shorewall_code/Shorewall6/manpages/shorewall6-masq.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall6-masq</refentrytitle>

    <manvolnum>5</manvolnum>

    <refmiscinfo>Configuration Files</refmiscinfo>
  </refmeta>

  <refnamediv>
    <refname>masq</refname>

    <refpurpose>Shorewall6 Masquerade/SNAT definition file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall6/masq</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>Use this file to define Source NAT (SNAT). Requires Shorewall 4.5.14
    or later.</para>

    <warning>
      <para>The entries in this file are order-sensitive. The first entry that
      matches a particular connection will be the one that is used.</para>
    </warning>

    <warning>
      <para>If you have more than one ISP link, adding entries to this file
      will <emphasis role="bold">not</emphasis> force connections to go out
      through a particular link. You must use entries in <ulink
      url="/manpages6/shorewall6-rtrules.html">shorewall6-rtrules</ulink>(5)
      or PREROUTING entries in <ulink
      url="/manpages6/shorewall6-tcrules.html">shorewall-tcrules</ulink>(5) to
      do that.</para>
    </warning>

    <para>The columns in the file are as follows.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">INTERFACE:DEST</emphasis> - {[<emphasis
        role="bold">+</emphasis>]<emphasis>interfacelist</emphasis>|[<emphasis
        role="bold">:</emphasis>[<emphasis>dest-address</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>dest-address</emphasis>]...[<emphasis>exclusion</emphasis>]]|[?]COMMENT}</term>

        <listitem>
          <para>Outgoing <emphasis>interfacelist</emphasis>. This may be a
          comma-separated list of interface names. This is usually your
          internet interface.</para>

          <para>Each interface must match an entry in <ulink
          url="/manpages6/shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5).
          Shorewall allows loose matches to wildcard entries in <ulink
          url="/manpages6/shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5).
          For example, <filename class="devicefile">ppp0</filename> in this
          file will match a <ulink
          url="/manpages6/shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5)
          entry that defines <filename
          class="devicefile">ppp+</filename>.</para>

          <para>Where <ulink url="/4.4/MultiISP.html#Shared">more that one
          internet provider share a single interface</ulink>, the provider is
          specified by including the provider name or number in
          parentheses:</para>

          <programlisting>        eth0(Avvanta)</programlisting>

          <para>In that case, you will want to specify the interface's address
          for that provider in the ADDRESS column.</para>

          <para>The interface may be qualified by adding the character ":"
          followed by a comma-separated list of destination host or subnet
          addresses to indicate that you only want to change the source IP
          address for packets being sent to those particular destinations.
          Exclusion is allowed (see <ulink
          url="/manpages6/shorewall6-exclusion.html">shorewall6-exclusion</ulink>(5))
          as are ipset names preceded by a plus sign '+'.</para>

          <para>Comments may be attached to Netfilter rules generated from
          entries in this file through the use of COMMENT lines. These lines
          begin with the word COMMENT; the remainder of the line is treated as
          a comment which is attached to subsequent rules until another
          COMMENT line is found or until the end of the file is reached. To
          stop adding comments to rules, use a line with only the word
          COMMENT.</para>

          <note>
            <para>Beginning with Shorewall 4.5.11, ?COMMENT is a synonym for
            COMMENT and is preferred.</para>
          </note>

          <para>Beginning with Shorewall 4.6.0, a new syntax is also accepted.
          With the exception of the leading '+', the interfacelist and
          qualifiers may appear within the parentheses of <emphasis
          role="bold">INLINE</emphasis>(...).</para>

          <para>Example:</para>

          <programlisting>        +INLINE(eth0)</programlisting>

          <para>When this is done, you may augment the rule generated by
          Shorewall with iptables matches of your own. These matches appear
          after a semicolon (';') at the end of the line.</para>

          <para>See example 2 below.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SOURCE</emphasis> (Optional) -
        [<emphasis>interface</emphasis>|<emphasis>address</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>address</emphasis>][<emphasis>exclusion</emphasis>]]</term>

        <listitem>
          <para>Set of hosts that you wish to SNAT; one or more host or
          network addresses separated by comma. You may use ipset names
          preceded by a plus sign (+) to specify a set of hosts.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ADDRESS</emphasis> (Optional) - [<emphasis
        role="bold">-</emphasis>|<emphasis
        role="bold">NONAT</emphasis>|[<emphasis>address-or-address-range</emphasis>[,<emphasis>address-or-address-range</emphasis>]...][:<emphasis>lowport</emphasis><emphasis
        role="bold">-</emphasis><emphasis>highport</emphasis>][<emphasis
        role="bold">:random</emphasis>][:persistent]|<emphasis
        role="bold">detect</emphasis>|<emphasis
        role="bold">random</emphasis>]</term>

        <listitem>
          <para>If you do not specify an address or address range,
          masquerading will be performed. This requires <firstterm>Masquerade
          Target</firstterm> support in your kernel and ip6tables.</para>

          <para>If you specify an address here, SNAT will be used and this
          will be the source address.</para>

          <para>You may also specify a range of up to 256 IP addresses if you
          want the SNAT address to be assigned from that range in a
          round-robin fashion by connection. The range is specified by
          <emphasis>first.ip.in.range</emphasis>-<emphasis>last.ip.in.range</emphasis>.
          You may follow the port range with<emphasis
          role="bold">:random</emphasis> in which case assignment of ports
          from the list will be random. <emphasis
          role="bold">random</emphasis> may also be specified by itself in
          this column in which case random local port assignments are made for
          the outgoing connections.</para>

          <para>Example:
          [2001:470:a:227::2]-[2001:470:a:227::10]:1000-1010</para>

          <para>You may follow the port range (or <emphasis
          role="bold">:random</emphasis>) with <emphasis
          role="bold">:persistent</emphasis>. This is only useful when an
          address range is specified and causes a client to be given the same
          source/destination IP pair.</para>

          <para>This column may not contain DNS Names.</para>

          <para>Normally, Netfilter will attempt to retain the source port
          number. You may cause netfilter to remap the source port by
          following an address or range (if any) by ":" and a port range with
          the format
          <emphasis>lowport</emphasis>-<emphasis>highport</emphasis>. If this
          is done, you must specify "tcp" or "udp" in the PROTO column.</para>

          <para>Examples:</para>

          <programlisting>        [2001:470:a:787::2]:5000-6000</programlisting>

          <para>If you simply place <emphasis role="bold">NONAT</emphasis> in
          this column, no rewriting of the source IP address or port number
          will be performed. This is useful if you want particular traffic to
          be exempt from the entries that follow in the file.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">PROTO</emphasis> (Optional) - {<emphasis
        role="bold">-</emphasis>|[!]{<emphasis>protocol-name</emphasis>|<emphasis>protocol-number</emphasis>}[,...]|+<replaceable>ipset</replaceable>}</term>

        <listitem>
          <para>If you wish to restrict this entry to a particular protocol
          then enter the protocol name (from protocols(5)) or number
          here.</para>

          <para>Beginning with Shorewall 4.5.12, this column can accept a
          comma-separated list of protocols.</para>

          <para>Beginning with Shorewall 4.6.0, an
          <replaceable>ipset</replaceable> name can be specified in this
          column. This is intended to be used with
          <firstterm>bitmap:port</firstterm> ipsets.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">PORT(S)</emphasis> (Optional) -
        {-|[!]<emphasis>port-name-or-number</emphasis>[,<emphasis>port-name-or-number</emphasis>]...|+<replaceable>ipset</replaceable>}</term>

        <listitem>
          <para>If the PROTO column specifies TCP (6), UDP (17), DCCP (33),
          SCTP (132) or UDPLITE (136) then you may list one or more port
          numbers (or names from services(5)) or port ranges separated by
          commas.</para>

          <para>Port ranges are of the form
          <emphasis>lowport</emphasis>:<emphasis>highport</emphasis>.</para>

          <para>Beginning with Shorewall 4.6.0, an
          <replaceable>ipset</replaceable> name can be specified in this
          column. This is intended to be used with
          <firstterm>bitmap:port</firstterm> ipsets.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">IPSEC</emphasis> (Optional) -
        [<emphasis>option</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>

        <listitem>
          <para>If you specify a value other than "-" in this column, you must
          be running kernel 2.6 and your kernel and iptables must include
          policy match support.</para>

          <para>Comma-separated list of options from the following. Only
          packets that will be encrypted via an SA that matches these options
          will have their source address changed.</para>

          <variablelist>
            <varlistentry>
              <term><emphasis
              role="bold">reqid=</emphasis><emphasis>number</emphasis></term>

              <listitem>
                <para>where <emphasis>number</emphasis> is specified using
                setkey(8) using the 'unique:<emphasis>number</emphasis> option
                for the SPD level.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">spi=</emphasis>&lt;number&gt;</term>

              <listitem>
                <para>where <emphasis>number</emphasis> is the SPI of the SA
                used to encrypt/decrypt packets.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">proto=</emphasis><emphasis
              role="bold">ah</emphasis>|<emphasis
              role="bold">esp</emphasis>|<emphasis
              role="bold">ipcomp</emphasis></term>

              <listitem>
                <para>IPSEC Encapsulation Protocol</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">mss=</emphasis><emphasis>number</emphasis></term>

              <listitem>
                <para>sets the MSS field in TCP packets</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">mode=</emphasis><emphasis
              role="bold">transport</emphasis>|<emphasis
              role="bold">tunnel</emphasis></term>

              <listitem>
                <para>IPSEC mode</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">tunnel-src=</emphasis><emphasis>address</emphasis>[/<emphasis>mask</emphasis>]</term>

              <listitem>
                <para>only available with mode=tunnel</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">tunnel-dst=</emphasis><emphasis>address</emphasis>[/<emphasis>mask</emphasis>]</term>

              <listitem>
                <para>only available with mode=tunnel</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">strict</emphasis></term>

              <listitem>
                <para>Means that packets must match all rules.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">next</emphasis></term>

              <listitem>
                <para>Separates rules; can only be used with strict</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">yes</emphasis></term>

              <listitem>
                <para>When used by itself, causes all traffic that will be
                encrypted/encapsulated to match the rule.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MARK</emphasis> - [<emphasis
        role="bold">!</emphasis>]<emphasis>value</emphasis>[/<emphasis>mask</emphasis>][<emphasis
        role="bold">:C</emphasis>]</term>

        <listitem>
          <para>Defines a test on the existing packet or connection mark. The
          rule will match only if the test returns true.</para>

          <para>If you don't want to define a test but need to specify
          anything in the following columns, place a "-" in this field.</para>

          <variablelist>
            <varlistentry>
              <term>!</term>

              <listitem>
                <para>Inverts the test (not equal)</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis>value</emphasis></term>

              <listitem>
                <para>Value of the packet or connection mark.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis>mask</emphasis></term>

              <listitem>
                <para>A mask to be applied to the mark before testing.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">:C</emphasis></term>

              <listitem>
                <para>Designates a connection mark. If omitted, the packet
                mark's value is tested.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">USER/GROUP</emphasis> (Optional) -
        [<emphasis
        role="bold">!</emphasis>][<emphasis>user-name-or-number</emphasis>][<emphasis
        role="bold">:</emphasis><emphasis>group-name-or-number</emphasis>][<emphasis
        role="bold">+</emphasis><emphasis>program-name</emphasis>]</term>

        <listitem>
          <para>Only locally-generated connections will match if this column
          is non-empty.</para>

          <para>When this column is non-empty, the rule matches only if the
          program generating the output is running under the effective
          <emphasis>user</emphasis> and/or <emphasis>group</emphasis>
          specified (or is NOT running under that id if "!" is given).</para>

          <para>Examples:</para>

          <variablelist>
            <varlistentry>
              <term>joe</term>

              <listitem>
                <para>program must be run by joe</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>:kids</term>

              <listitem>
                <para>program must be run by a member of the 'kids'
                group</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>!:kids</term>

              <listitem>
                <para>program must not be run by a member of the 'kids'
                group</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>+upnpd</term>

              <listitem>
                <para>#program named upnpd</para>

                <important>
                  <para>The ability to specify a program name was removed from
                  Netfilter in kernel version 2.6.14.</para>
                </important>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SWITCH -
        [!]<replaceable>switch-name</replaceable>[={0|1}]</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.5.1 and allows enabling and disabling the
          rule without requiring <command>shorewall restart</command>.</para>

          <para>The rule is enabled if the value stored in
          <filename>/proc/net/nf_condition/<replaceable>switch-name</replaceable></filename>
          is 1. The rule is disabled if that file contains 0 (the default). If
          '!' is supplied, the test is inverted such that the rule is enabled
          if the file contains 0.</para>

          <para>Within the <replaceable>switch-name</replaceable>, '@0' and
          '@{0}' are replaced by the name of the chain to which the rule is a
          added. The <replaceable>switch-name</replaceable> (after '@...'
          expansion) must begin with a letter and be composed of letters,
          decimal digits, underscores or hyphens. Switch names must be 30
          characters or less in length.</para>

          <para>Switches are normally <emphasis role="bold">off</emphasis>. To
          turn a switch <emphasis role="bold">on</emphasis>:</para>

          <simplelist>
            <member><command>echo 1 &gt;
            /proc/net/nf_condition/<replaceable>switch-name</replaceable></command></member>
          </simplelist>

          <para>To turn it <emphasis role="bold">off</emphasis> again:</para>

          <simplelist>
            <member><command>echo 0 &gt;
            /proc/net/nf_condition/<replaceable>switch-name</replaceable></command></member>
          </simplelist>

          <para>Switch settings are retained over <command>shorewall
          restart</command>.</para>

          <para>Beginning with Shorewall 4.5.10, when the
          <replaceable>switch-name</replaceable> is followed by
          <option>=0</option> or <option>=1</option>, then the switch is
          initialized to off or on respectively by the
          <command>start</command> command. Other commands do not affect the
          switch setting.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ORIGINAL DEST</emphasis> (origdest) -
        [<emphasis
        role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...[<emphasis>exclusion</emphasis>]|<emphasis>exclusion</emphasis>]</term>

        <listitem>
          <para>(Optional) This column may be included and may contain one or
          more addresses (host or network) separated by commas. Address ranges
          are not allowed. When this column is supplied, rules are generated
          that require that the original destination address matches one of
          the listed addresses. It is useful for specifying that SNAT should
          occur only for connections that were acted on by a DNAT when they
          entered the firewall.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Examples</title>

    <variablelist>
      <varlistentry>
        <term>Example 1:</term>

        <listitem>
          <para>You have a simple 'masquerading' setup where eth0 connects to
          a DSL or cable modem and eth1 connects to your local network with
          subnet 2001:470:b:787::0/64</para>

          <para>Your entry in the file will be:</para>

          <programlisting>        #INTERFACE   SOURCE                  ADDRESS
        eth0         2001:470:b:787::0/64    -</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 2:</term>

        <listitem>
          <para>Your sit1 interface has two public IP addresses:
          2001:470:a:227::1 and 2001:470:b:227::1. You want to use the
          iptables statistics match to masquerade outgoing connections evenly
          between these two addresses.</para>

          <programlisting>/etc/shorewall/masq:

       #INTERFACE    SOURCE         ADDRESS 
       INLINE(sit1)  0.0.0.0/0      2001:470:a:227::1 ;  -m statistic --mode random --probability 0.50
       sit1          0.0.0.0/0      2001:470:a:227::2 
</programlisting>

          <para>If INLINE_MATCHES=Yes in <ulink
          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5),
          then these rules may be specified as follows:</para>

          <programlisting>/etc/shorewall/masq:

       #INTERFACE    SOURCE         ADDRESS 
       sit1          0.0.0.0/0      2001:470:a:227::1 ;  -m statistic --mode random --probability 0.50
       sit1          0.0.0.0/0      2001:470:a:227::2 
</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall6/masq</para>
  </refsect1>
</refentry>