1
0
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-15 19:01:19 +01:00
shorewall_code/Shorewall/tunnel
2006-03-01 18:08:55 +00:00

167 lines
3.6 KiB
Bash
Executable File

#!/bin/sh
RCDLINKS="2,S45 3,S45 6,K45"
################################################################################
# Script to create a gre or ipip tunnel -- Shorewall 3.2
#
# Modified - Steve Cowles 5/9/2000
# Incorporated init {start|stop} syntax and iproute2 usage
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# (c) 2000,2001,2002,2003,2004,2005 - Tom Eastep (teastep@shorewall.net)
#
# Modify the following variables to match your configuration
#
# chkconfig: 2345 26 89
# description: GRE/IP Tunnel
#
################################################################################
#
# Type of tunnel (gre or ipip)
#
tunnel_type=gre
# Name of the tunnel
#
tunnel="dfwbos"
#
# Address of your External Interface (only required for gre tunnels)
#
myrealip="x.x.x.x"
# Address of the local system -- this is the address of one of your
# local interfaces (or for a mobile host, the address that this system has
# when attached to the local network).
#
myip="192.168.1.254"
# Address of the Remote system -- this is the address of one of the
# remote system's local interfaces (or if the remote system is a mobile host,
# the address that it uses when attached to the local network).
hisip="192.168.9.1"
# Internet address of the Remote system
#
gateway="x.x.x.x"
# Remote sub-network -- if the remote system is a gateway for a
# private subnetwork that you wish to
# access, enter it here. If the remote
# system is a stand-alone/mobile host, leave this
# empty
subnet="192.168.9.0/24"
# GRE Key -- set this to a number or to a dotted quad if you want
# a keyed GRE tunnel. You must specify a KEY if you
# intend to load ip_conntrack_proto_gre on either
# gateway system
key=
PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin
load_modules () {
case $tunnel_type in
ipip)
echo "Loading IP-ENCAP Module"
modprobe ipip
;;
gre)
echo "Loading GRE Module"
modprobe ip_gre
;;
esac
}
do_stop() {
if [ -n "`ip link show $tunnel 2>/dev/null`" ]; then
echo "Stopping $tunnel"
ip link set dev $tunnel down
fi
if [ -n "`ip addr show $tunnel 2>/dev/null`" ]; then
echo "Deleting $tunnel"
ip tunnel del $tunnel
fi
}
do_start() {
#NOTE: Comment out the next line if you have built gre/ipip into your kernel
load_modules
if [ -n "`ip link show $tunnel 2>/dev/null`" ]; then
do_stop
fi
echo "Adding $tunnel"
case $tunnel_type in
gre)
ip tunnel add $tunnel mode gre remote $gateway local $myrealip ttl 255 ${key:+key $key}
;;
*)
ip tunnel add $tunnel mode ipip remote $gateway
;;
esac
echo "Starting $tunnel"
ip link set dev $tunnel up
case $tunnel_type in
gre)
ip addr add $myip dev $tunnel
;;
*)
ip addr add $myip peer $hisip dev $tunnel
;;
esac
#
# As with all interfaces, the 2.4 kernels will add the obvious host
# route for this point-to-point interface
#
if [ -n "$subnet" ]; then
echo "Adding Routes"
case $tunnel_type in
gre)
ip route add $subnet dev $tunnel
;;
ipip)
ip route add $subnet via $gateway dev $tunnel onlink
;;
esac
fi
}
case "$1" in
start)
do_start
;;
stop)
do_stop
;;
restart)
do_stop
sleep 1
do_start
;;
*)
echo "Usage: $0 {start|stop|restart}"
exit 1
esac
exit 0