shorewall_code/manpages/shorewall-notrack.xml
2010-07-19 14:45:05 -07:00

159 lines
5.8 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall6-notrack</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>notrack</refname>
<refpurpose>shorewall notrack file</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall/notrack</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>The notrack file is used to exempt certain traffic from Netfilter
connection tracking. Traffic matching entries in this file will not be
tracked.</para>
<para>The columns in the file are as follows.</para>
<variablelist>
<varlistentry>
<term>SOURCE
{<emphasis>zone</emphasis>[:<emphasis>interface</emphasis>][:<emphasis>address-list</emphasis>]|COMMENT}</term>
<listitem>
<para>where <replaceable>zone</replaceable> is the name of a zone,
<replaceable>interface</replaceable> is an interface to that zone,
and <replaceable>address-list</replaceable> is a comma-separated
list of addresses (may contain exclusion - see <ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)).</para>
<para>Comments may be attached to Netfilter rules generated from
entries in this file through the use of COMMENT lines. These lines
begin with the word COMMENT; the remainder of the line is treated as
a comment which is attached to subsequent rules until another
COMMENT line is found or until the end of the file is reached. To
stop adding comments to rules, use a line with only the word
COMMENT.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>DEST
[<replaceable>interface</replaceable>|<replaceable>address-list</replaceable>]</term>
<listitem>
<para>where <replaceable>interface</replaceable> is the name of a
network interface and <replaceable>address-list</replaceable> is a
comma-separated list of addresses (may contain exclusion - see
<ulink url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)). If an interface is given:</para>
<itemizedlist>
<listitem>
<para>It must be up and configured with an IPv4 address when
Shorewall is started or restarted.</para>
</listitem>
<listitem>
<para>All routes out of the interface must be configured when
Shorewall is started or restarted.</para>
</listitem>
<listitem>
<para>Default routes out of the interface will result in a
warning message and will be ignored.</para>
</listitem>
</itemizedlist>
<para>These restrictions are because Netfilter doesn't support
NOTRACK rules that specify a destination interface (these rules are
applied before packets are routed and hence the destination
interface is unknown). Shorewall uses the routes out of the
interface to replace the interface with an address list
corresponding to the networks routed out of the named
interface.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>PROTO
<replaceable>protocol-name-or-number</replaceable></term>
<listitem>
<para>A protocol name from <filename>/etc/protocols</filename> or a
protocol number.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>DEST PORT(S) - port-number/service-name-list</term>
<listitem>
<para>A comma-separated list of port numbers and/or service names
from <filename>/etc/services</filename>. May also include port
ranges of the form
<replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
if your kernel and iptables include port range support.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>SOURCE PORT(S) - port-number/service-name-list</term>
<listitem>
<para>A comma-separated list of port numbers and/or service names
from <filename>/etc/services</filename>. May also include port
ranges of the form
<replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
if your kernel and iptables include port range support.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>USER/GROUP
[<replaceable>user</replaceable>][:<replaceable>group</replaceable>]</term>
<listitem>
<para>May only be specified if the SOURCE
<replaceable>zone</replaceable> is $FW. Specifies the effective user
id and or group id of the process sending the traffic.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall/notrack</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5),
shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5),
shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
shorewall-proxyarp(5), shorewall-route_rules(5),
shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5),
shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
</refsect1>
</refentry>