shorewall-policy 5 Configuration Files policy Shorewall policy file /etc/shorewall[6]/policy This file defines the high-level policy for connections between zones defined in shorewall-zones(5). The order of entries in this file is important This file determines what to do with a new connection request if we don't get a match from the shorewall-blrules(5) or shorewall-rules(5) files. For each source/destination pair, the file is processed in order until a match is found ("all" will match any source or destination). Intra-zone policies are pre-defined For $FW and for all of the zones defined in shorewall-zones(5), the POLICY for connections from the zone to itself is ACCEPT (with no logging or TCP connection rate limiting) but may be overridden by an entry in this file. The overriding entry must be explicit (specifying the zone name in both SOURCE and DEST) or it must use "all+" (Shorewall 4.5.17 or later). Similarly, if you have IMPLICIT_CONTINUE=Yes in shorewall.conf(5), then the implicit policy to/from any sub-zone is CONTINUE. These implicit CONTINUE policies may also be overridden by an explicit entry in this file. The columns in the file are as follows (where the column name is followed by a different name in parentheses, the different name is used in the alternate specification syntax). SOURCE - zone[,...[+]]|$FW|all[+][!ezone[,...]] Source zone. Must be the name of a zone defined in shorewall-zones(5), $FW, "all" or "all+". Support for all+ was added in Shorewall 4.5.17. all does not override the implicit intra-zone ACCEPT policy while all+ does. Beginning with Shorewall 5.0.12, multiple zones may be listed separated by commas. As above, if '+' is specified after two or more zone names, then the policy overrides the implicit intra-zone ACCEPT policy if the same zone appears in both the SOURCE and DEST columns. Beginning with Shorewall 5.2.3, a comma-separated list of excluded zones preceded by "!" may follow all or all+. DEST - zone[,...[+]]|$FW|all[+][!ezone[,...]] Destination zone. Must be the name of a zone defined in shorewall-zones(5), $FW, "all" or "all+". If the DEST is a bport zone, then the SOURCE must be "all", "all+", another bport zone associated with the same bridge, or it must be an ipv4 zone that is associated with only the same bridge. Support for "all+" was added in Shorewall 4.5.17. "all" does not override the implicit intra-zone ACCEPT policy while "all+" does. Beginning with Shorewall 5.0.12, multiple zones may be listed separated by commas. As above, if '+' is specified after two or more zone names, then the policy overrides the implicit intra-zone ACCEPT policy if the same zone appears in both the SOURCE and DEST columns. Beginning with Shorewall 5.2.3, a comma-separated list of excluded zones preceded by "!" may follow all or all+. POLICY - {ACCEPT|DROP|REJECT|BLACKLIST|CONTINUE|QUEUE|NFQUEUE[([queuenumber1[:queuenumber2[c]][,bypass]]|bypass)]|NONE}[:{[+]policy-action[:level][,...]|None}] Policy if no match from the rules file is found. If the policy is neither CONTINUE nor NONE then the policy may be followed by ":" and one of the following: The word "None" or "none". This causes any default action defined in shorewall.conf(5) to be omitted for this policy. The name of an action with optional parameters enclosed in parentheses. The action will be invoked before the policy is enforced. Actions can have parameters specified. Beginning with Shorewall 4.5.10, the action name can be followed optionally by a colon and a log level. The level will be applied to each rule in the action or body that does not already have a log level. Beginning with Shorewall 5.1.2, multiple action[:level] specification may be listeded, separated by commas. The actions are invoked in the order listed. Also beginning with Shorewall 5.1.2, the policy-action list can be prefixed with a plus sign ("+") indicating that the listed actions are in addition to those listed in the related _DEFAULT setting in shorewall.conf(5). Possible policies are: ACCEPT Accept the connection. DROP Ignore the connection request. REJECT For TCP, send RST. For all other, send an "unreachable" ICMP. BLACKLIST Added in Shorewall 5.1.1 and requires that the DYNAMIC_BLACKLIST setting in shorewall.conf(5) specifies ipset-based dynamic blacklisting. The SOURCE IP address is added to the blacklist ipset and the connection request is ignored. QUEUE Queue the request for a user-space application such as Snort-inline. NFQUEUE Queue the request for a user-space application using the nfnetlink_queue mechanism. If a queuenumber1 is not given, queue zero (0) is assumed. Beginning with Shorewall 4.6.10, a second queue number (queuenumber2) may be given. This specifies a range of queues to use. Packets are then balanced across the given queues. This is useful for multicore systems: start multiple instances of the userspace program on queues x, x+1, .. x+n and use "x:x+n". Packets belonging to the same connection are put into the same nfqueue. Beginning with Shorewall 5.1.0, queuenumber2 may be followed by the letter 'c' to indicate that the CPU ID will be used as an index to map packets to the queues. The idea is that you can improve performance if there's a queue per CPU. Requires the NFQUEUE CPU Fanout capability in your kernel and iptables. Beginning with Shorewall 4.6.10, the keyword bypass can be given. By default, if no userspace program is listening on an NFQUEUE, then all packets that are to be queued are dropped. When this option is used, the NFQUEUE rule behaves like ACCEPT instead. CONTINUE Pass the connection request past any other rules that it might also match (where the source or destination zone in those rules is a superset of the SOURCE or DEST in this policy). See shorewall-nesting(5) for additional information. NONE Assume that there will never be any packets from this SOURCE to this DEST. Shorewall will not create any infrastructure to handle such packets and you may not have any rules with this SOURCE and DEST in the /etc/shorewall/rules file. If such a packet is received, the result is undefined. NONE may not be used if the SOURCE or DEST columns contain the firewall zone ($FW) or "all". LOGLEVEL (loglevel) - [log-level|ULOG|NFLOG] Optional - if supplied, each connection handled under the default POLICY is logged at that level. If not supplied, no log message is generated. See syslog.conf(5) for a description of log levels. You may also specify ULOG or NFLOG (must be in upper case). This will log to the ULOG or NFLOG target and will send to a separate log through use of ulogd (http://www.netfilter.org/projects/ulogd/index.html). For a description of logging, see shorewall-logging(5). If you don't want to log but need to specify the following column, place "-" here. RATE (rate) - [-|limit] where limit is one of: [-|[{s|d}[/vlsm]:[[name][(ht-buckets,ht-max)]:]]]rate/{sec|min|hour|day}[:burst] [name1:]rate1/{sec|min|hour|day}[:burst1],[name2:]rate2/{sec|min|hour|day}[:burst2] If passed, specifies the maximum TCP connection rate and the size of an acceptable burst. If not specified, TCP connections are not limited. If the burst parameter is omitted, a value of 5 is assumed. When s: or d: is specified, the rate applies per source IP address or per destination IP address respectively. The name may be chosen by the user and specifies a hash table to be used to count matching connections. If not give, the name shorewall is assumed. Where more than one POLICY or rule specifies the same name, the connections counts for the policies are aggregated and the individual rates apply to the aggregated count. Beginning with Shorewall 5.2.1, the s or d may be followed by a slash ("/") and an integer vlsm. When a vlsm is specified, all source or destination addresses encountered will be grouped according to the given prefix length and the so-created subnet will be subject to the rate limit. Beginning with Shorewall 4.6.5, two limits may be specified, separated by a comma. In this case, the first limit (name1, rate1, burst1) specifies the per-source IP limit and the second limit specifies the per-destination IP limit. Example: client:10/sec:20,:60/sec:100 Beginning with Shorewall 5.2.1, the table name, if any, may be followed by two integers separated by commas and enclosed in parentheses. The first integer (ht-buckets) specifies the number of buckets in the generated hash table. The second integer (ht-max) specifies the maximum number of entries in the hash table. Example: s:client(1024,65536):10/sec CONNLIMIT - limit[:mask] May be used to limit the number of simultaneous connections from each individual host to limit connections. While the limit is only checked on connections to which this policy could apply, the number of current connections is calculated over all current connections from the SOURCE host. By default, the limit is applied to each host individually but can be made to apply to networks of hosts by specifying a mask. The mask specifies the width of a VLSM mask to be applied to the source address; the number of current connections is then taken over all hosts in the subnet source-address/mask. All connections from the local network to the internet are allowed All connections from the internet are ignored but logged at syslog level KERNEL.INFO. All other connection requests are rejected and logged at level KERNEL.INFO. #SOURCE DEST POLICY LOG BURST:LIMIT # LEVEL loc net ACCEPT net all DROP info # # THE FOLLOWING POLICY MUST BE LAST # all all REJECT info /etc/shorewall/policy /etc/shorewall6/policy https://shorewall.org/configuration_file_basics.htm#Pairs shorewall(8)