shorewall_code/Shorewall/manpages/shorewall-conntrack.xml
Tuomo Soini be924ff765
Fix http links to point to current project website
Also removes deprecated Shorewall6/configfiles/masq

Signed-off-by: Tuomo Soini <tis@foobar.fi>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2020-03-27 14:24:37 -07:00

786 lines
31 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall6-conntrack</refentrytitle>
<manvolnum>5</manvolnum>
<refmiscinfo>Configuration Files</refmiscinfo>
</refmeta>
<refnamediv>
<refname>conntrack</refname>
<refpurpose>shorewall conntrack file</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall[6]/conntrack</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>The original intent of the <emphasis role="bold">notrack</emphasis>
file was to exempt certain traffic from Netfilter connection tracking.
Traffic matching entries in the file were not to be tracked.</para>
<para>The role of the file was expanded in Shorewall 4.4.27 to include all
rules that can be added in the Netfilter <emphasis
role="bold">raw</emphasis> table. In 4.5.7, the file's name was changed to
<emphasis role="bold">conntrack</emphasis>.</para>
<para>The file supports three different column layouts: FORMAT 1, FORMAT
2, and FORMAT 3 with FORMAT 1 being the default. The three differ as
follows:</para>
<itemizedlist>
<listitem>
<para>in FORMAT 2 and 3, there is an additional leading ACTION
column.</para>
</listitem>
<listitem>
<para>in FORMAT 3, the SOURCE column accepts no zone name; rather the
ACTION column allows a SUFFIX that determines the chain(s) that the
generated rule will be added to.</para>
</listitem>
</itemizedlist>
<para>When an entry in the following form is encountered, the format of
the following entries are assumed to be of the specified
<replaceable>format</replaceable>.</para>
<simplelist>
<member><emphasis role="bold">?FORMAT</emphasis>
<replaceable>format</replaceable></member>
</simplelist>
<para>where <replaceable>format</replaceable> is either <emphasis
role="bold">1</emphasis>,<emphasis role="bold">2</emphasis> or <emphasis
role="bold">3</emphasis>.</para>
<para>Format 3 was introduced in Shorewall 4.5.10.</para>
<para>Comments may be attached to Netfilter rules generated from entries
in this file through the use of ?COMMENT lines. These lines begin with
?COMMENT; the remainder of the line is treated as a comment which is
attached to subsequent rules until another ?COMMENT line is found or until
the end of the file is reached. To stop adding comments to rules, use a
line containing only ?COMMENT.</para>
<para>The columns in the file are as follows (where the column name is
followed by a different name in parentheses, the different name is used in
the alternate specification syntax).</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">ACTION</emphasis> - {<emphasis
role="bold">NOTRACK</emphasis>|<emphasis
role="bold">CT</emphasis>:<emphasis
role="bold">helper</emphasis>:<replaceable>name</replaceable>[(<replaceable>arg</replaceable>=<replaceable>val</replaceable>[,...])|<emphasis
role="bold">CT:ctevents:<replaceable>event</replaceable>[,...]|CT:expevents:new</emphasis><emphasis
role="bold">|CT:notrack</emphasis>|DROP|LOG|ULOG(<replaceable>ulog-parameters</replaceable>):NFLOG(<replaceable>nflog-parameters</replaceable>)|IP[6]TABLES(<replaceable>target</replaceable>)}[<replaceable>log-level</replaceable>[:<replaceable>log-tag</replaceable>]][:<replaceable>chain-designator</replaceable>]</term>
<listitem>
<para>This column is only present when FORMAT &gt;= 2. Values other
than NOTRACK or DROP require <firstterm>CT Target
</firstterm>support in your iptables and kernel.</para>
<itemizedlist>
<listitem>
<para><option>NOTRACK</option> or
<option>CT:notrack</option></para>
<para>Disables connection tracking for this packet. If a
<replaceable>log-level</replaceable> is specified, the packet
will also be logged at that level.</para>
</listitem>
<listitem>
<para><option>CT:helper</option>:<replaceable>name</replaceable></para>
<para>Attach the helper identified by the
<replaceable>name</replaceable> to this connection. This is more
flexible than loading the conntrack helper with preset ports. If
a <replaceable>log-level</replaceable> is specified, the packet
will also be logged at that level. Beginning with Shorewall
4.6.10, the helper name is optional</para>
<para>At this writing, the available helpers are:</para>
<variablelist>
<varlistentry>
<term>amanda</term>
<listitem>
<para>Requires that the amanda netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>ftp</term>
<listitem>
<para>Requires that the FTP netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>irc</term>
<listitem>
<para>Requires that the IRC netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>netbios-ns</term>
<listitem>
<para>Requires that the netbios_ns (sic) helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>RAS and Q.931</term>
<listitem>
<para>These require that the H323 netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>pptp</term>
<listitem>
<para>Requires that the pptp netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>sane</term>
<listitem>
<para>Requires that the SANE netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>sip</term>
<listitem>
<para>Requires that the SIP netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>snmp</term>
<listitem>
<para>Requires that the SNMP netfilter helper is
present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>tftp</term>
<listitem>
<para>Requires that the TFTP netfilter helper is
present.</para>
</listitem>
</varlistentry>
</variablelist>
<para>May be followed by an option list of
<replaceable>arg</replaceable>=<replaceable>val</replaceable>
pairs in parentheses:</para>
<itemizedlist>
<listitem>
<para><option>ctevents</option>=<replaceable>event</replaceable>[,...]</para>
<para>Only generate the specified conntrack events for this
connection. Possible event types are: <emphasis
role="bold">new</emphasis>, <emphasis
role="bold">related</emphasis>, <emphasis
role="bold">destroy</emphasis>, <emphasis
role="bold">reply</emphasis>, <emphasis
role="bold">assured</emphasis>, <emphasis
role="bold">protoinfo</emphasis>, <emphasis
role="bold">helper</emphasis>, <emphasis
role="bold">mark</emphasis> (this is connection mark, not
packet mark), <emphasis role="bold">natseqinfo</emphasis>,
and <emphasis role="bold">secmark</emphasis>. If more than
one <emphasis>event</emphasis> is listed, the
<replaceable>event</replaceable> list must be enclosed in
parentheses (e.g., ctevents=(new,related)).</para>
</listitem>
<listitem>
<para><option>expevents</option><option>=new</option></para>
<para>Only generate a <emphasis role="bold">new</emphasis>
expectation events for this connection.</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>ctevents:<replaceable>event</replaceable>[,...]</para>
<para>Added in Shorewall 4.6.10. Only generate the specified
conntrack events for this connection. Possible event types are:
<emphasis role="bold">new</emphasis>, <emphasis
role="bold">related</emphasis>, <emphasis
role="bold">destroy</emphasis>, <emphasis
role="bold">reply</emphasis>, <emphasis
role="bold">assured</emphasis>, <emphasis
role="bold">protoinfo</emphasis>, <emphasis
role="bold">helper</emphasis>, <emphasis
role="bold">mark</emphasis> (this is connection mark, not packet
mark), <emphasis role="bold">natseqinfo</emphasis>, and
<emphasis role="bold">secmark</emphasis>.</para>
</listitem>
<listitem>
<para>expevents=new</para>
<para>Added in Shorewall 4.6.10. Only generate <emphasis
role="bold">new</emphasis> expectation events for this
connection.</para>
</listitem>
<listitem>
<para><option>DROP</option></para>
<para>Added in Shorewall 4.5.10. Silently discard the packet. If
a <replaceable>log-level</replaceable> is specified, the packet
will also be logged at that level.</para>
</listitem>
<listitem>
<para><option>IP6TABLES</option>(<replaceable>target</replaceable>)</para>
<para>IPv6 only.</para>
<para>Added in Shorewall 4.6.0. Allows you to specify any
iptables <replaceable>target</replaceable> with target options
(e.g., "IP6TABLES(AUDIT --type drop)"). If the target is not one
recognized by Shorewall, the following error message will be
issued:</para>
<simplelist>
<member>ERROR: Unknown target
(<replaceable>target</replaceable>)</member>
</simplelist>
<para>This error message may be eliminated by adding
<replaceable>target</replaceable> as a builtin action in <ulink
url="shorewall-actions.html">shorewall-actions</ulink>(5).</para>
</listitem>
<listitem>
<para><option>IPTABLES</option>(<replaceable>target</replaceable>)</para>
<para>IPv4 only.</para>
<para>Added in Shorewall 4.6.0. Allows you to specify any
iptables <replaceable>target</replaceable> with target options
(e.g., "IPTABLES(AUDIT --type drop)"). If the target is not one
recognized by Shorewall, the following error message will be
issued:</para>
<simplelist>
<member>ERROR: Unknown target
(<replaceable>target</replaceable>)</member>
</simplelist>
<para>This error message may be eliminated by adding
<replaceable>target</replaceable> as a builtin action in <ulink
url="shorewall-actions.html">shorewall-actions</ulink>(5).</para>
</listitem>
<listitem>
<para><option>LOG</option></para>
<para>Added in Shoreawll 4.6.0. Logs the packet using the
specified <replaceable>log-level</replaceable> and<replaceable>
log-tag </replaceable>(if any). If no log-level is specified,
then 'info' is assumed.</para>
</listitem>
<listitem>
<para><option>NFLOG</option></para>
<para>Added in Shoreawll 4.6.0. Queues the packet to a backend
logging daemon using the NFLOG netfilter target with the
specified <replaceable>nflog-parameters</replaceable>.</para>
</listitem>
<listitem>
<para><option>ULOG</option></para>
<para>IPv4 only. Added in Shoreawll 4.6.0. Queues the packet to
a backend logging daemon using the ULOG netfilter target with
the specified <replaceable>ulog-parameters</replaceable>.</para>
</listitem>
</itemizedlist>
<para>When FORMAT = 1, this column is not present and the rule is
processed as if NOTRACK had been entered in this column.</para>
<para>Beginning with Shorewall 4.5.10, when FORMAT = 3, this column
can end with a colon followed by a
<replaceable>chain-designator</replaceable>. The
<replaceable>chain-designator</replaceable> can be one of the
following:</para>
<variablelist>
<varlistentry>
<term>P</term>
<listitem>
<para>The rule is added to the raw table PREROUTING chain.
This is the default if no
<replaceable>chain-designator</replaceable> is present.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>O</term>
<listitem>
<para>The rule is added to the raw table OUTPUT chain.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>PO or OP</term>
<listitem>
<para>The rule is added to the raw table PREROUTING and OUTPUT
chains.</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term>SOURCE (formats 1 and 2)
{<emphasis>zone</emphasis>[:<emphasis>interface</emphasis>][:<emphasis>address-list</emphasis>]}</term>
<listitem>
<para>where <replaceable>zone</replaceable> is the name of a zone,
<replaceable>interface</replaceable> is an interface to that zone,
and <replaceable>address-list</replaceable> is a comma-separated
list of addresses (may contain exclusion - see <ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)).</para>
<para>Beginning with Shorewall 4.5.7, <option>all</option> can be
used as the <replaceable>zone</replaceable> name to mean
<firstterm>all zones</firstterm>.</para>
<para>Beginning with Shorewall 4.5.10, <option>all-</option> can be
used as the <replaceable>zone</replaceable> name to mean all
<firstterm>off-firewall zone</firstterm>s.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>SOURCE (format 3 prior to Shorewall 5.1.0)
{-|<emphasis>interface</emphasis>[:<emphasis>address-list</emphasis>]|<replaceable>address-list</replaceable>}</term>
<listitem>
<para>Where <replaceable>interface</replaceable> is an interface to
that zone, and <replaceable>address-list</replaceable> is a
comma-separated list of addresses (may contain exclusion - see
<ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">SOURCE (format 3 on Shorewall 5.1.0 and
later) -
{-|[<replaceable>source-spec</replaceable>[,...]]}</emphasis></term>
<listitem>
<para>where <replaceable>source-spec</replaceable> is one of the
following:</para>
<variablelist>
<varlistentry>
<term><replaceable>interface</replaceable></term>
<listitem>
<para>Where interface is the logical name of an interface
defined in <ulink
url="shorewall-interfaces.html">shorewall-interface</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>]</term>
<listitem>
<para>where <replaceable>address</replaceable> may be:</para>
<itemizedlist>
<listitem>
<para>A host or network IP address.</para>
</listitem>
<listitem>
<para>A MAC address in Shorewall format (preceded by a
tilde ("~") and using dash ("-") as a separator.</para>
</listitem>
<listitem>
<para>The name of an ipset preceded by a plus sign ("+").
See <ulink
url="shorewall-ipsets.html">shorewall-ipsets</ulink>(5).</para>
</listitem>
</itemizedlist>
<para><replaceable>exclusion</replaceable> is described in
<ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><replaceable>interface</replaceable>:<replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>]</term>
<listitem>
<para>This form combines the preceding two and requires that
both the incoming interface and source address match.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><replaceable>exclusion</replaceable></term>
<listitem>
<para>See <ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)</para>
</listitem>
</varlistentry>
</variablelist>
<para>Beginning with Shorewall 5.1.0, multiple
<replaceable>source-spec</replaceable>s separated by commas may be
specified provided that the following alternative forms are
used:</para>
<blockquote>
<para>(<replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>])</para>
<para><replaceable>interface</replaceable>:(<replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>])</para>
<para>(<replaceable>exclusion</replaceable>)</para>
</blockquote>
</listitem>
</varlistentry>
<varlistentry>
<term>DEST (Prior to Shorewall 5.1.0)
{-|<emphasis>interface</emphasis>[:<emphasis>address-list</emphasis>]|<replaceable>address-list</replaceable>}</term>
<listitem>
<para>where <replaceable>address-list</replaceable> is a
comma-separated list of addresses (may contain exclusion - see
<ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DEST (Shorewall 5.1.0 and later) -
{-|<replaceable>dest-spec</replaceable>[,...]}</emphasis></term>
<listitem>
<para>where <replaceable>dest-spec</replaceable> is one of the
following:</para>
<variablelist>
<varlistentry>
<term><replaceable>interface</replaceable></term>
<listitem>
<para>Where interface is the logical name of an interface
defined in <ulink
url="shorewall-interfaces.html">shorewall-interface</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>]</term>
<listitem>
<para>where <replaceable>address</replaceable> may be:</para>
<itemizedlist>
<listitem>
<para>A host or network IP address.</para>
</listitem>
<listitem>
<para>A MAC address in Shorewall format (preceded by a
tilde ("~") and using dash ("-") as a separator.</para>
</listitem>
<listitem>
<para>The name of an ipset preceded by a plus sign ("+").
See <ulink
url="shorewall-ipsets.html">shorewall-ipsets</ulink>(5).</para>
</listitem>
</itemizedlist>
<para><replaceable>exclusion</replaceable> is described in
<ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><replaceable>interface</replaceable>:<replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>]</term>
<listitem>
<para>This form combines the preceding two and requires that
both the outgoing interface and destination address
match.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><replaceable>exclusion</replaceable></term>
<listitem>
<para>See <ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink>
(5)</para>
</listitem>
</varlistentry>
</variablelist>
<para>Beginning with Shorewall 5.1.0, multiple source-specs
separated by commas may be specified provided that the following
alternative forms are used:</para>
<blockquote>
<para>(<replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>])</para>
<para><replaceable>interface</replaceable>:(<replaceable>address</replaceable>[,...][<replaceable>exclusion</replaceable>])</para>
<para>(<replaceable>exclusion</replaceable>)</para>
</blockquote>
</listitem>
</varlistentry>
<varlistentry>
<term>PROTO
<replaceable>protocol-name-or-number</replaceable>[,...]</term>
<listitem>
<para>A protocol name from <filename>/etc/protocols</filename> or a
protocol number. tcp and 6 may be optionally followed by <emphasis
role="bold">:syn </emphasis>to match only the SYN packet (first
packet in the three-way handshake).</para>
<para>Beginning with Shorewall 4.5.12, this column can accept a
comma-separated list of protocols and either <emphasis
role="bold">proto</emphasis> or <emphasis
role="bold">protos</emphasis> is accepted in the alternate input
format.</para>
<para>Beginning with Shorewall 5.1.11, when <emphasis
role="bold">tcp</emphasis> or <emphasis role="bold">6</emphasis> is
specified and the ACTION is <emphasis role="bold">CT</emphasis>, the
compiler will default to <emphasis role="bold">:syn</emphasis>. If
you wish the rule to match packets with any valid combination of TCP
flags, you may specify <emphasis role="bold">tcp:all</emphasis> or
<emphasis role="bold">6:all</emphasis>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>DPORT - port-number/service-name-list</term>
<listitem>
<para>A comma-separated list of port numbers and/or service names
from <filename>/etc/services</filename>. May also include port
ranges of the form
<replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
if your kernel and iptables include port range support.</para>
<para>This column was formerly labelled DEST PORT(S).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>SPORT - port-number/service-name-list</term>
<listitem>
<para>A comma-separated list of port numbers and/or service names
from <filename>/etc/services</filename>. May also include port
ranges of the form
<replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
if your kernel and iptables include port range support.</para>
<para>Beginning with Shorewall 4.5.15, you may place '=' in this
column, provided that the DPORT column is non-empty. This causes the
rule to match when either the source port or the destination port in
a packet matches one of the ports specified in DPORT. Use of '='
requires multi-port match in your iptables and kernel.</para>
<para>This column was formerly labelled SOURCE PORT(S).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>USER
[<replaceable>user</replaceable>][:<replaceable>group</replaceable>]</term>
<listitem>
<para>This column was formerly named USER/GROUP and may only be
specified if the SOURCE <replaceable>zone</replaceable> is $FW.
Specifies the effective user id and or group id of the process
sending the traffic.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">SWITCH -
[!]<replaceable>switch-name</replaceable>[={0|1}]</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.10 and allows enabling and disabling
the rule without requiring <command>shorewall
restart</command>.</para>
<para>The rule is enabled if the value stored in
<filename>/proc/net/nf_condition/<replaceable>switch-name</replaceable></filename>
is 1. The rule is disabled if that file contains 0 (the default). If
'!' is supplied, the test is inverted such that the rule is enabled
if the file contains 0.</para>
<para>Within the <replaceable>switch-name</replaceable>, '@0' and
'@{0}' are replaced by the name of the chain to which the rule is a
added. The <replaceable>switch-name</replaceable> (after '...'
expansion) must begin with a letter and be composed of letters,
decimal digits, underscores or hyphens. Switch names must be 30
characters or less in length.</para>
<para>Switches are normally <emphasis role="bold">off</emphasis>. To
turn a switch <emphasis role="bold">on</emphasis>:</para>
<simplelist>
<member><command>echo 1 &gt;
/proc/net/nf_condition/<replaceable>switch-name</replaceable></command></member>
</simplelist>
<para>To turn it <emphasis role="bold">off</emphasis> again:</para>
<simplelist>
<member><command>echo 0 &gt;
/proc/net/nf_condition/<replaceable>switch-name</replaceable></command></member>
</simplelist>
<para>Switch settings are retained over <command>shorewall
restart</command>.</para>
<para>When the <replaceable>switch-name</replaceable> is followed by
<option>=0</option> or <option>=1</option>, then the switch is
initialized to off or on respectively by the
<command>start</command> command. Other commands do not affect the
switch setting.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>EXAMPLE</title>
<para>IPv4 Example 1:</para>
<programlisting>#ACTION SOURCE DEST PROTO DPORT SPORT USER
CT:helper:ftp(expevents=new) fw - tcp 21 </programlisting>
<para>IPv4 Example 2 (Shorewall 4.5.10 or later):</para>
<para>Drop traffic to/from all zones to IP address 1.2.3.4</para>
<programlisting>?FORMAT 2
#ACTION SOURCE DEST PROTO DPORT SPORT USER
DROP all-:1.2.3.4 -
DROP all 1.2.3.4</programlisting>
<para>or<programlisting>?FORMAT 3
#ACTION SOURCE DEST PROTO DPORT SPORT USER
DROP:P 1.2.3.4 -
DROP:PO - 1.2.3.4
</programlisting></para>
<para>IPv6 Example 1:</para>
<para>Use the FTP helper for TCP port 21 connections from the firewall
itself.</para>
<programlisting>FORMAT 2
#ACTION SOURCE DEST PROTO DPORT SPORT USER
CT:helper:ftp(expevents=new) fw - tcp 21 </programlisting>
<para>IPv6 Example 2 (Shorewall 4.5.10 or later):</para>
<para>Drop traffic to/from all zones to IP address 2001:1.2.3::4</para>
<programlisting>FORMAT 2
#ACTION SOURCE DEST PROTO DPORT SPORT USER
DROP all-:2001:1.2.3::4 -
DROP all 2001:1.2.3::4
</programlisting>
<para>or<programlisting>FORMAT 3
#ACTION SOURCE DEST PROTO DPORT SPORT USER
DROP:P 2001:1.2.3::4 -
DROP:PO - 2001:1.2.3::4</programlisting></para>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall/conntrack</para>
<para>/etc/shorewall6/conntrack</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="../configuration_file_basics.htm#Pairs">https://shorewall.org/configuration_file_basics.htm#Pairs</ulink></para>
<para>shorewall(8)</para>
</refsect1>
</refentry>