shorewall_code/Shorewall6/manpages/shorewall6-netmap.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall6-netmap</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>netmap</refname>

    <refpurpose>Shorewall6 NETMAP definition file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/netmap</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>This file is used to map addresses in one network to corresponding
    addresses in a second network. It was added in Shorewall6
    4.4.23.3.</para>

    <warning>
      <para>To use this file, your kernel and ip6tables must have RAWPOST
      table support included.</para>
    </warning>

    <para>The columns in the file are as follows (where the column name is
    followed by a different name in parentheses, the different name is used in
    the alternate specification syntax).</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">TYPE</emphasis> - <emphasis
        role="bold">{DNAT</emphasis>|<emphasis
        role="bold">SNAT}:{P|O|T}</emphasis></term>

        <listitem>
          <para>Must be DNAT or SNAT followed by :P, :O or :T to perform
          <firstterm>stateless NAT</firstterm>. Stateless NAT requires
          <firstterm>Rawpost Table support</firstterm> in your kernel and
          iptables (see the output of <command>shorewall6 show
          capabilities</command>).</para>

          <para>If DNAT:P, traffic entering INTERFACE and addressed to NET1
          has its destination address rewritten to the corresponding address
          in NET2.</para>

          <para>If SNAT:T, traffic leaving INTERFACE with a source address in
          NET1 has it's source address rewritten to the corresponding address
          in NET2.</para>

          <para>If DNAT:O, traffic originating on the firewall and leaving via
          INTERFACE and addressed to NET1 has its destination address
          rewritten to the corresponding address in NET2.</para>

          <para>If DNAT:P, traffic entering via INTERFACE and addressed to
          NET1 has its destination address rewritten to the corresponding
          address in NET2.</para>

          <para>If SNAT:P, traffic entering via INTERFACE with a destination
          address in NET1 has it's source address rewritten to the
          corresponding address in NET2.</para>

          <para>If SNAT:O, traffic originating on the firewall and leaving via
          INTERFACE with a source address in NET1 has it's source address
          rewritten to the corresponding address in NET2.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">NET1</emphasis> -
        <emphasis>network-address</emphasis></term>

        <listitem>
          <para>Network in CIDR format (e.g., 2001:470:b:227/64). Beginning in
          Shorewall6 4.4.24, <ulink
          url="shorewall6-exclusion.html">exclusion</ulink> is
          supported.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">INTERFACE</emphasis> -
        <emphasis>interface</emphasis></term>

        <listitem>
          <para>The name of a network interface. The interface must be defined
          in <ulink
          url="shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5).
          Shorewall allows loose matches to wildcard entries in <ulink
          url="shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5).
          For example, <filename class="devicefile">ppp0</filename> in this
          file will match a <ulink
          url="shorewall6-interfaces.html">shorewall6-interfaces</ulink>(8)
          entry that defines <filename
          class="devicefile">ppp+</filename>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">NET2</emphasis> -
        <emphasis>network-address</emphasis></term>

        <listitem>
          <para>Network in CIDR format</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">NET3</emphasis> -
        <emphasis>network-address</emphasis></term>

        <listitem>
          <para>Optional - added in Shorewall 4.4.11. If specified, qualifies
          INTERFACE. It specifies a SOURCE network for DNAT rules and a
          DESTINATION network for SNAT rules.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">PROTO (Optional</emphasis> -
        <emphasis>protocol-number-or-name</emphasis></term>

        <listitem>
          <para>Only packets specifying this protocol will have their IP
          header modified.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DEST PORT(S)</emphasis> (dport) -
        <emphasis>port-number-or-name-list</emphasis></term>

        <listitem>
          <para>Destination Ports. An optional comma-separated list of Port
          names (from services(5)), <emphasis>port number</emphasis>s or
          <emphasis>port range</emphasis>s; if the protocol is <emphasis
          role="bold">icmp</emphasis>, this column is interpreted as the
          destination icmp-type(s). ICMP types may be specified as a numeric
          type, a numeric type and code separated by a slash (e.g., 3/4), or
          a typename. See <ulink
          url="http://www.shorewall.net/configuration_file_basics.htm#ICMP">http://www.shorewall.net/configuration_file_basics.htm#ICMP</ulink>.</para>

          <para>If the protocol is <emphasis role="bold">ipp2p</emphasis>,
          this column is interpreted as an ipp2p option without the leading
          "--" (example <emphasis role="bold">bit</emphasis> for bit-torrent).
          If no PORT is given, <emphasis role="bold">ipp2p</emphasis> is
          assumed.</para>

          <para>An entry in this field requires that the PROTO column specify
          icmp (1), tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if
          any of the following field is supplied.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SOURCE PORT(S)</emphasis> (sport) -
        <emphasis>port-number-or-name-list</emphasis></term>

        <listitem>
          <para>Optional source port(s). If omitted, any source port is
          acceptable. Specified as a comma-separated list of port names, port
          numbers or port ranges.</para>

          <para>An entry in this field requires that the PROTO column specify
          tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if any of
          the following fields is supplied.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/netmap</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://shorewall.net/netmap.html">http://shorewall.net/netmap.html</ulink></para>

    <para><ulink
    url="http://shorewall.net/configuration_file_basics.htm#Pairs">http://shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
  </refsect1>
</refentry>