extern/shorewall_code
1
0
Fork 1
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-23 14:48:51 +01:00
Code Issues Packages Projects Releases Wiki Activity
ca7ca4bdfe
shorewall_code/Shorewall/manpages/shorewall.xml
Tom Eastep ca7ca4bdfe
Add a 'timeout' option to DYNAMIC_BLACKLIST 
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2016-10-05 12:56:47 -07:00

2683 lines
106 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall</refentrytitle>
<manvolnum>8</manvolnum>
<refmiscinfo>Administrative Commands</refmiscinfo>
</refmeta>
<refnamediv>
<refname>shorewall</refname>
<refpurpose>Administration tool for Shoreline Firewall
(Shorewall)</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg rep="norepeat">-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>add {</option></arg>
<arg choice="plain"
rep="repeat"><replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]</arg>
<arg choice="plain"><replaceable>zone</replaceable><option>
|</option><replaceable> zone host-list</replaceable><option>
}</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>allow</option></arg>
<arg choice="plain"><replaceable>address</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>blacklist</option></arg>
<arg
choice="plain"><replaceable>address</replaceable><arg><replaceable>option</replaceable>
...</arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>call</option></arg>
<arg
choice="plain"><replaceable>function</replaceable><arg><replaceable>parameter</replaceable>
...</arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><arg><option>check | ck </option></arg></arg>
<arg><option>-e</option></arg>
<arg><option>-d</option></arg>
<arg><option>-p</option></arg>
<arg><option>-r</option></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>clear</option><arg><option>-f</option></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>close</option><arg choice="req">
<replaceable>open-number</replaceable> |
<replaceable>source</replaceable><replaceable>dest</replaceable><arg><replaceable>protocol</replaceable><arg>
<replaceable>port</replaceable> </arg></arg></arg><replaceable>
</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><arg><option>compile | co </option></arg></arg>
<arg><option>-e</option></arg>
<arg><option>-c</option></arg>
<arg><option>-d</option></arg>
<arg><option>-p</option></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><replaceable>directory</replaceable></arg>
<arg choice="opt"><replaceable>pathname</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg rep="norepeat">-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>delete {</option></arg>
<arg choice="plain"
rep="repeat"><replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]</arg>
<arg choice="plain"><replaceable>zone</replaceable><option>
|</option><replaceable> zone host-list</replaceable><option>
}</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>disable</option></arg>
<arg choice="plain">{ <replaceable>interface</replaceable> |
<replaceable>provider</replaceable> }</arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>drop</option></arg>
<arg choice="plain"><replaceable>address</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>dump</option></arg>
<arg><option>-x</option></arg>
<arg><option>-l</option></arg>
<arg><option>-m</option></arg>
<arg><option>-c</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>enable</option></arg>
<arg choice="plain">{ <replaceable>interface</replaceable> |
<replaceable>provider</replaceable> }</arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>export</option></arg>
<arg choice="opt"><replaceable>directory1</replaceable></arg>
<arg
choice="plain">[<replaceable>user</replaceable>@]<replaceable>system</replaceable>[<option>:</option><replaceable>directory2</replaceable>]</arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>forget</option></arg>
<arg><replaceable>filename</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>help</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>hits</option><arg><option>-t</option></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>ipcalc</option></arg>
<group choice="req">
<arg choice="plain"><replaceable>address</replaceable>
<replaceable>mask</replaceable></arg>
<arg
choice="plain"><replaceable>address</replaceable>/<replaceable>vlsm</replaceable></arg>
</group>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>iprange</option></arg>
<arg
choice="plain"><replaceable>address1</replaceable><option>-</option><replaceable>address2</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>iptrace</option></arg>
<arg choice="plain"><replaceable>iptables match
expression</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>logdrop</option></arg>
<arg choice="plain"><replaceable>address</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>logwatch</option></arg>
<arg><option>-m</option></arg>
<arg><replaceable>refresh-interval</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>logreject</option></arg>
<arg choice="plain"><replaceable>address</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>noiptrace</option></arg>
<arg choice="plain"><replaceable>iptables match
expression</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>open</option><replaceable>
source</replaceable><replaceable> dest</replaceable><arg>
<replaceable>protocol</replaceable><arg> <replaceable>port</replaceable>
</arg> </arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>reenable</option></arg>
<arg choice="plain">{ <replaceable>interface</replaceable> |
<replaceable>provider</replaceable> }</arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>refresh</option><arg><option>-n</option></arg><arg><option>-d</option></arg><arg><option>-T</option></arg><arg><option>-i</option></arg><arg>-<option>D</option>
<replaceable>directory</replaceable> </arg><arg
rep="repeat"><replaceable>chain</replaceable></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>reject</option></arg>
<arg choice="plain"><replaceable>address</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>remote-start</option></arg>
<arg><option>-s</option></arg>
<arg><option>-c</option></arg>
<arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><replaceable>directory</replaceable></arg>
<arg choice="plain"><replaceable>system</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>remote-reload</option></arg>
<arg><option>-s</option></arg>
<arg><option>-c</option></arg>
<arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><replaceable>directory</replaceable></arg>
<arg choice="plain"><replaceable>system</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>remote-restart</option></arg>
<arg><option>-s</option></arg>
<arg><option>-c</option></arg>
<arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><replaceable>directory</replaceable></arg>
<arg choice="plain"><replaceable>system</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>reset</option><arg><replaceable>chain</replaceable>
...</arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>restart</option></arg>
<arg><option>-n</option></arg>
<arg><option>-p</option><arg><option>-d</option></arg></arg>
<arg><option>-f</option></arg>
<arg><option>-c</option></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><option>-C</option></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>restore</option><arg><option>-n</option></arg><arg><option>-p</option></arg><arg><option>-C</option></arg></arg>
<arg><replaceable>filename</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>run</option></arg>
<arg choice="plain"><replaceable>command</replaceable></arg>
<arg><replaceable>parameter ...</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>safe-restart</option></arg>
<arg><option>-d</option></arg>
<arg><option>-p</option></arg>
<arg><option>-t</option> <replaceable>timeout</replaceable></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>safe-start</option></arg>
<arg><option>-d</option></arg>
<arg><option>-p</option></arg>
<arg><option>-t</option> <replaceable>timeout</replaceable></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>save</option><arg><option>-C</option></arg></arg>
<arg choice="opt"><replaceable>filename</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>savesets</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-x</option></arg>
<arg choice="plain"><option>{bl|blacklists}</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-b</option></arg>
<arg><option>-x</option></arg>
<arg><option>-l</option></arg>
<arg><option>-t</option>
{<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw|rawpost</option>}</arg>
<arg><arg choice="plain"
rep="repeat"><replaceable>chain</replaceable></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-f</option></arg>
<arg choice="plain"><option>capabilities</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg
choice="req"><option>actions|classifiers|connections|config|events|filters|ip|ipa|macros|zones|policies|marks</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg choice="plain"><option>event</option><arg
choice="plain"><replaceable>event</replaceable></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-c</option></arg>
<arg choice="plain"><option>routing</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg choice="plain"><option>macro</option><arg
choice="plain"><replaceable>macro</replaceable></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-x</option></arg>
<arg choice="req"><option>mangle|nat|raw|rawpost</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg choice="plain"><option>tc</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-m</option></arg>
<arg choice="plain"><option>log</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>start</option></arg>
<arg><option>-n</option></arg>
<arg><option>-f</option></arg>
<arg><option>-p</option></arg>
<arg><option>-c</option></arg>
<arg><option>-T</option><arg><option>-i</option></arg></arg>
<arg><option>-C</option></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>stop</option><arg><option>-f</option></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><arg
choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>try</option></arg>
<arg choice="plain"><replaceable>directory</replaceable></arg>
<arg><replaceable>timeout</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg choice="plain"><option>update</option></arg>
<arg><option>-b</option></arg>
<arg><option>-d</option></arg>
<arg><option>-r</option></arg>
<arg><option>-T</option></arg>
<arg><option>-a</option></arg>
<arg><option>-i</option></arg>
<arg><option>-A</option></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>-<replaceable>options</replaceable></arg>
<arg
choice="plain"><option>version</option><arg><option>-a</option></arg></arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>The shorewall utility is used to control the Shoreline Firewall
(Shorewall).</para>
</refsect1>
<refsect1>
<title>Options</title>
<para>The <option>trace</option> and <option>debug</option> options are
used for debugging. See <ulink
url="/starting_and_stopping_shorewall.htm#Trace">http://www.shorewall.net/starting_and_stopping_shorewall.htm#Trace</ulink>.</para>
<para>The <option>nolock</option> option prevents the command from
attempting to acquire the Shorewall lockfile. It is useful if you need to
include <command>shorewall</command> commands in
<filename>/etc/shorewall/started</filename>.</para>
<para>The <emphasis>options</emphasis> control the amount of output that
the command produces. They consist of a sequence of the letters <emphasis
role="bold">v</emphasis> and <emphasis role="bold">q</emphasis>. If the
options are omitted, the amount of output is determined by the setting of
the VERBOSITY parameter in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). Each
<emphasis role="bold">v</emphasis> adds one to the effective verbosity and
each <emphasis role="bold">q</emphasis> subtracts one from the effective
VERBOSITY. Alternatively, <emphasis role="bold">v</emphasis> may be
followed immediately with one of -1,0,1,2 to specify a specify VERBOSITY.
There may be no white-space between <emphasis role="bold">v</emphasis> and
the VERBOSITY.</para>
<para>The <emphasis>options</emphasis> may also include the letter
<option>t</option> which causes all progress messages to be
timestamped.</para>
</refsect1>
<refsect1>
<title>Commands</title>
<para>The available commands are listed below.</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">add </emphasis>{
<replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
<replaceable>zone</replaceable> | <replaceable>zone</replaceable>
<replaceable>host-list</replaceable> }</term>
<listitem>
<para>Adds a list of hosts or subnets to a dynamic zone usually used
with VPN's.</para>
<para>The <emphasis>interface</emphasis> argument names an interface
defined in the <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
file. A <emphasis>host-list</emphasis> is comma-separated list whose
elements are host or network addresses.<caution>
<para>The <command>add</command> command is not very robust. If
there are errors in the <replaceable>host-list</replaceable>,
you may see a large number of error messages yet a subsequent
<command>shorewall show zones</command> command will indicate
that all hosts were added. If this happens, replace
<command>add</command> by <command>delete</command> and run the
same command again. Then enter the correct command.</para>
</caution></para>
<para>Beginning with Shorewall 4.5.9, the <emphasis
role="bold">dynamic_shared</emphasis> zone option (<ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5))
allows a single ipset to handle entries for multiple interfaces.
When that option is specified for a zone, the <command>add</command>
command has the alternative syntax in which the
<replaceable>zone</replaceable> name precedes the
<replaceable>host-list</replaceable>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">allow</emphasis>
<replaceable>address</replaceable></term>
<listitem>
<para>Re-enables receipt of packets from hosts previously
blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
role="bold">logdrop</emphasis>, <emphasis
role="bold">reject</emphasis>, or <emphasis
role="bold">logreject</emphasis> command. Beginning with Shorewall
5.0.10, this command can also re-enable addresses blacklisted using
the <command>blacklist</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">blacklist</emphasis>
<replaceable>address</replaceable> [ <replaceable>option</replaceable>
... ]</term>
<listitem>
<para>Added in Shorewall 5.0.8 and requires
DYNAMIC_BLACKLIST=ipset.. in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).
Causes packets from the given host or network
<replaceable>address</replaceable> to be dropped, based on the
setting of BLACKLIST in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). The
<replaceable>address</replaceable> along with any
<replaceable>option</replaceable>s are passed to the <command>ipset
add</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">call <replaceable>function</replaceable> [
<replaceable>parameter</replaceable> ... ]</emphasis></term>
<listitem>
<para>Added in Shorewall 4.6.10. Allows you to call a function in
one of the Shorewall libraries or in your compiled script. function
must name the shell function to be called. The listed parameters are
passed to the function.</para>
<para>The function is first searched for in
<filename>lib.base</filename>, <filename>lib.common</filename>,
<filename>lib.cli</filename> and <filename>lib.cli-std</filename>.
If it is not found, the call command is passed to the generated
script to be executed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">check</emphasis> [-<option>e</option>]
[-<option>d</option>] [-<option>p</option>] [-<option>r</option>]
[-<option>T</option>] [-<option>i</option>]
[<replaceable>directory</replaceable>]</term>
<listitem>
<para>Compiles the configuration in the specified
<emphasis>directory</emphasis> and discards the compiled output
script. If no <emphasis>directory</emphasis> is given, then
/etc/shorewall is assumed.</para>
<para>The <emphasis role="bold">-e</emphasis> option causes the
compiler to look for a file named capabilities. This file is
produced using the command <emphasis role="bold">shorewall-lite show
-f capabilities &gt; capabilities</emphasis> on a system with
Shorewall Lite installed.</para>
<para>The <option>-d</option> option causes the compiler to be run
under control of the Perl debugger.</para>
<para>The <option>-p</option> option causes the compiler to be
profiled via the Perl <option>-wd:DProf</option> command-line
option.</para>
<para>The <option>-r</option> option was added in Shorewall 4.5.2
and causes the compiler to print the generated ruleset to standard
out.</para>
<para>The <option>-T</option> option was added in Shorewall 4.4.20
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">clear</emphasis>
[-<option>f</option>]</term>
<listitem>
<para>Clear will remove all rules and chains installed by Shorewall.
The firewall is then wide open and unprotected. Existing connections
are untouched. Clear is often used to see if the firewall is causing
connection problems.</para>
<para>If <option>-f</option> is given, the command will be processed
by the compiled script that executed the last successful <emphasis
role="bold">start</emphasis>, <emphasis
role="bold">restart</emphasis> or <emphasis
role="bold">refresh</emphasis> command if that script exists.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">close</emphasis> {
<replaceable>open-number</replaceable> |
<replaceable>source</replaceable> <replaceable>dest</replaceable> [
<replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
] ] }</term>
<listitem>
<para>Added in Shorewall 4.5.8. This command closes a temporary open
created by the <command>open</command> command. In the first form,
an <replaceable>open-number</replaceable> specifies the open to be
closed. Open numbers are displayed in the <emphasis
role="bold">num</emphasis> column of the output of the
<command>shorewall show opens </command>command.</para>
<para>When the second form of the command is used, the parameters
must match those given in the earlier <command>open</command>
command.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">compile </emphasis>[-<option>e</option>]
[-<option>c</option>] [-<option>d</option>] [-<option>p</option>]
[-<option>T</option>] [-<option>i</option>] [<replaceable> directory
</replaceable>] [<replaceable> pathname</replaceable> ]</term>
<listitem>
<para>Compiles the current configuration into the executable file
<emphasis>pathname</emphasis>. If a
<replaceable>directory</replaceable> is supplied, Shorewall will
look in that directory first for configuration files. If the
<emphasis>pathname</emphasis> is omitted, the file
<filename>firewall</filename> in the VARDIR (normally <filename
class="directory">/var/lib/shorewall/</filename>) is assumed. A
<emphasis>pathname</emphasis> of '-' causes the compiler to send the
generated script to it's standard output file. Note that '-v-1' is
usually specified in this case (e.g., <command>shorewall -v-1
compile -- -</command>) to suppress the 'Compiling...' message
normally generated by <filename>/sbin/shorewall</filename>.</para>
<para>When <option>-e</option> is specified, the compilation is
being performed on a system other than where the compiled script
will run. This option disables certain configuration options that
require the script to be compiled where it is to be run. The use of
<option>-e</option> requires the presence of a configuration file
named <filename>capabilities</filename> which may be produced using
the command <command>shorewall-lite show -f capabilities &gt;
capabilities</command> on a system with Shorewall Lite
installed</para>
<para>The <option>-c</option> option was added in Shorewall 4.5.17
and causes conditional compilation of a script. The script specified
by <replaceable>pathname</replaceable> (or implied if <emphasis
role="bold">pathname</emphasis> is omitted) is compiled if it
doesn't exist or if there is any file in the
<replaceable>directory</replaceable> or in a directory on the
CONFIG_PATH that has a modification time later than the file to be
compiled. When no compilation is needed, a message is issued and an
exit status of zero is returned.</para>
<para>The <option>-d</option> option causes the compiler to be run
under control of the Perl debugger.</para>
<para>The <option>-p</option> option causes the compiler to be
profiled via the Perl <option>-wd:DProf</option> command-line
option.</para>
<para>The <option>-T</option> option was added in Shorewall 4.4.20
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">delete </emphasis>{
<replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
<replaceable>zone</replaceable> | <replaceable>zone</replaceable>
<replaceable>host-list</replaceable> }</term>
<listitem>
<para>The delete command reverses the effect of an earlier <emphasis
role="bold">add</emphasis> command.</para>
<para>The <emphasis>interface</emphasis> argument names an interface
defined in the <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
file. A <emphasis>host-list</emphasis> is comma-separated list whose
elements are a host or network address.</para>
<para>Beginning with Shorewall 4.5.9, the <emphasis
role="bold">dynamic_shared</emphasis> zone option (<ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5))
allows a single ipset to handle entries for multiple interfaces.
When that option is specified for a zone, the
<command>delete</command> command has the alternative syntax in
which the <replaceable>zone</replaceable> name precedes the
<replaceable>host-list</replaceable>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">disable </emphasis>{
<replaceable>interface</replaceable> |
<replaceable>provider</replaceable> }</term>
<listitem>
<para>Added in Shorewall 4.4.26. Disables the optional provider
associated with the specified <replaceable>interface</replaceable>
or <replaceable>provider</replaceable>. Where more than one provider
share a single network interface, a
<replaceable>provider</replaceable> name must be given.</para>
<para>Beginning with Shorewall 4.5.10, this command may be used with
any optional network interface. <replaceable>interface</replaceable>
may be either the logical or physical name of the interface. The
command removes any routes added from <ulink
url="/manpages/shorewall-routes.html">shorewall-routes</ulink>(5)
and any traffic shaping configuration for the interface.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">drop</emphasis>
<replaceable>address</replaceable></term>
<listitem>
<para>Causes traffic from the listed <emphasis>address</emphasis>es
to be silently dropped.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">dump </emphasis> [-<option>x</option>]
[-<option>l</option>] [-<option>m</option>]
[-<option>c</option>]</term>
<listitem>
<para>Produces a verbose report about the firewall configuration for
the purpose of problem analysis.</para>
<para>The <emphasis role="bold">-x</emphasis> option causes actual
packet and byte counts to be displayed. Without that option, these
counts are abbreviated.</para>
<para>The <emphasis role="bold">-m</emphasis> option causes any MAC
addresses included in Shorewall log messages to be displayed.</para>
<para>The <emphasis role="bold">-l</emphasis> option causes the rule
number for each Netfilter rule to be displayed.</para>
<para>The <option>-c</option> option causes the route cache to be
dumped in addition to the other routing information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">enable </emphasis>{
<replaceable>interface</replaceable> |
<replaceable>provider</replaceable> }</term>
<listitem>
<para>Added in Shorewall 4.4.26. Enables the optional provider
associated with the specified <replaceable>interface</replaceable>
or <replaceable>provider</replaceable>. Where more than one provider
share a single network interface, a
<replaceable>provider</replaceable> name must be given.</para>
<para>Beginning with Shorewall 4.5.10, this command may be used with
any optional network interface. <replaceable>interface</replaceable>
may be either the logical or physical name of the interface. The
command sets <filename>/proc</filename> entries for the interface,
adds any route specified in <ulink
url="/manpages/shorewall-routes.html">shorewall-routes</ulink>(5)
and installs the interface's traffic shaping configuration, if
any.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">export </emphasis>[<replaceable>
directory1</replaceable> ] [<replaceable>
user</replaceable>@]<replaceable>system</replaceable>[:<replaceable>directory2</replaceable>
]</term>
<listitem>
<para>If <emphasis>directory1</emphasis> is omitted, the current
working directory is assumed.</para>
<para>Allows a non-root user to compile a shorewall script and stage
it on a system (provided that the user has access to the system via
ssh). The command is equivalent to:</para>
<programlisting> <emphasis role="bold">/sbin/shorewall compile -e</emphasis> <emphasis>directory1</emphasis> <emphasis>directory1</emphasis><emphasis
role="bold">/firewall &amp;&amp;\</emphasis>
<emphasis role="bold">scp</emphasis> directory1<emphasis role="bold">/firewall</emphasis> <emphasis>directory1</emphasis><emphasis
role="bold">/firewall.conf</emphasis> [<emphasis>user</emphasis>@]<emphasis
role="bold">system</emphasis>:[<emphasis>directory2</emphasis>]</programlisting>
<para>In other words, the configuration in the specified (or
defaulted) directory is compiled to a file called firewall in that
directory. If compilation succeeds, then firewall and firewall.conf
are copied to <emphasis>system</emphasis> using scp.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">forget</emphasis> [
<replaceable>filename</replaceable> ]</term>
<listitem>
<para>Deletes /var/lib/shorewall/<emphasis>filename</emphasis> and
/var/lib/shorewall/save. If no <emphasis>filename</emphasis> is
given then the file specified by RESTOREFILE in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5) is
assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">help</emphasis></term>
<listitem>
<para>Displays a syntax summary.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">hits</emphasis>
[-<option>t</option>]</term>
<listitem>
<para>Generates several reports from Shorewall log messages in the
current log file. If the <option>-t</option> option is included, the
reports are restricted to log messages generated today.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ipcalc</emphasis> { address mask |
address/vlsm }</term>
<listitem>
<para>Ipcalc displays the network address, broadcast address,
network in CIDR notation and netmask corresponding to the
input[s].</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">iprange
</emphasis><replaceable>address1</replaceable>-<replaceable>address2</replaceable></term>
<listitem>
<para>Iprange decomposes the specified range of IP addresses into
the equivalent list of network/host addresses.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">iptrace</emphasis> <replaceable>iptables
match expression</replaceable></term>
<listitem>
<para>This is a low-level debugging command that causes iptables
TRACE log records to be created. See iptables(8) for details.</para>
<para>The <replaceable>iptables match expression</replaceable> must
be one or more matches that may appear in both the raw table OUTPUT
and raw table PREROUTING chains.</para>
<para>The log message destination is determined by the
currently-selected IPv4 <ulink
url="/shorewall_logging.html#Backends">logging
backend</ulink>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">list</emphasis></term>
<listitem>
<para><command>list</command> is a synonym for
<command>show</command> -- please see below.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">logdrop</emphasis>
<replaceable>address</replaceable></term>
<listitem>
<para>Causes traffic from the listed <emphasis>address</emphasis>es
to be logged then discarded. Logging occurs at the log level
specified by the BLACKLIST_LOGLEVEL setting in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>
(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">logwatch </emphasis>[-<option>m</option>]
[<replaceable> refresh-interval </replaceable>]</term>
<listitem>
<para>Monitors the log file specified by the LOGFILE option in
<ulink url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
and produces an audible alarm when new Shorewall messages are
logged. The <emphasis role="bold">-m</emphasis> option causes the
MAC address of each packet source to be displayed if that
information is available. The
<replaceable>refresh-interval</replaceable> specifies the time in
seconds between screen refreshes. You can enter a negative number by
preceding the number with "--" (e.g., <command>shorewall logwatch --
-30</command>). In this case, when a packet count changes, you will
be prompted to hit any key to resume screen refreshes.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">logreject</emphasis><replaceable>
address</replaceable></term>
<listitem>
<para>Causes traffic from the listed <emphasis>address</emphasis>es
to be logged then rejected. Logging occurs at the log level
specified by the BLACKLIST_LOGLEVEL setting in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>
(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ls</emphasis></term>
<listitem>
<para><command>ls</command> is a synonym for <command>show</command>
-- please see below.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">noiptrace </emphasis><replaceable>iptables
match expression</replaceable></term>
<listitem>
<para>This is a low-level debugging command that cancels a trace
started by a preceding <command>iptrace</command> command.</para>
<para>The <replaceable>iptables match expression</replaceable> must
be one given in the <command>iptrace</command> command being
canceled.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">open</emphasis>
<replaceable>source</replaceable> <replaceable>dest</replaceable> [
<replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
] ]</term>
<listitem>
<para>Added in Shorewall 4.6.8. This command requires that the
firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
<ulink url="/manpages/shorewall.conf.html">shorewall.conf
(5)</ulink>. The effect of the command is to temporarily open the
firewall for connections matching the parameters.</para>
<para>The <replaceable>source</replaceable> and
<replaceable>dest</replaceable> parameters may each be specified as
<emphasis role="bold">all</emphasis> if you don't wish to restrict
the connection source or destination respectively. Otherwise, each
must contain a host or network address or a valid DNS name.</para>
<para>The <replaceable>protocol</replaceable> may be specified
either as a number or as a name listed in /etc/protocols. The
<replaceable>port</replaceable> may be specified numerically or as a
name listed in /etc/services.</para>
<para>To reverse the effect of a successful <command>open</command>
command, use the <command>close</command> command with the same
parameters or simply restart the firewall.</para>
<para>Example: To open the firewall for SSH connections to address
192.168.1.1, the command would be:</para>
<programlisting> shorewall open all 192.168.1.1 tcp 22</programlisting>
<para>To reverse that command, use:</para>
<programlisting> shorewall close all 192.168.1.1 tcp 22</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">reenable</emphasis>{
<replaceable>interface</replaceable> |
<replaceable>provider</replaceable> }</term>
<listitem>
<para>Added in Shorewall 4.6.9. This is equivalent to a
<command>disable</command> command followed by an
<command>enable</command> command on the specified
<replaceable>interface</replaceable> or
<replaceable>provider</replaceable>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">refresh </emphasis> [-<option>n</option>]
[-<option>d</option>] [-<option>T</option>] [-i] [-<option>D
</option><replaceable>directory</replaceable> ] [
<replaceable>chain</replaceable>... ]</term>
<listitem>
<para>All steps performed by <command>restart</command> are
performed by <command>refresh</command> with the exception that
<command>refresh</command> only recreates the chains specified in
the command while <command>restart</command> recreates the entire
Netfilter ruleset. If no <replaceable>chain</replaceable> is given,
the static blacklisting chain <emphasis
role="bold">blacklst</emphasis> is assumed.</para>
<para>The listed chains are assumed to be in the filter table. You
can refresh chains in other tables by prefixing the chain name with
the table name followed by ":" (e.g., nat:net_dnat). Chain names
which follow are assumed to be in that table until the end of the
list or until an entry in the list names another table. Built-in
chains such as FORWARD may not be refreshed.</para>
<para>The <option>-n</option> option was added in Shorewall 4.5.3
causes Shorewall to avoid updating the routing table(s).</para>
<para>The <option>-d</option> option was added in Shorewall 4.5.3
causes the compiler to run under the Perl debugger.</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
<para>The <option>-D</option> option was added in Shorewall 4.5.3
and causes Shorewall to look in the given
<emphasis>directory</emphasis> first for configuration files.</para>
<para>Example:<programlisting><command>shorewall refresh net2fw nat:net_dnat</command> #Refresh the 'net2loc' chain in the filter table and the 'net_dnat' chain in the nat table</programlisting></para>
<para>The <emphasis role="bold">refresh</emphasis> command has
slightly different behavior. When no chain name is given to the
<emphasis role="bold">refresh</emphasis> command, the mangle table
is refreshed along with the blacklist chain (if any). This allows
you to modify <filename>/etc/shorewall/tcrules </filename>and
install the changes using <emphasis
role="bold">refresh</emphasis>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">reject</emphasis><replaceable>
address</replaceable></term>
<listitem>
<para>Causes traffic from the listed <emphasis>address</emphasis>es
to be silently rejected.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">reload </emphasis>[-<option>n</option>]
[-<option>p</option>] [-<option>d</option>] [-<option>f</option>]
[-<option>c</option>] [-<option>T</option>] [-<option>i</option>]
[-<option>C</option>] [ <replaceable>directory</replaceable> ]</term>
<listitem>
<para>This command was re-implemented in Shorewall 5.0.0. The
pre-5.0.0 <command>reload</command> command is now called
<command>remote-restart</command> (see below).</para>
<para>Reload is similar to <emphasis role="bold">shorewall
start</emphasis> except that it assumes that the firewall is already
started. Existing connections are maintained. If a
<emphasis>directory</emphasis> is included in the command, Shorewall
will look in that <emphasis>directory</emphasis> first for
configuration files.</para>
<para>The <option>-n</option> option causes Shorewall to avoid
updating the routing table(s).</para>
<para>The <option>-p</option> option causes the connection tracking
table to be flushed; the <command>conntrack</command> utility must
be installed to use this option.</para>
<para>The <option>-d</option> option causes the compiler to run
under the Perl debugger.</para>
<para>The <option>-f</option> option suppresses the compilation step
and simply reused the compiled script which last started/restarted
Shorewall, provided that /etc/shorewall and its contents have not
been modified since the last start/restart.</para>
<para>The <option>-c</option> option was added in Shorewall 4.4.20
and performs the compilation step unconditionally, overriding the
AUTOMAKE setting in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). When
both <option>-f</option> and <option>-c</option> are present, the
result is determined by the option that appears last.</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
<para>The <option>-C</option> option was added in Shorewall 4.6.5
and is only meaningful when AUTOMAKE=Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). If an
existing firewall script is used and if that script was the one that
generated the current running configuration, then the running
netfilter configuration will be reloaded as is so as to preserve the
iptables packet and byte counters.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">remote-start</emphasis>
[-<option>s</option>] [-<option>c</option>] [-<option>r</option>
<replaceable>root-user-name</replaceable>] [-<option>T</option>]
[-<option>i</option>] [ <replaceable>directory</replaceable> ]
<replaceable>system</replaceable></term>
<listitem>
<para>This command was renamed from <command>load</command> in
Shorewall 5.0.0.</para>
<para>If <emphasis>directory</emphasis> is omitted, the current
working directory is assumed. Allows a non-root user to compile a
shorewall script and install it on a system (provided that the user
has root access to the system via ssh). The command is equivalent
to:</para>
<programlisting> <emphasis role="bold">/sbin/shorewall compile -e</emphasis> <emphasis><replaceable>directory</replaceable></emphasis> <replaceable>directory</replaceable><emphasis
role="bold">/firewall &amp;&amp;\</emphasis>
<emphasis role="bold">scp</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall.conf</emphasis> <emphasis role="bold">root@</emphasis><replaceable>system</replaceable><emphasis
role="bold">:/var/lib/shorewall-lite/ &amp;&amp;\</emphasis>
<emphasis role="bold">ssh root@</emphasis><replaceable>system</replaceable> <emphasis
role="bold">'/sbin/shorewall-lite start'</emphasis></programlisting>
<para>In other words, the configuration in the specified (or
defaulted) directory is compiled to a file called firewall in that
directory. If compilation succeeds, then firewall is copied to
<replaceable>system</replaceable> using scp. If the copy succeeds,
Shorewall Lite on <replaceable>system</replaceable> is started via
ssh.</para>
<para>If <emphasis role="bold">-s</emphasis> is specified and the
<emphasis role="bold">start</emphasis> command succeeds, then the
remote Shorewall-lite configuration is saved by executing <emphasis
role="bold">shorewall-lite save</emphasis> via ssh.</para>
<para>if <emphasis role="bold">-c</emphasis> is included, the
command <emphasis role="bold">shorewall-lite show capabilities -f
&gt; /var/lib/shorewall-lite/capabilities</emphasis> is executed via
ssh then the generated file is copied to
<replaceable>directory</replaceable> using scp. This step is
performed before the configuration is compiled.</para>
<para>If <option>-r</option> is included, it specifies that the root
user on <replaceable>system</replaceable> is named
<replaceable>root-user-name</replaceable> rather than "root".</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">remote-reload
</emphasis>[-<option>s</option>] [-<option>c</option>]
[-<option>r</option> <replaceable>root-user-name</replaceable>]
[-<option>T</option>] [-<option>i</option>] [
<replaceable>directory</replaceable> ]
<replaceable>system</replaceable></term>
<listitem>
<para>This command was added in Shorewall 5.0.0.</para>
<para>If <emphasis>directory</emphasis> is omitted, the current
working directory is assumed. Allows a non-root user to compile a
shorewall script and install it on a system (provided that the user
has root access to the system via ssh). The command is equivalent
to:</para>
<programlisting> <emphasis role="bold">/sbin/shorewall compile -e</emphasis> <emphasis>directory</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall &amp;&amp;\</emphasis>
<emphasis role="bold">scp</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall.conf</emphasis> <emphasis role="bold">root@</emphasis><emphasis>system</emphasis><emphasis
role="bold">:/var/lib/shorewall-lite/ &amp;&amp;\</emphasis>
<emphasis role="bold">ssh root@</emphasis><emphasis>system</emphasis> <emphasis
role="bold">'/sbin/shorewall-lite reload'</emphasis></programlisting>
<para>In other words, the configuration in the specified (or
defaulted) directory is compiled to a file called firewall in that
directory. If compilation succeeds, then firewall is copied to
<emphasis>system</emphasis> using scp. If the copy succeeds,
Shorewall Lite on <emphasis>system</emphasis> is restarted via
ssh.</para>
<para>If <emphasis role="bold">-s</emphasis> is specified and the
<emphasis role="bold">restart</emphasis> command succeeds, then the
remote Shorewall-lite configuration is saved by executing <emphasis
role="bold">shorewall-lite save</emphasis> via ssh.</para>
<para>if <emphasis role="bold">-c</emphasis> is included, the
command <emphasis role="bold">shorewall-lite show capabilities -f
&gt; /var/lib/shorewall-lite/capabilities</emphasis> is executed via
ssh then the generated file is copied to
<emphasis>directory</emphasis> using scp. This step is performed
before the configuration is compiled.</para>
<para>If <option>-r</option> is included, it specifies that the root
user on <replaceable>system</replaceable> is named
<replaceable>root-user-name</replaceable> rather than "root".</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">remote-restart
</emphasis>[-<option>s</option>] [-<option>c</option>]
[-<option>r</option> <replaceable>root-user-name</replaceable>]
[-<option>T</option>] [-<option>i</option>] [
<replaceable>directory</replaceable> ]
<replaceable>system</replaceable></term>
<listitem>
<para>This command was renamed from <command>reload</command> in
Shorewall 5.0.0.</para>
<para>If <emphasis>directory</emphasis> is omitted, the current
working directory is assumed. Allows a non-root user to compile a
shorewall script and install it on a system (provided that the user
has root access to the system via ssh). The command is equivalent
to:</para>
<programlisting> <emphasis role="bold">/sbin/shorewall compile -e</emphasis> <emphasis>directory</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall &amp;&amp;\</emphasis>
<emphasis role="bold">scp</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall</emphasis> <emphasis>directory</emphasis><emphasis
role="bold">/firewall.conf</emphasis> <emphasis role="bold">root@</emphasis><emphasis>system</emphasis><emphasis
role="bold">:/var/lib/shorewall-lite/ &amp;&amp;\</emphasis>
<emphasis role="bold">ssh root@</emphasis><emphasis>system</emphasis> <emphasis
role="bold">'/sbin/shorewall-lite restart'</emphasis></programlisting>
<para>In other words, the configuration in the specified (or
defaulted) directory is compiled to a file called firewall in that
directory. If compilation succeeds, then firewall is copied to
<emphasis>system</emphasis> using scp. If the copy succeeds,
Shorewall Lite on <emphasis>system</emphasis> is restarted via
ssh.</para>
<para>If <emphasis role="bold">-s</emphasis> is specified and the
<emphasis role="bold">restart</emphasis> command succeeds, then the
remote Shorewall-lite configuration is saved by executing <emphasis
role="bold">shorewall-lite save</emphasis> via ssh.</para>
<para>if <emphasis role="bold">-c</emphasis> is included, the
command <emphasis role="bold">shorewall-lite show capabilities -f
&gt; /var/lib/shorewall-lite/capabilities</emphasis> is executed via
ssh then the generated file is copied to
<emphasis>directory</emphasis> using scp. This step is performed
before the configuration is compiled.</para>
<para>If <option>-r</option> is included, it specifies that the root
user on <replaceable>system</replaceable> is named
<replaceable>root-user-name</replaceable> rather than "root".</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">reset [<replaceable>chain</replaceable>,
...]</emphasis><acronym/></term>
<listitem>
<para>Resets the packet and byte counters in the specified
<replaceable>chain</replaceable>(s). If no
<replaceable>chain</replaceable> is specified, all the packet and
byte counters in the firewall are reset.</para>
<para>Beginning with Shorewall 5.0.0,
<replaceable>chain</replaceable> may be composed of both a table
name and a chain name separated by a colon (e.g.,
mangle:PREROUTING). Chain names following that don't include a table
name are assumed to be in that same table. If no table name is given
in the command, the filter table is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">restart </emphasis>[-<option>n</option>]
[-<option>p</option>] [-<option>d</option>] [-<option>f</option>]
[-<option>c</option>] [-<option>T</option>] [-<option>i</option>]
[-<option>C</option>] [ <replaceable>directory</replaceable> ]</term>
<listitem>
<para>Beginning with Shorewall 5.0.0, this command performs a true
restart. The firewall is completely stopped as if a
<command>stop</command> command had been issued then it is started
again.</para>
<para>If a <emphasis>directory</emphasis> is included in the
command, Shorewall will look in that <emphasis>directory</emphasis>
first for configuration files.</para>
<para>The <option>-n</option> option causes Shorewall to avoid
updating the routing table(s).</para>
<para>The <option>-p</option> option causes the connection tracking
table to be flushed; the <command>conntrack</command> utility must
be installed to use this option.</para>
<para>The <option>-d</option> option causes the compiler to run
under the Perl debugger.</para>
<para>The <option>-f</option> option suppresses the compilation step
and simply reused the compiled script which last started/restarted
Shorewall, provided that /etc/shorewall and its contents have not
been modified since the last start/restart.</para>
<para>The <option>-c</option> option was added in Shorewall 4.4.20
and performs the compilation step unconditionally, overriding the
AUTOMAKE setting in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). When
both <option>-f</option> and <option>-c</option> are present, the
result is determined by the option that appears last.</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
<para>The <option>-C</option> option was added in Shorewall 4.6.5
and is only meaningful when AUTOMAKE=Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). If an
existing firewall script is used and if that script was the one that
generated the current running configuration, then the running
netfilter configuration will be reloaded as is so as to preserve the
iptables packet and byte counters.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">restore </emphasis> [-<option>n</option>]
[-<option>p</option>] [-<option>C</option>] [
<replaceable>filename</replaceable> ]</term>
<listitem>
<para>Restore Shorewall to a state saved using the <emphasis
role="bold">shorewall save</emphasis> command. Existing connections
are maintained. The <emphasis>filename</emphasis> names a restore
file in /var/lib/shorewall created using <emphasis
role="bold">shorewall save</emphasis>; if no
<emphasis>filename</emphasis> is given then Shorewall will be
restored from the file specified by the RESTOREFILE option in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
<caution>
<para>If your iptables ruleset depends on variables that are
detected at run-time, either in your params file or by
Shorewall-generated code, <command>restore</command> will use the
values that were current when the ruleset was saved, which may be
different from the current values.</para>
</caution>
<para>The <option>-n</option> option causes Shorewall to avoid
updating the routing table(s).</para>
<para>The <option>-p</option> option, added in Shorewall 4.6.5,
causes the connection tracking table to be flushed; the
<command>conntrack</command> utility must be installed to use this
option.</para>
<para>The <option>-C</option> option was added in Shorewall 4.6.5.
If the <option>-C</option> option was specified during <emphasis
role="bold">shorewall save</emphasis>, then the counters saved by
that operation will be restored.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">run
</emphasis><replaceable>command</replaceable> [
<replaceable>parameter</replaceable> ... ]</term>
<listitem>
<para>Added in Shorewall 4.6.3. Executes
<replaceable>command</replaceable> in the context of the generated
script passing the supplied <replaceable>parameter</replaceable>s.
Normally, the <replaceable>command</replaceable> will be a function
declared in <filename>lib.private</filename>.</para>
<para>Before executing the <replaceable>command</replaceable>, the
script will detect the configuration, setting all SW_* variables and
will run your <filename>init</filename> extension script with
$COMMAND = 'run'.</para>
<para>If there are files in the CONFIG_PATH that were modified after
the current firewall script was generated, the following warning
message is issued:</para>
<simplelist>
<member>WARNING: /var/lib/shorewall/firewall is not up to
date</member>
</simplelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">safe-reload
</emphasis>[-<option>d</option>] [-<option>p</option>] [-<option>t
</option><replaceable>timeout</replaceable> ] [
<replaceable>directory</replaceable> ]</term>
<listitem>
<para>Added in Shorewall 5.0.0, this command performs the same
function as did <command>safe_restart</command> in earlier
releases.</para>
<para>Only allowed if Shorewall is running. The current
configuration is saved in /var/lib/shorewall/safe-reload (see the
save command below) then a <emphasis role="bold">shorewall
reload</emphasis> is done. You will then be prompted asking if you
want to accept the new configuration or not. If you answer "n" or if
you fail to answer within 60 seconds (such as when your new
configuration has disabled communication with your terminal), the
configuration is restored from the saved configuration. If a
directory is given, then Shorewall will look in that directory first
when opening configuration files.</para>
<para>Beginning with Shorewall 4.5.0, you may specify a different
<replaceable>timeout</replaceable> value using the
<option>-t</option> option. The numeric
<replaceable>timeout</replaceable> may optionally be followed by an
<option>s</option>, <option>m</option> or <option>h</option> suffix
(e.g., 5m) to specify seconds, minutes or hours respectively. If the
suffix is omitted, seconds is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">safe-restart
</emphasis>[-<option>d</option>] [-<option>p</option>] [-<option>t
</option><replaceable>timeout</replaceable> ] [
<replaceable>directory</replaceable> ]</term>
<listitem>
<para>Only allowed if Shorewall is running. The current
configuration is saved in /var/lib/shorewall/safe-restart (see the
save command below) then a <emphasis role="bold">shorewall
restart</emphasis> is done. You will then be prompted asking if you
want to accept the new configuration or not. If you answer "n" or if
you fail to answer within 60 seconds (such as when your new
configuration has disabled communication with your terminal), the
configuration is restored from the saved configuration. If a
directory is given, then Shorewall will look in that directory first
when opening configuration files.</para>
<para>Beginning with Shorewall 4.5.0, you may specify a different
<replaceable>timeout</replaceable> value using the
<option>-t</option> option. The numeric
<replaceable>timeout</replaceable> may optionally be followed by an
<option>s</option>, <option>m</option> or <option>h</option> suffix
(e.g., 5m) to specify seconds, minutes or hours respectively. If the
suffix is omitted, seconds is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">safe-start</emphasis><emphasis
role="bold"> </emphasis>[-<option>d</option>] [-<option>p</option>]
[-<option>t</option><replaceable>timeout</replaceable> ] [
<replaceable>directory</replaceable> ]</term>
<listitem>
<para>Shorewall is started normally. You will then be prompted
asking if everything went all right. If you answer "n" or if you
fail to answer within 60 seconds (such as when your new
configuration has disabled communication with your terminal), a
shorewall clear is performed for you. If a directory is given, then
Shorewall will look in that directory first when opening
configuration files.</para>
<para>Beginning with Shorewall 4.5.0, you may specify a different
<replaceable>timeout</replaceable> value using the
<option>-t</option> option. The numeric
<replaceable>timeout</replaceable> may optionally be followed by an
<option>s</option>, <option>m</option> or <option>h</option> suffix
(e.g., 5m) to specify seconds, minutes or hours respectively. If the
suffix is omitted, seconds is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">save </emphasis> [-<option>C</option>] [
<replaceable>filename</replaceable> ]</term>
<listitem>
<para>The dynamic blacklist is stored in /var/lib/shorewall/save.
The state of the firewall is stored in
/var/lib/shorewall/<emphasis>filename</emphasis> for use by the
<emphasis role="bold">shorewall restore</emphasis> and <emphasis
role="bold">shorewall -f start</emphasis> commands. If
<emphasis>filename</emphasis> is not given then the state is saved
in the file specified by the RESTOREFILE option in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
<para>The <option>-C</option> option, added in Shorewall 4.6.5,
causes the iptables packet and byte counters to be saved along with
the chains and rules.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">savesets</emphasis></term>
<listitem>
<para>Added in shorewall 4.6.8. Performs the same action as the
<command>stop</command> command with respect to saving ipsets (see
the SAVE_IPSETS option in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)).
This command may be used to proactively save your ipset contents in
the event that a system failure occurs prior to issuing a
<command>stop</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">show</emphasis></term>
<listitem>
<para>The show command can have a number of different
arguments:</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">actions</emphasis></term>
<listitem>
<para>Produces a report about the available actions (built-in,
standard and user-defined).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">bl|blacklists</emphasis>
[-<option>x</option>]</term>
<listitem>
<para>Added in Shorewall 4.6.2. Displays the dynamic chain
along with any chains produced by entries in
shorewall-blrules(5). The <emphasis role="bold">-x</emphasis>
option is passed directly through to iptables and causes
actual packet and byte counts to be displayed. Without this
option, those counts are abbreviated.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>f</option>] <emphasis
role="bold">capabilities</emphasis></term>
<listitem>
<para>Displays your kernel/iptables capabilities. The
<emphasis role="bold">-f</emphasis> option causes the display
to be formatted as a capabilities file for use with <emphasis
role="bold">compile -e</emphasis>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>b</option>] [-<option>x</option>]
[-<option>l</option>] [-<option>t</option>
{<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw</option>|<option>rawpost</option>}]
[ <emphasis>chain</emphasis>... ]</term>
<listitem>
<para>The rules in each <emphasis>chain</emphasis> are
displayed using the <emphasis role="bold">iptables
-L</emphasis> <emphasis>chain</emphasis> <emphasis
role="bold">-n -v</emphasis> command. If no
<emphasis>chain</emphasis> is given, all of the chains in the
filter table are displayed. The <emphasis
role="bold">-x</emphasis> option is passed directly through to
iptables and causes actual packet and byte counts to be
displayed. Without this option, those counts are abbreviated.
The <emphasis role="bold">-t</emphasis> option specifies the
Netfilter table to display. The default is <emphasis
role="bold">filter</emphasis>.</para>
<para>The <emphasis role="bold">-b</emphasis> ('brief') option
causes rules which have not been used (i.e. which have zero
packet and byte counts) to be omitted from the output. Chains
with no rules displayed are also omitted from the
output.</para>
<para>The <emphasis role="bold">-l</emphasis> option causes
the rule number for each Netfilter rule to be
displayed.</para>
<para>If the -<emphasis role="bold">t</emphasis> option and
the <option>chain</option> keyword are both omitted and any of
the listed <replaceable>chain</replaceable>s do not exist, a
usage message is displayed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">classifiers|filters</emphasis></term>
<listitem>
<para>Displays information about the packet classifiers
defined on the system as a result of traffic shaping
configuration.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">config</emphasis></term>
<listitem>
<para>Displays distribution-specific defaults.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">connections
[<replaceable>filter_parameter</replaceable>
...]</emphasis></term>
<listitem>
<para>Displays the IP connections currently being tracked by
the firewall.</para>
<para>If the <command>conntrack</command> utility is
installed, beginning with Shorewall 4.6.11 the set of
connections displayed can be limited by including conntrack
filter parameters (-p , -s, --dport, etc). See conntrack(8)
for details.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">event</emphasis><replaceable>
event</replaceable></term>
<listitem>
<para>Added in Shorewall 4.5.19. Displays the named
event.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">events</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.19. Displays all events.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ip</emphasis></term>
<listitem>
<para>Displays the system's IPv4 configuration.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ipa</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.17. Displays the per-IP
accounting counters (<ulink
url="/manpages/shorewall-accounting.html">shorewall-accounting</ulink>
(5)).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>m</option>] <emphasis
role="bold">log</emphasis></term>
<listitem>
<para>Displays the last 20 Shorewall messages from the log
file specified by the LOGFILE option in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).
The <emphasis role="bold">-m</emphasis> option causes the MAC
address of each packet source to be displayed if that
information is available.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">macros</emphasis></term>
<listitem>
<para>Displays information about each macro defined on the
firewall system.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">macro
</emphasis><replaceable>macro</replaceable></term>
<listitem>
<para>Added in Shorewall 4.4.6. Displays the file that
implements the specified <replaceable>macro</replaceable>
(usually
<filename>/usr/share/shorewall/macro</filename>.<replaceable>macro</replaceable>).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>x</option>] <emphasis
role="bold">mangle</emphasis></term>
<listitem>
<para>Displays the Netfilter mangle table using the command
<emphasis role="bold">iptables -t mangle -L -n -v</emphasis>.
The <emphasis role="bold">-x</emphasis> option is passed
directly through to iptables and causes actual packet and byte
counts to be displayed. Without this option, those counts are
abbreviated.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">marks</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.26. Displays the various fields
in packet marks giving the min and max value (in both decimal
and hex) and the applicable mask (in hex).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>x</option>] <emphasis
role="bold">nat</emphasis></term>
<listitem>
<para>Displays the Netfilter nat table using the command
<emphasis role="bold">iptables -t nat -L -n -v</emphasis>. The
<emphasis role="bold">-x</emphasis> option is passed directly
through to iptables and causes actual packet and byte counts
to be displayed. Without this option, those counts are
abbreviated.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">opens</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.8. Displays the iptables rules in
the 'dynamic' chain created through use of the <command>open
</command>command..</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">policies</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.4. Displays the applicable policy
between each pair of zones. Note that implicit intrazone
ACCEPT policies are not displayed for zones associated with a
single network where that network doesn't specify
<option>routeback</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>c</option>]<emphasis role="bold">
routing</emphasis></term>
<listitem>
<para>Displays the system's IPv4 routing configuration.
The<option> -c</option> option causes the route cache to be
displayed along with the other routing information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>[-<option>x</option>] <emphasis
role="bold">raw</emphasis></term>
<listitem>
<para>Displays the Netfilter raw table using the command
<emphasis role="bold">iptables -t raw -L -n -v</emphasis>. The
<emphasis role="bold">-x</emphasis> option is passed directly
through to iptables and causes actual packet and byte counts
to be displayed. Without this option, those counts are
abbreviated.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">tc</emphasis></term>
<listitem>
<para>Displays information about queuing disciplines, classes
and filters.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">zones</emphasis></term>
<listitem>
<para>Displays the current composition of the Shorewall zones
on the system.</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">start </emphasis><emphasis role="bold">
</emphasis>[-<option>n</option>] [-<option>p</option>]
[-<option>d</option>] [-<option>f</option>] [-<option>c</option>]
[-<option>T</option>] [-<option>i</option>] [-<option>C</option>] [
<replaceable>directory</replaceable> ]</term>
<listitem>
<para>Start shorewall. Existing connections through shorewall
managed interfaces are untouched. New connections will be allowed
only if they are allowed by the firewall rules or policies. If a
<replaceable>directory</replaceable> is included in the command,
Shorewall will look in that <emphasis>directory</emphasis> first for
configuration files. If <emphasis role="bold">-f</emphasis> is
specified, the saved configuration specified by the RESTOREFILE
option in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5) will
be restored if that saved configuration exists and has been modified
more recently than the files in /etc/shorewall. When <emphasis
role="bold">-f</emphasis> is given, a
<replaceable>directory</replaceable> may not be specified.</para>
<para>Update: In Shorewall 4.4.20, a new LEGACY_FASTSTART option was
added to <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). When
LEGACY_FASTSTART=No, the modification times of files in
/etc/shorewall are compared with that of /var/lib/shorewall/firewall
(the compiled script that last started/restarted the
firewall).</para>
<para>The <option>-n</option> option causes Shorewall to avoid
updating the routing table(s).</para>
<para>The <option>-p</option> option causes the connection tracking
table to be flushed; the <command>conntrack</command> utility must
be installed to use this option.</para>
<para>The <option>-c</option> option was added in Shorewall 4.4.20
and performs the compilation step unconditionally, overriding the
AUTOMAKE setting in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5). When
both <option>-f</option> and <option>-c</option>are present, the
result is determined by the option that appears last.</para>
<para>The <option>-T</option> option was added in Shorewall 4.5.3
and causes a Perl stack trace to be included with each
compiler-generated error and warning message.</para>
<para>The -i option was added in Shorewall 4.6.0 and causes a
warning message to be issued if the current line contains
alternative input specifications following a semicolon (";"). Such
lines will be handled incorrectly if INLINE_MATCHES is set to Yes in
<ulink
url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
<para>The <option>-C</option> option was added in Shorewall 4.6.5
and is only meaningful when the <option>-f</option> option is also
specified. If the previously-saved configuration is restored, and if
the <option>-C</option> option was also specified in the <emphasis
role="bold">save</emphasis> command, then the packet and byte
counters will be restored.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">stop</emphasis>
[-<option>f</option>]</term>
<listitem>
<para>Stops the firewall. All existing connections, except those
listed in <ulink
url="/manpages/shorewall-routestopped.html">shorewall-routestopped</ulink>(5)
or permitted by the ADMINISABSENTMINDED option in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5), are
taken down. The only new traffic permitted through the firewall is
from systems listed in <ulink
url="/manpages/shorewall-routestopped.html">shorewall-routestopped</ulink>(5)
or by ADMINISABSENTMINDED.</para>
<para>If <option>-f</option> is given, the command will be processed
by the compiled script that executed the last successful <emphasis
role="bold">start</emphasis>, <emphasis
role="bold">restart</emphasis> or <emphasis
role="bold">refresh</emphasis> command if that script exists.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">status</emphasis>
[-<option>i</option>]</term>
<listitem>
<para>Produces a short report about the state of the
Shorewall-configured firewall.</para>
<para>The <option>-i </option>option was added in Shorewall 4.6.2
and causes the status of each optional or provider interface to be
displayed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">try</emphasis>
<replaceable>directory</replaceable> [
<replaceable>timeout</replaceable> ]</term>
<listitem>
<para>If Shorewall is started then the firewall state is saved to a
temporary saved configuration
(<filename>/var/lib/shorewall/.try</filename>). Next, if Shorewall
is currently started then a <emphasis role="bold">restart</emphasis>
command is issued using the specified configuration
<replaceable>directory</replaceable>; otherwise, a <emphasis
role="bold">start</emphasis> command is performed using the
specified configuration <replaceable>directory</replaceable>. if an
error occurs during the compilation phase of the <emphasis
role="bold">restart</emphasis> or <emphasis
role="bold">start</emphasis>, the command terminates without
changing the Shorewall state. If an error occurs during the
<emphasis role="bold">restart</emphasis> phase, then a <emphasis
role="bold">shorewall restore</emphasis> is performed using the
saved configuration. If an error occurs during the <emphasis
role="bold">start</emphasis> phase, then Shorewall is cleared. If
the <emphasis role="bold">start</emphasis>/<emphasis
role="bold">restart</emphasis> succeeds and a
<replaceable>timeout</replaceable> is specified then a <emphasis
role="bold">clear</emphasis> or <emphasis
role="bold">restore</emphasis> is performed after
<replaceable>timeout</replaceable> seconds.</para>
<para>Beginning with Shorewall 4.5.0, the numeric
<replaceable>timeout</replaceable> may optionally be followed by an
<option>s</option>, <option>m</option> or <option>h</option> suffix
(e.g., 5m) to specify seconds, minutes or hours respectively. If the
suffix is omitted, seconds is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">update </emphasis> [-<option>d</option>]
[-<option>r</option>] [-<option>T</option>] [-<option>a</option>]
[-<option>i</option>] [-<option>A</option>] [
<replaceable>directory</replaceable> ]</term>
<listitem>
<para>Added in Shorewall 4.4.21 and causes the compiler to update
<filename>/etc/shorewall/shorewall.conf then validate the
configuration</filename>. The update will add options not present in
the old file with their default values, and will move deprecated
options with non-defaults to a deprecated options section at the
bottom of the file. Your existing
<filename>shorewall.conf</filename> file is renamed
<filename>shorewall.conf.bak.</filename></para>
<para><filename>The command was extended over the years with a set
of options that caused additional configuration
updates.</filename></para>
<itemizedlist>
<listitem>
<para>Convert an existing <filename>blacklist</filename> file
into an equivalent <filename>blrules</filename> file.</para>
</listitem>
<listitem>
<para>Convert an existing <filename>routestopped</filename> file
into an equivalent <filename>stoppedrules</filename>
file.</para>
</listitem>
<listitem>
<para>Convert existing <filename>tcrules</filename> and
<filename>tos</filename> files into an equivalent mangle
file.</para>
</listitem>
<listitem>
<para>Convert an existing <filename>notrack</filename> file into
an equivalent <filename>conntrack</filename> file.</para>
</listitem>
<listitem>
<para>Convert FORMAT, SECTION and COMMENT entries into ?FORMAT,
?SECTION and ?COMMENT directives.</para>
</listitem>
</itemizedlist>
<para>In each case, the old file is renamed with a .bak
suffix.</para>
<para>In Shorewall 5.0.0, the options were eliminated and the
<command>update</command> command performs all of the updates
described above.</para>
<important>
<para>There are some notable restrictions with the
<command>update</command> command:</para>
<orderedlist>
<listitem>
<para>Converted rules will be appended to the existing file;
if there is no existing file in the CONFIG_PATH, one will be
created in the directory specified in the command or in the
first entry in the CONFIG_PATH (normally <filename
class="directory">/etc/shorewall</filename>) otherwise.</para>
</listitem>
<listitem>
<para>Existing comments in the file being converted will not
be transferred to the output file.</para>
</listitem>
<listitem>
<para>INCLUDEd files will be expanded inline in the output
file.</para>
</listitem>
<listitem>
<para>Columns in the output file will be separated by a single
tab character; there is no attempt made to otherwise align the
columns.</para>
</listitem>
</orderedlist>
</important>
<para>The <option>-a</option> option causes the updated
<filename>shorewall.conf</filename> file to be annotated with
documentation.</para>
<para>The <option>-i</option> option was added in Shorewall 4.6.0
and causes a warning message to be issued if the current line
contains alternative input specifications following a semicolon
(";"). Such lines will be handled incorrectly if INLINE_MATCHES is
set to Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
<para>The <option>-A</option> option is included for compatibility
with Shorewall 4.6 and is equivalent to specifying the
<option>-i</option> option.</para>
<para>For a description of the other options, see the <emphasis
role="bold">check</emphasis> command above.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">version</emphasis>
[-<option>a</option>]</term>
<listitem>
<para>Displays Shorewall's version. The <option>-a</option> option
is included for compatibility with earlier Shorewall releases and is
ignored.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>EXIT STATUS</title>
<para>In general, when a command succeeds, status 0 is returned; when the
command fails, a non-zero status is returned.</para>
<para>The <command>status</command> command returns exit status as
follows:</para>
<para>0 - Firewall is started.</para>
<para>3 - Firewall is stopped or cleared</para>
<para>4 - Unknown state; usually means that the firewall has never been
started.</para>
</refsect1>
<refsect1>
<title>ENVIRONMENT</title>
<para>Two environmental variables are recognized by Shorewall:</para>
<variablelist>
<varlistentry>
<term>SHOREWALL_INIT_SCRIPT</term>
<listitem>
<para>When set to 1, causes Std out to be redirected to the file
specified in the STARTUP_LOG option in <ulink
url="shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>SW_LOGGERTAG</term>
<listitem>
<para>Added in Shorewall 5.0.8. When set to a non-empty value, that
value is passed to the logger utility in its -t (--tag)
option.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall/</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
<para>shorewall-accounting(5), shorewall-actions(5),
shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
shorewall-tunnels(5), shorewall-zones(5)</para>
</refsect1>
</refentry>
Reference in New Issue View Git Blame Copy Permalink