shorewall_code/Shorewall/nat
judas_iscariote 19a248d750 1. remove svn:executable property of some files.
2. put the French docs in it's own branch.



git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@3609 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2006-03-01 02:00:43 +00:00

47 lines
1.7 KiB
Plaintext

#
# Shorewall version 3.2 - Nat File
#
# /etc/shorewall/nat
#
# This file is used to define one-to-one Network Address Translation
# (NAT).
#
# WARNING: If all you want to do is simple port forwarding, do NOT use this
# file. See http://www.shorewall.net/FAQ.htm#faq1. Also, in most
# cases, Proxy ARP is a better solution that one-to-one NAT.
#
# Columns are:
#
# EXTERNAL External IP Address - this should NOT be the primary
# IP address of the interface named in the next
# column and must not be a DNS Name.
#
# INTERFACE Interface that you want to EXTERNAL address to appear
# on. If ADD_IP_ALIASES=Yes in shorewall.conf, you may
# follow the interface name with ":" and a digit to
# indicate that you want Shorewall to add the alias
# with this name (e.g., "eth0:0"). That allows you to
# see the alias with ifconfig. THAT IS THE ONLY THING
# THAT THIS NAME IS GOOD FOR -- YOU CANNOT USE IT
# ANYWHERE ELSE IN YOUR SHORWALL CONFIGURATION.
#
# If you want to override ADD_IP_ALIASES=Yes for a
# particular entry, follow the interface name with
# ":" and no digit (e.g., "eth0:").
# INTERNAL Internal Address (must not be a DNS Name).
#
# ALL INTERFACES If Yes or yes, NAT will be effective from all hosts.
# If No or no (or left empty) then NAT will be effective
# only through the interface named in the INTERFACE
# column
#
# LOCAL If Yes or yes, NAT will be effective from the firewall
# system
#
# For additional information, see http://shorewall.net/NAT.htm
#
###############################################################################
#EXTERNAL INTERFACE INTERNAL ALL LOCAL
# INTERFACES
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE