeout is supplied
#						   the command reverts back to the
#						   standard configuration after that many
#						   seconds have elapsed after successfully
#						   starting the new configuration.
#	   shorewall logwatch [ refresh-interval ] Monitor the local log for Shorewall
#						   messages.
#	   shorewall drop <address> ...		   Temporarily drop all packets from the
#						   listed address(es)
#	   shorewall reject <address> ...	   Temporarily reject all packets from the
#						   listed address(es)
#	   shorewall allow <address> ...	   Reenable address(es) previously 
#						   disabled with "drop" or "reject"
#	   shorewall save			   Save the list of "rejected" and
#						   "dropped" addresses so that it will
#						   be automatically reinstated the
#						   next time that Shorewall starts.
#
# Display a chain if it exists
#
showfirstchain() # $1 = name of chain
{
    awk \
    'BEGIN	 {prnt=0; rslt=1; }; \
    /^$/	 { next; };\
    /^Chain/	 {if ( prnt == 1 ) { rslt=0; exit 0; }; };\
    /Chain '$1'/ { prnt=1; }; \
		 { if (prnt == 1)  print; };\
    END		 { exit rslt; }' /tmp/chains-$$
}

showchain() # $1 = name of chain
{
    if [ "$firstchain" = "Yes" ]; then
	if showfirstchain $1; then
	    firstchain=
	fi
    else
	awk \
	'BEGIN	     {prnt=0;};\
	/^$|^ pkts/  { next; };\
	/^Chain/     {if ( prnt == 1 ) exit; };\
	/Chain '$1'/ { prnt=1; };\
		     { if (prnt == 1)  print; }' /tmp/chains-$$
    fi
}

#################################################################################
# Set the configuration variables from shorewall.conf				#
#################################################################################
get_config() {
    get_statedir

    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages

    if [ ! -f $LOGFILE ]; then
	echo "LOGFILE ($LOGFILE) does not exist!" >&2
	exit 2
    fi
    #
    # See if we have a real version of "tail" -- use separate redirection so
    # that ash (aka /bin/sh on LRP) doesn't crap
    #
    if ( tail -n5 $LOGFILE > /dev/null 2> /dev/null ) ; then
	realtail="Yes"
    else
	realtail=""
    fi

    [ -n "$FW" ] || FW=fw
}

#################################################################################
# Display IPTABLES rules -- we used to store them in a variable but ash		#
# dies when trying to display large sets of rules				#
#################################################################################
display_chains()
{
    trap "rm -f /tmp/chains-$$; exit 1" 1 2 3 4 5 6 9
    
    if [ "$haveawk" = "Yes" ]; then
	#
	# Send the output to a temporary file since ash craps if we try to store
	# the output in a variable.
	#
	iptables -L -n -v > /tmp/chains-$$

	clear
	echo -e "$banner `date`\\n"
	echo -e "Standard Chains\\n"
	firstchain="Yes"
	showchain INPUT
	showchain OUTPUT
	showchain FORWARD

	timed_read

	clear
	echo -e "$banner `date`\\n"
	firstchain=Yes
	echo -e "Input Chains\\n"

	chains=`grep '^Chain.*_[in|fwd]' /tmp/chains-$$ | cut -d' ' -f 2`
	
	for chain in $chains; do
	    showchain $chain
	done
	
	timed_read

	for zone in $zones; do

	    if [ -n "`grep "^Chain \.*${zone}" /tmp/chains-$$`" ] ; then
		clear
		echo -e "$banner `date`\\n"
		firstchain=Yes
		eval display=\$${zone}_display
		echo -e "$display Chains\\n"
		for zone1 in $FW $zones; do
		    showchain ${zone}2$zone1
		    showchain @${zone}2$zone1
		    [ "$zone" != "$zone1" ] && \
			showchain ${zone1}2${zone} && \
			showchain @${zone1}2${zone}
		done

		timed_read
	    fi
	done

	clear
	echo -e "$banner `date`\\n"
	firstchain=Yes
	echo -e "Policy Chains\\n"
	showchain common
	showchain badpkt
	showchain icmpdef
	showchain rfc1918
	showchain blacklst
	showchain reject
	showchain newnotsyn
	for zone in $zones all; do
	    showchain ${zone}2all
	    showchain @${zone}2all
	    [ "$zone" = "all" ] || { showchain all2${zone}; showchain @all2${zone}; }
	done

	timed_read

	clear
	echo -e "$banner `date`\\n"
	firstchain=Yes
	echo -e "Dynamic Chain\\n"
	showchain dynamic
	timed_read

	qt rm -f /tmp/chains-$$
    else
	iptables -L -n -v
	timed_read
    fi
    trap - 1 2 3 4 5 6 9

}

#################################################################################
# Delay $timeout seconds -- if we're running on a recent bash2 then allow	# 
# <enter> to terminate the delay						#
#################################################################################
timed_read () 
{
    read -t $timeout foo 2> /dev/null

    test $? -eq 2 && sleep $timeout
}

#################################################################################
# Display the last $1 packets logged						#
#################################################################################
packet_log() # $1 = number of messages 
{
    local options

    [ -n "$realtail" ] && options="-n$1"

    grep 'Shorewall:\|ipt_unclean' $LOGFILE | \
	 sed s/" $host kernel: Shorewall:"/" "/ | \
	 sed s/" $host kernel: ipt_unclean: "/" "/ | \
	 sed 's/MAC=.*SRC=/SRC=/' | \
	 tail $options
}

#################################################################################
# Show traffic control information						#
#################################################################################
show_tc() {

    show_one_tc() {
	local device=${1%@*}
	qdisc=`tc qdisc list dev $device`

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s -d qdisc show dev $device
	    tc -s -d class show dev $device
	    echo
	fi
    }

    ip link list | \
    while read inx interface details; do
	case $inx in
	[0-9]*)
	    show_one_tc ${interface%:}
	    ;;
	*)
	    ;;
	esac
    done

}

#################################################################################
# Monitor the Firewall								#
#################################################################################
monitor_firewall() # $1 = timeout -- if negative, prompt each time that
		   #		     an 'interesting' packet count changes
{

    get_config
    host=`echo $HOSTNAME | sed 's/\..*$//'`
    oldrejects=`iptables -L -v -n | grep 'LOG'`
    
    if [ $1 -lt 0 ]; then
	let "timeout=- $1"
	pause="Yes"
    else
	pause="No"
	timeout=$1
    fi

    qt which awk && { haveawk=Yes; determine_zones; } || haveawk=

    while true; do
	display_chains
	
	clear
	echo -e "$banner `date`\\n"

	echo -e "Dropped/Rejected Packet Log\\n"

	show_reset

	rejects=`iptables -L -v -n | grep 'LOG'`

	if [ "$rejects" != "$oldrejects" ]; then
	    oldrejects="$rejects"
	    echo -e '\a'
	    packet_log 20

	    if [ "$pause" = "Yes" ]; then
		echo -en '\nEnter any character to continue: '
		read foo
	    else
		timed_read
	    fi
	else
	    echo
	    packet_log 20
	    timed_read
	fi

	clear
	echo -e "$banner `date`\\n"
	echo -e "NAT Status\\n"
	iptables -t nat -L -n -v
	timed_read

	clear
	echo -e "$banner `date`\\n"
	echo -e "\\nTOS/MARK Status\\n"
	iptables -t mangle -L -n -v
	timed_read

	clear
	echo -e "$banner `date`\\n"
	echo -e "\\nTracked Connections\\n"
	cat /proc/net/ip_conntrack
	timed_read

	clear
	echo -e "$banner `date`\\n"
	echo -e "\\nTraffic Shaping/Control\\n"
	show_tc
	timed_read
    done
}

#################################################################################
# Watch the Firewall Log							#
#################################################################################
logwatch() # $1 = timeout -- if negative, prompt each time that
	   #		     an 'interesting' packet count changes
{

    get_config
    host=`echo $HOSTNAME | sed 's/\..*$//'`
    oldrejects=`iptables -L -v -n | grep 'LOG'`
    
    if [ $1 -lt 0 ]; then
	timeout=$((- $1))
	pause="Yes"
    else
	pause="No"
	timeout=$1
    fi

    qt which awk && haveawk=Yes || haveawk=

    while true; do
	clear
	echo -e "$banner `date`\\n"

	echo -e "Dropped/Rejected Packet Log\\n"

	show_reset

	rejects=`iptables -L -v -n | grep 'LOG'`

	if [ "$rejects" != "$oldrejects" ]; then
	    oldrejects="$rejects"
	    echo -e '\a'
	    packet_log 40

	    if [ "$pause" = "Yes" ]; then
		echo -en '\nEnter any character to continue: '
		read foo
	    else
		timed_read
	    fi
	else
	    echo
	    packet_log 40
	    timed_read
	fi
    done
}

#################################################################################
# Give Usage Information							#
#################################################################################
usage() # $1 = exit status
{
    echo "Usage: `basename $0` [debug] [nolock] [-c <directory>] <command>"
    echo "where <command> is one of:"
    echo "   show [<chain>|connections|log|nat|tc|tos]"
    echo "   start"
    echo "   stop"
    echo "   reset"
    echo "   restart"
    echo "   status"
    echo "   clear"
    echo "   refresh"
    echo "   hits"
    echo "   monitor [<refresh interval>]"
    echo "   version"
    echo "   check"
    echo "   try <directory> [ <timeout> ]"
    echo "   logwatch [<refresh interval>]"
    echo "   drop <address> ..."
    echo "   reject <address> ..."
    echo "   allow <address> ..."
    echo "   save"
    exit $1
}

#################################################################################
# Display the time that the counters were last reset                            #
#################################################################################
show_reset() {
    [ -f $STATEDIR/restarted ] && \
	echo -e "Counters reset `cat $STATEDIR/restarted`\\n"
}

#################################################################################
# Execution begins here								#
#################################################################################
debugging=

if [ $# -gt 0 ] && [ "$1" = "debug" ]; then
    debugging=debug
    shift
fi

nolock=

if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then
    nolock=nolock
    shift
fi

SHOREWALL_DIR=
done=0

while [ $done -eq 0 ]; do
    [ $# -eq 0 ] && usage 1
    case $1 in
    -c)
	[ $# -eq 1 ] && usage 1

	if [ ! -d $2 ]; then
	    if [ -e $2 ]; then
		echo "$2 is not a directory" >&2 && exit 2
	    else
		echo "Directory $2 does not exist" >&2 && exit 2
	    fi
	fi

	SHOREWALL_DIR=$2
	shift
	shift
	;;
    *)
	done=1
	;;
    esac
done

if [ $# -eq 0 ]; then
    usage 1
fi

[ -n "$SHOREWALL_DIR" ] && export SHOREWALL_DIR

functions=/usr/lib/shorewall/functions

if [ -f $functions ]; then
    . $functions
else
    echo "$functions does not exist!" >&2
    exit 2
fi

firewall=/usr/lib/shorewall/firewall

if [ ! -f $firewall ]; then
    echo "ERROR: Shorewall is not properly installed"
    if [ -L $firewall ]; then
	echo "	     $firewall is a symbolic link to a"
	echo "	     non-existant file"
    else
	echo "	     The file /usr/lib/shorewall/firewall does not exist"
    fi

    exit 2
fi

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin

version_file=/usr/lib/shorewall/version

if [ -f $version_file ]; then
    version=`cat $version_file`
else
    echo "ERROR: Shorewall is not properly installed"
    echo "	 The file /usr/lib/shorewall/version does not exist"
    exit 1
fi

banner="Shorewall-$version Status at $HOSTNAME -"

case "$1" in
    start|stop|restart|reset|clear|refresh|check)
	[ $# -ne 1 ] && usage 1
	exec $firewall $debugging $nolock $1
	;;
    show)
	[ $# -gt 2 ] && usage 1
	case "$2" in
	connections)
	    echo -e "Shorewall-$version Connections at $HOSTNAME - `date`\\n"
	    cat /proc/net/ip_conntrack
	    ;;
	nat)
	    echo -e "Shorewall-$version NAT at $HOSTNAME - `date`\\n"
	    show_reset
	    iptables -t nat -L -n -v
	    ;;
	tos|mangle)
	    get_config
	    echo -e "Shorewall-$version TOS at $HOSTNAME - `date`\\n"
	    show_reset
	    iptables -t mangle -L -n -v
	    ;;
	log)
	    get_config
	    echo -e "Shorewall-$version Log at $HOSTNAME - `date`\\n"
	    show_reset
	    host=`echo $HOSTNAME | sed 's/\..*$//'`
	    packet_log 20
	    ;;
	tc)
	    echo -e "Shorewall-$version Traffic Control at $HOSTNAME - `date`\\n"
	    show_tc
	    ;;
	*)
	    get_config
	    echo -e "Shorewall-$version Chain $2 at $HOSTNAME - `date`\\n"
	    show_reset
	    iptables -L $2 -n -v
	    ;;
	esac
	;;
    monitor)
	if [ $# -eq 2 ]; then
	    monitor_firewall $2
	elif [ $# -eq 1 ]; then
	    monitor_firewall 30
	else
	    usage 1
	fi
	;;
    status)
	[ $# -eq 1 ] || usage 1
	get_config
	clear
	echo -e "Shorewall-$version Status at $HOSTNAME - `date`\\n"
	show_reset
	host=`echo $HOSTNAME | sed 's/\..*$//'`
	iptables -L -n -v
	echo
	packet_log 20
	echo
	iptables -t nat -L -n -v
	echo
	iptables -t mangle -L -n -v
	echo
	cat /proc/net/ip_conntrack
	;;
    hits)
	[ $# -eq 1 ] || usage 1
	get_config
	clear
	echo -e "Shorewall-$version Hits at $HOSTNAME - `date`\\n"
	timeout=30

	if [ `grep -c "Shorewall:" $LOGFILE ` -gt 0 ] ; then
	    echo "   HITS IP		  DATE"
	    echo "   ---- --------------- ------"
	    grep "Shorewall:" $LOGFILE | sed 's/\(.\{6\}\)\(.*SRC=\)\(.*\)\( DST=.*\)/\3	\1/' | sort | uniq -c | sort -rn
	    echo ""

	    echo "   HITS IP		  PORT"
	    echo "   ---- --------------- -----"
	    grep "Shorewall:" $LOGFILE | sed 's/\(.*SRC=\)\(.*\)\( DST=.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2	\4/
						t
						s/\(.*SRC=\)\(.*\)\( DST=.*\)/\2/' | sort | uniq -c | sort -rn
	    echo ""

	    echo "   HITS DATE"
	    echo "   ---- ------"
	    grep "Shorewall:" $LOGFILE | sed 's/\(.\{6\}\)\(.*\)/\1/' | sort | uniq -c | sort -rn
	    echo ""

	    echo "   HITS  PORT SERVICE(S)"
	    echo "   ---- ----- ----------" 
	    grep 'Shorewall:.*DPT' $LOGFILE | sed 's/\(.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2/' | sort | uniq -c | sort -rn | \
	    while read count port ; do
		# List all services defined for the given port
		srv=`grep "^[^#].*\\b$port/" /etc/services | cut -f 1 | sort -u`
		srv=`echo $srv | sed 's/ /,/g'`

		if [ -n "$srv" ] ; then
		    printf '%7d %5d %s\n' $count $port $srv
		else
		    printf '%7d %5d\n' $count $port
		fi
	    done
	fi
	;;
    version)
	echo $version
	;;
    try)
	[ -n "$SHOREWALL_DIR" ] && startup_error "Error: -c option may not be used with \"try\""
	[ $# -lt 2 -o $# -gt 3 ] && usage 1
	if ! $0 -c $2 restart; then
	    if ! iptables -L shorewall > /dev/null 2> /dev/null; then
		$0 start
	    fi
	elif ! iptables -L shorewall > /dev/null 2> /dev/null; then
	    $0 start
	elif [ $# -eq 3 ]; then
	    sleep $3
	    $0 restart
	fi
	;;
    logwatch)
	if [ $# -eq 2 ]; then
	    logwatch $2
	elif [ $# -eq 1 ]; then
	    logwatch 30
	else
	    usage 1
	fi
	;;
    drop)
	[ $# -eq 1 ] && usage 1
	mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    iptables -A dynamic -s $1 -j DROP || break 1
	    echo "$1 Dropped"
	done
	mutex_off
	;;
    reject)
	[ $# -eq 1 ] && usage 1
	mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    iptables -A dynamic -s $1 -j reject || break 1
	    echo "$1 Rejected"
	done
	mutex_off
	;;
    allow)
	[ $# -eq 1 ] && usage 1
	mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    if	qt iptables -D dynamic -s $1 -j reject; then
		#
		# Address was rejected -- silently remove any drop as well
		#
		qt iptables -D dynamic -s $1 -j DROP
		echo "$1 Allowed"
	    elif qt iptables -D dynamic -s $1 -j DROP; then
		echo "$1 Allowed"
	    else
		echo "$1 Not Dropped or Rejected"
	    fi
	done
	mutex_off
	;;
    save)
	[ $# -ne 1 ] && usage 1
	mutex_on
	if qt iptables -L shorewall -n; then
	    if iptables -L dynamic -n > /var/lib/shorewall/save; then
		echo "Dynamic Rules Saved"
	    else
		echo "Error Saving the Dynamic Rules"
	    fi
	else
	    echo "Shorewall isn't started"
	fi
	mutex_off
	;;
    *)
	usage 1
	;;
esac