Port Knocking and Other Uses of 'Recent Match'
Tom
Eastep
2005
2006
2009
2013
Thomas M. Eastep
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
GNU Free Documentation
License
.
The techniques described in this article were superseded in
Shorewall 4.5.19 with the introduction of Shorewall Events.
The feature described in this article require 'Recent Match' in
your iptables and kernel. See the output of shorewall show
capabilities to see if you have that match.
What is Port Knocking?
Port knocking is a technique whereby attempting to connect to port A
enables access to port B from that same host. For the example on which
this article is based, see http://www.soloport.com/iptables.html
which should be considered to be part of this documentation.
Implementing Port Knocking in Shorewall
In order to implement this solution, your iptables and kernel must
support the 'recent match' extension (see FAQ
42).
In this example:
Attempting to connect to port 1600 enables SSH access. Access is
enabled for 60 seconds.
Attempting to connect to port 1601 disables SSH access (note
that in the article linked above, attempting to connect to port 1599
also disables access. This is an port scan defence as explained in the
article).
To implement that approach:
Add an action named SSHKnock (see the Action documentation). Leave the
action.SSHKnock file empty.
Create /etc/shorewall/SSHKnock with the following
contents.use Shorewall::Chains;
if ( $level ) {
log_rule_limit( $level,
$chainref,
'SSHKnock',
'ACCEPT',
'',
$tag,
'add',
'-p tcp --dport 22 -m recent --rcheck --name SSH ' );
log_rule_limit( $level,
$chainref,
'SSHKnock',
'DROP',
'',
$tag,
'add',
'-p tcp ! --dport 22 ' );
}
add_rule( $chainref, '-p tcp --dport 22 -m recent --rcheck --seconds 60 --name SSH -j ACCEPT' );
add_rule( $chainref, '-p tcp --dport 1599 -m recent --name SSH --remove -j DROP' );
add_rule( $chainref, '-p tcp --dport 1600 -m recent --name SSH --set -j DROP' );
add_rule( $chainref, '-p tcp --dport 1601 -m recent --name SSH --remove -j DROP' );
1;
Now if you want to protect SSH access to the firewall from the
Internet, add this rule in
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DPORT
SSHKnock net $FW tcp 22,1599,1600,1601
If you want to log the DROPs and ACCEPTs done by SSHKnock, you
can just add a log level as in:
#ACTION SOURCE DEST PROTO DPORT
SSHKnock:info net $FW tcp 22,1599,1600,1601
Assume that you forward port 22 from external IP address
206.124.146.178 to internal system 192.168.1.5. In
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST
DNAT- net 192.168.1.5 tcp 22 - 206.124.146.178
SSHKnock net $FW tcp 1599,1600,1601
SSHKnock net loc:192.168.1.5 tcp 22 - 206.124.146.178
You can use SSHKnock with DNAT on earlier releases provided
that you omit the ORIGDEST entry on the second SSHKnock rule. This
rule will be quite secure provided that you specify 'routefilter' on
your external interface and have NULL_ROUTE_RFC1918=Yes in
shorewall.conf.
For another way to implement Port Knocking, see the Manual Chain documentation.
Limiting Per-IP Connection Rate
This information has been moved to the Actions article.