Shorewall Support Guide
|
Before Reporting a Problem or Asking a Question
There are a number of sources of Shorewall information. Please
try these before you post.
- Shorewall versions
earlier that 1.3.0 are no longer supported.
- More than half of the questions posted on the support
list have answers directly accessible from the Documentation
Index
-
The FAQ
has solutions to more than 20 common problems.
-
The Troubleshooting
Information contains a number of tips
to help you solve common problems.
-
The Errata
has links to download updated components.
-
The Site and Mailing List Archives search facility
can locate documents and posts about similar problems:
Site and Mailing List Archive Search
Problem Reporting Guidelines
- Please remember we only
know what is posted in your message. Do not leave out
any information that appears to be correct, or was mentioned
in a previous post. There have been countless posts by people
who were sure that some part of their configuration was correct
when it actually contained a small error. We tend to be skeptics
where detail is lacking.
- Please keep in mind that
you're asking for free technical
support. Any help we offer is an act of generosity, not an obligation.
Try to make it easy for us to help you. Follow good, courteous
practices in writing and formatting your e-mail. Provide details
that we need if you expect good answers. Exact quoting
of error messages, log entries, command output, and other output is
better than a paraphrase or summary.
-
Please don't describe your environment and then
ask us to send you custom configuration files.
We're here to answer your questions but we can't
do your job for you.
- When reporting a problem,
ALWAYS include this information:
- the exact version of
Shorewall you are running.
shorewall version
- the complete, exact
output of
ip
addr show
- the complete, exact
output of
ip
route show
- THIS
IS IMPORTANT! If your
problem is that some type of connection to/from or through your firewall
isn't working then please perform the following four steps:
1. /sbin/shorewall reset
2. Try making the connection that is failing.
3. /sbin/shorewall
status > /tmp/status.txt
4. Post the /tmp/status.txt file as an
attachment (you may compress it if you like).
- the exact wording of any
ping
failure responses
- If you installed Shorewall using one of the QuickStart
Guides, please indicate which one.
- If you are running Shorewall under Mandrake
using the Mandrake installation of Shorewall, please say so.
- As a general matter, please do not edit the
diagnostic information in an attempt to conceal
your IP address, netmask, nameserver addresses, domain name,
etc. These aren't secrets, and concealing them often misleads
us (and 80% of the time, a hacker could derive them anyway
from information contained in the SMTP headers of your post).
- Do you see any "Shorewall" messages
("/sbin/shorewall show log")
when you exercise the function that is giving you problems?
If so, include the message(s) in your post along with a copy of
your /etc/shorewall/interfaces file.
- Please include any of the Shorewall configuration
files (especially the /etc/shorewall/hosts file
if you have modified that file) that you think are
relevant. If you include /etc/shorewall/rules, please include
/etc/shorewall/policy as well (rules are meaningless unless
one also knows the policies).
- If an error occurs when you try
to "shorewall start", include
a trace (See the Troubleshooting
section for instructions).
- The list server limits posts to 120kb
so don't post GIFs of your network
layout, etc. to the Mailing List -- your post will be
rejected.
The author gratefully acknowleges that the above list was
heavily plagiarized from the excellent LEAF document by Ray
Olszewski found at http://leaf-project.org/pub/doc/docmanager/docid_1891.html.
When using the mailing list, please post in plain text
A growing number of MTAs serving list subscribers are
rejecting all HTML traffic. At least one MTA has gone so far as to
blacklist shorewall.net "for continuous abuse" because it has been
my policy to allow HTML in list posts!!
I think that blocking all
HTML is a Draconian way to control spam and that the
ultimate losers here are not the spammers but the list subscribers
whose MTAs are bouncing all shorewall.net mail. As one list
subscriber wrote to me privately "These e-mail admin's need
to get a (expletive deleted) life instead of trying to
rid the planet of HTML based e-mail". Nevertheless, to allow
subscribers to receive list posts as must as possible, I have now
configured the list server at shorewall.net to strip all HTML from
outgoing posts.
Where to Send your Problem Report or to Ask for Help
If you run Shorewall under Bering -- please post your question or problem
to the LEAF Users mailing
list.
If you run Shorewall
under MandrakeSoft Multi Network Firewall (MNF) and
you have not purchased an MNF license from MandrakeSoft then
you can post non MNF-specific Shorewall questions to the Shorewall users mailing
list. Do not expect to get free MNF support on the list
Otherwise, please post your question or problem to the Shorewall users mailing
list.
Subscribing to the Users Mailing List
To Subscribe to the mailing list go to http://lists.shorewall.net/mailman/listinfo/shorewall-users
Secure: https//lists.shorewall.net/mailman/listinfo/shorewall-users.
For information on other Shorewall mailing lists, go to http://lists.shorewall.net
Last Updated 8/1/2003 - Tom Eastep
Copyright © 2001, 2002, 2003 Thomas M. Eastep.