1
0
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-21 13:50:59 +01:00
shorewall_code/Shorewall-docsN/configuration_file_basics.xml
teastep 9fd5780f36 Initial revision
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@1439 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2004-07-03 15:51:55 +00:00

472 lines
20 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
<!--$Id$-->
<articleinfo>
<title>Configuration Files</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate>2004-04-20</pubdate>
<copyright>
<year>2001-2004</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
</legalnotice>
</articleinfo>
<caution>
<para>If you copy or edit your configuration files on a system running
Microsoft Windows, you must run them through <ulink
url="http://www.megaloman.com/~hany/software/hd2u/">dos2unix</ulink>
before you use them with Shorewall.</para>
</caution>
<section id="Files">
<title>Files</title>
<para><itemizedlist><listitem><para><filename>/etc/shorewall/shorewall.conf</filename>
- used to set several firewall parameters.</para></listitem><listitem><para><filename>/etc/shorewall/params</filename>
- use this file to set shell variables that you will expand in other
files.</para></listitem><listitem><para><filename>/etc/shorewall/zones</filename>
- partition the firewall&#39;s view of the world into zones.</para></listitem><listitem><para><filename>/etc/shorewall/policy</filename>
- establishes firewall high-level policy.</para></listitem><listitem><para><filename>/etc/shorewall/interfaces</filename>
- describes the interfaces on the firewall system.</para></listitem><listitem><para><filename>/etc/shorewall/hosts</filename>
- allows defining zones in terms of individual hosts and subnetworks.</para></listitem><listitem><para><filename>/etc/shorewall/masq</filename>
- directs the firewall where to use many-to-one (dynamic) Network Address
Translation (a.k.a. Masquerading) and Source Network Address Translation
(SNAT).</para></listitem><listitem><para><filename>/etc/shorewall/modules</filename>
- directs the firewall to load kernel modules.</para></listitem><listitem><para><filename>/etc/shorewall/rules</filename>
- defines rules that are exceptions to the overall policies established in
/etc/shorewall/policy.</para></listitem><listitem><para><filename>/etc/shorewall/nat</filename>
- defines one-to-one NAT rules.</para></listitem><listitem><para><filename>/etc/shorewall/proxyarp</filename>
- defines use of Proxy ARP.</para></listitem><listitem><para><filename>/etc/shorewall/routestopped</filename>
(Shorewall 1.3.4 and later) - defines hosts accessible when Shorewall is
stopped.</para></listitem><listitem><para><filename>/etc/shorewall/tcrules
</filename>- defines marking of packets for later use by traffic
control/shaping or policy routing.</para></listitem><listitem><para><filename>/etc/shorewall/tos</filename>
- defines rules for setting the TOS field in packet headers.</para></listitem><listitem><para><filename>/etc/shorewall/tunnels</filename>
- defines IPSEC, GRE and IPIP tunnels with end-points on the firewall
system.</para></listitem><listitem><para><filename>/etc/shorewall/blacklist</filename>
- lists blacklisted IP/subnet/MAC addresses.</para></listitem><listitem><para><filename>/etc/shorewall/init</filename>
- commands that you wish to execute at the beginning of a <quote>shorewall
start</quote> or <quote>shorewall restart</quote>.</para></listitem><listitem><para><filename>/etc/shorewall/start</filename>
- commands that you wish to execute at the completion of a <quote>shorewall
start</quote> or <quote>shorewall restart</quote></para></listitem><listitem><para><filename>/etc/shorewall/stop
</filename>- commands that you wish to execute at the beginning of a
<quote>shorewall stop</quote>.</para></listitem><listitem><para><filename>/etc/shorewall/stopped</filename>
- commands that you wish to execute at the completion of a <quote>shorewall
stop</quote>.</para></listitem><listitem><para><filename>/etc/shorewall/ecn</filename>
- disable Explicit Congestion Notification (ECN - RFC 3168) to remote
hosts or networks.</para></listitem><listitem><para><filename>/etc/shorewall/accounting</filename>
- define IP traffic accounting rules</para></listitem><listitem><para><filename>/etc/shorewall/actions</filename>
and <filename>/usr/share/shorewall/action.template</filename> - define
your own actions for rules in /etc/shorewall/rules (shorewall 1.4.9 and
later).</para></listitem><listitem><para><filename>/usr/share/shorewall/actions.std</filename>
- Actions defined by Shorewall.</para></listitem><listitem><para><filename>/usr/share/shorewall/actions.*</filename>
- Details of actions defined by Shorewall.</para></listitem><listitem><para><filename>/usr/share/rfc1918</filename>
— Defines the behavior of the &#39;norfc1918&#39; interface option in
<filename>/etc/shorewall/interfaces</filename>. <emphasis role="bold">If
you need to change this file, copy it to <filename>/etc/shorewall</filename>
and modify the copy</emphasis>.</para></listitem><listitem><para><filename>/usr/share/bogons</filename>
— Defines the behavior of the &#39;nobogons&#39; interface option in
<filename>/etc/shorewall/interfaces</filename>. <emphasis role="bold">If
you need to change this file, copy it to <filename>/etc/shorewall</filename>
and modify the copy</emphasis>.</para></listitem></itemizedlist></para>
</section>
<section>
<title>Special Note about /etc/shorewall/shorewall.conf</title>
<para>It is a good idea to modify your /etc/shorewall/shorewall.conf file,
even if you just add a comment that says &#34;I modified this file&#34;.
That way, your package manager won&#39;t overwrite the file with future
updated versions. Such overwrites can cause unwanted changes in the
behavior of Shorewall.</para>
</section>
<section id="Comments">
<title>Comments</title>
<para>You may place comments in configuration files by making the first
non-whitespace character a pound sign (<quote>#</quote>). You may also
place comments at the end of any line, again by delimiting the comment
from the rest of the line with a pound sign.</para>
<example>
<title>Comments in a Configuration File</title>
<programlisting># This is a comment
ACCEPT net fw tcp www #This is an end-of-line comment</programlisting>
</example>
</section>
<section id="Continuation">
<title>Line Continuation</title>
<para>You may continue lines in the configuration files using the usual
backslash (<quote>\</quote>) followed immediately by a new line character.</para>
<example>
<title>Line Continuation</title>
<programlisting>ACCEPT net fw tcp \
smtp,www,pop3,imap #Services running on the firewall</programlisting>
</example>
</section>
<section id="INCLUDE">
<title>INCLUDE Directive</title>
<para>Beginning with Shorewall version 1.4.2, any file may contain INCLUDE
directives. An INCLUDE directive consists of the word INCLUDE followed by
a path name and causes the contents of the named file to be logically
included into the file containing the INCLUDE. Relative path names given
in an INCLUDE directive are assumed to reside in /etc/shorewall or in an
alternate configuration directory if one has been specified for the
command.</para>
<para>INCLUDE&#39;s may be nested to a level of 3 -- further nested
INCLUDE directives are ignored with a warning message.</para>
<example>
<title>Use of INCLUDE</title>
<programlisting> shorewall/params.mgmt:
&#x00A0;&#x00A0; MGMT_SERVERS=1.1.1.1,2.2.2.2,3.3.3.3
&#x00A0;&#x00A0; TIME_SERVERS=4.4.4.4
&#x00A0;&#x00A0; BACKUP_SERVERS=5.5.5.5
&#x00A0;&#x00A0; ----- end params.mgmt -----
&#x00A0;&#x00A0; shorewall/params:
&#x00A0;&#x00A0; # Shorewall 1.3 /etc/shorewall/params
&#x00A0;&#x00A0; [..]
&#x00A0;&#x00A0; #######################################
&#x00A0;
&#x00A0;&#x00A0; INCLUDE params.mgmt&#x00A0;&#x00A0;&#x00A0;
&#x00A0;
&#x00A0;&#x00A0; # params unique to this host here
&#x00A0;&#x00A0; #LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE
&#x00A0;&#x00A0; ----- end params -----
&#x00A0;&#x00A0; shorewall/rules.mgmt:
&#x00A0;&#x00A0; ACCEPT net:$MGMT_SERVERS&#x00A0;&#x00A0;&#x00A0;$FW&#x00A0;&#x00A0;&#x00A0; tcp&#x00A0;&#x00A0;&#x00A0; 22
&#x00A0;&#x00A0; ACCEPT $FW&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0; net:$TIME_SERVERS&#x00A0;&#x00A0;&#x00A0; udp&#x00A0;&#x00A0;&#x00A0; 123
&#x00A0;&#x00A0; ACCEPT $FW&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0; net:$BACKUP_SERVERS&#x00A0; tcp&#x00A0;&#x00A0;&#x00A0; 22
&#x00A0;&#x00A0; ----- end rules.mgmt -----
&#x00A0;&#x00A0; shorewall/rules:
&#x00A0;&#x00A0; # Shorewall version 1.3 - Rules File
&#x00A0;&#x00A0; [..]
&#x00A0;&#x00A0; #######################################
&#x00A0;
&#x00A0;&#x00A0; INCLUDE rules.mgmt&#x00A0;&#x00A0;&#x00A0;&#x00A0;
&#x00A0;
&#x00A0;&#x00A0; # rules unique to this host here
&#x00A0;&#x00A0; #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
&#x00A0;&#x00A0; ----- end rules -----</programlisting>
</example>
</section>
<section id="dnsnames">
<title>Using DNS Names</title>
<caution>
<para>I personally recommend strongly against using DNS names in
Shorewall configuration files. If you use DNS names and you are called
out of bed at 2:00AM because Shorewall won&#39;t start as a result of
DNS problems then don&#39;t say that you were not forewarned.</para>
</caution>
<para>Beginning with Shorewall 1.3.9, Host addresses in Shorewall
configuration files may be specified as either IP addresses or DNS Names.</para>
<para>DNS names in iptables rules aren&#39;t nearly as useful as they
first appear. When a DNS name appears in a rule, the iptables utility
resolves the name to one or more IP addresses and inserts those addresses
into the rule. So changes in the DNS-&#62;IP address relationship that
occur after the firewall has started have absolutely no effect on the
firewall&#39;s ruleset.</para>
<para>If your firewall rules include DNS names then:</para>
<itemizedlist>
<listitem>
<para>If your <filename>/etc/resolv.conf </filename>is wrong then your
firewall won&#39;t start.</para>
</listitem>
<listitem>
<para>If your <filename>/etc/nsswitch.conf</filename> is wrong then
your firewall won&#39;t start.</para>
</listitem>
<listitem>
<para>If your Name Server(s) is(are) down then your firewall won&#39;t
start.</para>
</listitem>
<listitem>
<para>If your startup scripts try to start your firewall before
starting your DNS server then your firewall won&#39;t start.</para>
</listitem>
<listitem>
<para>Factors totally outside your control (your ISP&#39;s router is
down for example), can prevent your firewall from starting.</para>
</listitem>
<listitem>
<para>You must bring up your network interfaces prior to starting your
firewall.</para>
</listitem>
</itemizedlist>
<para>Each DNS name much be fully qualified and include a minumum of two
periods (although one may be trailing). This restriction is imposed by
Shorewall to insure backward compatibility with existing configuration
files.</para>
<example>
<title>Valid DNS Names</title>
<itemizedlist>
<listitem>
<para>mail.shorewall.net</para>
</listitem>
<listitem>
<para>shorewall.net. (note the trailing period).</para>
</listitem>
</itemizedlist>
</example>
<example>
<title>Invalid DNS Names</title>
<itemizedlist>
<listitem>
<para>mail (not fully qualified)</para>
</listitem>
<listitem>
<para>shorewall.net (only one period)</para>
</listitem>
</itemizedlist>
</example>
<para>DNS names may not be used as:</para>
<itemizedlist>
<listitem>
<para>The server address in a DNAT rule (/etc/shorewall/rules file)</para>
</listitem>
<listitem>
<para>In the ADDRESS column of an entry in /etc/shorewall/masq.</para>
</listitem>
<listitem>
<para>In the <filename>/etc/shorewall/nat</filename> file.</para>
</listitem>
</itemizedlist>
<para>These restrictions are imposed by Netfilter and not by Shorewall.</para>
</section>
<section id="Compliment">
<title>Complementing an Address or Subnet</title>
<para>Where specifying an IP address, a subnet or an interface, you can
precede the item with <quote>!</quote> to specify the complement of the
item. For example, !192.168.1.4 means <quote>any host but 192.168.1.4</quote>.
There must be no white space following the <quote>!</quote>.</para>
</section>
<section id="Lists">
<title>Comma-separated Lists</title>
<para>Comma-separated lists are allowed in a number of contexts within the
configuration files. A comma separated list:</para>
<itemizedlist>
<listitem>
<para>Must not have any embedded white space.<programlisting> Valid: routefilter,dhcp,norfc1918
Invalid: routefilter,&#x00A0;&#x00A0;&#x00A0;&#x00A0; dhcp,&#x00A0;&#x00A0;&#x00A0;&#x00A0; norfc1818</programlisting></para>
</listitem>
<listitem>
<para>If you use line continuation to break a comma-separated list,
the continuation line(s) must begin in column 1 (or there would be
embedded white space)</para>
</listitem>
<listitem>
<para>Entries in a comma-separated list may appear in any order.</para>
</listitem>
</itemizedlist>
</section>
<section id="Ports">
<title>Port Numbers/Service Names</title>
<para>Unless otherwise specified, when giving a port number you can use
either an integer or a service name from /etc/services.</para>
</section>
<section id="Ranges">
<title>Port Ranges</title>
<para>If you need to specify a range of ports, the proper syntax is
&#60;low port number&#62;:&#60;high port number&#62;. For example, if you
want to forward the range of tcp ports 4000 through 4100 to local host
192.168.1.3, the entry in /etc/shorewall/rules is:</para>
<programlisting>#ACTION SOURCE DESTINATION PROTO DEST PORTS(S)
DNAT net loc:192.168.1.3 tcp 4000:4100</programlisting>
<para>If you omit the low port number, a value of zero is assumed; if you
omit the high port number, a value of 65535 is assumed.</para>
</section>
<section id="Variables">
<title>Using Shell Variables</title>
<para>You may use the /etc/shorewall/params file to set shell variables
that you can then use in some of the other configuration files.</para>
<para>It is suggested that variable names begin with an upper case letter
to distinguish them from variables used internally within the Shorewall
programs</para>
<example>
<title>Using Shell Variables</title>
<programlisting>&#x00A0;&#x00A0;&#x00A0; /etc/shorewall/params
NET_IF=eth0
NET_BCAST=130.252.100.255
NET_OPTIONS=routefilter,norfc1918
&#x00A0;&#x00A0;&#x00A0; /etc/shorewall/interfaces record:
net $NET_IF $NET_BCAST $NET_OPTIONS
&#x00A0;&#x00A0;&#x00A0; The result will be the same as if the record had been written
net eth0 130.252.100.255 routefilter,norfc1918
</programlisting>
<para>Variables may be used anywhere in the other configuration files.</para>
</example>
</section>
<section id="MAC">
<title>Using MAC Addresses</title>
<para>Media Access Control (MAC) addresses can be used to specify packet
source in several of the configuration files. In order to control traffic
to/from a host by its MAC address, the host must be on the same network as
the firewall.</para>
<para>To use this feature, your kernel must have MAC Address Match support
(CONFIG_IP_NF_MATCH_MAC) included.</para>
<para>MAC addresses are 48 bits wide and each Ethernet Controller has a
unique MAC address.</para>
<para>In GNU/Linux, MAC addresses are usually written as a series of 6 hex
numbers separated by colons.</para>
<example>
<title>MAC Address of an Ethernet Controller</title>
<programlisting> &#x00A0;&#x00A0;&#x00A0;&#x00A0; [root@gateway root]# <command>ifconfig eth0</command>
&#x00A0;&#x00A0;&#x00A0;&#x00A0; eth0 Link encap:Ethernet HWaddr <emphasis
role="bold">02:00:08:E3:FA:55</emphasis>
&#x00A0;&#x00A0;&#x00A0;&#x00A0; inet addr:206.124.146.176 Bcast:206.124.146.255 Mask:255.255.255.0
&#x00A0;&#x00A0;&#x00A0;&#x00A0; UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
&#x00A0;&#x00A0;&#x00A0;&#x00A0; RX packets:2398102 errors:0 dropped:0 overruns:0 frame:0
&#x00A0;&#x00A0;&#x00A0;&#x00A0; TX packets:3044698 errors:0 dropped:0 overruns:0 carrier:0
&#x00A0;&#x00A0;&#x00A0;&#x00A0; collisions:30394 txqueuelen:100
&#x00A0;&#x00A0;&#x00A0;&#x00A0; RX bytes:419871805 (400.4 Mb) TX bytes:1659782221 (1582.8 Mb)
&#x00A0;&#x00A0;&#x00A0;&#x00A0; Interrupt:11 Base address:0x1800
</programlisting>
</example>
<para>Because Shorewall uses colons as a separator for address fields,
Shorewall requires MAC addresses to be written in another way. In
Shorewall, MAC addresses begin with a tilde (<quote>~</quote>) and consist
of 6 hex numbers separated by hyphens. In Shorewall, the MAC address in
the example above would be written <emphasis role="bold">~02-00-08-E3-FA-55</emphasis>.</para>
<note>
<para>It is not necessary to use the special Shorewall notation in the
<filename><ulink url="MAC_Validation.html">/etc/shorewall/maclist</ulink></filename>
file.</para>
</note>
</section>
<section id="Levels">
<title>Shorewall Configurations</title>
<para>Shorewall allows you to have configuration directories other than
<filename class="directory">/etc/shorewall</filename>. The shorewall
check, start and restart commands allow you to specify an alternate
configuration directory and Shorewall will use the files in the alternate
directory rather than the corresponding files in /etc/shorewall. The
alternate directory need not contain a complete configuration; those files
not in the alternate directory will be read from <filename
class="directory">/etc/shorewall</filename>.</para>
<para>This facility permits you to easily create a test or temporary
configuration by</para>
<orderedlist>
<listitem>
<para>copying the files that need modification from /etc/shorewall to
a separate directory;</para>
</listitem>
<listitem>
<para>modify those files in the separate directory; and</para>
</listitem>
<listitem>
<para>specifying the separate directory in a shorewall start or
shorewall restart command (e.g., <command>shorewall -c /etc/testconfig
restart</command> )</para>
</listitem>
</orderedlist>
<para>The <ulink url="starting_and_stopping_shorewall.htm">try command</ulink>
allows you to attempt to restart using an alternate configuration and if
an error occurs to automatically restart the standard configuration.</para>
</section>
</article>