1
0
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-23 22:58:52 +01:00
shorewall_code/manpages6/shorewall6-zones.xml
Tom Eastep 489364a1a0 Correct zone manpages re: blacklist vs zone type
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2010-09-27 13:57:03 -07:00

347 lines
13 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall6-zones</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>zones</refname>
<refpurpose>Shorewall6 zone declaration file</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall6/zones</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>The /etc/shorewall6/zones file declares your network zones. You
specify the hosts in each zone through entries in
<filename>/etc/shorewall6/interfaces</filename> or
<filename>/etc/shorewall6/hosts</filename>.</para>
<para>The columns in the file are as follows.</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">ZONE</emphasis> -
<emphasis>zone</emphasis>[<emphasis
role="bold">:</emphasis><emphasis>parent-zone</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>parent-zone</emphasis>]...]</term>
<listitem>
<para>Name of the <emphasis>zone</emphasis>. The names "all",
"none", "SOURCE" and "DEST" are reserved and may not be used as zone
names. The maximum length of a zone name is determined by the
setting of the LOGFORMAT option in <ulink
url="shorewall6.conf.html">shorewall6.conf</ulink>(5). With the
default LOGFORMAT, zone names can be at most 5 characters
long.</para>
<blockquote>
<para>The maximum length of an iptables log prefix is 29 bytes. As
explained in <ulink
url="shorewall.conf.html">shorewall6.conf</ulink> (5), the default
LOGPREFIX formatting string is “Shorewall:%s:%s:” where the first
%s is replaced by the chain name and the second is replaced by the
disposition.</para>
<itemizedlist>
<listitem>
<para>The default formatting string has 12 fixed characters
("Shorewall" and three colons).</para>
</listitem>
<listitem>
<para>The longest of the standard dispositions are ACCEPT and
REJECT which have 6 characters each.</para>
</listitem>
<listitem>
<para>The canonical name for the chain containing the rules
for traffic going from zone 1 to zone 2 is "&lt;zone
1&gt;2&lt;zone 2&gt;".</para>
</listitem>
<listitem>
<para>So if M is the maximum zone name length, such chains can
have length 2*M + 1.</para>
<simplelist>
<member>12 + 6 + 2*M + 1 = 29 which reduces to</member>
<member>2*M = 29 - 12 - 6 - 1 = 10 or</member>
<member>M = 5</member>
</simplelist>
</listitem>
</itemizedlist>
</blockquote>
<para>The order in which Shorewall6 matches addresses from packets
to zones is determined by the order of zone declarations. Where a
zone is nested in one or more other zones, you may either ensure
that the nested zone precedes its parents in this file, or you may
follow the (sub)zone name by ":" and a comma-separated list of the
parent zones. The parent zones must have been declared in earlier
records in this file. See <ulink
url="shorewall6-nesting.html">shorewall6-nesting</ulink>(5) for
additional information.</para>
<para>Example:</para>
<programlisting>#ZONE TYPE OPTIONS IN OPTIONS OUT OPTIONS
a ipv6
b ipv6
c:a,b ipv6</programlisting>
<para>Currently, Shorewall6 uses this information to reorder the
zone list so that parent zones appear after their subzones in the
list. The IMPLICIT_CONTINUE option in <ulink
url="shorewall6.conf.html">shorewall6.conf</ulink>(5) can also
create implicit CONTINUE policies to/from the subzone.</para>
<para>Where an <emphasis role="bold">ipsec</emphasis> zone is
explicitly included as a child of an <emphasis
role="bold">ipv6</emphasis> zone, the ruleset allows CONTINUE
policies (explicit or implicit) to work as expected.</para>
<para>In the future, Shorewall6 may make additional use of nesting
information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">TYPE</emphasis></term>
<listitem>
<variablelist>
<varlistentry>
<term><emphasis role="bold">ipv6</emphasis></term>
<listitem>
<para>This is the standard Shorewall6 zone type and is the
default if you leave this column empty or if you enter "-" in
the column. Communication with some zone hosts may be
encrypted. Encrypted hosts are designated using the
'ipsec'option in <ulink
url="shorewall6-hosts.html">shorewall6-hosts</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ipsec</emphasis> (or <emphasis
role="bold">ipsec6</emphasis>)</term>
<listitem>
<para>Communication with all zone hosts is encrypted. Your
kernel and ip6tables must include policy match support.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">firewall</emphasis></term>
<listitem>
<para>Designates the firewall itself. You must have exactly
one 'firewall' zone. No options are permitted with a
'firewall' zone. The name that you enter in the ZONE column
will be stored in the shell variable $FW which you may use in
other configuration files to designate the firewall
zone.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">bport</emphasis> (or <emphasis
role="bold">bport6</emphasis>)</term>
<listitem>
<para>The zone is associated with one or more ports on a
single bridge.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">vserver</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.11 Beta 2 - A zone composed of
Linux-vserver guests. The zone contents must be defined in
<ulink url="shorewall-hosts.html">shorewall-hosts</ulink>
(5).</para>
<para>Vserver zones are implicitly handled as subzones of the
firewall zone.</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">OPTIONS, IN OPTIONS and OUT
OPTIONS</emphasis> - [<emphasis>option</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>
<listitem>
<para>A comma-separated list of options. With the exception of the
<option>mss</option> and <option>blacklist</option> options, these
only apply to TYPE <option>ipsec</option> zones.</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">blacklist</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.13. May not be specified for
<emphasis role="bold">firewall</emphasis> or <emphasis
role="bold">vserver</emphasis> zones.</para>
<para>When specified in the IN_OPTIONS column, causes all
traffic from this zone to be passed against the <emphasis
role="bold">src</emphasis> entries in s<ulink
url="shorewall6-blacklist.html">horewall6-blacklist</ulink>(5).</para>
<para>When specified in the OUT_OPTIONS column, causes all
traffic to this zone to be passed against the <emphasis
role="bold">dst</emphasis> entries in s<ulink
url="shorewall6-blacklist.html">horewall6-blacklist</ulink>(5).</para>
<para>Specifying this option in the OPTIONS column is
equivalent to entering it in both of the IN_OPTIONS and
OUT_OPTIONS column.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">reqid=</emphasis><emphasis>number</emphasis></term>
<listitem>
<para>where <emphasis>number</emphasis> is specified using
setkey(8) using the 'unique:<emphasis>number</emphasis> option
for the SPD level.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">spi=</emphasis>&lt;number&gt;</term>
<listitem>
<para>where <emphasis>number</emphasis> is the SPI of the SA
used to encrypt/decrypt packets.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">proto=</emphasis><emphasis
role="bold">ah</emphasis>|<emphasis
role="bold">esp</emphasis>|<emphasis
role="bold">ipcomp</emphasis></term>
<listitem>
<para>IPSEC Encapsulation Protocol</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">mss=</emphasis><emphasis>number</emphasis></term>
<listitem>
<para>sets the MSS field in TCP packets. If you supply this
option, you should also set FASTACCEPT=No in <ulink
url="shorewall6.conf.html">shorewall6.conf</ulink>(5) to
insure that both the SYN and SYN,ACK packets have their MSS
field adjusted.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">mode=</emphasis><emphasis
role="bold">transport</emphasis>|<emphasis
role="bold">tunnel</emphasis></term>
<listitem>
<para>IPSEC mode</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">tunnel-src=</emphasis><emphasis>address</emphasis>[/<emphasis>mask</emphasis>]</term>
<listitem>
<para>only available with mode=tunnel</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">tunnel-dst=</emphasis><emphasis>address</emphasis>[/<emphasis>mask</emphasis>]</term>
<listitem>
<para>only available with mode=tunnel</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">strict</emphasis></term>
<listitem>
<para>Means that packets must match all rules.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">next</emphasis></term>
<listitem>
<para>Separates rules; can only be used with strict</para>
</listitem>
</varlistentry>
</variablelist>
<para>The options in the OPTIONS column are applied to both incoming
and outgoing traffic. The IN OPTIONS are applied to incoming traffic
(in addition to OPTIONS) and the OUT OPTIONS are applied to outgoing
traffic.</para>
<para>If you wish to leave a column empty but need to make an entry
in a following column, use "-".</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall6/zones</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="http://www.shorewall.net/Multiple_Zones.html">http://www.shorewall.net/Multiple_Zones.html</ulink>.</para>
<para>shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5),
shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5),
shorewall6-maclist(5), shorewall6-nesting(8), shorewall6-params(5),
shorewall6-policy(5), shorewall6-providers(5), shorewall6-route_rules(5),
shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5),
shorewall6-secmarks(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5),
shorewall6-tcrules(5), shorewall6-tos(5), shorewall6-tunnels(5)</para>
</refsect1>
</refentry>