shorewall_code/Shorewall-docs/NAT.htm
2002-08-22 21:21:41 +00:00

92 lines
4.0 KiB
HTML
Raw Blame History

<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>Shorewall NAT</title>
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
</head>
<body>
<blockquote>
<table border="0" cellpadding="0" cellspacing="0" style="border-collapse: collapse" width="100%" id="AutoNumber1" bgcolor="#400169" height="90">
<tr>
<td width="100%">
<h1 align="center"><font color="#FFFFFF">Static NAT</font></h1>
</td>
</tr>
</table>
<p><font color="#FF0000"><b>IMPORTANT: If all you want to do is forward
ports to servers behind your firewall, you do NOT want to use static NAT.
Port forwarding can be accomplished with simple entries in the
<a href="Documentation.htm#Rules">rules file</a>.</b></font></p>
<p>Static NAT is a way to make systems behind a
firewall and configured with private IP addresses (those
reserved for private use in RFC1918) appear to have public IP
addresses.</p>
<p>The following figure represents a static NAT
environment.</p>
<p align="center"><strong>
<img src="images/staticnat.png" width="435" height="397"></strong></p>
<blockquote>
</blockquote>
<p align="left">Static NAT can be used to make the systems with the
10.1.1.* addresses appear to be on the upper (130.252.100.*) subnet. If we
assume that the interface to the upper subnet is eth0, then the following
/etc/shorewall/NAT file would make the lower left-hand system appear to have
IP address 130.252.100.18 and the right-hand one to have IP address
130.252.100.19.</p>
<table border="2" cellpadding="2" style="border-collapse: collapse">
<tr>
<td><b>EXTERNAL</b></td>
<td><b>INTERFACE</b></td>
<td><b>INTERNAL</b></td>
<td><b>ALL INTERFACES</b></td>
<td><b>LOCAL</b></td>
</tr>
<tr>
<td>130.252.100.18</td>
<td>eth0</td>
<td>10.1.1.2</td>
<td>yes</td>
<td>yes</td>
</tr>
<tr>
<td>130.252.100.19</td>
<td>eth0</td>
<td>10.1.1.3</td>
<td>yes</td>
<td>yes</td>
</tr>
</table>
<p>Be sure that the internal system(s) (10.1.1.2 and 10.1.1.3 in the above
example) is (are) not included in any specification in /etc/shorewall/masq
or /etc/shorewall/proxyarp.</p>
<p><a name="AllInterFaces"></a>Note 1: The &quot;ALL INTERFACES&quot; column
is used to specify whether access to the external IP from all firewall
interfaces should undergo NAT (Yes or yes) or if only access from the
interface in the INTERFACE column should undergo NAT. If you leave this
column empty, &quot;Yes&quot; is assumed.&nbsp;The ALL INTERFACES column was
added in version 1.1.6.</p>
<p>Note 2: Shorewall will automatically add the external address to the
specified interface unless you specify <a href="Documentation.htm#Aliases">ADD_IP_ALIASES</a>=&quot;no&quot;
(or &quot;No&quot;) in /etc/shorewall/shorewall.conf; If you do not set
ADD_IP_ALIASES or if you set it to &quot;Yes&quot; or &quot;yes&quot; then you must NOT configure your own alias(es).</p>
<p><a name="LocalPackets"></a>Note 3: The contents of the &quot;LOCAL&quot;
column determine whether packets originating on the firewall itself and
destined for the EXTERNAL address are redirected to the internal ADDRESS. If
this column contains &quot;yes&quot; or &quot;Yes&quot; (and the ALL
INTERFACES COLUMN also contains &quot;Yes&quot; or &quot;yes&quot;) then
such packets are redirected; otherwise, such packets are not redirected. The
LOCAL column was added in version 1.1.8.</p>
</blockquote>
<blockquote>
</blockquote>
<p><font size="2">Last updated 3/27/2002 - </font><font size="2">
<a href="support.htm">Tom
Eastep</a></font> </p>
<font face="Trebuchet MS"><a href="copyright.htm"><font size="2">Copyright</font>
<EFBFBD> <font size="2">2001, 2002 Thomas M. Eastep.</font></a></font></body></html>