shorewall_code/Shorewall/manpages/shorewall-stoppedrules.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall-stoppedrules</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>stoppedrules</refname>

    <refpurpose>The Shorewall file that governs what traffic flows through the
    firewall while it is in the 'stopped' state.</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/stoppedrules</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>This file is used to define the hosts that are accessible when the
    firewall is stopped or is being stopped.</para>

    <warning>
      <para>Changes to this file do not take effect until after the next
      <command>shorewall start</command>, <command>shorewall
      restart</command>, or <option>shorewall compile</option> command.</para>
    </warning>

    <para>The columns in the file are as follows (where the column name is
    followed by a different name in parentheses, the different name is used in
    the alternate specification syntax).</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">ACTION</emphasis> -
        <option>ACCEPT|NOTRACK</option></term>

        <listitem>
          <para>Determines the disposition of the packet.
          <option>ACCEPT</option> means that the packet will be accepted.
          <option>NOTRACK</option> indicates that no conntrack entry should be
          created for the packet. <option>NOTRACK</option> does not imply
          <option>ACCEPT</option>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SOURCE</emphasis> - [<emphasis
        role="bold">-</emphasis>|[$FW|<replaceable>interface</replaceable>]|[{$FW|interface}[<emphasis>:address</emphasis>[,<emphasis>address</emphasis>]...]]|[<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...]</term>

        <listitem>
          <para><option>$FW</option> matches packets originating on the
          firewall itself, while <replaceable>interface</replaceable>
          specifies packets arriving on the named interface.</para>

          <para>This column may also include a comma-separated list of
          IP/subnet addresses. If your kernel and iptables include iprange
          match support, IP address ranges are also allowed. Ipsets and
          exclusion are also supported. When <option>$FW</option> or interface
          are specified, the list must be preceded by a colon (":").</para>

          <para>If left empty or supplied as "-", 0.0.0.0/0 is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DEST</emphasis> - [<emphasis
        role="bold">-</emphasis>|[$FW|<replaceable>interface</replaceable>]|[{$FW|interface}[<emphasis>:address</emphasis>[,<emphasis>address</emphasis>]...]]|[<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...]</term>

        <listitem>
          <para><option>$FW</option> matches packets addressed the firewall
          itself, while <replaceable>interface</replaceable> specifies packets
          arriving on the named interface. Neither may be specified if the
          target is <option>NOTRACK</option>.</para>

          <para>This column may also include a comma-separated list of
          IP/subnet addresses. If your kernel and iptables include iprange
          match support, IP address ranges are also allowed. Ipsets and
          exclusion are also supported. When <option>$FW</option> or interface
          are specified, the list must be preceded by a colon (":").</para>

          <para>If left empty or supplied as "-", 0.0.0.0/0 is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>PROTO (Optional) ‒
        <replaceable>protocol-name-or-number</replaceable>[,...]</term>

        <listitem>
          <para>Protocol.</para>

          <para>Beginning with Shorewall 4.5.12, this column can accept a
          comma-separated list of protocols.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>DEST PORT(S) (dport) ‒
        <replaceable>service-name/port-number-list</replaceable></term>

        <listitem>
          <para>Optional. A comma-separated list of port numbers and/or
          service names from <filename>/etc/services</filename>. May also
          include port ranges of the form
          <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
          if your kernel and iptables include port range support.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>SOURCE PORT(S) (sport) ‒
        <replaceable>service-name/port-number-list</replaceable></term>

        <listitem>
          <para>Optional. A comma-separated list of port numbers and/or
          service names from <filename>/etc/services</filename>. May also
          include port ranges of the form
          <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
          if your kernel and iptables include port range support.</para>

          <para>Beginning with Shorewall 4.5.15, you may place '=' in this
          column, provided that the DEST PORT(S) column is non-empty. This
          causes the rule to match when either the source port or the
          destination port in a packet matches one of the ports specified in
          DEST PORTS(S). Use of '=' requires multi-port match in your iptables
          and kernel.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/stoppedrules</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://shorewall.net/starting_and_stopping_shorewall.htm">http://shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>

    <para><ulink
    url="http://shorewall.net/configuration_file_basics.htm#Pairs">http://shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-rtrules(5), shorewall-rules(5), shorewall.conf(5),
    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
    shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5),
    shorewall-zones(5)</para>
  </refsect1>
</refentry>