Shorewall 2.0.3 Beta 2

----------------------------------------------------------------------
Problems Corrected since 2.0.2

1) The 'firewall' script is not purging temporary restore files in
   /var/lib/shorewall. These files have names of the form
   "restore-nnnnn".

2) The /var/lib/shorewall/restore script did not load the kernel
   modules specified in /etc/shorewall/modules.

3) Specifying a null common action in /etc/shorewall/actions (e.g.,
   :REJECT) results in a startup error.

4) If /var/lib/shorewall does not exist, shorewall start fails.

5) DNAT rules with a dynamic source zone don't work properly. When
   used, these rules cause the rule to be checked against ALL input,
   not just input from the designated zone.

6) The install.sh script reported installing some files in
   /etc/shorewall when the files were actually installed in
   /usr/share/shorewall.

7) Shorewall checks netfilter capabilities before loading kernel
   modules. Hence if kernel module autoloading isn't enabled, the
   capabilities will be misdetected.

8) The 'newnotsyn' option in /etc/shorewall/hosts has no effect.

9) The file /etc/init.d/shorewall now gets proper ownership when the
   RPM is built by a non-root user.

-----------------------------------------------------------------------
Issues when migrating from Shorewall 2.0.2 to Shorewall 2.0.3:

1) The 'dropNonSyn' standard builtin action has been replaced with the
   'dropNotSyn' standard builtin action. The old name can still be used
   but will generate a warning.

-----------------------------------------------------------------------
New Features:

1) Shorewall now supports multiple saved configurations.

   a) The default saved configuration (restore script) in
      /var/lib/shorewall is now specified using the RESTOREFILE option
      in shorewall.conf. If this variable isn't set then to maitain
      backward compatibility, 'restore' is assumed.
      
      The value of RESTOREFILE must be a simple file name; no slashes
      ("/") may be included.
      
   b)  The "save" command has been extended to be able to specify the
      name of a saved configuration.

	   shorewall save [ <file name> ]

      The current state is saved to /var/lib/shorewall/<file name>. If
      no <file name> is given, the configuration is saved to
      the file determined by the RESTOREFILE setting.

   c) The "restore" command has been extended to be able to specify 
      the name of a saved configuration:

	  shorewall restore [ <file name> ]

      The firewall state is restored from /var/lib/shorewall/<file
      name>. If no <file name> is given, the firewall state is
      restored from the file determined by the RESTOREFILE setting.

   c) The "forget" command has changed. Previously, the command
      unconditionally removed the /var/lib/shorewall/save file which
      records the current dynamic blacklist. The "forget" command now
      leaves that file alone.

      Also, the "forget" command has been extended to be able to
      specify the name of a saved configuration:

	      shorewall forget [ <file name> ]

      The file /var/lib/shorewall/<file name> is removed. If no <file
      name> is given, the file determined by the RESTOREFILE setting
      is removed.

   d) The "shorewall -f start" command restores the state from the
      file determined by the RESTOREFILE setting. 

2) "!" is now allowed in accounting rules.

3) Interface names appearing within the configuration are now
   verified. Interface names must match the name of an entry in
   /etc/shorewall/interfaces (or if bridging is enabled, they must
   match the name of an entry in /etc/shorewall/interfaces or the name
   of a bridge port appearing in /etc/shorewall/hosts).

4) A new 'rejNotSyn' built-in standard action has been added. This
   action responds to "New not SYN" packets with an RST.

   The 'dropNonSyn' action has been superceded by the new 'dropNotSyn'
   action. The old name will be accepted until the next major release
   of Shorewall but will generate a warning.

   Several new logging actions involving "New not SYN" packets have
   been added:

	logNewNotSyn  -- logs the packet with disposition = LOG
	dLogNewNotSyn -- logs the packet with disposition = DROP
	rLogNewNotSyn -- logs the packet with disposition = REJECT

   The packets are logged at the log level specified in the
   LOGNEWNOTSYN option in shorewall.conf. If than option is empty or
   not specified, then 'info' is assumed.

   Examples (In all cases, set NEWNOTSYN=Yes in shorewall.conf):

   A: To simulate the behavior of NEWNOTSYN=No:

      a) Add 'NoNewNotSyn' to /etc/shorewall/actions.
      b) Create /etc/shorewall/action.NoNewNotSyn containing:

	    dLogNotSyn
	    dropNotSyn

      c) Early in your rules file, place:

	 NoNewNotSyn   all   all     tcp

   B: Drop 'New not SYN' packets from the net only. Don't log them.

      a) Early in your rules file, place:

         dropNotSyn    net	  all	tcp

5) Slackware users no longer have to modify the install.sh script
   before installation. Tuomo Soini has provided a change that allows
   the INIT and FIREWALL variables to be specified outside the script
   as in:

      DEST=/etc/rc.d INIT=rc.firewall ./install.sh