shorewall_code/Shorewall2/providers
2005-05-17 22:55:29 +00:00

57 lines
1.9 KiB
Plaintext
Executable File

##############################################################################
#
# Shorewall 2.4 -- Internet Service Providers
#
# /etc/shorewall/providers
#
# This file is used to define additional routing tables. You will
# want to define an additional table if:
#
# - You have connections to more than one ISP or multiple connections
# to the same ISP
#
# - You run Squid as a transparent proxy on a host other than the
# firewall.
#
# To omit a column, enter "-".
#
# Columns must be separated by white space and are:
#
# NAME The provider name.
#
# NUMBER The provider number -- a number between 1 and 15
#
# MARK A FWMARK value used in your /etc/shorewall/tcrules
# file to direct packets to this provider.
#
# DUPLICATE The name of an existing table to duplicate. May be
# 'main' or the name of a previous provider.
#
# INTERFACE The name of the network interface to the provider.
# Must be listed in /etc/shorewall/interfaces.
#
# GATEWAY The IP address of the provider's gateway router.
#
# OPTIONS A comma-separated list selected from the following:
#
# track If specified, connections FROM this interface are
# to be tracked so that responses may be routed back
# out this same interface.
#
# You want specify 'trask' if internet hosts will be
# connecting to local servers through this provider.
#
# default The providers that have 'default' specified will
# get outbound traffic load-balanced among them.
#
# Example: You run squid in your DMZ on IP address 192.168.2.99. Your DMZ
# interface is eth2
#
# #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS
# Squid 1 1 - eth2 192.168.2.99 -
#
# For additional information, see http://shorewall.net/NAT.htm
##############################################################################
#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE