1
0
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-30 18:19:04 +01:00
shorewall_code/docs/MAC_Validation.xml

224 lines
9.6 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article id="MAC_Validation">
<!--$Id$-->
<articleinfo>
<title>MAC Verification</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate><?dbtimestamp format="Y/m/d"?></pubdate>
<copyright>
<year>2001-2005</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation
License</ulink></quote>.</para>
</legalnotice>
</articleinfo>
<para>All traffic from an interface or from a subnet on an interface can be
verified to originate from a defined set of MAC addresses. Furthermore, each
MAC address may be optionally associated with one or more IP
addresses.</para>
<important>
<para><emphasis role="bold">MAC addresses are only visible within an
Ethernet segment so all MAC addresses used in verification must belong to
devices physically connected to one of the LANs to which your firewall is
connected.</emphasis></para>
<para><emphasis role="bold">This means what it says! MAC addresses are
only used within a LAN and never go outside of that LAN so please don't
post on the mailing list asking how to use MAC addresses of computers
connected to remote networks. The only MAC address that your firewall is
going to see from these hosts is the MAC address of your upstream
router.</emphasis></para>
</important>
<important>
<para><emphasis role="bold">Your kernel must include MAC match support
(CONFIG_IP_NF_MATCH_MAC - module name ipt_mac.o).</emphasis></para>
</important>
<important>
<para><emphasis role="bold">MAC verification is only applied to new
incoming connection requests. </emphasis></para>
</important>
<important>
<para><emphasis role="bold">DO NOT use MAC verification as your only
security measure . MAC addresses can be easily spoofed. You can use it in
combination with either <ulink url="IPSEC-2.6.html">IPSEC</ulink> or
<ulink url="OPENVPN.html">OpenVPN</ulink>.</emphasis></para>
</important>
<section id="Components">
<title>Components</title>
<para>There are six components to this facility.</para>
<orderedlist>
<listitem>
<para>The <emphasis role="bold">maclist</emphasis> interface option in
<ulink
url="manpages/shorewall-interfaces.html">/etc/shorewall/interfaces</ulink>.
When this option is specified, all new connection requests arriving on
the interface are subject to MAC verification.</para>
</listitem>
<listitem>
<para>The <emphasis role="bold">maclist</emphasis> option in <ulink
url="manpages/shorewall-hosts.html">/etc/shorewall/hosts</ulink>. When
this option is specified for a subnet, all new connection requests
from that subnet are subject to MAC verification.</para>
</listitem>
<listitem>
<para>The /etc/shorewall/maclist file. This file is used to associate
MAC addresses with interfaces and to optionally associate IP addresses
with MAC addresses.</para>
</listitem>
<listitem>
<para>The <emphasis role="bold">MACLIST_DISPOSITION</emphasis> and
<emphasis role="bold">MACLIST_LOG_LEVEL</emphasis> variables in <ulink
url="manpages/shorewall.conf.html">/etc/shorewall/shorewall.conf</ulink>.
The MACLIST_DISPOSITION variable has the value DROP, REJECT or ACCEPT
and determines the disposition of connection requests that fail MAC
verification. The MACLIST_LOG_LEVEL variable gives the syslogd level
at which connection requests that fail verification are to be logged.
If set the empty value (e.g., MACLIST_LOG_LEVEL="") then failing
connection requests are not logged.</para>
</listitem>
<listitem>
<para>The <emphasis role="bold">MACLIST_TTL</emphasis> variable in
<ulink url="???">/etc/shorewall/shorewall.conf</ulink>. The
performance of configurations with a large numbers of entries in
/etc/shorewall/maclist can be improved by setting the MACLIST_TTL
variable.</para>
<para>If your iptables and kernel support the "Recent Match" (see the
output of "shorewall check" near the top), you can cache the results
of a 'maclist' file lookup and thus reduce the overhead associated
with MAC Verification.</para>
<para>When a new connection arrives from a 'maclist' interface, the
packet passes through the list of entries for that interface in
/etc/shorewall/maclist. If there is a match then the source IP address
is added to the 'Recent' set for that interface. Subsequent connection
attempts from that IP address occurring within $MACLIST_TTL seconds
will be accepted without having to scan all of the entries. After
$MACLIST_TTL from the first accepted connection request from an IP
address, the next connection request from that IP address will be
checked against the entire list.</para>
<para>If MACLIST_TTL is not specified or is specified as empty (e.g,
MACLIST_TTL="" or is specified as zero then 'maclist' lookups will not
be cached).</para>
</listitem>
<listitem>
<para>The <emphasis role="bold">MACLIST_TABLE</emphasis> variable in
<ulink url="???">/etc/shorewall/shorewall.conf</ulink>. Normally, MAC
verification occurs in the filter table (INPUT and FORWARD) chains.
When forwarding a packet from an interface with MAC verification to a
bridge interface, that doesn't work.</para>
<para>This problem can be worked around by setting
MACLIST_TABLE=mangle which will cause MAC verification to occur out of
the PREROUTING chain. Because REJECT isn't available in that
environment, you may not specify MACLIST_DISPOSITION=REJECT with
MACLIST_TABLE=mangle.</para>
</listitem>
</orderedlist>
</section>
<section id="maclist">
<title>/etc/shorewall/maclist</title>
<para>See <ulink
url="manpages/shorewall-maclist.html">shorewall-maclist</ulink>(5).</para>
</section>
<section id="Examples">
<title>Examples</title>
<example id="Example1">
<title>My MAC Validation configuration at a point in the past</title>
<para>/etc/shorewall/shorewall.conf:</para>
<programlisting>MACLIST_DISPOSITION=REJECT
MACLIST_LOG_LEVEL=info</programlisting>
<para>/etc/shorewall/interfaces:</para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
net $EXT_IF 206.124.146.255 dhcp,routefilter,logmartians,blacklist,tcpflags,nosmurfs
loc $INT_IF 192.168.1.255 dhcp
dmz $DMZ_IF -
vpn tun+ -
Wifi $WIFI_IF - maclist,dhcp
#LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
<para>/etc/shorewall/maclist:</para>
<programlisting>#DISPOSITION INTERFACE MAC IP ADDRESSES (Optional)
ACCEPT $WIFI_IF 00:04:5e:3f:85:b9 #WAP11
ACCEPT $WIFI_IF 00:06:25:95:33:3c #WET11
ACCEPT $WIFI_IF 00:0b:4d:53:cc:97 192.168.3.8 #TIPPER
ACCEPT $WIFI_IF 00:1f:79:cd:fe:2e 192.168.3.6 #Work Laptop
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
<para>As shown above, I used MAC Verification on my wireless zone that
was served by a Linksys WET11 wireless bridge.</para>
<para><note>
<para>While marketed as a wireless bridge, the WET11 behaves like a
wireless router with DHCP relay. When forwarding DHCP traffic, it
uses the MAC address of the host (TIPPER) but for other forwarded
traffic it uses its own MAC address. Consequently, I listd the IP
addresses of both devices in /etc/shorewall/maclist.</para>
</note></para>
</example>
<example id="Example2">
<title>Router in Wireless Zone</title>
<para>Suppose now that I had added a second wireless segment to my
wireless zone and gateway that segment via a router with MAC address
00:06:43:45:C6:15 and IP address 192.168.3.253. Hosts in the second
segment have IP addresses in the subnet 192.168.4.0/24. I would have
added the following entry to my /etc/shorewall/maclist file:</para>
<programlisting>ACCEPT $WIFI_IF 00:06:43:45:C6:15 192.168.3.253,192.168.4.0/24</programlisting>
<para>This entry would accommodate traffic from the router itself
(192.168.3.253) and from the second wireless segment (192.168.4.0/24).
Remember that all traffic being sent to my firewall from the
192.168.4.0/24 segment will be forwarded by the router so that traffic's
MAC address will be that of the router (00:06:43:45:C6:15) and not that
of the host sending the traffic.</para>
</example>
</section>
</article>