extern/shorewall_code
1
0
Fork 1
mirror of https://gitlab.com/shorewall/code.git synced 2024-11-24 16:43:21 +01:00
Code Issues Packages Projects Releases Wiki Activity
ac5c04e4cb
shorewall_code/Shorewall2/shorewall

1290 lines
27 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
#
# Shorewall Packet Filtering Firewall Control Program - V2.2
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# (c) 1999,2000,2001,2002,2003,2004 - Tom Eastep (teastep@shorewall.net)
#
# This file should be placed in /sbin/shorewall.
#
# Shorewall documentation is available at http://shorewall.sourceforge.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
# If an error occurs while starting or restarting the firewall, the
# firewall is automatically stopped.
#
# The firewall uses configuration files in /etc/shorewall/ - skeleton
# files is included with the firewall.
#
# Commands are:
#
# shorewall add <iface>[:<host>] zone Adds a host or subnet to a zone
# shorewall delete <iface>[:<host>] zone Deletes a host or subnet from a zone
# shorewall start Starts the firewall
# shorewall restart Restarts the firewall
# shorewall stop Stops the firewall
# shorewall monitor [ refresh-interval ] Repeatedly Displays firewall status
# plus the last 20 "interesting"
# packets
# shorewall status Displays firewall status
# shorewall reset Resets iptables packet and
# byte counts
# shorewall clear Open the floodgates by
# removing all iptables rules
# and setting the three permanent
# chain policies to ACCEPT
# shorewall refresh Rebuild the common chain to
# compensate for a change of
# broadcast address on any "detect"
# interface.
# shorewall show <chain> [ <chain> ... ] Display the rules in each <chain> listed
# shorewall show log Print the last 20 log messages
# shorewall show connections Show the kernel's connection
# tracking table
# shorewall show nat Display the rules in the nat table
# shorewall show {mangle|tos} Display the rules in the mangle table
# shorewall show tc Display traffic control info
# shorewall show classifiers Display classifiers
# shorewall version Display the installed version id
# shorewall check Verify the more heavily-used
# configuration files.
# shorewall try <directory> [ <timeout> ] Try a new configuration and if
# it doesn't work, revert to the
# standard one. If a timeout is supplied
# the command reverts back to the
# standard configuration after that many
# seconds have elapsed after successfully
# starting the new configuration.
# shorewall logwatch [ refresh-interval ] Monitor the local log for Shorewall
# messages.
# shorewall drop <address> ... Temporarily drop all packets from the
# listed address(es)
# shorewall reject <address> ... Temporarily reject all packets from the
# listed address(es)
# shorewall allow <address> ... Reenable address(es) previously
# disabled with "drop" or "reject"
# shorewall save [ <file> ] Save the list of "rejected" and
# "dropped" addresses so that it will
# be automatically reinstated the
# next time that Shorewall starts.
# Save the current state so that 'shorewall
# restore' can be used.
#
# shorewall forget [ <file> ] Discard the data saved by 'shorewall save'
#
# shorewall restore [ <file> ] Restore the state of the firewall from
# previously saved information.
#
# shorewall ipaddr [ <address>/<cidr> | <address> <netmask> ]
#
# Displays information about the network
# defined by the argument[s]
#
# shorewall iprange <address>-<address> Decomposes a range of IP addresses into
# a list of network/host addresses.
#
# Fatal Error
#
fatal_error() # $@ = Message
{
echo " $@" >&2
exit 2
}
# Display a chain if it exists
#
showfirstchain() # $1 = name of chain
{
awk \
'BEGIN {prnt=0; rslt=1; }; \
/^$/ { next; };\
/^Chain/ {if ( prnt == 1 ) { rslt=0; exit 0; }; };\
/Chain '$1'/ { prnt=1; }; \
{ if (prnt == 1) print; };\
END { exit rslt; }' $TMPFILE
}
showchain() # $1 = name of chain
{
if [ "$firstchain" = "Yes" ]; then
if showfirstchain $1; then
firstchain=
fi
else
awk \
'BEGIN {prnt=0;};\
/^$|^ pkts/ { next; };\
/^Chain/ {if ( prnt == 1 ) exit; };\
/Chain '$1'/ { prnt=1; };\
{ if (prnt == 1) print; }' $TMPFILE
fi
}
#
# The 'awk' hack that compensates for a bug in iptables-save (actually in libipt_policy.so) and can be removed when that bug is fixed.
#
iptablesbug()
{
if qt which awk ; then
awk 'BEGIN {sline=""; };\
/^-j/ { print sline $0; next };\
/-m policy.*-j/ { print $0; next };\
/-m policy/ { sline=$0; next };\
{print ; sline="" }'
else
echo " Warning: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
cat
fi
}
#
# Validate the value of RESTOREFILE
#
validate_restorefile() # $* = label
{
case $RESTOREFILE in
*/*)
echo " ERROR: $@ must specify a simple file name: $RESTOREFILE" >&2
exit 2
;;
esac
}
#
# Set the configuration variables from shorewall.conf
#
get_config() {
[ -z "$LOGFILE" ] && LOGFILE=/var/log/messages
if [ ! -f $LOGFILE ]; then
echo "LOGFILE ($LOGFILE) does not exist!" >&2
exit 2
fi
#
# See if we have a real version of "tail" -- use separate redirection so
# that ash (aka /bin/sh on LRP) doesn't crap
#
if ( tail -n5 $LOGFILE > /dev/null 2> /dev/null ) ; then
realtail="Yes"
else
realtail=""
fi
[ -n "$FW" ] || FW=fw
[ -n "LOGFORMAT" ] && LOGFORMAT="${LOGFORMAT%%%*}"
[ -n "$LOGFORMAT" ] || LOGFORMAT="Shorewall:"
if [ -n "$IPTABLES" ]; then
if [ ! -e "$IPTABLES" ]; then
echo " ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
exit 2
fi
else
IPTABLES=$(which iptables 2> /dev/null)
if [ -z "$IPTABLES" ] ; then
echo " ERROR: Can't find iptables executable" >&2
exit 2
fi
fi
if [ -n "$SHOREWALL_SHELL" ]; then
if [ ! -e "$SHOREWALL_SHELL" ]; then
echo " ERROR: The program specified in SHOREWALL_SHELL does not exist or is not executable" >&2
exit 2
fi
fi
[ -n "$RESTOREFILE" ] || RESTOREFILE=restore
validate_restorefile RESTOREFILE
export RESTOREFILE
}
#
# Display IPTABLES rules -- we used to store them in a variable but ash
# dies when trying to display large sets of rules
#
display_chains()
{
trap "rm -f /tmp/chains-$$; exit 1" 1 2 3 4 5 6 9
if [ "$haveawk" = "Yes" ]; then
#
# Send the output to a temporary file since ash craps if we try to store
# the output in a variable.
#
TMPFILE=$(mktempfile)
[ -n "$TMPFILE" ] || { echo " ERROR:Cannot create temporary file" >&2; exit 1; }
$IPTABLES -L $IPT_OPTIONS >> $TMPFILE
clear
echo "$banner $(date)"
echo
echo "Standard Chains"
echo
firstchain="Yes"
showchain INPUT
showchain OUTPUT
showchain FORWARD
timed_read
clear
echo "$banner $(date)"
echo
firstchain=Yes
echo "Input Chains"
echo
chains=$(grep '^Chain.*_[in|fwd]' $TMPFILE | cut -d' ' -f 2)
for chain in $chains; do
showchain $chain
done
timed_read
for zone in $zones; do
if [ -n "$(grep "^Chain \.*${zone}" $TMPFILE)" ] ; then
clear
echo "$banner $(date)"
echo
firstchain=Yes
eval display=\$${zone}_display
echo "$display Chains"
echo
for zone1 in $FW $zones; do
showchain ${zone}2$zone1
showchain @${zone}2$zone1
[ "$zone" != "$zone1" ] && \
showchain ${zone1}2${zone} && \
showchain @${zone1}2${zone}
done
timed_read
fi
done
clear
echo "$banner $(date)"
echo
firstchain=Yes
echo "Policy Chains"
echo
showchain common
showchain badpkt
showchain icmpdef
showchain rfc1918
showchain blacklst
showchain reject
showchain newnotsyn
for zone in $zones all; do
showchain ${zone}2all
showchain @${zone}2all
[ "$zone" = "all" ] || { showchain all2${zone}; showchain @all2${zone}; }
done
timed_read
clear
echo "$banner $(date)"
echo
firstchain=Yes
echo "Dynamic Chain"
echo
showchain dynamic
timed_read
qt rm -f $TMPFILE
else
$IPTABLES -L -n -v
timed_read
fi
trap - 1 2 3 4 5 6 9
}
#
# Delay $timeout seconds -- if we're running on a recent bash2 then allow
# <enter> to terminate the delay
#
timed_read ()
{
read -t $timeout foo 2> /dev/null
test $? -eq 2 && sleep $timeout
}
#
# Display the last $1 packets logged
#
packet_log() # $1 = number of messages
{
local options
[ -n "$realtail" ] && options="-n$1"
grep "${LOGFORMAT}" $LOGFILE | \
sed s/" kernel:"// | \
sed s/" $host $LOGFORMAT"/" "/ | \
sed 's/MAC=.* SRC=/SRC=/' | \
tail $options
}
#
# Show traffic control information
#
show_tc() {
show_one_tc() {
local device=${1%@*}
qdisc=$(tc qdisc list dev $device)
if [ -n "$qdisc" ]; then
echo Device $device:
tc -s -d qdisc show dev $device
tc -s -d class show dev $device
echo
fi
}
ip link list | \
while read inx interface details; do
case $inx in
[0-9]*)
show_one_tc ${interface%:}
;;
*)
;;
esac
done
}
#
# Show classifier information
#
show_classifiers() {
show_one_classifier() {
local device=${1%@*}
qdisc=$(tc qdisc list dev $device)
if [ -n "$qdisc" ]; then
echo Device $device:
tc -s filter ls dev $device
echo
fi
}
ip link list | \
while read inx interface details; do
case $inx in
[0-9]*)
show_one_classifier ${interface%:}
;;
*)
;;
esac
done
}
#
# Monitor the Firewall
#
monitor_firewall() # $1 = timeout -- if negative, prompt each time that
# an 'interesting' packet count changes
{
host=$(echo $HOSTNAME | sed 's/\..*$//')
oldrejects=$($IPTABLES -L -v -n | grep 'LOG')
if [ $1 -lt 0 ]; then
let "timeout=- $1"
pause="Yes"
else
pause="No"
timeout=$1
fi
if qt which awk; then
TMP_DIR=$(mktempdir)
[ -n "$TMP_DIR" ] || { echo " ERROR:Cannot create temporary directory" >&2; exit 1; }
haveawk=Yes
determine_zones
rm -rf $TMP_DIR
else
haveawk=
fi
while true; do
display_chains
clear
echo "$banner $(date)"
echo
echo "Dropped/Rejected Packet Log"
echo
show_reset
rejects=$($IPTABLES -L -v -n | grep 'LOG')
if [ "$rejects" != "$oldrejects" ]; then
oldrejects="$rejects"
$RING_BELL
packet_log 20
if [ "$pause" = "Yes" ]; then
echo
echo $ECHO_N 'Enter any character to continue: '
read foo
else
timed_read
fi
else
echo
packet_log 20
timed_read
fi
clear
echo "$banner $(date)"
echo
echo "NAT Status"
echo
$IPTABLES -t nat -L $IPT_OPTIONS
timed_read
clear
echo "$banner $(date)"
echo
echo
echo "TOS/MARK Status"
echo
$IPTABLES -t mangle -L $IPT_OPTIONS
timed_read
clear
echo "$banner $(date)"
echo
echo
echo "Tracked Connections"
echo
cat /proc/net/ip_conntrack
timed_read
clear
echo "$banner $(date)"
echo
echo
echo "Traffic Shaping/Control"
echo
show_tc
timed_read
clear
echo "$banner $(date)"
echo
echo
echo "Packet Classifiers"
echo
show_classifiers
timed_read
done
}
#
# Watch the Firewall Log
#
logwatch() # $1 = timeout -- if negative, prompt each time that
# an 'interesting' packet count changes
{
host=$(echo $HOSTNAME | sed 's/\..*$//')
oldrejects=$($IPTABLES -L -v -n | grep 'LOG')
if [ $1 -lt 0 ]; then
timeout=$((- $1))
pause="Yes"
else
pause="No"
timeout=$1
fi
qt which awk && haveawk=Yes || haveawk=
while true; do
clear
echo "$banner $(date)"
echo
echo "Dropped/Rejected Packet Log"
echo
show_reset
rejects=$($IPTABLES -L -v -n | grep 'LOG')
if [ "$rejects" != "$oldrejects" ]; then
oldrejects="$rejects"
$RING_BELL
packet_log 40
if [ "$pause" = "Yes" ]; then
echo
echo $ECHO_N 'Enter any character to continue: '
read foo
else
timed_read
fi
else
echo
packet_log 40
timed_read
fi
done
}
#
# Help information
#
help()
{
[ -x $HELP ] && { export version; exec $HELP $*; }
echo "Help subsystem is not installed at $HELP"
}
#
# Give Usage Information
#
usage() # $1 = exit status
{
echo "Usage: $(basename $0) [debug|trace] [nolock] [-c <directory>] [ -x ] [ -q ] [ -f ] <command>"
echo "where <command> is one of:"
echo " add <interface>[:<host>] <zone>"
echo " allow <address> ..."
echo " check [ <directory> ]"
echo " clear"
echo " delete <interface>[:<host>] <zone>"
echo " drop <address> ..."
echo " forget [ <file name> ]"
echo " help [ <command > | host | address ]"
echo " hits"
echo " ipcalc [ <address>/<vlsm> | <address> <netmask> ]"
echo " iprange <address>-<address>"
echo " logwatch [<refresh interval>]"
echo " monitor [<refresh interval>]"
echo " refresh"
echo " reject <address> ..."
echo " reset"
echo " restart [ <directory> ]"
echo " restore [ <file name> ]"
echo " save [ <file name> ]"
echo " show [<chain> [ <chain> ... ]|classifiers|connections|log|nat|tc|tos|zones]"
echo " start [ <directory> ]"
echo " stop"
echo " status"
echo " try <directory> [ <timeout> ]"
echo " version"
echo
echo "The -c and -f options may not be specified with a <directory> in the start, restart and check commands"
exit $1
}
#
# Display the time that the counters were last reset
#
show_reset() {
[ -f $STATEDIR/restarted ] && \
echo "Counters reset $(cat $STATEDIR/restarted)" && \
echo
}
#
# Display's the passed file name followed by "=" and the file's contents.
#
show_proc() # $1 = name of a file
{
[ -f $1 ] && echo " $1 = $(cat $1)"
}
#
# Execution begins here
#
debugging=
if [ $# -gt 0 ] && [ "$1" = "debug" -o "$1" = "trace" ]; then
debugging=debug
shift
fi
nolock=
if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then
nolock=nolock
shift
fi
SHOREWALL_DIR=
QUIET=
IPT_OPTIONS="-nv"
FAST=
done=0
while [ $done -eq 0 ]; do
[ $# -eq 0 ] && usage 1
option=$1
case $option in
-*)
option=${option#-}
[ -z "$option" ] && usage 1
while [ -n "$option" ]; do
case $option in
c)
[ $# -eq 1 ] && usage 1
if [ ! -d $2 ]; then
if [ -e $2 ]; then
echo "$2 is not a directory" >&2 && exit 2
else
echo "Directory $2 does not exist" >&2 && exit 2
fi
fi
SHOREWALL_DIR=$2
option=
shift
;;
x*)
IPT_OPTIONS="-xnv"
option=${option#x}
;;
q*)
QUIET=Yes
option=${option#q}
;;
f*)
FAST=Yes
option=${option#f}
;;
*)
usage 1
;;
esac
done
shift
;;
*)
done=1
;;
esac
done
if [ $# -eq 0 ]; then
usage 1
fi
[ -n "$SHOREWALL_DIR" ] && export SHOREWALL_DIR
[ -n "$QUIET" ] && export QUIET
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
MUTEX_TIMEOUT=
SHARED_DIR=/usr/share/shorewall
FIREWALL=$SHARED_DIR/firewall
FUNCTIONS=$SHARED_DIR/functions
VERSION_FILE=$SHARED_DIR/version
HELP=$SHARED_DIR/help
if [ -f $FUNCTIONS ]; then
. $FUNCTIONS
else
echo "$FUNCTIONS does not exist!" >&2
exit 2
fi
ensure_config_path
config=$(find_file shorewall.conf)
if [ -f $config ]; then
if [ -r $config ]; then
. $config
else
echo "Cannot read $config! (Hint: Are you root?)" >&2
exit 1
fi
else
echo "$config does not exist!" >&2
exit 2
fi
ensure_config_path
export CONFIG_PATH
get_config
[ -z "${STATEDIR}" ] && STATEDIR=/var/state/shorewall
if [ ! -f $FIREWALL ]; then
echo "ERROR: Shorewall is not properly installed"
if [ -L $FIREWALL ]; then
echo " $FIREWALL is a symbolic link to a"
echo " non-existant file"
else
echo " The file $FIREWALL does not exist"
fi
exit 2
fi
if [ -f $VERSION_FILE ]; then
version=$(cat $VERSION_FILE)
else
echo "ERROR: Shorewall is not properly installed"
echo " The file $VERSION_FILE does not exist"
exit 1
fi
banner="Shorewall-$version Status at $HOSTNAME -"
case $(echo -e) in
-e*)
RING_BELL="echo \a"
;;
*)
RING_BELL="echo -e \a"
;;
esac
case $(echo -n "Testing") in
-n*)
ECHO_N=
;;
*)
ECHO_N=-n
;;
esac
case "$1" in
start)
case $# in
1)
;;
2)
[ -n "$SHOREWALL_DIR" -o -n "$FAST" ] && usage 2
if [ ! -d $2 ]; then
if [ -e $2 ]; then
echo "$2 is not a directory" >&2 && exit 2
else
echo "Directory $2 does not exist" >&2 && exit 2
fi
fi
SHOREWALL_DIR=$2
export SHOREWALL_DIR
;;
*)
usage 1
;;
esac
if [ -n "$FAST" ]; then
RESTOREPATH=/var/lib/shorewall/$RESTOREFILE
if [ -x $RESTOREPATH ]; then
echo Restoring Shorewall...
$RESTOREPATH
date > $STATEDIR/restarted
echo Shorewall restored from $RESTOREPATH
else
exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock start
fi
else
exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock start
fi
;;
stop|reset|clear|refresh)
[ $# -ne 1 ] && usage 1
exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $1
;;
check|restart)
case $# in
1)
;;
2)
[ -n "$SHOREWALL_DIR" ] && usage 2
if [ ! -d $2 ]; then
if [ -e $2 ]; then
echo "$2 is not a directory" >&2 && exit 2
else
echo "Directory $2 does not exist" >&2 && exit 2
fi
fi
SHOREWALL_DIR=$2
export SHOREWALL_DIR
;;
*)
usage 1
;;
esac
exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $1
;;
add|delete)
[ $# -lt 3 ] && usage 1
exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $@
;;
show|list)
[ -n "$debugging" ] && set -x
case "$2" in
connections)
[ $# -gt 2 ] && usage 1
echo "Shorewall-$version Connections at $HOSTNAME - $(date)"
echo
cat /proc/net/ip_conntrack
;;
nat)
[ $# -gt 2 ] && usage 1
echo "Shorewall-$version NAT at $HOSTNAME - $(date)"
echo
show_reset
$IPTABLES -t nat -L $IPT_OPTIONS
;;
tos|mangle)
[ $# -gt 2 ] && usage 1
echo "Shorewall-$version TOS at $HOSTNAME - $(date)"
echo
show_reset
$IPTABLES -t mangle -L $IPT_OPTIONS
;;
log)
[ $# -gt 2 ] && usage 1
echo "Shorewall-$version Log at $HOSTNAME - $(date)"
echo
show_reset
host=$(echo $HOSTNAME | sed 's/\..*$//')
packet_log 20
;;
tc)
[ $# -gt 2 ] && usage 1
echo "Shorewall-$version Traffic Control at $HOSTNAME - $(date)"
echo
show_tc
;;
classifiers)
[ $# -gt 2 ] && usage 1
echo "Shorewall-$version Clasifiers at $HOSTNAME - $(date)"
echo
show_classifiers
;;
zones)
[ $# -gt 2 ] && usage 1
[ -z "${STATEDIR}" ] && STATEDIR=/var/state/shorewall
if [ -f $STATEDIR/zones ]; then
echo "Shorewall-$version Zones at $HOSTNAME - $(date)"
echo
while read zone hosts; do
echo $zone
for host in $hosts; do
echo " $host"
done
done < $STATEDIR/zones
echo
else
echo " ERROR: $STATEDIR/zones does not exist" >&2
exit 1
fi
;;
*)
shift
echo "Shorewall-$version $([ $# -gt 1 ] && echo Chains || echo Chain) $* at $HOSTNAME - $(date)"
echo
show_reset
if [ $# -gt 0 ]; then
for chain in $*; do
$IPTABLES -L $chain $IPT_OPTIONS
done
else
$IPTABLES -L $IPT_OPTIONS
fi
;;
esac
;;
monitor)
[ -n "$debugging" ] && set -x
if [ $# -eq 2 ]; then
monitor_firewall $2
elif [ $# -eq 1 ]; then
monitor_firewall 30
else
usage 1
fi
;;
status)
[ -n "$debugging" ] && set -x
[ $# -eq 1 ] || usage 1
clear
echo "Shorewall-$version Status at $HOSTNAME - $(date)"
echo
show_reset
host=$(echo $HOSTNAME | sed 's/\..*$//')
$IPTABLES -L $IPT_OPTIONS
echo
packet_log 20
echo
echo "NAT Table"
echo
$IPTABLES -t nat -L $IPT_OPTIONS
echo
echo "Mangle Table"
echo
$IPTABLES -t mangle -L $IPT_OPTIONS
echo
cat /proc/net/ip_conntrack
echo
echo "IP Configuration"
echo
ip addr ls
echo
echo "IP Stats"
echo
ip -stat link ls
if qt which brctl; then
echo
echo "Bridges"
echo
brctl show
fi
echo
echo "/proc"
echo
show_proc /proc/sys/net/ipv4/ip_forward
show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all
for directory in /proc/sys/net/ipv4/conf/*; do
for file in proxy_arp arp_filter rp_filter log_martians; do
show_proc $directory/$file
done
done
echo
echo "Routing Rules"
echo
ip rule ls
ip rule ls | while read rule; do
table=${rule##* }
echo
echo "Table $table:"
echo
ip route ls table $table
done
;;
hits)
[ -n "$debugging" ] && set -x
[ $# -eq 1 ] || usage 1
clear
echo "Shorewall-$version Hits at $HOSTNAME - $(date)"
echo
timeout=30
if [ $(grep -c "$LOGFORMAT" $LOGFILE ) -gt 0 ] ; then
echo " HITS IP DATE"
echo " ---- --------------- ------"
grep "$LOGFORMAT" $LOGFILE | sed 's/\(.\{6\}\)\(.*SRC=\)\(.*\)\( DST=.*\)/\3 \1/' | sort | uniq -c | sort -rn
echo ""
echo " HITS IP PORT"
echo " ---- --------------- -----"
grep "$LOGFORMAT" $LOGFILE | sed 's/\(.*SRC=\)\(.*\)\( DST=.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2 \4/
t
s/\(.*SRC=\)\(.*\)\( DST=.*\)/\2/' | sort | uniq -c | sort -rn
echo ""
echo " HITS DATE"
echo " ---- ------"
grep "$LOGFORMAT" $LOGFILE | sed 's/\(.\{6\}\)\(.*\)/\1/' | sort | uniq -c | sort -rn
echo ""
echo " HITS PORT SERVICE(S)"
echo " ---- ----- ----------"
grep "$LOGFORMAT.*DPT" $LOGFILE | sed 's/\(.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2/' | sort | uniq -c | sort -rn | \
while read count port ; do
# List all services defined for the given port
srv=$(grep "^[^#].*\\b$port/" /etc/services | cut -f 1 | sort -u)
srv=$(echo $srv | sed 's/ /,/g')
if [ -n "$srv" ] ; then
printf '%7d %5d %s\n' $count $port $srv
else
printf '%7d %5d\n' $count $port
fi
done
fi
;;
version)
echo $version
;;
try)
[ -n "$SHOREWALL_DIR" ] && startup_error "Error: -c option may not be used with \"try\""
[ $# -lt 2 -o $# -gt 3 ] && usage 1
if ! $0 $debugging -c $2 restart; then
if ! $IPTABLES -L shorewall > /dev/null 2> /dev/null; then
$0 start
fi
elif ! $IPTABLES -L shorewall > /dev/null 2> /dev/null; then
$0 start
elif [ $# -eq 3 ]; then
sleep $3
$0 restart
fi
;;
logwatch)
[ -n "$debugging" ] && set -x
if [ $# -eq 2 ]; then
logwatch $2
elif [ $# -eq 1 ]; then
logwatch 30
else
usage 1
fi
;;
drop)
[ -n "$debugging" ] && set -x
[ $# -eq 1 ] && usage 1
mutex_on
while [ $# -gt 1 ]; do
shift
qt $IPTABLES -D dynamic -s $1 -j reject
qt $IPTABLES -D dynamic -s $1 -j DROP
$IPTABLES -A dynamic -s $1 -j DROP || break 1
echo "$1 Dropped"
done
mutex_off
;;
reject)
[ -n "$debugging" ] && set -x
[ $# -eq 1 ] && usage 1
mutex_on
while [ $# -gt 1 ]; do
shift
qt $IPTABLES -D dynamic -s $1 -j reject
qt $IPTABLES -D dynamic -s $1 -j DROP
$IPTABLES -A dynamic -s $1 -j reject || break 1
echo "$1 Rejected"
done
mutex_off
;;
allow)
[ -n "$debugging" ] && set -x
[ $# -eq 1 ] && usage 1
mutex_on
while [ $# -gt 1 ]; do
shift
if qt $IPTABLES -D dynamic -s $1 -j reject || qt $IPTABLES -D dynamic -s $1 -j DROP; then
echo "$1 Allowed"
else
echo "$1 Not Dropped or Rejected"
fi
done
mutex_off
;;
save)
[ -n "$debugging" ] && set -x
case $# in
1)
;;
2)
RESTOREFILE="$2"
validate_restorefile '<restore file>'
;;
*)
usage 1
;;
esac
RESTOREPATH=/var/lib/shorewall/$RESTOREFILE
mutex_on
if qt $IPTABLES -L shorewall -n; then
[ -d /var/lib/shorewall ] || mkdir -p /var/lib/shorewall
if [ -f $RESTOREPATH -a ! -x $RESTOREPATH ]; then
echo " ERROR: $RESTOREPATH exists and is not a saved Shorewall configuration"
else
case $RESTOREFILE in
save|restore-base)
echo " ERROR: Reserved file name: $RESTOREFILE"
;;
*)
if $IPTABLES -L dynamic -n > /var/lib/shorewall/save; then
echo " Dynamic Rules Saved"
if [ -f /var/lib/shorewall/restore-base ]; then
cp -f /var/lib/shorewall/restore-base /var/lib/shorewall/restore-$$
if iptables-save | iptablesbug >> /var/lib/shorewall/restore-$$ ; then
echo __EOF__ >> /var/lib/shorewall/restore-$$
[ -f /var/lib/shorewall/restore-tail ] && \
cat /var/lib/shorewall/restore-tail >> /var/lib/shorewall/restore-$$
mv -f /var/lib/shorewall/restore-$$ $RESTOREPATH
chmod +x $RESTOREPATH
echo " Currently-running Configuration Saved to $RESTOREPATH"
else
rm -f /var/lib/shorewall/restore-$$
echo " ERROR: Currently-running Configuration Not Saved"
fi
else
echo " ERROR: /var/lib/shorewall/restore-base does not exist"
fi
else
echo "Error Saving the Dynamic Rules"
fi
;;
esac
fi
else
echo "Shorewall isn't started"
fi
mutex_off
;;
forget)
case $# in
1)
;;
2)
RESTOREFILE="$2"
validate_restorefile '<restore file>'
;;
*)
usage 1
;;
esac
RESTOREPATH=/var/lib/shorewall/$RESTOREFILE
if [ -x $RESTOREPATH ]; then
rm -f $RESTOREPATH
echo " $RESTOREPATH removed"
elif [ -f $RESTOREPATH ]; then
echo " $RESTOREPATH exists and is not a saved Shorewall configuration"
fi
;;
ipcalc)
[ -n "$debugging" ] && set -x
if [ $# -eq 2 ]; then
address=${2%/*}
vlsm=${2#*/}
elif [ $# -eq 3 ]; then
address=$2
vlsm=$(ip_vlsm $3)
else
usage 1
fi
[ -z "$vlsm" ] && exit 2
[ "x$address" = "x$vlsm" ] && usage 2
[ $vlsm -gt 32 ] && echo "Invalid VLSM: /$vlsm" >&2 && exit 2
address=$address/$vlsm
echo " CIDR=$address"
temp=$(ip_netmask $address); echo " NETMASK=$(encodeaddr $temp)"
temp=$(ip_network $address); echo " NETWORK=$temp"
temp=$(broadcastaddress $address); echo " BROADCAST=$temp"
;;
iprange)
[ -n "$debugging" ] && set -x
case $2 in
*.*.*.*-*.*.*.*)
ip_range $2
;;
*)
usage 1
;;
esac
;;
restore)
case $# in
1)
;;
2)
RESTOREFILE="$2"
validate_restorefile '<restore file>'
;;
*)
usage 1
;;
esac
RESTOREPATH=/var/lib/shorewall/$RESTOREFILE
if [ -x $RESTOREPATH ]; then
echo Restoring Shorewall...
$RESTOREPATH && echo "Shorewall restored from /var/lib/shorewall/$RESTOREFILE"
else
echo "File /var/lib/shorewall/$RESTOREFILE: file not found"
exit 2
fi
;;
call)
[ -n "$debugging" ] && set -x
#
# Undocumented way to call functions in /usr/share/shorewall/functions directly
#
shift;
$@
;;
help)
shift
[ $# -ne 1 ] && usage 1
help $@
;;
*)
usage 1
;;
esac
Reference in New Issue View Git Blame Copy Permalink