mirror of
https://gitlab.com/shorewall/code.git
synced 2024-11-30 03:23:47 +01:00
f404c75b2f
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@543 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
90 lines
2.4 KiB
Plaintext
90 lines
2.4 KiB
Plaintext
#
|
|
# Shorewall 1.4 - /etc/shorewall/tunnels
|
|
#
|
|
# This file defines IPSEC, GRE, IPIP and OPENVPN tunnels.
|
|
#
|
|
# IPIP, GRE and OPENVPN tunnels must be configured on the
|
|
# firewall/gateway itself. IPSEC endpoints may be defined
|
|
# on the firewall/gateway or on an internal system.
|
|
#
|
|
# The columns are:
|
|
#
|
|
# TYPE -- must start in column 1 and be "ipsec", "ipsecnat","ip"
|
|
# "gre", "6to4", "pptpclient", "pptpserver" or "openvpn".
|
|
#
|
|
# If type is "openvpn", it may optionally be followed
|
|
# by ":" and the port number used by the tunnel. if no
|
|
# ":" and port number are included, then the default port
|
|
# of 5000 will be used
|
|
#
|
|
# ZONE -- The zone of the physical interface through which
|
|
# tunnel traffic passes. This is normally your internet
|
|
# zone.
|
|
#
|
|
# GATEWAY -- The IP address of the remote tunnel gateway. If the
|
|
# remote getway has no fixed address (Road Warrior)
|
|
# then specify the gateway as 0.0.0.0/0.
|
|
#
|
|
# GATEWAY
|
|
# ZONES -- Optional. If the gateway system specified in the third
|
|
# column is a standalone host then this column should
|
|
# contain a comma-separated list of the names of the
|
|
# zones that the host might be in. This column only
|
|
# applies to IPSEC tunnels.
|
|
#
|
|
# Example 1:
|
|
#
|
|
# IPSec tunnel. The remote gateway is 4.33.99.124 and
|
|
# the remote subnet is 192.168.9.0/24
|
|
#
|
|
# ipsec net 4.33.99.124
|
|
#
|
|
# Example 2:
|
|
#
|
|
# Road Warrior (LapTop that may connect from anywhere)
|
|
# where the "gw" zone is used to represent the remote
|
|
# LapTop.
|
|
#
|
|
# ipsec net 0.0.0.0/0 gw
|
|
#
|
|
# Example 3:
|
|
#
|
|
# Host 4.33.99.124 is a standalone system connected
|
|
# via an ipsec tunnel to the firewall system. The host
|
|
# is in zone gw.
|
|
#
|
|
# ipsec net 4.33.99.124 gw
|
|
#
|
|
# Example 4:
|
|
#
|
|
# Road Warriors that may belong to zones vpn1, vpn2 or
|
|
# vpn3. The FreeS/Wan _updown script will add the
|
|
# host to the appropriate zone using the "shorewall add"
|
|
# command on connect and will remove the host from the
|
|
# zone at disconnect time.
|
|
#
|
|
# ipsec net 0.0.0.0/0 vpn1,vpn2,vpn3
|
|
#
|
|
# Example 5:
|
|
#
|
|
# You run the Linux PPTP client on your firewall and
|
|
# connect to server 192.0.2.221.
|
|
#
|
|
# pptpclient net 192.0.2.221
|
|
#
|
|
# Example 6:
|
|
#
|
|
# You run a PPTP server on your firewall.
|
|
#
|
|
# pptpserver net
|
|
#
|
|
# Example 7:
|
|
#
|
|
# OPENVPN tunnel. The remote gateway is 4.33.99.124 and
|
|
# openvpn uses port 7777.
|
|
#
|
|
# openvpn:7777 net 4.33.99.124
|
|
#
|
|
# TYPE ZONE GATEWAY GATEWAY ZONE PORT
|
|
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
|