#!/bin/sh
#
# Shorewall 3.2 -- /usr/share/shorewall/functions
#
#     This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
#     (c) 1999,2000,2001,2002,2003,2004,2005,2006 - Tom Eastep (teastep@shorewall.net)
#
#     tcstart from tc4shorewall       Version 0.5
#     (c) 2005 Arne Bernin <arne@ucbering.de>
#     Modified by Tom Eastep for integration into the Shorewall distribution
#     published under GPL Version 2#
#
#	Complete documentation is available at http://shorewall.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA

LIBVERSION=30191

[ -n "${VARDIR:=/var/lib/shorewall}" ]
[ -n "${SHAREDIR:=/usr/share/shorewall}" ]
[ -n "${CONFDIR:=/etc/shorewall}" ]

#
# Message to stderr
#
error_message() # $* = Error Message
{
   echo "   $@" >&2
}

# Function to truncate a string -- It uses 'cut -b -<n>'
# rather than ${v:first:last} because light-weight shells like ash and
# dash do not support that form of expansion.
#

truncate() # $1 = length
{
    cut -b -${1}
}

#
# Split a colon-separated list into a space-separated list
#
split() {
    local ifs=$IFS
    IFS=:
    set -- $1
    echo $*
    IFS=$ifs
}

#
# Search a list looking for a match -- returns zero if a match found
# 1 otherwise
#
list_search() # $1 = element to search for , $2-$n = list
{
    local e=$1

    while [ $# -gt 1 ]; do
	shift
	[ "x$e" = "x$1" ] && return 0
    done

    return 1
}

#
# Return a space separated list of values matching
#
list_walk() # $1 = element to search for, $2-$n = list
{
    local e=$1 result=

    while [ $# -gt 1 ]; do
	shift
	case $1 in
	    $e*)
	    	result="$result ${1##$e}"
		;;
	esac
    done
    echo $result
}

#
# Functions to count list elements
# - - - - - - - - - - - - - - - -
# Whitespace-separated list
#
list_count1() {
    echo $#
}
#
# Comma-separated list
#
list_count() {
    list_count1 $(separate_list $1)
}

#
# Conditionally produce message
#
progress_message() # $* = Message
{
    local timestamp=

    if [ $VERBOSE -gt 1 ]; then
	[ -n "$TIMESTAMP" ] && timestamp="$(date +%H:%M:%S) "
	echo "${timestamp}$@"
    fi
}

progress_message2() # $* = Message
{
    local timestamp=

    if [ $VERBOSE -gt 0 ]; then
	[ -n "$TIMESTAMP" ] && timestamp="$(date +%H:%M:%S) "
	echo "${timestamp}$@"
    fi
}

progress_message3() # $* = Message
{
    local timestamp=

    if [ $VERBOSE -ge 0 ]; then
	[ -n "$TIMESTAMP" ] && timestamp="$(date +%H:%M:%S) "
	echo "${timestamp}$@"
    fi
}

#
# Suppress all output for a command
#
qt()
{
    "$@" >/dev/null 2>&1
}

#
# Determine if Shorewall is "running"
#
shorewall_is_started() {
    qt $IPTABLES -L shorewall -n
}

#
# Perform variable substitution on the passed argument and echo the result
#
expand() # $@ = contents of variable which may be the name of another variable
{
    eval echo \"$@\"
}

#
# Perform variable substitition on the values of the passed list of variables
#
expandv() # $* = list of variable names
{
    local varval

    while [ $# -gt 0 ]; do
	eval varval=\$${1}
	eval $1=\"$varval\"
	shift
    done
}

#
# Add whitespace after "!"
#
fix_bang()
{
    local result=

    while [ $# -gt 0 ]; do
	case $1 in
	    !*)
		result="$result ! ${1#!}"
		;;
	    *)
		result="$result $1"
		;;
	esac
	shift
    done

    echo $result
}

#
# Echos the fully-qualified name of the calling shell program
#
my_pathname() {
    cd $(dirname $0)
    echo $PWD/$(basename $0)
}

#
# Set default config path
#
ensure_config_path() {
    local F=${SHAREDIR}/configpath
    if [ -z "$CONFIG_PATH" ]; then
	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
	. $F
    fi
}

#
# Find a File -- For relative file name, look first in $SHOREWALL_DIR then in ${CONFDIR}
#
find_file()
{
    local saveifs= directory

    case $1 in
	/*)
	    echo $1
	    ;;
	*)
	    if [ -n "$SHOREWALL_DIR" -a -f $SHOREWALL_DIR/$1 ]; then
		echo $SHOREWALL_DIR/$1
	    else
		saveifs=$IFS
		IFS=:
		for directory in $CONFIG_PATH; do
		    if [ -f $directory/$1 ]; then
			echo $directory/$1
			IFS=$saveifs
			return
		    fi
		done

		IFS=$saveifs

		echo ${CONFDIR}/$1
	    fi
	    ;;
    esac
}

#
# Get fully-qualified name of file
#
resolve_file() # $1 = file name
{
    local pwd=$PWD

    case $1 in
	/*)
	    echo $1
	    ;;
	./*)
	    echo ${pwd}${1#.}
	    ;;
	../*)
	    cd ..
	    echo ${PWD}${1#..}
	    cd $pwd
	    ;;
	*)
	    echo $pwd/$1
	    ;;
    esac
}

##
# Source a user exit file if it exists
#
run_user_exit() # $1 = file name
{
    local user_exit=$(find_file $1)

    if [ -f $user_exit ]; then
	progress_message "Processing $user_exit ..."
	. $user_exit
    fi
}

#
# Replace commas with spaces and echo the result
#
separate_list() {
    local list="$@"
    local part
    local newlist
    local firstpart
    local lastpart
    local enclosure

    case "$list" in
	*,|,*|*,,*|*[[:space:]]*)
	    #
	    # There's been whining about us not catching embedded white space in
	    # comma-separated lists. This is an attempt to snag some of the cases.
	    #
	    # The 'TERMINATOR' function will be set by the 'firewall' script to
	    # either 'startup_error' or 'fatal_error' depending on the command and
	    # command phase
	    #
            [ -n "$TERMINATOR" ] && \
		$TERMINATOR "Invalid comma-separated list \"$@\""
            echo "WARNING -- invalid comma-separated list \"$@\"" >&2
	    ;;
	*\[*\]*)
	    #
	    # Where we need to embed comma-separated lists within lists, we enclose them
	    # within square brackets (extra 'evals' are to keep my text editor (kate) from getting lost).
	    #
	    eval 'firstpart=${list%%\[*}'
	    eval 'lastpart=${list#*\[}'
	    eval 'enclosure=${lastpart%%\]*}'
	    eval 'lastpart=${lastpart#*\]}'
	    case $lastpart in
		\,*)
		    case $firstpart in
			*\,)
			    echo "$(separate_list ${firstpart%,}) [$enclosure] $(separate_list ${lastpart#,})"
			    ;;
			*)
			    echo "$(separate_list $firstpart)[$enclosure] $(separate_list ${lastpart#,})"
			    ;;
		    esac
		    ;;
		*)
		    case $firstpart in
			*\,)
			    echo "$(separate_list ${firstpart%,}) [$enclosure]$(separate_list $lastpart)"
			    ;;
			*)
			    echo "$(separate_list $firstpart)[$enclosure]$(separate_list $lastpart)"
			    ;;
		    esac
		    ;;
	    esac
	    return
	    ;;
    esac

    list="$@"
    part="${list%%,*}"
    newlist="$part"

    while [ "x$part" != "x$list" ]; do
	list="${list#*,}";
	part="${list%%,*}";
	newlist="$newlist $part";
    done

    echo "$newlist"
}

#
# Load a Kernel Module
#
loadmodule() # $1 = module name, $2 - * arguments
{
    local modulename=$1
    local modulefile
    local suffix
    moduleloader=modprobe

    if ! qt mywhich modprobe; then
	moduleloader=insmod
    fi

    if ! list_search $modulename $MODULES ; then
	shift

	for suffix in $MODULE_SUFFIX ; do
	    modulefile=$MODULESDIR/${modulename}.${suffix}

	    if [ -f $modulefile ]; then
		case $moduleloader in
		    insmod)
			insmod $modulefile $*
			;;
		    *)
			modprobe $modulename $*
			;;
		esac

		MODULES=$(lsmod | cut -d ' ' -f1)
		break
	    fi
	done
    fi
}

#
# Reload the Modules
#
reload_kernel_modules() {

    [ -z "$MODULESDIR" ] && MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
    MODULES=$(lsmod | cut -d ' ' -f1)

    while read command; do
	eval $command
    done

}

#
# Load kernel modules required for Shorewall
#
load_kernel_modules()
{
    save_modules_dir=$MODULESDIR

    [ -z "$MODULESDIR" ] && \
	MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv4/netfilter

    modules=$(find_file modules)

    if [ -f $modules -a -d $MODULESDIR ]; then
	MODULES=$(lsmod | cut -d ' ' -f1)
	progress_message "Loading Modules..."
	. $modules
    fi

    MODULESDIR=$save_modules_dir
}

#
# Call this function to assert MUTEX with Shorewall. If you invoke the
# /sbin/shorewall program while holding MUTEX, you should pass "nolock" as
# the first argument. Example "shorewall nolock refresh"
#
# This function uses the lockfile utility from procmail if it exists.
# Otherwise, it uses a somewhat race-prone algorithm to attempt to simulate the
# behavior of lockfile.
#
mutex_on()
{
    local try=0
    local lockf=${VARDIR}/lock

    MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}

    if [ $MUTEX_TIMEOUT -gt 0 ]; then

	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}

	if qt mywhich lockfile; then
	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf}
	else
	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
		sleep 1
		try=$((${try} + 1))
	    done

	    if  [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then
	        # Create the lockfile
		echo $$ > ${lockf}
	    else
		echo "Giving up on lock file ${lockf}" >&2
	    fi
	fi
    fi
}

#
# Call this function to release MUTEX
#
mutex_off()
{
    rm -f ${VARDIR}/lock
}

#
# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
#
#     None - No mktemp
#     BSD  - BSD mktemp (Mandrake)
#     STD  - mktemp.org mktemp
#
find_mktemp() {
    local mktemp=`mywhich mktemp 2> /dev/null`

    if [ -n "$mktemp" ]; then
	if qt mktemp -V ; then
	    MKTEMP=STD
	else
	    MKTEMP=BSD
	fi
    else
	MKTEMP=None
    fi
}

#
# create a temporary file. If a directory name is passed, the file will be created in
# that directory. Otherwise, it will be created in a temporary directory.
#
mktempfile() {

    [ -z "$MKTEMP" ] && find_mktemp

    if [ $# -gt 0 ]; then
	case "$MKTEMP" in
	    BSD)
		mktemp $1/shorewall.XXXXXX
		;;
	    STD)
		mktemp -p $1 shorewall.XXXXXX
		;;
	    None)
		> $1/shorewall-$$ && echo $1/shorewall-$$
		;;
	    *)
		error_message "ERROR:Internal error in mktempfile"
		;;
	esac
    else
	case "$MKTEMP" in
	    BSD)
		mktemp /tmp/shorewall.XXXXXX
		;;
	    STD)
		mktemp -t shorewall.XXXXXX
		;;
	    None)
		rm -f /tmp/shorewall-$$
		> /tmp/shorewall-$$ && echo /tmp/shorewall-$$
		;;
	    *)
		error_message "ERROR:Internal error in mktempfile"
		;;
	esac
    fi
}

#
# create a temporary directory
#
mktempdir() {

    [ -z "$MKTEMP" ] && find_mktemp

    case "$MKTEMP" in
	STD)
	    mktemp -td shorewall.XXXXXX
	    ;;
	None|BSD)
	    #
	    # Not all versions of the BSD mktemp support the -d option under Linux
	    #
	    qt rm -rf /tmp/shorewall-$$
	    mkdir -p /tmp/shorewall-$$ chmod 700 /tmp/shorewall-$$ && echo /tmp/shorewall-$$
	    ;;
	*)
	    error_message "ERROR:Internal error in mktempdir"
	    ;;
	esac
}

#
# Read a file and handle "INCLUDE" directives
#

read_file() # $1 = file name, $2 = nest count
{
    local first rest

    if [  -f $1 ]; then
	while read first rest; do
	    if [ "x$first"  = "xINCLUDE" ]; then
		if [ $2 -lt 4 ]; then
		    read_file $(find_file $(expand ${rest%#*})) $(($2 + 1))
		else
		    error_message "WARNING: INCLUDE in $1 ignored (nested too deeply)"
		fi
	    else
		echo "$first $rest"
	    fi
	done < $1
    else
	[ -n "$TERMINATOR" ] && $TERMINATOR "No such file: $1"
	echo "WARNING -- No such file: $1"
    fi
}

#
# Function for including one file into another
#
INCLUDE() {
    . $(find_file $(expand $@))
}

#
# Strip comments and blank lines from a file and place the result in the
# temporary directory
#
strip_file() # $1 = Base Name of the file, $2 = Full Name of File (optional)
{
    local fname

    [ $# = 1 ] && fname=$(find_file $1) || fname=$2

    if [ -f $fname ]; then
	read_file $fname 0 | cut -d'#' -f1 | grep -v '^[[:space:]]*$' > $TMP_DIR/$1
    else
	> $TMP_DIR/$1
    fi
}

#
#  Note: The following set of IP address manipulation functions have anomalous
#        behavior when the shell only supports 32-bit signed arithmatic and
#        the IP address is 128.0.0.0 or 128.0.0.1.
#

LEFTSHIFT='<<'


#
# Convert an IP address in dot quad format to an integer
#
decodeaddr() {
    local x
    local temp=0
    local ifs=$IFS

    IFS=.

    for x in $1; do
	temp=$(( $(( $temp $LEFTSHIFT 8 )) | $x ))
    done

    echo $temp

    IFS=$ifs
}

#
# convert an integer to dot quad format
#
encodeaddr() {
    addr=$1
    local x
    local y=$(($addr & 255))

    for x in 1 2 3 ; do
	addr=$(($addr >> 8))
	y=$(($addr & 255)).$y
    done

    echo $y
}

#
# Enumerate the members of an IP range -- When using a shell supporting only
# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
#
# Comes in two flavors:
#
# ip_range() - produces a mimimal list of network/host addresses that spans
#              the range.
#
# ip_range_explicit() - explicitly enumerates the range.
#
ip_range() {
    local first last l x y z vlsm

    case $1 in
	!*)
	    #
	    # Let iptables complain if it's a range
	    #
	    echo $1
	    return
	    ;;
	[0-9]*.*.*.*-*.*.*.*)
            ;;
	*)
	    echo $1
	    return
	    ;;
    esac

    first=$(decodeaddr ${1%-*})
    last=$(decodeaddr ${1#*-})

    if [ $first -gt $last ]; then
	fatal_error "Invalid IP address range: $1"
    fi

    l=$(( $last + 1 ))

    while [ $first -le $last ]; do
	vlsm=
	x=31
	y=2
	z=1

	while [ $(( $first % $y )) -eq 0 -a $(( $first + $y )) -le $l ]; do
	    vlsm=/$x
	    x=$(( $x - 1 ))
	    z=$y
	    y=$(( $y * 2 ))
	done

	echo $(encodeaddr $first)$vlsm
	first=$(($first + $z))
    done
}

ip_range_explicit() {
    local first last

    case $1 in
    [0-9]*.*.*.*-*.*.*.*)
	;;
    *)
	echo $1
	return
	;;
    esac

    first=$(decodeaddr ${1%-*})
    last=$(decodeaddr ${1#*-})

    if [ $first -gt $last ]; then
	fatal_error "Invalid IP address range: $1"
    fi

    while [ $first -le $last ]; do
	echo $(encodeaddr $first)
	first=$(($first + 1))
    done
}

#
# Netmask from CIDR
#
ip_netmask() {
    local vlsm=${1#*/}

    [ $vlsm -eq 0 ] && echo 0 || echo $(( -1 $LEFTSHIFT $(( 32 - $vlsm )) ))
}

#
# Network address from CIDR
#
ip_network() {
    local decodedaddr=$(decodeaddr ${1%/*})
    local netmask=$(ip_netmask $1)

    echo $(encodeaddr $(($decodedaddr & $netmask)))
}

#
# The following hack is supplied to compensate for the fact that many of
# the popular light-weight Bourne shell derivatives don't support XOR ("^").
#

ip_broadcast() {
    local x=$(( 32 - ${1#*/} ))

    [ $x -eq 0 ] && echo -1 || echo $(( $(( 1 $LEFTSHIFT $x )) - 1 ))
}

#
# Calculate broadcast address from CIDR
#
broadcastaddress() {
    local decodedaddr=$(decodeaddr ${1%/*})
    local netmask=$(ip_netmask $1)
    local broadcast=$(ip_broadcast $1)

    echo $(encodeaddr $(( $(($decodedaddr & $netmask)) | $broadcast )))
}

#
# Test for network membership
#
in_network() # $1 = IP address, $2 = CIDR network
{
    local netmask=$(ip_netmask $2)

    test $(( $(decodeaddr $1) & $netmask)) -eq $(( $(decodeaddr ${2%/*}) & $netmask ))
}

#
# Netmask to VLSM
#
ip_vlsm() {
    local mask=$(decodeaddr $1)
    local vlsm=0
    local x=$(( 128 << 24 )) # 0x80000000

    while [ $(( $x & $mask )) -ne 0 ]; do
	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
	vlsm=$(($vlsm + 1))
    done

    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
	echo "Invalid net mask: $1" >&2
    else
	echo $vlsm
    fi
}


#
# Chain name base for an interface -- replace all periods with underscores in the passed name.
#                                     The result is echoed (less trailing "+").
#
chain_base() #$1 = interface
{
    local c=${1%%+}

    while true; do
	case $c in
	    *.*)
		c="${c%.*}_${c##*.}"
		;;
	    *-*)
		c="${c%-*}_${c##*-}"
		;;
	    *%*)
		c="${c%\%*}_${c##*%}"
		;;
	    *)
		echo ${c:=common}
		return
		;;
	esac
    done
}

#
# Loosly Match the name of an interface
#

if_match() # $1 = Name in interfaces file - may end in "+"
           # $2 = Full interface name - may also end in "+"
{
    local pattern=${1%+}

    case $1 in
	*+)
	    test  "x$(echo $2 | truncate ${#pattern} )" = "x${pattern}"
	    ;;
	*)
	    test "x$1" = "x$2"
	    ;;
    esac
}

#
# Source IP range
#
source_ip_range() # $1 = Address or Address Range
{
    [ $# -gt 0 ] && case $1 in
	*.*.*.*-*.*.*.*)
	    case $1 in
		!*)
		    iprange_echo "! --src-range ${1#!}"
		    ;;
		*)
		    iprange_echo "--src-range $1"
		    ;;
	    esac
	    ;;
	!+*)
	    echo "-m set ! $(get_set_flags ${1#!} src)"
	    ;;
	+*)
	    echo "-m set $(get_set_flags $1 src)"
	    ;;
	*)
	    echo "-s $1"
	    ;;
    esac
}

#
# Destination IP range
#
dest_ip_range() # $1 = Address or Address Range
{
    [ $# -gt 0 ] && case $1 in
	*.*.*.*-*.*.*.*)
	    case $1 in
		!*)
		    iprange_echo "! --dst-range ${1#!}"
		    ;;
		*)
		    iprange_echo "--dst-range $1"
		    ;;
	    esac
	    ;;
	!+*)
	    echo "-m set ! $(get_set_flags ${1#!} dst)"
	    ;;
	+*)
	    echo "-m set $(get_set_flags $1 dst)"
	    ;;
	*)
	    echo "-d $1"
	    ;;
    esac
}

both_ip_ranges() # $1 = Source address or range, $2 = dest address or range
{
    local rangeprefix= setprefix= rangematch= setmatch=

    case $1 in
	*.*.*.*-*.*.*.*)
	    rangeprefix="-m iprange"
	    rangematch="--src-range $1"
	    ;;
	!+*)
	    setprefix="-m set"
	    setmatch="! $(get_set_flags ${1#!} src)"
	    ;;
	+*)
	    setprefix="-m set"
	    setmatch="$(get_set_flags $1 src)"
	    ;;
	*)
	    rangematch="-s $1"
	    ;;
    esac

    case $2 in
	*.*.*.*-*.*.*.*)
	    rangeprefix="-m iprange"
	    rangematch="$rangematch --dst-range $2"
	    ;;
	!+*)
	    setprefix="-m set"
	    match="$setmatch ! $(get_set_flags ${2#!} dst)"
	    ;;
	+*)
	    setprefix="-m set"
	    setmatch="$setmatch $(get_set_flags $2 dst)"
	    ;;
	*)
	    rangematch="$rangematch -d $2"
	    ;;
    esac

    echo "$rangeprefix $rangematch $setprefix $setmatch"
}

#
# Find the value 'dev' in the passed arguments then echo the next value
#

find_device() {
    while [ $# -gt 1 ]; do
	[ "x$1" = xdev ] && echo $2 && return
	shift
    done
}

#
# Find the value 'via' in the passed arguments then echo the next value
#

find_gateway() {
    while [ $# -gt 1 ]; do
	[ "x$1" = xvia ] && echo $2 && return
	shift
    done
}

#
# Find the value 'mtu' in the passed arguments then echo the next value
#

find_mtu() {
    while [ $# -gt 1 ]; do
	[ "x$1" = xmtu ] && echo $2 && return
	shift
    done
}

#
# Find the value 'peer' in the passed arguments then echo the next value up to
# "/"
#

find_peer() {
    while [ $# -gt 1 ]; do
	[ "x$1" = xpeer ] && echo ${2%/*} && return
	shift
    done
}

#
# Find the interfaces that have a route to the passed address - the default
# route is not used.
#

find_rt_interface() {
    ip route ls | while read addr rest; do
	case $addr in
	    */*)
		in_network ${1%/*} $addr && echo $(find_device $rest)
		;;
	    default)
		;;
	    *)
		if [ "$addr" = "$1" -o "$addr/32" = "$1" ]; then
		    echo $(find_device $rest)
		fi
		;;
	esac
    done
}

#
# Try to find the gateway through an interface looking for 'nexthop'

find_nexthop() # $1 = interface
{
    echo $(find_gateway `ip route ls | grep "[[:space:]]nexthop.* $1"`)
}

#
# Find the default route's interface
#
find_default_interface() {
    ip route ls | while read first rest; do
	[ "$first" = default ] && echo $(find_device $rest) && return
    done
}

#
# Echo the name of the interface(s) that will be used to send to the
# passed address
#

find_interface_by_address() {
    local dev="$(find_rt_interface $1)"
    local first rest

    [ -z "$dev" ] && dev=$(find_default_interface)

    [ -n "$dev" ] && echo $dev
}

#
# Find the interface with the passed MAC address
#

find_interface_by_mac() {
    local mac=$1 first second rest dev

    ip link ls | while read first second rest; do
	case $first in
	    *:)
                dev=$second
		;;
	    *)
	        if [ "$second" = $mac ]; then
		    echo ${dev%:}
		    return
		fi
	esac
    done
}

#
# Find interface address--returns the first IP address assigned to the passed
# device
#
find_first_interface_address() # $1 = interface
{
    #
    # get the line of output containing the first IP address
    #
    addr=$(ip -f inet addr show $1 2> /dev/null | grep 'inet .* global' | head -n1)
    #
    # If there wasn't one, bail out now
    #
    [ -n "$addr" ] || fatal_error "Can't determine the IP address of $1"
    #
    # Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
    # along with everything else on the line
    #
    echo $addr | sed 's/inet //;s/\/.*//;s/ peer.*//'
}

find_first_interface_address_if_any() # $1 = interface
{
    #
    # get the line of output containing the first IP address
    #
    addr=$(ip -f inet addr show $1 2> /dev/null | grep 'inet .* global' | head -n1)
    #
    # Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
    # along with everything else on the line
    #
    [ -n "$addr" ] && echo $addr | sed 's/inet //;s/\/.*//;s/ peer.*//' || echo 0.0.0.0
}

#
# Find interface addresses--returns the set of addresses assigned to the passed
# device
#
find_interface_addresses() # $1 = interface
{
    ip -f inet addr show $1 | grep inet\  | sed 's/inet //;s/\/.*//;s/ peer.*//'
}

#
#  echo the list of networks routed out of a given interface
#
get_routed_networks() # $1 = interface name
{
    local address
    local rest

    ip route show dev $1 2> /dev/null |
	while read address rest; do
	    if [ "x$address" = xdefault ]; then
		error_message "WARNING: default route ignored on interface $1"
	    else
		[ "$address" = "${address%/*}" ] && address="${address}/32"
		echo $address
	    fi
        done
}

#
# Internal version of 'which'
#
mywhich() {
    local dir

    for dir in $(split $PATH); do
	if [ -x $dir/$1 ]; then
	    echo $dir/$1
	    return 0
	fi
    done

    return 2
}

#
# Set the Shorewall state
#
set_state () # $1 = state
{
    echo "$1 ($(date))" > ${VARDIR}/state
}

#
# Determine which optional facilities are supported by iptables/netfilter
#
determine_capabilities() {
    qt $IPTABLES -t nat    -L -n && NAT_ENABLED=Yes    || NAT_ENABLED=
    qt $IPTABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED=

    CONNTRACK_MATCH=
    MULTIPORT=
    XMULTIPORT=
    POLICY_MATCH=
    PHYSDEV_MATCH=
    IPRANGE_MATCH=
    RECENT_MATCH=
    OWNER_MATCH=
    IPSET_MATCH=
    CONNMARK=
    XCONNMARK=
    CONNMARK_MATCH=
    XCONNMARK_MATCH=
    RAW_TABLE=
    IPP2P_MATCH=
    LENGTH_MATCH=
    CLASSIFY_TARGET=
    ENHANCED_REJECT=
    USEPKTTYPE=
    KLUDGEFREE=
    MARK=
    XMARK=
    MANGLE_FORWARD=

    qt $IPTABLES -N fooX1234
    qt $IPTABLES -A fooX1234 -m conntrack --ctorigdst 192.168.1.1 -j ACCEPT             && CONNTRACK_MATCH=Yes
    qt $IPTABLES -A fooX1234 -p tcp -m multiport --dports 21,22 -j ACCEPT               && MULTIPORT=Yes
    qt $IPTABLES -A fooX1234 -p tcp -m multiport --dports 21:22 -j ACCEPT               && XMULTIPORT=Yes
    qt $IPTABLES -A fooX1234 -m policy --pol ipsec --mode tunnel --dir in -j ACCEPT     && POLICY_MATCH=Yes

    if qt $IPTABLES -A fooX1234 -m physdev --physdev-in eth0 -j ACCEPT; then
	PHYSDEV_MATCH=Yes
	qt $IPTABLES -A fooX1234 -m physdev --physdev-in eth1 -m physdev --physdev-out eth1 -j ACCEPT && KLUDGEFREE=Yes
    fi

    if qt $IPTABLES -A fooX1234 -m iprange --src-range 192.168.1.5-192.168.1.124 -j ACCEPT; then
	IPRANGE_MATCH=Yes
	if [ -z "${KLUDGEFREE}${PHYSDEV_MATCH}" ]; then
	    qt $IPTABLES -A fooX1234 -m iprange --src-range 192.168.1.5-192.168.1.124 -m iprange --dst-range 192.168.1.5-192.168.1.124 -j ACCEPT && KLUDGEFREE=Yes
	fi
    fi

    qt $IPTABLES -A fooX1234 -m recent --update -j ACCEPT     && RECENT_MATCH=Yes
    qt $IPTABLES -A fooX1234 -m owner --uid-owner 0 -j ACCEPT && OWNER_MATCH=Yes

    if qt $IPTABLES -A fooX1234 -m connmark --mark 2  -j ACCEPT; then
	CONNMARK_MATCH=Yes
	qt $IPTABLES -A fooX1234 -m connmark --mark 2/0xFF -j ACCEPT && XCONNMARK_MATCH=Yes
    fi

    qt $IPTABLES -A fooX1234 -p tcp -m ipp2p --ipp2p -j ACCEPT            && IPP2P_MATCH=Yes
    qt $IPTABLES -A fooX1234 -m length --length 10:20 -j ACCEPT           && LENGTH_MATCH=Yes
    qt $IPTABLES -A fooX1234 -j REJECT --reject-with icmp-host-prohibited && ENHANCED_REJECT=Yes

    if [ -n "$MANGLE_ENABLED" ]; then
	qt $IPTABLES -t mangle -N fooX1234

	if qt $IPTABLES -t mangle -A fooX1234 -j MARK --set-mark 1; then
	    MARK=Yes
	    qt $IPTABLES -t mangle -A fooX1234 -j MARK --and-mark 0xFF && XMARK=Yes
	fi

	if qt $IPTABLES -t mangle -A fooX1234 -j CONNMARK --save-mark; then
	    CONNMARK=Yes
	    qt $IPTABLES -t mangle -A fooX1234 -j CONNMARK --save-mark --mask 0xFF && XCONNMARK=Yes
	fi

	qt $IPTABLES -t mangle -A fooX1234 -j CLASSIFY --set-class 1:1 && CLASSIFY_TARGET=Yes
	qt $IPTABLES -t mangle -F fooX1234
	qt $IPTABLES -t mangle -X fooX1234
	qt $IPTABLES -t mangle -L FORWARD -n && MANGLE_FORWARD=Yes
    fi

    qt $IPTABLES -t raw	   -L -n && RAW_TABLE=Yes

    if qt mywhich ipset; then
	qt ipset -X fooX1234 # Just in case something went wrong the last time

	if qt ipset -N fooX1234 iphash ; then
	    if qt $IPTABLES -A fooX1234 -m set --set fooX1234 src -j ACCEPT; then
		qt $IPTABLES -D fooX1234 -m set --set fooX1234 src -j ACCEPT
		IPSET_MATCH=Yes
	    fi
	    qt ipset -X fooX1234
	fi
    fi

    qt $IPTABLES -A fooX1234 -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes

    qt $IPTABLES -F fooX1234
    qt $IPTABLES -X fooX1234
}

report_capability() # $1 = Capability Description , $2 Capability Setting (if any)
{
    local setting=

    [ "x$2" = "xYes" ] && setting="Available" || setting="Not available"

    echo "  " $1: $setting
}

report_capabilities() {
    if [ $VERBOSE -gt 1 ]; then
	echo "Shorewall has detected the following iptables/netfilter capabilities:"
	report_capability "NAT" $NAT_ENABLED
	report_capability "Packet Mangling" $MANGLE_ENABLED
	report_capability "Multi-port Match" $MULTIPORT
	[ -n "$MULTIPORT" ] && report_capability "Extended Multi-port Match" $XMULTIPORT
	report_capability "Connection Tracking Match" $CONNTRACK_MATCH
	report_capability "Packet Type Match" $USEPKTTYPE
	report_capability "Policy Match" $POLICY_MATCH
	report_capability "Physdev Match" $PHYSDEV_MATCH
	report_capability "Packet length Match" $LENGTH_MATCH
	report_capability "IP range Match" $IPRANGE_MATCH
	report_capability "Recent Match" $RECENT_MATCH
	report_capability "Owner Match" $OWNER_MATCH
	report_capability "Ipset Match" $IPSET_MATCH
	report_capability "CONNMARK Target" $CONNMARK
	[ -n "$CONNMARK" ] && report_capability "Extended CONNMARK Target" $XCONNMARK
	report_capability "Connmark Match" $CONNMARK_MATCH
	[ -n "$CONNMARK_MATCH" ] && report_capability "Extended Connmark Match" $XCONNMARK_MATCH
	report_capability "Raw Table" $RAW_TABLE
	report_capability "IPP2P Match" $IPP2P_MATCH
	report_capability "CLASSIFY Target" $CLASSIFY_TARGET
	report_capability "Extended REJECT" $ENHANCED_REJECT
	report_capability "Repeat match" $KLUDGEFREE
	report_capability "MARK Target" $MARK
	[ -n "$MARK" ] && report_capability "Extended MARK Target" $XMARK
	report_capability "Mangle FORWARD Chain" $MANGLE_FORWARD
    fi

    [ -n "$PKTTYPE" ] || USEPKTTYPE=

}


#
# Delete IP address
#
del_ip_addr() # $1 = address, $2 = interface
{
    [ $(find_first_interface_address_if_any $2) = $1 ] || qt ip addr del $1 dev $2
}

# Add IP Aliases
#
add_ip_aliases() # $* = List of addresses
{
    local addresses external interface inet cidr rest val arping=$(mywhich arping)

    address_details()
    {
	#
	# Folks feel uneasy if they don't see all of the same
	# decoration on these IP addresses that they see when their
	# distro's net config tool adds them. In an attempt to reduce
	# the anxiety level, we have the following code which sets
	# the VLSM and BRD from an existing address in the same networks
	#
	# Get all of the lines that contain inet addresses with broadcast
	#
	ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | while read inet cidr rest ; do
	    case $cidr in
		*/*)
		    if in_network $external $cidr; then
			echo "/${cidr#*/} brd $(broadcastaddress $cidr)"
			break
		    fi
		    ;;
	    esac
	done
    }

    do_one()
    {
	val=$(address_details)

	ip addr add ${external}${val} dev $interface $label
	[ -n "$arping" ] && qt $arping -U -c 2 -I $interface $external
	echo "$external $interface" >> $STATEDIR/nat
	[ -n "$label" ] && label="with $label"
	progress_message "   IP Address $external added to interface $interface $label"
    }

    progress_message "Adding IP Addresses..."

    while [ $# -gt 0 ]; do
	external=$1
	interface=$2
	label=

	if [ "$interface" != "${interface%:*}" ]; then
	    label="${interface#*:}"
	    interface="${interface%:*}"
	    label="label $interface:$label"
	fi

	shift 2

	list_search $external $(find_interface_addresses $interface) || do_one
    done
}

detect_gateway() # $1 = interface
{
    local interface=$1
    #
    # First assume that this is some sort of point-to-point interface
    #
    gateway=$( find_peer $(ip addr ls $interface ) )
    #
    # Maybe there's a default route through this gateway already
    #
    [ -n "$gateway" ] || gateway=$(find_gateway $(ip route ls dev $interface))
    #
    # Last hope -- is there a load-balancing route through the interface?
    #
    [ -n "$gateway" ] || gateway=$(find_nexthop $interface)
    #
    # Be sure we found one
    #
    [ -n "$gateway" ] && echo $gateway
}

#
# Disable IPV6
#
disable_ipv6() {
    local foo="$(ip -f inet6 addr ls 2> /dev/null)"

    if [ -n "$foo" ]; then
	if qt mywhich ip6tables; then
	    ip6tables -P FORWARD DROP
	    ip6tables -P INPUT DROP
	    ip6tables -P OUTPUT DROP
	    ip6tables -F
	    ip6tables -X
	    ip6tables -A OUTPUT -o lo -j ACCEPT
	    ip6tables -A INPUT -i lo -j ACCEPT
	else
	    error_message "WARNING: DISABLE_IPV6=Yes in shorewall.conf but this system does not appear to have ip6tables"
	fi
    fi
}

#
# Add a logging rule.
#
log_rule_limit() # $1 = log level, $2 = chain, $3 = display Chain $4 = disposition , $5 = rate limit $6=log tag $7=command $... = predicates for the rule
{
    local level=$1
    local chain=$2
    local displayChain=$3
    local disposition=$4
    local rulenum=
    local limit=
    local tag=${6:+$6 }
    local command=${7:--A}
    local prefix
    local base=$(chain_base $displayChain)

    limit="${5:-$LOGLIMIT}"

    shift 7

    if [ -n "$tag" -a -n "$LOGTAGONLY" ]; then
	displayChain=$tag
	tag=
    fi

    if [ -n "$LOGRULENUMBERS" ]; then
	eval rulenum=\$${base}_logrules

	rulenum=${rulenum:-1}

	prefix="$(printf "$LOGFORMAT" $displayChain $rulenum $disposition)${tag}"

	rulenum=$(($rulenum + 1))
	eval ${base}_logrules=$rulenum
    else
	prefix="$(printf "$LOGFORMAT" $displayChain $disposition)${tag}"
    fi

    if [ ${#prefix} -gt 29 ]; then
	prefix="$(echo $prefix | truncate 29)"
	error_message "WARNING: Log Prefix shortened to \"$prefix\""
    fi

    case $level in
	ULOG)
	    run_iptables $command $chain $@ $limit -j ULOG $LOGPARMS --ulog-prefix \"$prefix\"
	    ;;
	*)
	    run_iptables $command $chain $@ $limit -j LOG $LOGPARMS --log-level $level --log-prefix \"$prefix\"
	    ;;
    esac

    if [ $? -ne 0 ] ; then
	[ -z "$STOPPING" ] && { stop_firewall; exit 2; }
    fi
}

log_rule() # $1 = log level, $2 = chain, $3 = disposition , $... = predicates for the rule
{
    local level=$1
    local chain=$2
    local disposition=$3

    shift 3

    log_rule_limit $level $chain $chain $disposition "$LOGLIMIT" "" -A $@
}

#
# Check that a mark value or mask is less that 256 or that it is less than 65536 and
# that it's lower 8 bits are zero.
#
verify_mark() # $1 = value to test
{
    verify_mark2()
    {
	case $1 in
	    0*)
		[ $(($1)) -lt 256 ] && return 0
		[ -n "$HIGH_ROUTE_MARKS" ] || return 1
		[ $(($1)) -gt 65535 ] && return 1
		return $(($1 & 0xFF))
		;;
	    [1-9]*)
		[ $1 -lt 256 ] && return 0
		[ -n "$HIGH_ROUTE_MARKS" ] || return 1
		[ $1 -gt 65535 ] && return 1
		return $(($1 & 0xFF))
		;;
	    *)
		return 2
		;;
	esac
    }

    verify_mark2 $1 || fatal_error "Invalid Mark or Mask value: $1"
}

#
# Detect a device's MTU
#
get_device_mtu() # $1 = device
{
    local output="$(ip link ls dev $1 2> /dev/null)" # quotes required for /bin/ash

    if [ -n "$output" ]; then
	echo $(find_mtu $output)
    else
	echo 1500
    fi
}

#
# Arne Bernin's 'tc4shorewall'
#
setup_traffic_shaping()
{
    local mtu r2q tc_all_devices device mark rate ceil prio options devfile=$(find_file tcdevices) classfile=$(find_file tcclasses) devnum=1 last_device=
    r2q=10

    rate_to_kbit() {
	local rateunit rate
	rate=$1
	rateunit=$( echo $rate | sed -e 's/[0-9]*//')
	rate=$( echo $rate | sed -e 's/[a-z]*//g')

	case $rateunit in
	    kbit)
		rate=$rate
		;;
	    mbit)
		rate=$(expr $rate \* 1024)
		;;
	    mbps)
		rate=$(expr $rate \* 8192)
		;;
	    kbps)
		rate=$(expr $rate \* 8)
		;;
	    *)
		rate=$(expr $rate / 128)
		;;
	esac
	echo $rate
    }

    calculate_quantum() {
	local rate=$(rate_to_kbit $1)
	echo $(( $rate * ( 128 / $r2q ) ))
    }

    # get given outbandwidth for device
    get_outband_for_dev() {
	local device inband outband
	while read device inband outband; do
	    expandv device inband outband
	    tcdev="$device $inband $outband"
	    if [ "$1" = "$device" ] ; then
		echo $outband
		return
	    fi
	done < $TMP_DIR/tcdevices
    }

    check_tcclasses_options() {
	while [ $# -gt 1 ]; do
	    shift
	    case $1 in
		default|tcp-ack|tos-minimize-delay|tos-maximize-throughput|tos-maximize-reliability|tos-minimize-cost|tos-normal-service)
		    ;;
		tos=0x[0-9a-f][0-9a-f]|tos=0x[0-9a-f][0-9a-f]/0x[0-9a-f][0-9a-f])
		    ;;
		*)
		    echo $1
		    return 1
		    ;;
	    esac
	done
	return 0
    }

    get_defmark_for_dev() {
	local searchdev searchmark device ceil prio options
	searchdev=$1

	while read device mark rate ceil prio options; do
	    expandv device mark rate ceil prio options
	    options=$(separate_list $options | tr '[A-Z]' '[a-z]')
	    tcdev="$device $mark $rate $ceil $prio $options"
	    if [ "$searchdev" = "$device" ] ; then
		list_search "default" $options && echo $mark &&return 0
	    fi
	done < $TMP_DIR/tcclasses

	return 1
    }

    check_defmark_for_dev() {
	get_defmark_for_dev $1 >/dev/null
    }

    validate_tcdevices_file() {
	progress_message2 "Validating $devfile..."
	local device local device inband outband
	while read device inband outband; do
	    expandv device inband outband
	    tcdev="$device $inband $outband"
	    check_defmark_for_dev $device || fatal_error "Option default is not defined for any class in tcclasses for interface $device"
	    case $interface in
		*:*|+)
		    fatal_error "Invalid Interface Name: $interface"
		    ;;
	    esac
	    list_search $device $devices && fatal_error "Interface $device is defined more than once in tcdevices"
	    tc_all_devices="$tc_all_devices $device"
	done < $TMP_DIR/tcdevices
    }

    validate_tcclasses_file() {
	progress_message2 "Validating $classfile..."
	local classlist device mark rate ceil prio bandw wrongopt allopts opt
	allopts=""
	while read device mark rate ceil prio options; do
	    expandv device mark rate ceil prio options
	    tcdev="$device $mark $rate $ceil $prio $options"
	    ratew=$(get_outband_for_dev $device)
	    options=$(separate_list $options | tr '[A-Z]' '[a-z]')
	    for opt in $options; do
	    	case $opt in
	    	tos=0x??)
	    	    opt="$opt/0xff"
	    	    ;;
		esac
		    list_search "$device-$opt" $allopts && fatal_error "option $opt already defined in a chain for interface $device in tcclasses"
		    allopts="$allopts $device-$opt"
	    done
	    wrongopt=$(check_tcclasses_options $options) || fatal_error "unknown option $wrongopt for class iface $device mark $mark in tcclasses file"
	    if [ -z "$ratew" ] ; then
		fatal_error "device $device seems not to be configured in tcdevices"
	    fi
	    list_search "$device-$mark" $classlist && fatal_error "Mark $mark for interface $device defined more than once in tcclasses"
	    #
	    # Convert HEX/OCTAL mark representation to decimal
	    #
	    mark=$(($mark))
	    verify_mark $mark
	    [ $mark -lt 256 ] || fatal_error "Invalid Mark Value"
	    classlist="$classlist $device-$mark"
	done < $TMP_DIR/tcclasses
    }

    add_root_tc() {
	local defmark dev indent

	dev=$(chain_base $device)

	if [ $COMMAND = compile ]; then
	    save_command "if qt ip link ls dev $device; then"
	    indent="$INDENT"
	    INDENT="$INDENT    "
	    save_command ${dev}_exists=Yes
	    save_command qt tc qdisc del dev $device root
	    save_command qt tc qdisc del dev $device ingress
	elif ! qt ip link ls dev $device; then
	    error_message "WARNING: Device $device not found -- traffic-shaping configuration skipped"
	    return 1
	fi

	defmark=$(get_defmark_for_dev $device)

	run_tc qdisc add dev $device root handle $devnum: htb default 1$defmark

	if [ $COMMAND = compile ]; then
	    save_command "${dev}_mtu=\$(get_device_mtu $device)"
	    run_tc "class add dev $device parent $devnum: classid $devnum:1 htb rate $outband mtu \$${dev}_mtu"
	else
	    run_tc class add dev $device parent $devnum: classid $devnum:1 htb rate $outband mtu $(get_device_mtu $device)
	fi

	run_tc qdisc add dev $device handle ffff: ingress
	run_tc filter add dev $device parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate ${inband} burst 10k drop flowid :1
	eval ${dev}_devnum=$devnum
	devnum=$(($devnum + 1))

	if [ $COMMAND = compile ]; then
	    save_progress_message_short "   TC Device $tcdev defined."
	    INDENT="$indent"
	    save_command else
	    INDENT="$INDENT    "
	    save_command error_message "\"WARNING: Device $device not found -- traffic-shaping configuration skipped\""
	    save_command "${dev}_exists="
	    INDENT="$indent"
	    save_command "fi"
	    save_command
	fi

	return 0
    }

    add_tc_class() {
	local full classid tospair tosmask quantum indent

	dev=$(chain_base $device)

	if [ $COMMAND = compile ]; then
	    save_command "if [ -n \"\$${dev}_exists\" ] ; then"
	    indent="$INDENT"
	    INDENT="$INDENT    "
	else
	    qt ip link ls dev $device || return 1
	fi

	full=$(get_outband_for_dev $device)
	full=$(rate_to_kbit $full)

	if [ -z "$prio" ] ; then
	    prio=1
	fi

	case $rate in
	    *full*)
		rate=$(echo $rate | sed -e "s/full/$full/")
		rate="$(($rate))kbit"
		;;
	esac

	case $ceil in
	    *full*)
		ceil=$(echo $ceil | sed -e "s/full/$full/")
		ceil="$(($ceil))kbit"
		;;
	esac

	eval devnum=\$${dev}_devnum
	#
	# Convert HEX/OCTAL mark representation to decimal
	#
	mark=$(($mark))

	classid=$devnum:1$mark

	[ -n "$devnum" ] || fatal_error "Device $device not defined in $devfile"

	quantum=$(calculate_quantum $rate)

	if [ $COMMAND = compile ]; then
	    save_command "[ \$${dev}_mtu -gt $quantum ] && quantum=\$${dev}_mtu || quantum=$quantum"
	    run_tc "class add dev $device parent $devnum:1 classid $classid htb rate $rate ceil $ceil prio $prio mtu \$${dev}_mtu quantum \$quantum"
	else
	    [ "$last_device" = $device ] || mtu=$(get_device_mtu $device)
	    [ $mtu -gt $quantum ] && quantum=$mtu
	    run_tc class add dev $device parent $devnum:1 classid $classid htb rate $rate ceil $ceil prio $prio mtu $mtu quantum $quantum
	fi

	run_tc qdisc add dev $device parent $classid handle 1$mark: sfq perturb 10
	# add filters
	if [ -n "$CLASSIFY_TARGET" ]; then
	    run_iptables -t mangle -A tcpost $(match_dest_dev $device) -m mark --mark $mark/0xFF -j CLASSIFY --set-class $classid
	else
	    run_tc filter add dev $device protocol ip parent $devnum:0 prio 1 handle $mark fw classid $classid
	fi
	#options
	list_search "tcp-ack" $options && run_tc filter add dev $device parent $devnum:0 protocol ip prio 10 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid $classid
 	list_search "tos-minimize-delay" $options       && options="$options tos=0x10/0x10"
 	list_search "tos-maximize-throughput" $options  && options="$options tos=0x08/0x08"
 	list_search "tos-maximize-reliability" $options && options="$options tos=0x04/0x04"
 	list_search "tos-minimize-cost" $options        && options="$options tos=0x02/0x02"
 	list_search "tos-normal-service" $options       && options="$options tos=0x00/0x1e"

	for tospair in $(list_walk "tos=" $options) ; do
	    case $tospair in
	    	*/*)
		    tosmask=${tospair##*/}
		    ;;
		*)
		    tosmask=0xff
		    ;;
	    esac
	    run_tc filter add dev $device parent $devnum:0 protocol ip prio 10 u32 match ip tos ${tospair%%/*} $tosmask flowid $classid
	done

	if [ $COMMAND = compile ]; then
	    save_progress_message_short "   TC Class $tcdev defined."
	    INDENT="$indent"
	    save_command fi
	    save_command
	fi

	return 0
    }

    strip_file tcdevices $devfile
    strip_file tcclasses $classfile

    validate_tcdevices_file
    validate_tcclasses_file

    if [ -s $TMP_DIR/tcdevices ]; then
	[ $COMMAND = compile ] && save_progress_message "Setting up Traffic Control..."
	progress_message2 "$DOING $devfile..."

	while read device inband outband; do
	    expandv device inband outband
	    tcdev="$device $inband $outband"
	    add_root_tc && progress_message "   TC Device $tcdev defined."
	done < $TMP_DIR/tcdevices
    fi

    if [ -s $TMP_DIR/tcclasses ]; then
	progress_message2 "$DOING $classfile..."

	while read device mark rate ceil prio options; do
	    expandv device mark rate ceil prio options
	    tcdev="$device $mark $rate $ceil $prio $options"
	    options=$(separate_list $options | tr '[A-Z]' '[a-z]')
	    add_tc_class && progress_message "   TC Class $tcdev defined."
	    last_device=$device
	done < $TMP_DIR/tcclasses
    fi
}

#
# Process a TC Rule - $MARKING_CHAIN is assumed to contain the name of the
#                     default marking chain
#
process_tc_rule()
{
    local did_connmark=

    chain=$MARKING_CHAIN  target="MARK --set-mark" marktest=

    verify_designator() {
	[ "$chain" = tcout ] && \
	    fatal_error "Chain designator not allowed when source is \$FW; rule \"$rule\""
	chain=$1
	mark="${mark%:*}"
    }

    do_ipp2p()
    {
	[ -n "$IPP2P_MATCH" ] || fatal_error "Your kernel and/or iptables does not have IPP2P match support. Rule: \"$rule\""
	[ "x$port" = "x-" ] && port="ipp2p"

	case $proto in
	    *:*)
		proto=${proto#*:}
		;;
	    *)
		proto=tcp
		;;
	esac

	r="${r}-p $proto -m ipp2p --${port} "
    }

    verify_small_mark()
    {
	verify_mark $1
	[ $(($1)) -lt 256 ] || fatal_error "Mark Value ($1) too larg, rule \"$rule\""
    }

    do_connmark()
    {
	target="CONNMARK --set-mark"
	mark=$mark/0xff
	did_connmark=Yes
    }

    validate_mark()
    {
	case $1 in
	    */*)
		verify_mark ${1%/*}
		verify_mark ${1#*/}
		;;
	    *)
		verify_mark $1
		;;
	esac
    }

   add_a_tc_rule() {
	r=

	if [ "x$source" != "x-"	 ]; then
	    case $source in
		$FW:*)
		    [ $chain = tcpost ] || chain=tcout
		    r="$(source_ip_range ${source#*:}) "
		    ;;
		*:*)
		    interface=${source%:*}
		    verify_interface $interface || fatal_error "Unknown interface $interface in rule \"$rule\""
		    r="$(match_source_dev $interface) $(source_ip_range ${source#*:}) "
		    ;;
		*.*.*|+*|!+*)
		    r="$(source_ip_range $source) "
		    ;;
		~*|!~*)
		    r="$(mac_match $source) "
		    ;;
		$FW)
		    [ $chain = tcpost ] || chain=tcout
		    ;;
		*)
		    verify_interface $source || fatal_error "Unknown interface $source in rule \"$rule\""
		    r="$(match_source_dev $source) "
		    ;;
	    esac
	fi

	if [ "x${user:--}" != "x-" ]; then

	    [ "$chain" != tcout ] && \
		fatal_error "Invalid use of a user/group: rule \"$rule\""

	    r="$r-m owner"

	    case "$user" in
		*+*)
		    r="$r --cmd-owner ${user#*+} "
		    user=${user%+*}
		    ;;
	    esac

	    case "$user" in
		*:*)
		    temp="${user%:*}"
		    [ -n "$temp" ] && r="$r --uid-owner $temp "
		    temp="${user#*:}"
		    [ -n "$temp" ] && r="$r --gid-owner $temp "
		    ;;
		*)
		    [ -n "$user" ] && r="$r --uid-owner $user "
		    ;;
	    esac
	fi


	[ -n "$marktest" ] && r="${r}-m ${marktest}--mark $testval "

	if [ "x$dest" != "x-"  ]; then
	    case $dest in
		*:*)
		    [ "$chain" = tcpre ] && fatal_error "Destination interface is not allowed in the PREROUTING chain - rule \"$rule\""
		    interface=${dest%:*}
		    verify_interface $interface || fatal_error "Unknown interface $interface in rule \"$rule\""
		    r="$(match_dest_dev $interface) $(dest_ip_range ${dest#*:}) "
		    ;;
		*.*.*|+*|!+*)
		    r="${r}$(dest_ip_range $dest) "
		    ;;
		*)
		    [ "$chain" = tcpre ] && fatal_error "Destination interface is not allowed in the PREROUTING chain - rule \"$rule\""
		    verify_interface $dest || fatal_error "Unknown interface $dest in rule \"$rule\""
		    r="${r}$(match_dest_dev $dest) "
		    ;;
	    esac
	fi

	if [ "x${length:=-}" != "x-" ]; then
	    [ -n "$LENGTH_MATCH" ] || fatal_error "Your kernel and/or iptables does not have length match support. Rule: \"$rule\""
	    r="${r}-m length --length ${length} "
	fi

	if [ "x${tos:=-}" != "x-" ]; then
	    r="${r}-m tos --tos ${tos} "
	fi

	multiport=

	case $proto in
	    ipp2p|IPP2P|ipp2p:*|IPP2P:*)
		do_ipp2p
		;;
	    icmp|ICMP|1)
		r="${r}-p icmp "
		[ "x$port"  = "x-" ] || r="${r}--icmp-type $port"
		;;
	    *)
		[ "x$proto" = "x-"  ] && proto=all
		[ "x$proto" = "x"   ] && proto=all
		[ "$proto"  = "all" ] || r="${r}-p $proto "
		[ "x$port"  = "x-"  ] || r="${r}--dport $port "
		;;
	esac

	[ "x$sport" = "x-"  ] || r="${r}--sport $sport "

	if [ -n "${excludesources}${excludedests}" ]; then
	    build_exclusion_chain chain1 mangle "$excludesources" "$excludedests"

	    run_iptables2 -t mangle -A $chain $r -j $chain1

	    run_iptables -t mangle -A $chain1 -j $target $mark
	else
	    run_iptables2 -t mangle -A $chain $r -j $target $mark
	fi

    }

    if [ "$mark" != "${mark%:*}" ]; then
	case "${mark#*:}" in
	    p|P)
		verify_designator tcpre
		;;
	    cp|CP)
		verify_designator tcpre
		do_connmark
		;;
	    f|F)
		verify_designator tcfor
		;;
	    cf|CF)
		verify_designator tcfor
		do_connmark
		;;
	    c|C)
		mark=${mark%:*}
		do_connmark
		;;
	    *)
		chain=tcpost
		target="CLASSIFY --set-class"
		;;
	esac

    fi

    mask=0xffff

    case $mark in
	SAVE)
	    [ -n "$did_connmark" ] && fatal_error "SAVE not valid with :C[FP]"
	    target="CONNMARK --save-mark --mask 0xFF"
	    mark=
	    ;;
	SAVE/*)
	    [ -n "$did_connmark" ] && fatal_error "SAVE not valid with :C[FP]"
	    target="CONNMARK --save-mark --mask"
	    mark=${mark#*/}
	    verify_small_mark $mark
	    ;;
	RESTORE)
	    [ -n "$did_connmark" ] && fatal_error "RESTORE not valid with :C[FP]"
	    target="CONNMARK --restore-mark --mask 0xFF"
	    mark=
	    ;;
	RESTORE/*)
	    [ -n "$did_connmark" ] && fatal_error "RESTORE not valid with :C[FP]"
	    target="CONNMARK --restore-mark --mask"
	    mark=${mark#*/}
	    verify_small_mark $mark
	    ;;
	CONTINUE)
	    [ -n "$did_connmark" ] && fatal_error "CONTINUE not valid with :C[FP]"
	    target=RETURN
	    mark=
	    ;;
	*)
	    if [ "$chain" != tcpost ]; then
		validate_mark $mark
		if [ $((${mark%/*})) -gt 255 ]; then
		    case $chain in
			tcpre|tcout)
			    target="MARK --or-mark"
			    ;;
			*)
			    fatal_error "Invalid mark value ($mark) in rule \"$rule\""
			    ;;
		    esac
		elif [ $((${mark%/*})) -ne 0 -a -n "$HIGH_ROUTE_MARKS" -a $chain = tcpre ]; then
		    fatal_error "Marks < 256 may not be set in the PREROUTING chain when HIGH_ROUTE_MARKS=Yes"
		fi
	    fi
	    ;;
    esac

    case $testval in
	-)
	    ;;
	!*:C)
	    marktest="connmark ! "
	    testval=${testval%:*}
	    testval=${testval#!}
	    ;;
	*:C)
	    marktest="connmark "
	    testval=${testval%:*}
	    ;;
	!*)
	    marktest="mark ! "
	    testval=${testval#!}
	    ;;
	*)
	    [ -n "$testval" ] && marktest="mark "
	    ;;
    esac

    if [ -n "$marktest" ] ; then
	case $testval in
	    */*)
		verify_mark ${testval%/*}
		verify_mark ${testval#*/}
		;;
	    *)
		verify_mark $testval
		testval=$testval/$mask
		;;
	esac
    fi

    excludesources=

    case ${sources:=-} in
	*!*!*)
	    fatal_error "Invalid SOURCE in rule \"$rule\""
	    ;;
	!*)
	    if [ $(list_count $sources) -gt 1 ]; then
		excludesources=${sources#!}
		sources=-
	    fi
	    ;;
	*!*)
	    excludesources=${sources#*!}
	    sources=${sources%!*}
	    ;;
    esac

    excludedests=

    case ${dests:=-} in
	*!*!*)
	    fatal_error "Invalid DEST in rule \"$rule\""
	    ;;
	!*)
	    if [ $(list_count $dests) -gt 1 ]; then
		excludedests=${dests#*!}
		dests=-
	    fi
	    ;;
	*!*)
	    excludedests=${dests#*!}
	    dests=${dests%!*}
	    ;;
    esac

    for source in $(separate_list $sources); do
	for dest in $(separate_list $dests); do
	    for port in $(separate_list ${ports:=-}); do
		for sport in $(separate_list ${sports:=-}); do
		    add_a_tc_rule
		done
	    done
	done
    done

    progress_message "   TC Rule \"$rule\" $DONE"
    [ $COMMAND = compile ] && save_progress_message "   TC Rule \"$rule\" Added"
}

delete_tc1()
{
    clear_one_tc() {
	tc qdisc del dev $1 root 2> /dev/null
	tc qdisc del dev $1 ingress 2> /dev/null

    }

    run_user_exit tcclear

    run_ip link list | \
    while read inx interface details; do
	case $inx in
	    [0-9]*)
		clear_one_tc ${interface%:}
		;;
	    *)
		;;
	esac
    done
}

SHOREWALL_LIBRARY=Loaded