mirror of
https://gitlab.com/shorewall/code.git
synced 2024-12-23 22:58:52 +01:00
84029e5bd4
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@1317 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
317 lines
12 KiB
XML
317 lines
12 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
|
|
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
|
|
<article id="Shorewall_Squid_Usage">
|
|
<!--$Id$-->
|
|
|
|
<articleinfo>
|
|
<title>Using Shorewall with Squid</title>
|
|
|
|
<authorgroup>
|
|
<author>
|
|
<firstname>Tom</firstname>
|
|
|
|
<surname>Eastep</surname>
|
|
</author>
|
|
</authorgroup>
|
|
|
|
<pubdate>2004-04-19</pubdate>
|
|
|
|
<copyright>
|
|
<year>2003-2004</year>
|
|
|
|
<holder>Thomas M. Eastep</holder>
|
|
</copyright>
|
|
|
|
<legalnotice>
|
|
<para>Permission is granted to copy, distribute and/or modify this
|
|
document under the terms of the GNU Free Documentation License, Version
|
|
1.2 or any later version published by the Free Software Foundation; with
|
|
no Invariant Sections, with no Front-Cover, and with no Back-Cover
|
|
Texts. A copy of the license is included in the section entitled
|
|
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
|
|
</legalnotice>
|
|
</articleinfo>
|
|
|
|
<para></para>
|
|
|
|
<para>This page covers Shorewall configuration to use with <ulink
|
|
url="http://www.squid-cache.org">Squid</ulink> running as a Transparent
|
|
Proxy or as a Manual Proxy.</para>
|
|
|
|
<para>If you are running Shorewall 1.3, please see <ulink
|
|
url="1.3/Shorewall_Squid_Usage.html">this documentation</ulink>.</para>
|
|
|
|
<section>
|
|
<title>Squid as a Transparent Proxy</title>
|
|
|
|
<caution>
|
|
<para>Please observe the following general requirements:</para>
|
|
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>In all cases, Squid should be configured to run as a transrent
|
|
proxy as described at <ulink
|
|
url="http://tldp.org/HOWTO/mini/TransparentProxy.html">http://tldp.org/HOWTO/mini/TransparentProxy.html</ulink>.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>The following instructions mention the files
|
|
/etc/shorewall/start and /etc/shorewall/init -- if you don't
|
|
have those files, siimply create them.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>When the Squid server is in the DMZ zone or in the local zone,
|
|
that zone must be defined ONLY by its interface -- no
|
|
/etc/shorewall/hosts file entries. That is because the packets being
|
|
routed to the Squid server still have their original destination IP
|
|
addresses.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>You must have iptables installed on your Squid server.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>If you run a Shorewall version earlier than 1.4.6, you must
|
|
have NAT and MANGLE enabled in your /etc/shorewall/conf file</para>
|
|
|
|
<programlisting>NAT_ENABLED=Yes
|
|
MANGLE_ENABLED=Yes</programlisting>
|
|
</listitem>
|
|
</itemizedlist>
|
|
</caution>
|
|
</section>
|
|
|
|
<section>
|
|
<title>Configurations</title>
|
|
|
|
<para>Three different configurations are covered:</para>
|
|
|
|
<simplelist>
|
|
<member>Squid (transparent) Running on the Firewall</member>
|
|
|
|
<member>Squid (transparent) Running in the local Network</member>
|
|
|
|
<member>Squid (transparent) Running in a DMZ</member>
|
|
</simplelist>
|
|
|
|
<section id="Firewall">
|
|
<title>Squid (transparent) Running on the Firewall</title>
|
|
|
|
<para>You want to redirect all local www connection requests EXCEPT
|
|
those to your own http server (206.124.146.177) to a Squid transparent
|
|
proxy running on the firewall and listening on port 3128. Squid will of
|
|
course require access to remote web servers.</para>
|
|
|
|
<para>In <filename>/etc/shorewall/rules</filename>:</para>
|
|
|
|
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
|
|
# PORT(S) DEST
|
|
REDIRECT loc 3228 tcp www - !206.124.146.177
|
|
ACCEPT fw net tcp www</programlisting>
|
|
|
|
<para>There may be a requirement to exclude additional destination hosts
|
|
or networks from being redirected. For example, you might also want
|
|
requests destined for 130.252.100.0/24 to not be routed to Squid.</para>
|
|
|
|
<para>If you are running Shorewall version 1.4.5 or later, you may just
|
|
add the additional hosts/networks to the ORIGINAL DEST column in your
|
|
REDIRECT rule.</para>
|
|
|
|
<para><filename>/etc/shorewall/rules</filename>:<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
|
|
# PORT(S) DEST
|
|
REDIRECT loc 3228 tcp www - !206.124.146.177,130.252.100.0/24</programlisting></para>
|
|
|
|
<para>If you are running a Shorewall version earlier than 1.4.5, you
|
|
must add a manual rule in /etc/shorewall/start:</para>
|
|
|
|
<programlisting><command>run_iptables -t nat -I loc_dnat -p tcp --dport www -d 130.252.100.0/24 -j RETURN</command></programlisting>
|
|
|
|
<para>To exclude additional hosts or networks, just add additional
|
|
similar rules.</para>
|
|
</section>
|
|
|
|
<section id="Local">
|
|
<title>Squid (transparent) Running in the local network</title>
|
|
|
|
<para>You want to redirect all local www connection requests to a Squid
|
|
transparent proxy running in your local zone at 192.168.1.3 and
|
|
listening on port 3128. Your local interface is eth1. There may also be
|
|
a web server running on 192.168.1.3. It is assumed that web access is
|
|
already enabled from the local zone to the internet..</para>
|
|
|
|
<orderedlist>
|
|
<listitem>
|
|
<para>* On your firewall system, issue the following command</para>
|
|
|
|
<programlisting><command>echo 202 www.out >> /etc/iproute2/rt_tables</command></programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>In /etc/shorewall/init, put:</para>
|
|
|
|
<programlisting><command>if [ -z "`ip rule list | grep www.out`" ] ; then
|
|
ip rule add fwmark CA table www.out # Note 0xCA = 202
|
|
ip route add default via 192.168.1.3 dev eth1 table www.out
|
|
ip route flush cache
|
|
echo 0 > /proc/sys/net/ipv4/conf/eth1/send_redirects
|
|
fi</command></programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<important>
|
|
<para>If you are running Shorewall 1.4.1 or Shorewall 1.4.1a,
|
|
please upgrade to Shorewall 1.4.2 or later.</para>
|
|
</important>
|
|
|
|
<para>If you are running Shorewall 1.4.2 or later, then in
|
|
<filename>/etc/shorewall/interfaces</filename>:</para>
|
|
|
|
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
|
|
loc eth1 detect <emphasis role="bold">routeback</emphasis> </programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>In /etc/shorewall/rules:</para>
|
|
|
|
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
|
|
ACCEPT loc loc tcp www</programlisting>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem>
|
|
<para>Alternativfely, if you are running Shorewall 1.4.0 you can
|
|
have the following policy in place of the above rule.</para>
|
|
|
|
<para><filename>/etc/shorewall/policy</filename></para>
|
|
|
|
<programlisting>#SOURCE DESTINATION POLICY
|
|
loc loc ACCEPT</programlisting>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>In <filename>/etc/shorewall/start</filename> add:</para>
|
|
|
|
<programlisting><command>iptables -t mangle -A PREROUTING -i eth1 -s ! 192.168.1.3 -p tcp --dport 80 -j MARK --set-mark 202</command></programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>On 192.168.1.3, arrange for the following command to be
|
|
executed after networking has come up</para>
|
|
|
|
<programlisting><command>iptables -t nat -A PREROUTING -i eth0 -d ! 192.168.1.3 -p tcp --dport 80 -j REDIRECT --to-ports 3128</command></programlisting>
|
|
|
|
<para>If you are running RedHat on the server, you can simply
|
|
execute the following commands after you have typed the iptables
|
|
command above:</para>
|
|
|
|
<programlisting><command>iptables-save > /etc/sysconfig/iptables
|
|
chkconfig --level 35 iptables on</command></programlisting>
|
|
</listitem>
|
|
</orderedlist>
|
|
</section>
|
|
|
|
<section id="DMZ">
|
|
<title>Squid (transparent) Running in the DMZ</title>
|
|
|
|
<para>You have a single Linux system in your DMZ with IP address
|
|
192.0.2.177. You want to run both a web server and Squid on that system.
|
|
Your DMZ interface is eth1 and your local interface is eth2.</para>
|
|
|
|
<orderedlist>
|
|
<listitem>
|
|
<para>On your firewall system, issue the following command</para>
|
|
|
|
<programlisting><command>echo 202 www.out >> /etc/iproute2/rt_tables</command></programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>In /etc/shorewall/init, put:</para>
|
|
|
|
<programlisting><command>if [ -z "`ip rule list | grep www.out`" ] ; then
|
|
ip rule add fwmark CA table www.out # Note 0xCA = 202
|
|
ip route add default via 192.0.2.177 dev eth1 table www.out
|
|
ip route flush cache
|
|
fi</command></programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Do <emphasis role="bold">one</emphasis> of the following:</para>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem>
|
|
<para>In <filename>/etc/shorewall/start</filename> add</para>
|
|
|
|
<programlisting><command>iptables -t mangle -A PREROUTING -i eth2 -p tcp --dport 80 -j MARK --set-mark 202</command></programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Set MARK_IN_FORWARD_CHAIN=No in <filename>/etc/shorewall/shorewall.conf</filename>
|
|
and add the following entry in <filename>/etc/shorewall/tcrules</filename>:</para>
|
|
|
|
<programlisting>#MARK SOURCE DESTINATION PROTOCOL PORT
|
|
202 eth2 0.0.0.0 tcp 80</programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Run Shorewall 1.3.14 or later and add the following entry
|
|
in <filename>/etc/shorewall/tcrules</filename>:</para>
|
|
|
|
<programlisting>#MARK SOURCE DESTINATION PROTOCOL PORT
|
|
202:P eth2 0.0.0.0 tcp 80</programlisting>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>In <filename>/etc/shorewall/rules</filename>, you will need:</para>
|
|
|
|
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
|
|
ACCEPT loc dmz tcp 80
|
|
ACCEPT dmz net tcp 80</programlisting>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>On 192.0.2.177 (your Web/Squid server), arrange for the
|
|
following command to be executed after networking has come up</para>
|
|
|
|
<programlisting><command>iptables -t nat -A PREROUTING -i eth0 -d ! 192.0.2.177 -p tcp --dport 80 -j REDIRECT --to-ports 3128</command></programlisting>
|
|
|
|
<para>If you are running RedHat on the server, you can simply
|
|
execute the following commands after you have typed the iptables
|
|
command above:</para>
|
|
|
|
<programlisting><command>iptables-save > /etc/sysconfig/iptables
|
|
chkconfig --level 35 iptables on</command></programlisting>
|
|
</listitem>
|
|
</orderedlist>
|
|
</section>
|
|
</section>
|
|
|
|
<section>
|
|
<title>Squid as a Manual Proxy</title>
|
|
|
|
<para>Assume that Squid is running in zone SZ and listening on port SP;
|
|
all web sites that are to be accessed through Squid are in the
|
|
<quote>net</quote> zone. Then for each zone Z that needs access to the
|
|
Squid server.</para>
|
|
|
|
<para><filename>/etc/shorewall/rules</filename>:</para>
|
|
|
|
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
|
|
ACCEPT Z SZ tcp SP
|
|
ACCEPT SZ net tcp 80</programlisting>
|
|
|
|
<example>
|
|
<title>Squid on the firewall listening on port 8080 with access from the
|
|
<quote>loc</quote> zone:</title>
|
|
|
|
<para><filename>/etc/shorewall/rules:</filename><programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
|
|
ACCEPT loc fw tcp 8080
|
|
ACCEPT fw net tcp 80</programlisting></para>
|
|
</example>
|
|
</section>
|
|
</article> |