shorewall_code/Shorewall/Perl/prog.header
Tom Eastep afbb93ca8a More changes having to do with with dynamic chains
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2010-06-07 13:16:25 -07:00

872 lines
19 KiB
Bash

#!/bin/sh
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 1999-2010 - Tom Eastep (teastep@shorewall.net)
#
# Options are:
#
# -n Don't alter Routing
# -v and -q Standard Shorewall Verbosity control
# -t Timestamp progress messages
# -p Purge conntrack table
# -r Recover from failed start/restart
# -V <verbosity> Set verbosity level explicitly
# -R <restore> Overrides RESTOREFILE setting
#
# Commands are:
#
# start Starts the firewall
# refresh Refresh the firewall
# restart Restarts the firewall
# reload Reload the firewall
# clear Removes all firewall rules
# stop Stops the firewall
# status Displays firewall status
# version Displays the version of Shorewall that
# generated this program
#
################################################################################
# Functions imported from /usr/share/shorewall/prog.header
################################################################################
#
# Conditionally produce message
#
progress_message() # $* = Message
{
local timestamp
timestamp=
if [ $VERBOSITY -gt 1 ]; then
[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
echo "${timestamp}$@"
fi
if [ $LOG_VERBOSITY -gt 1 ]; then
timestamp="$(date +'%b %_d %T') "
echo "${timestamp}$@" >> $STARTUP_LOG
fi
}
progress_message2() # $* = Message
{
local timestamp
timestamp=
if [ $VERBOSITY -gt 0 ]; then
[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
echo "${timestamp}$@"
fi
if [ $LOG_VERBOSITY -gt 0 ]; then
timestamp="$(date +'%b %_d %T') "
echo "${timestamp}$@" >> $STARTUP_LOG
fi
}
progress_message3() # $* = Message
{
local timestamp
timestamp=
if [ $VERBOSITY -ge 0 ]; then
[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
echo "${timestamp}$@"
fi
if [ $LOG_VERBOSITY -ge 0 ]; then
timestamp="$(date +'%b %_d %T') "
echo "${timestamp}$@" >> $STARTUP_LOG
fi
}
#
# Set a standard chain's policy
#
setpolicy() # $1 = name of chain, $2 = policy
{
run_iptables -P $1 $2
}
#
# Set a standard chain to enable established and related connections
#
setcontinue() # $1 = name of chain
{
run_iptables -A $1 -m state --state ESTABLISHED,RELATED -j ACCEPT
}
#
# Flush one of the NAT table chains
#
flushnat() # $1 = name of chain
{
run_iptables -t nat -F $1
}
#
# Flush one of the Mangle table chains
#
flushmangle() # $1 = name of chain
{
run_iptables -t mangle -F $1
}
#
# Flush and delete all user-defined chains in the filter table
#
deleteallchains() {
run_iptables -F
run_iptables -X
}
#
# Generate a list of all network interfaces on the system
#
find_all_interfaces() {
${IP:-ip} link list | egrep '^[[:digit:]]+:' | cut -d ' ' -f2 | sed 's/:$//'
}
#
# Find the value 'dev' in the passed arguments then echo the next value
#
find_device() {
while [ $# -gt 1 ]; do
[ "x$1" = xdev ] && echo $2 && return
shift
done
}
#
# Find the value 'via' in the passed arguments then echo the next value
#
find_gateway() {
while [ $# -gt 1 ]; do
[ "x$1" = xvia ] && echo $2 && return
shift
done
}
#
# Find the value 'mtu' in the passed arguments then echo the next value
#
find_mtu() {
while [ $# -gt 1 ]; do
[ "x$1" = xmtu ] && echo $2 && return
shift
done
}
#
# Find the value 'peer' in the passed arguments then echo the next value up to
# "/"
#
find_peer() {
while [ $# -gt 1 ]; do
[ "x$1" = xpeer ] && echo ${2%/*} && return
shift
done
}
#
# Find the interfaces that have a route to the passed address - the default
# route is not used.
#
find_rt_interface() {
$IP -4 route list | while read addr rest; do
case $addr in
*/*)
in_network ${1%/*} $addr && echo $(find_device $rest)
;;
default)
;;
*)
if [ "$addr" = "$1" -o "$addr/32" = "$1" ]; then
echo $(find_device $rest)
fi
;;
esac
done
}
#
# Try to find the gateway through an interface looking for 'nexthop'
find_nexthop() # $1 = interface
{
echo $(find_gateway `$IP -4 route list | grep "[[:space:]]nexthop.* $1"`)
}
#
# Find the default route's interface
#
find_default_interface() {
$IP -4 route list | while read first rest; do
[ "$first" = default ] && echo $(find_device $rest) && return
done
}
#
# Echo the name of the interface(s) that will be used to send to the
# passed address
#
find_interface_by_address() {
local dev
dev="$(find_rt_interface $1)"
local first
local rest
[ -z "$dev" ] && dev=$(find_default_interface)
[ -n "$dev" ] && echo $dev
}
#
# Determine if Interface is up
#
interface_is_up() {
[ -n "$($IP link list dev $1 2> /dev/null | grep -e '[<,]UP[,>]')" ]
}
#
# Determine if interface is usable from a Netfilter prespective
#
interface_is_usable() # $1 = interface
{
[ "$1" = lo ] && return 0
interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != 0.0.0.0 ] && run_isusable_exit $1
}
#
# Find interface addresses--returns the set of addresses assigned to the passed
# device
#
find_interface_addresses() # $1 = interface
{
$IP -f inet addr show $1 2> /dev/null | grep inet\ | sed 's/\s*inet //;s/\/.*//;s/ peer.*//'
}
#
# echo the list of networks routed out of a given interface
#
get_routed_networks() # $1 = interface name, $2-n = Fatal error message
{
local address
local rest
$IP -4 route show dev $1 2> /dev/null |
while read address rest; do
case "$address" in
default)
if [ $# -gt 1 ]; then
shift
fatal_error "$@"
else
echo "WARNING: default route ignored on interface $1" >&2
fi
;;
multicast|broadcast|prohibit|nat|throw|nexthop)
;;
*)
[ "$address" = "${address%/*}" ] && address="${address}/32"
echo $address
;;
esac
done
}
#
# Get the broadcast addresses associated with an interface
#
get_interface_bcasts() # $1 = interface
{
local addresses
addresses=
$IP -f inet addr show dev $1 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
}
#
# Delete IP address
#
del_ip_addr() # $1 = address, $2 = interface
{
[ $(find_first_interface_address_if_any $2) = $1 ] || qt $IP addr del $1 dev $2
}
# Add IP Aliases
#
add_ip_aliases() # $* = List of addresses
{
local local
local addresses
local external
local interface
local inet
local cidr
local rest
local val
local arping
arping=$(mywhich arping)
address_details()
{
#
# Folks feel uneasy if they don't see all of the same
# decoration on these IP addresses that they see when their
# distro's net config tool adds them. In an attempt to reduce
# the anxiety level, we have the following code which sets
# the VLSM and BRD from an existing address in the same networks
#
# Get all of the lines that contain inet addresses with broadcast
#
$IP -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | while read inet cidr rest ; do
case $cidr in
*/*)
if in_network $external $cidr; then
echo "/${cidr#*/} brd $(broadcastaddress $cidr)"
break
fi
;;
esac
done
}
do_one()
{
val=$(address_details)
$IP addr add ${external}${val} dev $interface $label
[ -n "$arping" ] && qt $arping -U -c 2 -I $interface $external
echo "$external $interface" >> $VARDIR/nat
[ -n "$label" ] && label="with $label"
progress_message " IP Address $external added to interface $interface $label"
}
progress_message "Adding IP Addresses..."
while [ $# -gt 0 ]; do
external=$1
interface=$2
label=
if [ "$interface" != "${interface%:*}" ]; then
label="${interface#*:}"
interface="${interface%:*}"
label="label $interface:$label"
fi
shift 2
list_search $external $(find_interface_addresses $interface) || do_one
done
}
#
# Detect the gateway through a PPP or DHCP-configured interface
#
detect_dynamic_gateway() { # $1 = interface
local interface
interface=$1
local GATEWAYS
GATEWAYS=
local gateway
gateway=$(run_findgw_exit $1);
if [ -z "$gateway" ]; then
gateway=$( find_peer $($IP addr list $interface ) )
fi
if [ -z "$gateway" -a -f /var/lib/dhcpcd/dhcpcd-${1}.info ]; then
eval $(grep ^GATEWAYS= /var/lib/dhcpcd/dhcpcd-${1}.info 2> /dev/null)
[ -n "$GATEWAYS" ] && GATEWAYS=${GATEWAYS%,*} && gateway=$GATEWAYS
fi
if [ -z "$gateway" -a -f /var/lib/dhcp/dhclient-${1}.lease ]; then
gateway=$(grep 'option routers' /var/lib/dhcp/dhclient-${1}.lease | tail -n 1 | while read j1 j2 gateway; do echo $gateway ; return 0; done)
fi
[ -n "$gateway" ] && echo $gateway
}
#
# Detect the gateway through an interface
#
detect_gateway() # $1 = interface
{
local interface
interface=$1
local gateway
#
# First assume that this is some sort of dynamic interface
#
gateway=$( detect_dynamic_gateway $interface )
#
# Maybe there's a default route through this gateway already
#
[ -n "$gateway" ] || gateway=$(find_gateway $($IP -4 route list dev $interface | grep ^default))
#
# Last hope -- is there a load-balancing route through the interface?
#
[ -n "$gateway" ] || gateway=$(find_nexthop $interface)
#
# Be sure we found one
#
[ -n "$gateway" ] && echo $gateway
}
#
# Disable IPV6
#
disable_ipv6() {
local foo
foo="$($IP -f inet6 addr list 2> /dev/null)"
if [ -n "$foo" ]; then
if [ -x "$IP6TABLES" ]; then
$IP6TABLES -P FORWARD DROP
$IP6TABLES -P INPUT DROP
$IP6TABLES -P OUTPUT DROP
$IP6TABLES -F
$IP6TABLES -X
$IP6TABLES -A OUTPUT -o lo -j ACCEPT
$IP6TABLES -A INPUT -i lo -j ACCEPT
else
error_message "WARNING: DISABLE_IPV6=Yes in shorewall.conf but this system does not appear to have ip6tables"
fi
fi
}
#
# Clear the current traffic shaping configuration
#
delete_tc1()
{
clear_one_tc() {
$TC qdisc del dev $1 root 2> /dev/null
$TC qdisc del dev $1 ingress 2> /dev/null
}
run_tcclear_exit
run_ip link list | \
while read inx interface details; do
case $inx in
[0-9]*)
clear_one_tc ${interface%:}
;;
*)
;;
esac
done
}
#
# Detect a device's MTU -- echos the passed device's MTU
#
get_device_mtu() # $1 = device
{
local output
output="$($IP link list dev $1 2> /dev/null)" # quotes required for /bin/ash
if [ -n "$output" ]; then
echo $(find_mtu $output)
else
echo 1500
fi
}
#
# Version of the above that doesn't generate any output for MTU 1500.
# Generates 'mtu <mtu+>' otherwise, where <mtu+> is the device's MTU + 100
#
get_device_mtu1() # $1 = device
{
local output
output="$($IP link list dev $1 2> /dev/null)" # quotes required for /bin/ash
local mtu
if [ -n "$output" ]; then
mtu=$(find_mtu $output)
if [ -n "$mtu" ]; then
[ $mtu = 1500 ] || echo mtu $(($mtu + 100))
fi
fi
}
#
# Undo changes to routing
#
undo_routing() {
if [ -z "$g_noroutes" ]; then
#
# Restore rt_tables database
#
if [ -f ${VARDIR}/rt_tables ]; then
[ -w /etc/iproute2/rt_table -a -z "$KEEP_RT_TABLES" ] && cp -f ${VARDIR}/rt_tables /etc/iproute2/ && progress_message "/etc/iproute2/rt_tables database restored"
rm -f ${VARDIR}/rt_tables
fi
#
# Restore the rest of the routing table
#
if [ -f ${VARDIR}/undo_routing ]; then
. ${VARDIR}/undo_routing
progress_message "Shorewall-generated routing tables and routing rules removed"
rm -f ${VARDIR}/undo_routing
fi
fi
}
#
# Restore the default route that was in place before the initial 'shorewall start'
#
restore_default_route() {
if [ -z "$g_noroutes" -a -f ${VARDIR}/default_route ]; then
local default_route
default_route=
local route
local result
result=1
while read route ; do
case $route in
default*)
if [ -n "$default_route" ]; then
case "$default_route" in
*metric*)
#
# Don't restore a route with a metric -- we only replace the one with metric == 0
#
qt $IP -4 route delete default metric 0 && \
progress_message "Default Route with metric 0 deleted"
;;
*)
qt $IP -4 route replace $default_route && \
result=0 && \
progress_message "Default Route (${default_route# }) restored"
;;
esac
break
fi
default_route="$default_route $route"
;;
*)
default_route="$default_route $route"
;;
esac
done < ${VARDIR}/default_route
rm -f ${VARDIR}/default_route
fi
return $result
}
#
# Determine the MAC address of the passed IP through the passed interface
#
find_mac() # $1 = IP address, $2 = interface
{
if interface_is_usable $2 ; then
qt ping -nc 1 -t 2 -I $2 $1
local result
result=$($IP neigh list | awk "/^$1 / {print \$5}")
case $result in
\<*\>)
;;
*)
[ -n "$result" ] && echo $result
;;
esac
fi
}
#
# Flush the conntrack table if $g_purge is non-empty
#
conditionally_flush_conntrack() {
if [ -n "$g_purge" ]; then
if [ -n $(mywhich conntrack) ]; then
conntrack -F
else
error_message "WARNING: The '-p' option requires the conntrack utility which does not appear to be installed on this system"
fi
fi
}
#
# Clear Proxy Arp
#
delete_proxyarp() {
if [ -f ${VARDIR}/proxyarp ]; then
while read address interface external haveroute; do
qt arp -i $external -d $address pub
[ -z "${haveroute}${g_noroutes}" ] && qt $IP -4 route del $address dev $interface
f=/proc/sys/net/ipv4/conf/$interface/proxy_arp
[ -f $f ] && echo 0 > $f
done < ${VARDIR}/proxyarp
fi
rm -f ${VARDIR}/proxyarp
}
#
# Remove all Shorewall-added rules
#
clear_firewall() {
stop_firewall
setpolicy INPUT ACCEPT
setpolicy FORWARD ACCEPT
setpolicy OUTPUT ACCEPT
run_iptables -F
echo 1 > /proc/sys/net/ipv4/ip_forward
if [ -n "$DISABLE_IPV6" ]; then
if [ -x $IP6TABLES ]; then
$IP6TABLES -P INPUT ACCEPT 2> /dev/null
$IP6TABLES -P OUTPUT ACCEPT 2> /dev/null
$IP6TABLES -P FORWARD ACCEPT 2> /dev/null
fi
fi
run_clear_exit
set_state "Cleared"
logger -p kern.info "$g_product Cleared"
}
#
# Issue a message and stop/restore the firewall
#
fatal_error()
{
echo " ERROR: $@" >&2
if [ $LOG_VERBOSITY -ge 0 ]; then
timestamp="$(date +'%_b %d %T') "
echo "${timestamp} ERROR: $@" >> $STARTUP_LOG
fi
stop_firewall
[ -n "$TEMPFILE" ] && rm -f $TEMPFILE
exit 2
}
#
# Issue a message and stop
#
startup_error() # $* = Error Message
{
echo " ERROR: $@: Firewall state not changed" >&2
if [ $LOG_VERBOSITY -ge 0 ]; then
timestamp="$(date +'%_b %d %T') "
echo "${timestamp} ERROR: $@" >> $STARTUP_LOG
fi
case $COMMAND in
start)
logger -p kern.err "ERROR:$g_product start failed:Firewall state not changed"
;;
restart)
logger -p kern.err "ERROR:$g_product restart failed:Firewall state not changed"
;;
restore)
logger -p kern.err "ERROR:$g_product restore failed:Firewall state not changed"
;;
esac
if [ $LOG_VERBOSITY -gt 1 ]; then
timestamp="$(date +'%_b %d %T') "
case $COMMAND in
start)
echo "${timestamp} ERROR:$g_product start failed:Firewall state not changed" >> $STARTUP_LOG
;;
restart)
echo "${timestamp} ERROR:$g_product restart failed:Firewall state not changed" >> $STARTUP_LOG
;;
restore)
echo "${timestamp} ERROR:$g_product restore failed:Firewall state not changed" >> $STARTUP_LOG
;;
esac
fi
kill $$
exit 2
}
#
# Run iptables and if an error occurs, stop/restore the firewall
#
run_iptables()
{
local status
while [ 1 ]; do
$IPTABLES $@
status=$?
[ $status -ne 4 ] && break
done
if [ $status -ne 0 ]; then
error_message "ERROR: Command \"$IPTABLES $@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run iptables retrying exit status 4
#
do_iptables()
{
local status
while [ 1 ]; do
$IPTABLES $@
status=$?
[ $status -ne 4 ] && return $status;
done
}
#
# Run iptables and if an error occurs, stop/restore the firewall
#
run_ip()
{
if ! $IP -4 $@; then
error_message "ERROR: Command \"$IP -4 $@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run tc and if an error occurs, stop/restore the firewall
#
run_tc() {
if ! $TC $@ ; then
error_message "ERROR: Command \"$TC $@\" Failed"
stop_firewall
exit 2
fi
}
#
# Get a list of all configured broadcast addresses on the system
#
get_all_bcasts()
{
$IP -f inet addr show 2> /dev/null | grep 'inet.*brd' | grep -v '/32 ' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
}
#
# Run the .iptables_restore_input as a set of discrete iptables commands
#
debug_restore_input() {
local first second rest table chain
#
# Clear the ruleset
#
qt1 $IPTABLES -t mangle -F
qt1 $IPTABLES -t mangle -X
for chain in PREROUTING INPUT FORWARD POSTROUTING; do
qt1 $IPTABLES -t mangle -P $chain ACCEPT
done
qt1 $IPTABLES -t raw -F
qt1 $IPTABLES -t raw -X
for chain in PREROUTING OUTPUT; do
qt1 $IPTABLES -t raw -P $chain ACCEPT
done
run_iptables -t nat -F
run_iptables -t nat -X
for chain in PREROUTING POSTROUTING OUTPUT; do
qt1 $IPTABLES -t nat -P $chain ACCEPT
done
qt1 $IPTABLES -t filter -F
qt1 $IPTABLES -t filter -X
for chain in INPUT FORWARD OUTPUT; do
qt1 $IPTABLES -t filter -P $chain -P ACCEPT
done
while read first second rest; do
case $first in
-*)
#
# We can't call run_iptables() here because the rules may contain quoted strings
#
eval $IPTABLES -t $table $first $second $rest
if [ $? -ne 0 ]; then
error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
stop_firewall
exit 2
fi
;;
:*)
chain=${first#:}
if [ "x$second" = x- ]; then
do_iptables -t $table -N $chain
else
do_iptables -t $table -P $chain $second
fi
if [ $? -ne 0 ]; then
error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
stop_firewall
exit 2
fi
;;
#
# This grotesque hack with the table names works around a bug/feature with ash
#
'*'raw)
table=raw
;;
'*'mangle)
table=mangle
;;
'*'nat)
table=nat
;;
'*'filter)
table=filter
;;
esac
done
}
################################################################################
# End of functions in /usr/share/shorewall/prog.header
################################################################################