mirror of
https://gitlab.com/shorewall/code.git
synced 2024-11-25 00:53:49 +01:00
b7b4f6d2e8
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@192 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
851 lines
34 KiB
HTML
851 lines
34 KiB
HTML
<html>
|
|
|
|
<head>
|
|
<meta http-equiv="Content-Language" content="en-us">
|
|
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
|
|
<meta name="ProgId" content="FrontPage.Editor.Document">
|
|
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
|
|
<title>Three-Interface Firewall</title>
|
|
<meta name="Microsoft Theme" content="boldstri 011, default">
|
|
</head>
|
|
|
|
<body>
|
|
|
|
<h1 align="center">Three-Interface Firewall</h1>
|
|
|
|
<h2 align="center">Version 2.0.1</h2>
|
|
<p align="left">Setting up a Linux system as a firewall for a small network with
|
|
DMZ is a
|
|
fairly straight-forward task if you understand the basics and follow the
|
|
documentation.</p>
|
|
<p>This guide doesn't attempt to acquaint you with all of the features of
|
|
Shorewall. It rather focuses on what is required to configure Shorewall in one
|
|
of its more popular configurations:</p>
|
|
<ul>
|
|
<li>Linux system used as a firewall/router for a small local network.</li>
|
|
<li>Single external IP address.</li>
|
|
<li>DMZ connected to a separate ethernet interface.</li>
|
|
<li>Connection through DSL, Cable Modem, ISDN, Frame Relay, dial-up, ...</li>
|
|
</ul>
|
|
<p align="left">Here is a schematic of a typical installation.</p>
|
|
<p align="center">
|
|
<img border="0" src="images/dmz1.png" width="692" height="635"></p>
|
|
<p>This guide assumes that you have the iproute/iproute2 package installed (on
|
|
RedHat, the package is called <i>iproute</i>)<i>. </i>You can tell if this
|
|
package is installed by the presence of an <b>ip</b> program on your firewall
|
|
system. As root, you can use the 'which' command to check for this program:</p>
|
|
<pre> [root@gateway root]# which ip
|
|
/sbin/ip
|
|
[root@gateway root]#</pre><p>I recommend that you first read through the guide
|
|
|
|
to familiarize yourself with what's involved then go back through it again
|
|
making your configuration changes. Points at which configuration changes are
|
|
recommended are flagged with <img border="0" src="images/BD21298_.gif" width="13" height="13"></p>
|
|
<p><img border="0" src="images/j0213519.gif" width="60" height="60">
|
|
If you edit your configuration files on a Windows system, you must save them as
|
|
Unix files if your editor supports that option or you must run them through
|
|
dos2unix before trying to use them. Similarly, if you copy a configuration file
|
|
from your Windows hard drive to a floppy disk, you must run dos2unix against the
|
|
copy before using it with Shorewall.</p>
|
|
<ul>
|
|
<li><a href="http://www.simtel.net/pub/pd/51438.html">Windows Version of
|
|
dos2unix</a></li>
|
|
<li><a href="http://www.megaloman.com/~hany/software/hd2u/">Linux Version of
|
|
dos2unix</a></li>
|
|
</ul>
|
|
<h2 align="left">Shorewall Concepts</h2>
|
|
<p>The configuration files for Shorewall are contained in the directory
|
|
/etc/shorewall -- for simple setups, you will only need to deal with a few of
|
|
these as described in this guide. After you have <a href="Install.htm">installed Shorewall</a>,
|
|
download the <a href="/pub/shorewall/LATEST.samples/three-interfaces.tgz">three-interface sample</a>, un-tar it
|
|
(tar -zxvf three-interfaces.tgz) and and copy the files to /etc/shorewall
|
|
(the files will replace files with the same names that were placed in
|
|
/etc/shorewall when Shorewall was installed).</p>
|
|
<p>As each file is introduced, I suggest that you
|
|
look through the actual file on your system -- each file contains detailed
|
|
configuration instructions and default entries.</p>
|
|
<p>Shorewall views the network where it is running as being composed of a set of
|
|
<i>zones.</i> In the three-interface sample configuration, the following zone names are used:</p>
|
|
<table border="0" style="border-collapse: collapse" cellpadding="3" cellspacing="0" id="AutoNumber2">
|
|
<tr>
|
|
<td><u><b>Name</b></u></td>
|
|
<td><u><b>Description</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td><b>net</b></td>
|
|
<td><b>The Internet</b></td>
|
|
</tr>
|
|
<tr>
|
|
<td><b>loc</b></td>
|
|
<td><b>Your Local Network</b></td>
|
|
</tr>
|
|
<tr>
|
|
<td><b>dmz</b></td>
|
|
<td><b>Demilitarized Zone</b></td>
|
|
</tr>
|
|
</table>
|
|
<p>Zone names are defined in <a href="Documentation.htm#Zones">
|
|
/etc/shorewall/zones</a>.</p>
|
|
<p>Shorewall also recognizes the firewall system as its own zone - by default,
|
|
the firewall itself is known as <b>fw</b>.</p>
|
|
<p>Rules about what traffic to allow and what traffic to deny are expressed in
|
|
terms of zones.</p>
|
|
<ul>
|
|
<li>You express your default policy for connections from one zone to another
|
|
zone in the<a href="Documentation.htm#Policy"> /etc/shorewall/policy </a>file.</li>
|
|
<li>You define exceptions to those default policies in the
|
|
<a href="Documentation.htm#Rules">/etc/shorewall/rules </a>file.</li>
|
|
</ul>
|
|
<p>For each connection request entering the firewall, the request is first checked against the
|
|
/etc/shorewall/rules file. If no rule in that file matches the connection
|
|
request then the first policy in /etc/shorewall/policy that matches the
|
|
|
|
request is applied. If that policy is REJECT or DROP the request is first
|
|
checked against the rules in /etc/shorewall/common (the samples provide that
|
|
file for you).</p>
|
|
<p>The /etc/shorewall/policy file included with the three-interface sample has the
|
|
following policies:</p>
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber3">
|
|
<tr>
|
|
<td><u><b>Source Zone</b></u></td>
|
|
<td><u><b>Destination Zone</b></u></td>
|
|
<td><u><b>Policy</b></u></td>
|
|
<td><u><b>Log Level</b></u></td>
|
|
<td><u><b>Limit:Burst</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>loc</td>
|
|
<td>net</td>
|
|
<td>ACCEPT</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>net</td>
|
|
<td>all</td>
|
|
<td>DROP</td>
|
|
<td>info</td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>all</td>
|
|
<td>all</td>
|
|
<td>REJECT</td>
|
|
<td>info</td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<blockquote>
|
|
<p>In the three-interface sample, the line below is included but commented out. If
|
|
you want your firewall system to have full access to servers on the internet,
|
|
uncomment that line.</p>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber3">
|
|
<tr>
|
|
<td><u><b>Source Zone</b></u></td>
|
|
<td><u><b>Destination Zone</b></u></td>
|
|
<td><u><b>Policy</b></u></td>
|
|
<td><u><b>Log Level</b></u></td>
|
|
<td><u><b>Limit:Burst</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>fw</td>
|
|
<td>net</td>
|
|
<td>ACCEPT</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<p>The above policy will:</p>
|
|
<ol>
|
|
<li>allow all connection requests from your local network to the internet</li>
|
|
<li>drop (ignore) all connection requests from the internet to your firewall
|
|
or local network</li>
|
|
<li>optionally accept all connection requests from the firewall to the
|
|
internet (if you uncomment the additional policy)</li>
|
|
<li>reject all other connection requests.</li>
|
|
</ol>
|
|
<p><img border="0" src="images/BD21298_1.gif" width="13" height="13"> At this point, edit your /etc/shorewall/policy
|
|
file and make any changes that you
|
|
wish.</p>
|
|
<h2 align="left">Network Interfaces</h2>
|
|
<p align="center">
|
|
<img border="0" src="images/dmz1.png" width="692" height="635"></p>
|
|
<p align="left">The firewall has three network interfaces. Where Internet
|
|
connectivity is through a cable or DSL "Modem", the <i>External Interface</i>
|
|
will be the ethernet adapter that is connected to that "Modem" (e.g., <b>eth0</b>)
|
|
<u>unless</u> you connect via <i><u>P</u>oint-to-<u>P</u>oint <u>P</u>rotocol
|
|
over <u>E</u>thernet</i> (PPPoE) or <i><u>P</u>oint-to-<u>P</u>oint <u>T</u>unneling
|
|
<u>P</u>rotocol </i>(PPTP) in which case the External Interface will be a ppp
|
|
interface (e.g., <b>ppp0</b>). If you connect via a regular modem, your External
|
|
Interface will also be <b>ppp0</b>. If you connect using ISDN, you external
|
|
interface will be <b>ippp0.</b></p>
|
|
<p align="left"><img border="0" src="images/BD21298_1.gif" width="13" height="13"> If your external interface is <b>ppp0</b>
|
|
or <b>ippp0 </b>then you will want to
|
|
set CLAMPMSS=yes in <a href="Documentation.htm#Conf">
|
|
/etc/shorewall/shorewall.conf.</a></p>
|
|
<p align="left">Your <i>Local Interface</i> will be an ethernet adapter (eth0,
|
|
eth1 or eth2) and will be connected to a hub or switch. Your local computers
|
|
will be connected to the same switch (note: If you have only a single local system,
|
|
you can connect the firewall directly to the computer using a <i>cross-over </i>
|
|
cable).</p>
|
|
<p align="left">Your <i>DMZ Interface</i> will also be an ethernet adapter (eth0,
|
|
eth1 or eth2) and will be connected to a hub or switch. Your DMZ computers will
|
|
be connected to the same switch (note: If you have only a single DMZ system,
|
|
you can connect the firewall directly to the computer using a <i>cross-over </i>
|
|
cable).</p>
|
|
<p align="left"><u><b>
|
|
<img border="0" src="images/j0213519.gif" width="60" height="60"></b></u>Do not connect more than one interface
|
|
to the same hub or switch (even for testing). It won't work the way that you
|
|
expect it to and you will end up confused and
|
|
believing that Shorewall doesn't work at all.</p>
|
|
<p align="left"><img border="0" src="images/BD21298_2.gif" width="13" height="13"> The Shorewall three-interface sample configuration assumes that
|
|
the external interface is <b>eth0, </b>the local interface is <b>eth1 </b>and
|
|
the DMZ interface is <b>
|
|
eth2</b>.
|
|
If your configuration is different, you will have to modify the sample
|
|
/etc/shorewall/interfaces file accordingly. While you are there, you may wish to
|
|
review the list of options that are specified for the interfaces. Some hints:</p>
|
|
<ul>
|
|
<li>
|
|
<p align="left">If your external interface is <b>ppp0</b> or <b>ippp0</b>, you can replace the
|
|
"detect" in the second column with "-".</li>
|
|
<li>
|
|
<p align="left">If your external interface is <b>ppp0</b> or <b>ippp0</b> or if you have a static IP
|
|
address, you can remove "dhcp" from the option list.</li>
|
|
</ul>
|
|
<h2 align="left">IP Addresses</h2>
|
|
<p align="left">Before going further, we should say a few words about Internet
|
|
Protocol (IP) <i>addresses</i>. Normally, your ISP will assign you a single <i>
|
|
Public</i> IP address. This address may be assigned via the<i> Dynamic Host
|
|
Configuration Protocol</i> (DHCP) or as part of establishing your connection
|
|
when you dial in (standard modem) or establish your PPP connection. In rare
|
|
cases, your ISP may assign you a<i> static</i> IP address; that means that you
|
|
configure your firewall's external interface to use that address permanently.<i>
|
|
</i>Regardless of how the address is assigned, it will be shared by all of your
|
|
systems when you access the Internet. You will have to assign your own addresses
|
|
for your internal network (the local and DMZ Interfaces on your firewall plus your other
|
|
computers). RFC 1918 reserves several <i>Private </i>IP address ranges for this
|
|
purpose:</p>
|
|
<div align="left">
|
|
<pre> 10.0.0.0 - 10.255.255.255
|
|
172.16.0.0 - 172.31.255.255
|
|
192.168.0.0 - 192.168.255.255</pre>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left"><img border="0" src="images/BD21298_.gif" width="13" height="13">
|
|
Before starting Shorewall, you should look at the IP address of your external
|
|
interface and if it is one of the above ranges, you should remove the
|
|
'norfc1918' option from the external interface's entry in
|
|
/etc/shorewall/interfaces.</div>
|
|
<div align="left">
|
|
<p align="left">You will want to assign your local addresses from one <i>
|
|
sub-network </i>or <i>subnet</i> and your DMZ addresses from another subnet. For our purposes, we can consider a subnet
|
|
to consists of a range of addresses x.y.z.0 - x.y.z.255. Such a subnet will
|
|
have a <i>Subnet Mask </i>of 255.255.255.0. The address x.y.z.0 is reserved as
|
|
the <i>Subnet Address</i> and x.y.z.255 is reserved as the <i>Subnet Broadcast</i>
|
|
<i>Address</i>. In Shorewall, a subnet is described using
|
|
<a href="subnet_masks.htm"> <i>Variable-Length
|
|
Subnet Mask </i>(VLSM)</a> notation with consists of the subnet address followed
|
|
by "/24". The "24" refers to the number of
|
|
consecutive "1" bits from the left of the subnet mask.
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">Example sub-network:</div>
|
|
<div align="left">
|
|
<blockquote>
|
|
<table border="1" style="border-collapse: collapse" id="AutoNumber1" cellpadding="2">
|
|
<tr>
|
|
<td><b>Range:</b></td>
|
|
<td>10.10.10.0 - 10.10.10.255</td>
|
|
</tr>
|
|
<tr>
|
|
<td><b>Subnet Address:</b></td>
|
|
<td>10.10.10.0</td>
|
|
</tr>
|
|
<tr>
|
|
<td><b>Broadcast Address:</b></td>
|
|
<td>10.10.10.255</td>
|
|
</tr>
|
|
<tr>
|
|
<td><b>VLSM Notation:</b></td>
|
|
<td>10.10.10.0/24</td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">It is conventional to assign the internal interface either the
|
|
first usable address in the subnet (10.10.10.1 in the above example) or the
|
|
last usable address (10.10.10.254).</div>
|
|
<div align="left">
|
|
<p align="left">One of the purposes of subnetting is to allow all computers in the
|
|
subnet to understand which other computers can be communicated with directly.
|
|
To communicate with systems outside of the subnetwork, systems send packets
|
|
through a<i> gateway</i> (router).</div>
|
|
<div align="left">
|
|
<p align="left"><img border="0" src="images/BD21298_1.gif" width="13" height="13"> Your local computers
|
|
(Local Computers 1 & 2) should be configured with their<i>
|
|
default gateway</i> set to the IP address of the firewall's internal interface
|
|
and your DMZ computers ( DMZ Computers 1 & 2) should be configured with their
|
|
default gateway set to the IP address of the firewall's DMZ interface.
|
|
</div>
|
|
<p align="left">The foregoing short discussion barely scratches the surface
|
|
regarding subnetting and routing. If you are interested in learning more about
|
|
IP addressing and routing, I highly recommend <i>"IP Fundamentals: What Everyone
|
|
Needs to Know about Addressing & Routing",</i> Thomas A. Maufer, Prentice-Hall,
|
|
1999, ISBN 0-13-975483-0.</p>
|
|
<p align="left">The remainder of this quide will assume that you have configured
|
|
your network as shown here:</p>
|
|
<p align="center">
|
|
<img border="0" src="images/dmz2.png" width="721" height="635"></p>
|
|
<p align="left">The default gateway for the DMZ computers would be 10.10.10.254
|
|
and the default gateway for the Local computers would be 10.10.10.254.</p>
|
|
<h2 align="left">IP Masquerading (SNAT)</h2>
|
|
<p align="left">The addresses reserved by RFC 1918 are sometimes referred to as
|
|
<i>non-routable</i> because the Internet backbone routers don't forward packets
|
|
which have an RFC-1918 destination address. When one of your local systems
|
|
(let's assume local computer 1) sends a connection request to an internet host, the
|
|
firewall must perform <i>Network Address Translation </i>(NAT). The firewall
|
|
rewrites the source address in the packet to be the address of the firewall's
|
|
external interface; in other words, the firewall makes it look as if the firewall
|
|
itself is initiating the connection. This is necessary so that the
|
|
destination host will be able to route return packets back to the firewall
|
|
(remember that packets whose destination address is reserved by RFC 1918 can't
|
|
be routed accross the internet). When the firewall receives a return packet, it
|
|
rewrites the destination address back to 10.10.10.1 and
|
|
forwards the packet on to local computer 1. </p>
|
|
<p align="left">On Linux systems, the above process is often referred to as<i>
|
|
IP Masquerading</i> and you will also see the term <i>Source Network Address
|
|
Translation </i>(SNAT) used. Shorewall follows the convention used with
|
|
Netfilter:</p>
|
|
<ul>
|
|
<li>
|
|
<p align="left"><i>Masquerade</i> describes the case where you let your
|
|
firewall system automatically detect the external interface address.</li>
|
|
<li>
|
|
<p align="left"><i>SNAT</i> refers to the case when you explicitly specify the
|
|
source address that you want outbound packets from your local network to use.
|
|
</li>
|
|
</ul>
|
|
<p align="left">In Shorewall, both Masquerading and SNAT are configured with
|
|
entries in the /etc/shorewall/masq file.</p>
|
|
<p align="left"><img border="0" src="images/BD21298_2.gif" width="13" height="13"> If your external firewall interface is <b>eth0</b>, your local
|
|
interface <b>eth1 </b>and your DMZ interface is <b>eth2</b> then you do not
|
|
need to modify the file provided with the sample. Otherwise, edit
|
|
/etc/shorewall/masq and change it to match your configuration.</p>
|
|
<p align="left"><img border="0" src="images/BD21298_2.gif" width="13" height="13"> If your external IP
|
|
is static, you can enter it in the third column in the /etc/shorewall/masq entry
|
|
if you like although your firewall will work fine if you leave that column
|
|
empty. Entering your static IP in column 3 makes processing outgoing packets a
|
|
little more efficient. </p>
|
|
<h2 align="left">Port Forwarding (DNAT)</h2>
|
|
<p align="left">One of your goals will be to run one or more servers on your DMZ computers. Because these computers have RFC-1918 addresses, it is not
|
|
possible for clients on the internet to connect directly to them. It is rather
|
|
necessary for those clients to address their connection requests to your firewall
|
|
who rewrites the destination address to the address of your server and forwards
|
|
the packet to that server. When your server responds, the firewall automatically
|
|
performs SNAT to rewrite the source address in the response.</p>
|
|
<p align="left">The above process is called<i> Port Forwarding</i> or <i>
|
|
Destination Network Address Translation</i> (DNAT). You configure port
|
|
forwarding using DNAT rules in the /etc/shorewall/rules file.</p>
|
|
<p>The general form of a simple port forwarding rule in
|
|
/etc/shorewall/rules is:</p>
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>DNAT</td>
|
|
<td>net</td>
|
|
<td>dmz:<i><server local ip address> </i>[:<i><server port></i>]</td>
|
|
<td><i><protocol></i></td>
|
|
<td><i><port></i></td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<p>If you don't specify the <i><server port></i>, it is assumed to be the same
|
|
as <i><port></i>.</p>
|
|
<p>Example - you run a Web Server on DMZ 2 and you want to forward incoming
|
|
TCP port 80 to that system:</p>
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>DNAT</td>
|
|
<td>net</td>
|
|
<td>dmz:10.10.11.2</td>
|
|
<td>tcp</td>
|
|
<td>80</td>
|
|
<td># Forward port 80</td>
|
|
<td>from the internet</td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>dmz:10.10.11.2</td>
|
|
<td>tcp</td>
|
|
<td>80</td>
|
|
<td>#Allow connections </td>
|
|
<td>from the local network</td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<p>A
|
|
couple of important points
|
|
to keep in mind:</p>
|
|
<ul>
|
|
<li>When you are connecting to your server from your local systems, you must
|
|
use the server's internal IP address (10.10.11.2).</li>
|
|
<li>Many ISPs block incoming connection requests to port 80. If you have
|
|
problems connecting to your web server, try the following rule and try
|
|
connecting to port 5000 (e.g., connect to <a href="http://w.x.y.z:5000">
|
|
http://w.x.y.z:5000</a> where w.x.y.z is your external IP).</li>
|
|
</ul>
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>DNAT</td>
|
|
<td>net</td>
|
|
<td>dmz:10.10.11.2:80</td>
|
|
<td>tcp</td>
|
|
<td>5000</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<p>If you want to be able
|
|
to access your server from the local network using your external address, then
|
|
if you have a static external IP you can replace the loc->dmz rule above with:</p>
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>DNAT</td>
|
|
<td>net</td>
|
|
<td>dmz:10.10.11.2:80</td>
|
|
<td>tcp</td>
|
|
<td>80</td>
|
|
<td>-</td>
|
|
<td><i><external IP></i></td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<p>If you have a dynamic ip then you must ensure that your external interface is
|
|
up before starting Shorewall and you must take steps as follows (assume that
|
|
your external interface is <b>eth0</b>):</p>
|
|
<ol>
|
|
<li>Include the following in /etc/shorewall/params:<br>
|
|
<br>
|
|
ETH0_IP=`find_interface_address eth0`<br>
|
|
</li>
|
|
<li>Make your loc->dmz rule:</li>
|
|
</ol>
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>DNAT</td>
|
|
<td>net</td>
|
|
<td>dmz:10.10.11.2:80</td>
|
|
<td>tcp</td>
|
|
<td>80</td>
|
|
<td>-</td>
|
|
<td>$ETH0_IP</td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<p>If you want to access your server from the DMZ using your external IP
|
|
address, see <a href="FAQ.htm#faq2a">FAQ 2a</a>.</p>
|
|
<p><img border="0" src="images/BD21298_2.gif" width="13" height="13"> At this point, add the DNAT and
|
|
ACCEPT rules for your servers. </p>
|
|
<h2 align="left">Domain Name Server (DNS)</h2>
|
|
<p align="left">Normally, when you connect to your ISP, as part of getting an IP
|
|
address your firewall's <i>Domain Name Service </i>(DNS) resolver will be
|
|
automatically configured (e.g., the /etc/resolv.conf file will be written).
|
|
Alternatively, your ISP may have given you the IP address of a pair of DNS <i>
|
|
name servers</i> for you to manually configure as your primary and secondary
|
|
name servers. It is <u>your</u> responsibility to configure the resolver in your
|
|
internal systems. You can take one of two approaches:</p>
|
|
<ul>
|
|
<li>
|
|
<p align="left">You can configure your internal systems to use your ISP's name
|
|
servers. If you ISP gave you the addresses of their servers or if those
|
|
addresses are available on their web site, you can configure your internal
|
|
systems to use those addresses. If that information isn't available, look in
|
|
/etc/resolv.conf on your firewall system -- the name servers are given in
|
|
"nameserver" records in that file.</li>
|
|
<li>
|
|
<p align="left"><img border="0" src="images/BD21298_2.gif" width="13" height="13"> You can configure a<i> Caching Name Server </i>on your
|
|
firewall or in your DMZ.<i> </i>Red Hat has an RPM for a caching name server (which also
|
|
requires the 'bind' RPM) and for Bering users, there is dnscache.lrp. If you
|
|
take this approach, you configure your internal systems to use the caching
|
|
name server as their primary (and only) name server. You use the internal IP
|
|
address of the firewall (10.10.10.254 in the example above) for the name
|
|
server address if you choose to run the name server on your firewall. To allow your local systems to talk to your caching name
|
|
server, you must open port 53 (both UDP and TCP) from the local network to the
|
|
server; you do that by adding the rules in /etc/shorewall/rules.</li>
|
|
</ul>
|
|
<blockquote>
|
|
<p align="left">If you run the name server on the firewall:<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>fw</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>fw</td>
|
|
<td>udp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>dmz</td>
|
|
<td>fw</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>dmz</td>
|
|
<td>fw</td>
|
|
<td>udp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
<div align="left">
|
|
<blockquote>
|
|
<p>Run name server on DMZ computer 1</p>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>dmz:10.10.11.1</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>dmz:10.10.11.1</td>
|
|
<td>udp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>fw</td>
|
|
<td>dmz:10.10.10.1</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>fw</td>
|
|
<td>dmz:10.10.10.1</td>
|
|
<td>udp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<h2 align="left">Other Connections</h2>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">The three-interface sample includes the following rules:</div>
|
|
<div align="left">
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>fw</td>
|
|
<td>net</td>
|
|
<td>udp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>fw</td>
|
|
<td>net</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">Those rules allow DNS access from your firewall and may be
|
|
removed if you commented out the line in /etc/shorewall/policy allowing all
|
|
connections from the firewall to the internet.</div>
|
|
<div align="left">
|
|
<p align="left">The sample also includes:</div>
|
|
<div align="left">
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>fw</td>
|
|
<td>tcp</td>
|
|
<td>22</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>loc</td>
|
|
<td>dmz</td>
|
|
<td>tcp</td>
|
|
<td>22</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">That rule allows you to run an SSH server on your firewall and
|
|
in each of your DMZ systems and
|
|
to connect to those servers from your local systems.</div>
|
|
<div align="left">
|
|
<p align="left">If you wish to enable other connections between your systems, the general format is:</div>
|
|
<div align="left">
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td><i><source zone></i></td>
|
|
<td><i><destination zone></i></td>
|
|
<td><i><protocol></i></td>
|
|
<td><i><port></i></td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">Example - You want to run a publicly-available DNS server on your firewall
|
|
system:</div>
|
|
<div align="left">
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>net</td>
|
|
<td>fw</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td>#Allow DNS access</td>
|
|
<td>from the internet</td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>net</td>
|
|
<td>fw</td>
|
|
<td>tcp</td>
|
|
<td>53</td>
|
|
<td>#Allow DNS access</td>
|
|
<td>from the internet</td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">Those two rules would of course be in addition to the rules
|
|
listed above under "If you run the name server on your firewall".</div>
|
|
<div align="left">
|
|
<p align="left">If you don't know what port and protocol a particular
|
|
application uses, look <a href="ports.htm">here</a>.</div>
|
|
<div align="left">
|
|
<p align="left"><b>Important: </b>I don't recommend enabling telnet to/from
|
|
the internet because it uses clear text (even for login!). If you want shell
|
|
access to your firewall from the internet, use SSH:</div>
|
|
<div align="left">
|
|
<blockquote>
|
|
<table border="1" cellpadding="2" style="border-collapse: collapse" id="AutoNumber4">
|
|
<tr>
|
|
<td><u><b>ACTION</b></u></td>
|
|
<td><u><b>SOURCE</b></u></td>
|
|
<td><u><b>DESTINATION</b></u></td>
|
|
<td><u><b>PROTOCOL</b></u></td>
|
|
<td><u><b>PORT</b></u></td>
|
|
<td><u><b>SOURCE PORT</b></u></td>
|
|
<td><u><b>ORIGINAL ADDRESS</b></u></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ACCEPT</td>
|
|
<td>net</td>
|
|
<td>fw</td>
|
|
<td>tcp</td>
|
|
<td>22</td>
|
|
<td> </td>
|
|
<td> </td>
|
|
</tr>
|
|
</table>
|
|
</blockquote>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left"><img border="0" src="images/BD21298_2.gif" width="13" height="13"> Now modify
|
|
/etc/shorewall/rules to add or remove other connections as required.</div>
|
|
<div align="left">
|
|
<h2 align="left">Starting and Stopping Your Firewall</h2>
|
|
</div>
|
|
<div align="left">
|
|
<p align="left">The <a href="Install.htm">installation procedure </a>
|
|
configures your system to start Shorewall at system boot.</div>
|
|
<div align="left">
|
|
<p align="left">The firewall is started using the "shorewall start" command
|
|
and stopped using "shorewall stop". When the firewall is stopped, routing is
|
|
enabled on those hosts that have an entry in
|
|
<a href="Documentation.htm#Routestopped">/etc/shorewall/routestopped</a>. A
|
|
running firewall may be restarted using the "shorewall restart" command. If
|
|
you want to totally remove any trace of Shorewall from your Netfilter
|
|
configuration, use "shorewall clear".</div>
|
|
<div align="left">
|
|
<p align="left"><img border="0" src="images/BD21298_2.gif" width="13" height="13"> The three-interface sample assumes that you want to enable
|
|
routing to/from <b>eth1 (</b>your local network) and<b> eth2 </b>(DMZ) when Shorewall is stopped.
|
|
If these two interfaces don't connect to your local network and DMZ or if you
|
|
want to enable a different set of hosts, modify /etc/shorewall/routestopped
|
|
accordingly.</div>
|
|
<div align="left">
|
|
<p align="left"><b>WARNING: </b>If you are connected to your firewall from the
|
|
internet, do not issue a "shorewall stop" command unless you have added an
|
|
entry for the IP address that you are connected from to
|
|
<a href="Documentation.htm#Routestopped">/etc/shorewall/routestopped</a>.
|
|
Also, I don't recommend using "shorewall restart"; it is better to create an
|
|
<i><a href="Documentation.htm#Configs">alternate configuration</a></i> and
|
|
test it using the <a href="Documentation.htm#Starting">"shorewall try" command</a>.</div>
|
|
<p align="left"><font size="2">Last updated
|
|
7/27/2002 - <a href="support.htm">Tom
|
|
Eastep</a></font></p>
|
|
|
|
<p align="left"><a href="copyright.htm"><font size="2">Copyright 2002 Thomas M. Eastep</font></a></p>
|
|
|
|
</body>
|
|
|
|
</html> |