mirror of
https://gitlab.com/shorewall/code.git
synced 2024-11-24 08:33:40 +01:00
c93817f30b
The invariant sections clause doesn't quite match the official text. It should read: with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts not: with no Invariant Sections, with no Front-Cover, and with no Back-Cover Texts Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
468 lines
16 KiB
XML
468 lines
16 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
|
|
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
|
|
<article>
|
|
<!--$Id$-->
|
|
|
|
<articleinfo>
|
|
<title>Network Mapping</title>
|
|
|
|
<authorgroup>
|
|
<author>
|
|
<firstname>Tom</firstname>
|
|
|
|
<surname>Eastep</surname>
|
|
</author>
|
|
</authorgroup>
|
|
|
|
<pubdate><?dbtimestamp format="Y/m/d"?></pubdate>
|
|
|
|
<copyright>
|
|
<year>2004-2005</year>
|
|
|
|
<year>2007</year>
|
|
|
|
<year>2011</year>
|
|
|
|
<holder>Thomas M. Eastep</holder>
|
|
</copyright>
|
|
|
|
<legalnotice>
|
|
<para>Permission is granted to copy, distribute and/or modify this
|
|
document under the terms of the GNU Free Documentation License, Version
|
|
1.2 or any later version published by the Free Software Foundation; with
|
|
no Invariant Sections, no Front-Cover Texts, and no Back-Cover
|
|
Texts. A copy of the license is included in the section entitled
|
|
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation
|
|
License</ulink></quote>.</para>
|
|
</legalnotice>
|
|
</articleinfo>
|
|
|
|
<section id="Why">
|
|
<title>Why use Network Mapping</title>
|
|
|
|
<para>Network Mapping is most often used to resolve IP address conflicts.
|
|
Suppose that two organizations, A and B, need to be linked and that both
|
|
organizations have allocated the 192.168.1.0/24 subnetwork. There is a
|
|
need to connect the two networks so that all systems in A can access the
|
|
192.168.1.0/24 network in B and vice versa without any
|
|
re-addressing.</para>
|
|
</section>
|
|
|
|
<section id="Solution">
|
|
<title>Solution</title>
|
|
|
|
<para>Shorewall NETMAP support is designed to supply a solution. The basic
|
|
situation is as shown in the following diagram.<graphic
|
|
fileref="images/netmap.png"/></para>
|
|
|
|
<para>While the link between the two firewalls is shown here as a VPN, it
|
|
could be any type of interconnection that allows routing of <ulink
|
|
url="shorewall_setup_guide.htm#RFC1918">RFC 1918</ulink> traffic.</para>
|
|
|
|
<para>The systems in the top cloud will access the 192.168.1.0/24 subnet
|
|
in the lower cloud using addresses in another unused /24. Similarly, the
|
|
systems in the bottom cloud will access the 192.168.1.0/24 subnet in the
|
|
upper cloud using a second unused /24.</para>
|
|
|
|
<para>In order to apply this solution:</para>
|
|
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>You must be running Shorewall 2.0.1 Beta 2 or later.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Your kernel must have NETMAP support. 2.6 Kernels have NETMAP
|
|
support without patching while 2.4 kernels must be patched using
|
|
Patch-O-Matic from <ulink
|
|
url="http://www.netfilter.org">netfilter.org</ulink>.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>NETMAP support must be enabled in your kernel
|
|
(CONFIG_IP_NF_TARGET_NETMAP=m or CONFIG_IP_NF_TARGET_NETMAP=y).</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Your iptables must have NETMAP support. NETMAP support is
|
|
available in iptables 1.2.9 and later.</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
|
|
<para>Network mapping is defined using the
|
|
<filename>/etc/shorewall/netmap</filename> file. Columns in this file
|
|
are:</para>
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term>TYPE</term>
|
|
|
|
<listitem>
|
|
<para>Must be DNAT or SNAT.</para>
|
|
|
|
<para>If DNAT, traffic entering INTERFACE and addressed to NET1 has
|
|
its destination address rewritten to the corresponding address in
|
|
NET2.</para>
|
|
|
|
<para>If SNAT, traffic leaving INTERFACE with a source address in
|
|
NET1 has its source address rewritten to the corresponding address
|
|
in NET2.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term>NET1</term>
|
|
|
|
<listitem>
|
|
<para>Must be expressed in CIDR format (e.g., 192.168.1.0/24).
|
|
Beginning with Shorewall 4.4.24, <ulink
|
|
url="manpages/shorewall-exclusion.html">exclusion</ulink> is
|
|
supported.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term>INTERFACE</term>
|
|
|
|
<listitem>
|
|
<para>A firewall interface. This interface must have been defined in
|
|
<ulink
|
|
url="manpages/shorewall-interfaces.html"><filename>/etc/shorewall/interfaces</filename></ulink>.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term>NET2</term>
|
|
|
|
<listitem>
|
|
<para>A second network expressed in CIDR format.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">NET3 (Optional)</emphasis> -
|
|
<emphasis>network-address</emphasis></term>
|
|
|
|
<listitem>
|
|
<para>Added in Shorewall 4.4.11. If specified, qualifies INTERFACE.
|
|
It specifies a SOURCE network for DNAT rules and a DESTINATON
|
|
network for SNAT rules.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">PROTO (Optional - Added in Shorewall
|
|
4.4.23.2)</emphasis> -
|
|
<emphasis>protocol-number-or-name</emphasis></term>
|
|
|
|
<listitem>
|
|
<para>Only packets specifying this protocol will have their IP
|
|
header modified.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">DPORT (Optional - Added in Shorewall
|
|
4.4.23.2)</emphasis> -
|
|
<emphasis>port-number-or-name-list</emphasis></term>
|
|
|
|
<listitem>
|
|
<para>Destination Ports. A comma-separated list of Port names (from
|
|
services(5)), <emphasis>port number</emphasis>s or <emphasis>port
|
|
range</emphasis>s; if the protocol is <emphasis
|
|
role="bold">icmp</emphasis>, this column is interpreted as the
|
|
destination icmp-type(s). ICMP types may be specified as a numeric
|
|
type, a numberic type and code separated by a slash (e.g., 3/4), or
|
|
a typename. See <ulink
|
|
url="https://shorewall.org/configuration_file_basics.htm#ICMP">https://shorewall.org/configuration_file_basics.htm#ICMP</ulink>.</para>
|
|
|
|
<para>If the protocol is <emphasis role="bold">ipp2p</emphasis>,
|
|
this column is interpreted as an ipp2p option without the leading
|
|
"--" (example <emphasis role="bold">bit</emphasis> for bit-torrent).
|
|
If no PORT is given, <emphasis role="bold">ipp2p</emphasis> is
|
|
assumed.</para>
|
|
|
|
<para>An entry in this field requires that the PROTO column specify
|
|
icmp (1), tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if
|
|
any of the following field is supplied.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">SPORT (Optional - Added in Shorewall
|
|
4.4.23.2)</emphasis> -
|
|
<emphasis>port-number-or-name-list</emphasis></term>
|
|
|
|
<listitem>
|
|
<para>Source port(s). If omitted, any source port is acceptable.
|
|
Specified as a comma-separated list of port names, port numbers or
|
|
port ranges.</para>
|
|
|
|
<para>An entry in this field requires that the PROTO column specify
|
|
tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if any of
|
|
the following fields is supplied.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<para>Referring to the figure above, lets suppose that systems in the top
|
|
cloud are going to access the 192.168.1.0/24 network in the bottom cloud
|
|
using addresses in 10.10.10.0/24 and that systems in the bottom could will
|
|
access 192.168.1.0/24 in the top could using addresses in
|
|
10.10.11.0.<important>
|
|
<para>You must arrange for routing as follows:</para>
|
|
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>Traffic from the top cloud to 10.10.10.0/24 must be routed
|
|
to eth0 on firewall 1.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Firewall 1 must route traffic to 10.10.10.0/24 through
|
|
firewall 2.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Traffic from the bottom cloud to 10.10.11.0/24 must be
|
|
routed to eth0 on firewall 2.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Firewall 2 must route traffic to 10.10.11.0/24 through
|
|
firewall 1.</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
</important></para>
|
|
|
|
<section>
|
|
<title>If you are running Shorewall 4.4.22 or Earlier</title>
|
|
|
|
<para>The entries in
|
|
<filename><filename>/etc/shorewall/netmap</filename></filename> in
|
|
firewall1 would be as follows:</para>
|
|
|
|
<programlisting>#TYPE NET1 INTERFACE NET2
|
|
SNAT 192.168.1.0/24 vpn 10.10.11.0/24 #RULE 1A
|
|
DNAT 10.10.11.0/24 vpn 192.168.1.0/24 #RULE 1B</programlisting>
|
|
|
|
<para>The entry in <filename>/etc/shorewall/netmap</filename> in
|
|
firewall2 would be:</para>
|
|
|
|
<programlisting>#TYPE NET1 INTERFACE NET2
|
|
DNAT 10.10.10.0/24 vpn 192.168.1.0/24 #RULE 2A
|
|
SNAT 192.168.1.0/24 vpn 10.10.10.0/24 #RULE 2B</programlisting>
|
|
|
|
<example id="Example1">
|
|
<title>192.168.1.4 in the top cloud connects to 192.168.1.27 in the
|
|
bottom cloud</title>
|
|
|
|
<para>In order to make this connection, the client attempts a
|
|
connection to 10.10.10.27. The following table shows how the source
|
|
and destination IP addresses are modified as requests are sent and
|
|
replies are returned. The RULE column refers to the above
|
|
<filename>/etc/shorewall/netmap</filename> entries and gives the rule
|
|
which transforms the source and destination IP addresses to those
|
|
shown on the next line. <informaltable>
|
|
<tgroup cols="5">
|
|
<thead>
|
|
<row>
|
|
<entry>FROM</entry>
|
|
|
|
<entry>TO</entry>
|
|
|
|
<entry>SOURCE IP ADDRESS</entry>
|
|
|
|
<entry>DESTINATION IP ADDRESS</entry>
|
|
|
|
<entry>RULE</entry>
|
|
</row>
|
|
</thead>
|
|
|
|
<tbody>
|
|
<row>
|
|
<entry>192.168.1.4 in upper cloud</entry>
|
|
|
|
<entry>Firewall 1</entry>
|
|
|
|
<entry>192.168.1.4</entry>
|
|
|
|
<entry>10.10.10.27</entry>
|
|
|
|
<entry>1A</entry>
|
|
</row>
|
|
|
|
<row>
|
|
<entry>Firewall 1</entry>
|
|
|
|
<entry>Firewall 2</entry>
|
|
|
|
<entry>10.10.11.4</entry>
|
|
|
|
<entry>10.10.10.27</entry>
|
|
|
|
<entry>2A</entry>
|
|
</row>
|
|
|
|
<row>
|
|
<entry>Firewall 2</entry>
|
|
|
|
<entry>192.168.1.27 in lower cloud</entry>
|
|
|
|
<entry>10.10.11.4</entry>
|
|
|
|
<entry>192.168.1.27</entry>
|
|
|
|
<entry/>
|
|
</row>
|
|
|
|
<row>
|
|
<entry>192.168.1.27 in the lower cloud</entry>
|
|
|
|
<entry>Firewall 2</entry>
|
|
|
|
<entry>192.168.1.27</entry>
|
|
|
|
<entry>10.10.11.4</entry>
|
|
|
|
<entry>2B</entry>
|
|
</row>
|
|
|
|
<row>
|
|
<entry>Firewall 2</entry>
|
|
|
|
<entry>Firewall 1</entry>
|
|
|
|
<entry>10.10.10.27</entry>
|
|
|
|
<entry>10.10.11.4</entry>
|
|
|
|
<entry>1B</entry>
|
|
</row>
|
|
|
|
<row>
|
|
<entry>Firewall 1</entry>
|
|
|
|
<entry>192.168.1.4 in upper cloud</entry>
|
|
|
|
<entry>10.10.10.27</entry>
|
|
|
|
<entry>192.168.1.4</entry>
|
|
|
|
<entry/>
|
|
</row>
|
|
</tbody>
|
|
</tgroup>
|
|
</informaltable></para>
|
|
|
|
<para>See the<ulink url="OPENVPN.html"> OpenVPN documentation</ulink>
|
|
for a solution contributed by Nicola Moretti for resolving duplicate
|
|
networks in a roadwarrior VPN environment.</para>
|
|
</example>
|
|
</section>
|
|
|
|
<section>
|
|
<title>If you are running Shorewall 4.4.23 or Later</title>
|
|
|
|
<para>Beginning with Shorewall 4.4.23, you <emphasis>can</emphasis>
|
|
bridge two duplicate networks with one router, provided that your kernel
|
|
and iptables include <emphasis>Rawpost Table Support</emphasis>. That
|
|
support is used to implement Stateless NAT which allows for performing
|
|
DNAT in the rawpost table POSTROUTING and OUTPUT chains and for
|
|
performing SNAT in the raw table PREROUTING chain. Using this support,
|
|
only firewall1 requires <filename>/etc/shorewall/netmap</filename>. Two
|
|
additional entries are added.</para>
|
|
|
|
<programlisting>#TYPE NET1 INTERFACE NET2
|
|
SNAT 192.168.1.0/24 vpn 10.10.11.0/24
|
|
DNAT 10.10.11.0/24 vpn 192.168.1.0/24
|
|
<emphasis role="bold">SNAT:P 192.168.1.0/24 vpn 10.10.10.0/24
|
|
DNAT:T 10.10.10.0/24 vpn 192.168.1.0/24</emphasis></programlisting>
|
|
|
|
<para>The last two entries define <firstterm>Stateless NAT</firstterm>
|
|
by specifying a chain designator (:P for PREROUTING and :T for
|
|
POSTROUTING respectively). See <ulink
|
|
url="manpages/shorewall-netmap.html">shorewall-netmap</ulink> (5) for
|
|
details.</para>
|
|
</section>
|
|
</section>
|
|
|
|
<section>
|
|
<title>IPv6</title>
|
|
|
|
<para>Beginning with Shorewall6 4.4.24, IPv6 support for Netmap is
|
|
included. This provides a way to use private IPv6 addresses internally and
|
|
still have access to the IPv6 internet.</para>
|
|
|
|
<warning>
|
|
<para>IPv6 netmap is <firstterm>stateless</firstterm> which means that
|
|
there are no Netfilter helpers for applications that need them. As a
|
|
consequence, applications that require a helper (FTP, IRC, etc.) may
|
|
experience issues.</para>
|
|
</warning>
|
|
|
|
<para>For IPv6, the chain designator (:P for PREROUTING or :T for
|
|
POSTROUTING) is required in the TYPE column. Normally SNAT rules are
|
|
placed in the POSTROUTING chain while DNAT rules are placed in
|
|
PREROUTING.</para>
|
|
|
|
<para>To use IPv6 Netmap, your kernel and iptables must include
|
|
<emphasis>Rawpost Table Support</emphasis>.</para>
|
|
|
|
<para>IPv6 Netmap has been verified at shorewall.net using the
|
|
configuration shown below.</para>
|
|
|
|
<graphic align="center" fileref="images/Network2011b.png"/>
|
|
|
|
<para>IPv6 support is supplied from Hurricane Electric; the IPv6 address
|
|
block is 2001:470:b:227::/64.</para>
|
|
|
|
<para>Because of the limitations of IPv6 NETMAP (no Netfilter helpers),
|
|
the servers in the DMZ have public addresses in the block
|
|
2001:470:b:227::/112. The local LAN uses the private network
|
|
fd00:470:b:227::/64 with the hosts autoconfigured using radvd. This block
|
|
is allocated from the range (fc00::/7) reserved for<firstterm> <ulink
|
|
url="http://en.wikipedia.org/wiki/Unique_local_address">Unique Local
|
|
Addresses</ulink></firstterm>.</para>
|
|
|
|
<para>The /etc/shorewall6/netmap file is as follows:</para>
|
|
|
|
<programlisting>#TYPE NET1 INTERFACE NET2 NET3 PROTO DEST SOURCE
|
|
# PORT(S) PORT(S)
|
|
SNAT:T fd00:470:b:227::/64 HE_IF 2001:470:b:227::/64
|
|
DNAT:P 2001:470:b:227::/64!2001:470:b:227::/112\
|
|
HE_IF fd00:470:b:227::/64
|
|
</programlisting>
|
|
|
|
<para>HE_IF is the logical name for interface sit1. On output, the private
|
|
address block is mapped to the public block. Because autoconfiguration is
|
|
used, none of the local addresses falls into the range
|
|
fd00:470:b:227::/112. That range can therefore be excluded from
|
|
DNAT.</para>
|
|
|
|
<note>
|
|
<para>While the site local network that was used is very similar to the
|
|
public network (only the first word is different), that isn't a
|
|
requirement. We could have just as well used
|
|
fd00:bad:dead:beef::/64</para>
|
|
</note>
|
|
|
|
<note>
|
|
<para>The MacBook Pro running OS X Lion refused to autoconfigure when
|
|
radvd advertised a <ulink
|
|
url="http://tools.ietf.org/html/rfc3513">site-local</ulink> network
|
|
(fec0:470:b:227/64) but worked fine with the unique-local network
|
|
(fd00:470:b:227::/64). Note that site-local addresses were deprecated in
|
|
<ulink url="http://tools.ietf.org/html/rfc3879">RFC3879</ulink>.</para>
|
|
</note>
|
|
|
|
<note>
|
|
<para>This whole scheme isn't quite as useful as it might appear. Many
|
|
IPv6-enabled applications (web browsers, for example) are smart enough
|
|
to recognize unique local addresses and will only use IPv6 to
|
|
communicate with other such local addresses.</para>
|
|
</note>
|
|
</section>
|
|
</article>
|