Tom Eastep 2012 Thomas M. Eastep Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover, and with no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.

There are a number of applications that create connections dynamically between a client and server. These connections use temporary TCP or UDP ports, so static configuration of firewall rules to allow those connections would require a very lax firewall configuration. To deal with these problem applications, Netfilter supports the concept of a helper. Each helper monitors traffic to/from the default primary port used by the application and opens the firewall to accept temporary connections created by the primary session. There are helpers for the following applications; default ports monitored by each helper are listed in parentheses: Amanda (UDP 10080) FTP (TCP 21) H323 (UDP 1719, TCP 1720) IRC (TCP 6667) Netbios-NS (UDP 137) PPTP (TCP 1729) SANE (TCP 6566) SIP (UDP 5060) SNMP (UDP 161) TFTP (UDP 69)

In a modular kernel, each helper is typically packaged as two kernel modules. One module handles connection tracking where NAT isn't involved and the other module handles NAT. For example, the FTP helper consists of these two modules (kernels 2.6.20 and later): nf_conntrack_ftp nf_nat_ftp Note that the naming convention is nf_conntrack_application and nf_nat_application; more about that below. The modules are not auto-loaded and must be loaded explicitly using the modprob or insmod utilities. Many of the modules allow parameters to be specified when the module is loaded. Among the common parameters is the ports parameter that lists one or more ports that the module is to monitor. This allows running the application on a non-standard port.

Iptables supports two ways of interacting with modules: Helper Match This match (-m helper --helper name) allows selection of packets from connections monitored or created by the named helper. CT Target This target (-j CT --helper name ...) , introduced in the 3.4 kernels, allows for explicit association of a helper with a connection. It is important to note that the name used in iptables is not always the same as the name in the kernel module. Names used in iptables are shown in the following table: Name of kernel module Name recognized by iptables nf_conntrack_amanda amanda nf_conntrack_ftp ftp nf_conntrack_h323 RAS (udp 1719), Q.931 (tcp 1720) nf_conntrack_irc irc nf_conntrack_netbios_ns netbios-ns nf_conntrack_pptp pptp nf_conntrack_sane sane nf_conntrack_sip sip nf_conntrack_snmp snmp nf_conntrack_tftp tftp Netfilter helpers present an opportunity for attackers to attempt to breach your firewall by IP address spoofing; See https://home.regit.org/netfilter-en/secure-use-of-helpers/ for a description of the Netfilter facilities available to meet these attacks.

Shorewall includes support for helpers is several areas. These areas are covered in the sections below.

Shorewall includes support for loading the helper modules as part of its support for loading kernel modules in general. There are several options in shorewall.conf (5) that deal with kernel module loading: MODULESDIR This option specifies a comma-separated list of directories where Shorewall will look for kernel modules to load. MODULE_SUFFIX Lists the possible suffixes for module names. LOAD_HELPERS_ONLY Controls whether Shorewall should load only the helpers and leave the other modules to the auto-loader. This option dramatically reduces the time to process a shorewall start or shorewall restart command. HELPERS This option was added in Shorewall 4.5.7 and lists the modules to be enabled for association with connections. This option is fully functional only on systems running kernel 3.5 or later. The module names allowed in this list are amanda, ftp, h323, irc, netbios-ns, pptp, sane, sip, snmp and tftp. The helper modules to be loaded are listed in the file /usr/share/shorewall/helpers. If you wish to customize that file to load only a subset of the helpers or to specify module parameters, then copy the file to /etc/shorewall/ and modify the copy. That way, your changes won't be overwritten the next time that Shorewall is updated on your system. On systems running a a kernel earlier than 3.5, not all of the helpers can be totally disabled. The following modules can be disabled by using the parameter ports=0 in /etc/shorewall/helpers: ftp irc sane sip tftp

The iptables helper match is supported by Shorewall in the form of the HELPER column in shorewall-tcrules (5). The CT target is supported directly in shorewall-conntrack (5). In these files, Shorewall supports the same module names as iptables; see the table above.