shorewall_code/manpages/shorewall-route_rules.xml

<?xml version="1.0" encoding="UTF-8"?>
<refentry>
  <refmeta>
    <refentrytitle>shorewall-route_rules</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>route_rules</refname>

    <refpurpose>Shorewall Routing Rules file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/route_rules</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para> Entries in this file cause traffic to be routed to one of the
    providers listed in shorewall-providers(5).</para>

    <para>The columns in the file are as follows.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">SOURCE</emphasis> (Optional)</term>

        <listitem>
          <para>An ip address (network or host) that matches the source IP
          address in a packet. May also be specified as an interface name
          optionally followed by ":" and an address. If the device <emphasis
          role="bold">lo</emphasis> is specified, the packet must originate
          from the firewall itself.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term> <emphasis role="bold">DEST</emphasis> (Optional)</term>

        <listitem>
          <para>An ip address (network or host) that matches the destination
          IP address in a packet.</para>

          <para>If you choose to omit either <emphasis
          role="bold">SOURCE</emphasis> or <emphasis
          role="bold">DEST</emphasis>, place "-" in that column. Note that you
          may not omit both <emphasis role="bold">SOURCE</emphasis> and
          <emphasis role="bold">DEST</emphasis>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">PROVIDER</emphasis></term>

        <listitem>
          <para>The provider to route the traffic through. May be expressed
          either as the provider name or the provider number. May also be
          <emphasis role="bold">main</emphasis> or 254 for the main routing
          table. This can be used in combination with VPN tunnels, see example
          2 below.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">PRIORITY</emphasis></term>

        <listitem>
          <para> The rule's priority which determines the order in which the
          rules are processed.</para>

          <variablelist>
            <varlistentry>
              <term>1000-1999</term>

              <listitem>
                <para>Before Shorewall-generated 'MARK' rules</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>11000-11999</term>

              <listitem>
                <para>After 'MARK' rules but before Shorewall-generated rules
                for ISP interfaces.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>26000-26999</term>

              <listitem>
                <para>After ISP interface rules but before 'default'
                rule.</para>
              </listitem>
            </varlistentry>
          </variablelist>

          <para>Rules with equal priority are applied in the order in which
          they appear in the file.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Examples</title>

    <variablelist>
      <varlistentry>
        <term>Example 1:</term>

        <listitem>
          <para>You want all traffic coming in on eth1 to be routed to the
          ISP1 provider.</para>

          <programlisting>        #SOURCE                 DEST            PROVIDER        PRIORITY
        eth1                    -               ISP1            1000
</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 2:</term>

        <listitem>
          <para>You use OpenVPN (routed setup /tunX) in combination with
          multiple providers. In this case you have to set up a rule to ensure
          that the OpenVPN traffic is routed back through the tunX
          interface(s) rather than through any of the providers. 10.8.0.0/24
          is the subnet choosen in your OpenVPN configuration (server 10.8.0.0
          255.255.255.0).</para>

          <programlisting>         #SOURCE                 DEST            PROVIDER        PRIORITY
         -                       10.8.0.0/24     main            1000
</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/route_rules</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5),
    shorewall-ipsec(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5),
    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
  </refsect1>
</refentry>