extern/shorewall_code
1
0
Fork 1
mirror of https://gitlab.com/shorewall/code.git synced 2024-11-27 10:03:41 +01:00
Code Issues Packages Projects Releases Wiki Activity
f029f5b483
shorewall_code/docs/Shorewall_Squid_Usage.xml
Tom Eastep 1e6578c759 Correct example in the TPROXY documentaiton. 
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2013-05-17 13:36:09 -07:00

448 lines
19 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article id="Shorewall_Squid_Usage">
<!--$Id$-->
<articleinfo>
<title>Using Shorewall with Squid</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate><?dbtimestamp format="Y/m/d"?></pubdate>
<copyright>
<year>2003-2008</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled <quote>
<ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink>
</quote>.</para>
</legalnotice>
</articleinfo>
<para>This page covers Shorewall configuration to use with <ulink
url="http://www.squid-cache.org">Squid</ulink> running as a Transparent
Proxy or as a Manual Proxy.</para>
<caution>
<para><emphasis role="bold">This article applies to Shorewall 4.0 and
later. If you are running a version of Shorewall earlier than Shorewall
4.0.0 then please see the documentation for that
release.</emphasis></para>
</caution>
<section id="Transparent">
<title>Squid as a Transparent (Interception) Proxy</title>
<important>
<para>This section gives instructions for transparent proxying of HTTP.
HTTPS (normally TCP port 443) <emphasis role="bold">cannot</emphasis> be
proxied transparently (stop and think about it for a minute; if HTTPS
could be transparently proxied, then how secure would it be?).</para>
</important>
<caution>
<para>Please observe the following general requirements:</para>
<itemizedlist>
<listitem>
<para>In all cases, Squid should be configured to run as a
transparent proxy as described at <ulink
url="http://wiki.squid-cache.org/SquidFaq/InterceptionProxy">http://wiki.squid-cache.org/SquidFaq/InterceptionProxy</ulink>.</para>
<para>The bottom line of that article is that if you are running
<emphasis role="bold">Squid 2.6 or later</emphasis>, then you simply
need to add the word <firstterm>transparent</firstterm> to your
http_port specification:</para>
<programlisting>http_port 3128 transparent</programlisting>
<para>In <emphasis role="bold">earlier Squid versions</emphasis>,
you need to set several options:</para>
<programlisting>http_port 3128
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on</programlisting>
</listitem>
<listitem>
<para>Depending on your distribution, other Squid configuration
changes may be required. These changes typically consist of:</para>
<orderedlist>
<listitem>
<para>Adding an ACL that represents the clients on your local
network.</para>
<para>Example:</para>
<programlisting>ACL my_networks src 192.168.1.0/24 192.168.2.0/24</programlisting>
</listitem>
<listitem>
<para>Allowing HTTP access to that ACL.</para>
<para>Example:</para>
<programlisting>http_access allow my_networks</programlisting>
</listitem>
</orderedlist>
<para>See your distribution's Squid documentation and <ulink
url="http://www.squid-cache.org/">http://www.squid-cache.org/</ulink>
for details.</para>
<para>It is a good idea to get Squid working as a <link
linkend="Manual">manual proxy</link> first before you try
transparent proxying.</para>
</listitem>
<listitem>
<para>The following instructions mention the file
/etc/shorewall/start - if you don't have that file, simply create
it.</para>
</listitem>
<listitem>
<para>When the Squid server is in the local zone, that zone must be
defined ONLY by its interface -- no /etc/shorewall/hosts file
entries. That is because the packets being routed to the Squid
server still have their original destination IP addresses.</para>
</listitem>
<listitem>
<para>You must have iptables installed on your Squid server.</para>
</listitem>
</itemizedlist>
</caution>
<caution>
<para>In the instructions below, only TCP Port 80 is opened from the
system running Squid to the Internet. If your users require browsing
sites that use a port other than 80 (e.g.,
http://www.domain.tld:<emphasis role="bold">8080</emphasis>) then you
must open those ports as well.</para>
</caution>
<section id="Configurations">
<title>Configurations</title>
<para>Three different configurations are covered:</para>
<simplelist>
<member>Squid (transparent) Running on the Firewall</member>
<member>Squid (transparent) Running in the local Network</member>
<member>Squid (transparent) Running in a DMZ</member>
</simplelist>
<section id="Firewall">
<title>Squid (transparent) Running on the Firewall</title>
<para>You want to redirect all local www connection requests EXCEPT
those to your own http server (206.124.146.177) to a Squid transparent
proxy running on the firewall and listening on port 3128. Squid will
of course require access to remote web servers.</para>
<para>In <filename>/etc/shorewall/rules</filename>:</para>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
# PORT(S) DEST
ACCEPT $FW net tcp www
REDIRECT loc 3128 tcp www - !206.124.146.177
</programlisting>
<para>There may be a requirement to exclude additional destination
hosts or networks from being redirected. For example, you might also
want requests destined for 130.252.100.0/24 to not be routed to
Squid.</para>
<para>If needed, you may just add the additional hosts/networks to the
ORIGINAL DEST column in your REDIRECT rule.</para>
<para><filename>/etc/shorewall/rules</filename>:<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
# PORT(S) DEST
REDIRECT loc 3128 tcp www - !206.124.146.177,130.252.100.0/24</programlisting></para>
<para>People frequently ask <emphasis>How can I exclude certain
internal systems from using the proxy? I want to allow those systems
to go directly to the net</emphasis>.</para>
<para>Suppose that you want to exclude 192.168.1.5 and 192.168.1.33
from the proxy. Your rules would then be:</para>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
# PORT(S) DEST
ACCEPT $FW net tcp www
REDIRECT loc:!192.168.1.5,192.168.1.33\
3128 tcp www - !206.124.146.177,130.252.100.0/24
ACCEPT loc net tcp www</programlisting>
<para>The last rule may be omitted if your loc-&gt;net policy is
ACCEPT.</para>
<para>In some cases (when running an LTSP server on the Shorewall
system), you might want to transparently proxy web connections that
originate on the firewall itself. This requires care to ensure that
Squid's own web connections are not proxied.</para>
<para>First, determine the user id that Squid is running under:</para>
<programlisting>gateway:/etc/shorewall# <emphasis role="bold">ps aux | fgrep -i squid | fgrep -v fgrep</emphasis>
root 10085 0.0 0.0 23864 700 ? Ss Apr22 0:00 /usr/sbin/squid -D -YC
<emphasis role="bold">proxy</emphasis> 10088 0.0 0.9 40512 19192 ? S Apr22 10:58 <emphasis
role="bold">(squid)</emphasis> -D -YC
gateway:/etc/shorewall# </programlisting>
<para>In this case, the proxy process <emphasis
role="bold">(squid)</emphasis> is running under the <emphasis
role="bold">proxy</emphasis> user Id. We add these rules:</para>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL RATE USER/
# PORT(S) DEST LIMIT GROUP
ACCEPT $FW net tcp www
REDIRECT $FW 3128 tcp www - - - <emphasis
role="bold"> !proxy</emphasis></programlisting>
</section>
<section id="Local">
<title>Squid (transparent) Running in the local network</title>
<para>You want to redirect all local www connection requests to a
Squid transparent proxy running in your local zone at 192.168.1.3 and
listening on port 3128. Your local interface is eth1. There may also
be a web server running on 192.168.1.3. It is assumed that web access
is already enabled from the local zone to the Internet.</para>
<orderedlist>
<listitem>
<para>Add this entry to your /etc/shorewall/providers file.</para>
<programlisting>#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS
Squid 1 202 - eth1 192.168.1.3 loose,notrack</programlisting>
</listitem>
<listitem>
<para>In <filename>/etc/shorewall/tcrules</filename> add:</para>
<programlisting>#MARK SOURCE DEST PROTO DEST
# PORT(S)
202:P eth1:!192.168.1.3 0.0.0.0/0 tcp 80</programlisting>
</listitem>
<listitem>
<para>In <filename> <filename>/etc/shorewall/interfaces</filename>
</filename>:</para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
loc eth1 detect <emphasis role="bold">routeback,routefilter=0,logmartians=0</emphasis> </programlisting>
</listitem>
<listitem>
<para>On 192.168.1.3, arrange for the following command to be
executed after networking has come up</para>
<programlisting><command>iptables -t nat -A PREROUTING -i eth0 ! -d 192.168.1.3 -p tcp --dport 80 -j REDIRECT --to-ports 3128</command> </programlisting>
<para>If you are running RedHat on the server, you can simply
execute the following commands after you have typed the iptables
command above:</para>
<programlisting><command>iptables-save &gt; /etc/sysconfig/iptables
chkconfig --level 35 iptables on</command> </programlisting>
</listitem>
</orderedlist>
</section>
<section id="DMZ">
<title>Squid (transparent) Running in the DMZ</title>
<para>You have a single system in your DMZ with IP address
192.0.2.177. You want to run both a web server and Squid on that
system.</para>
</section>
<section>
<title>Simple Configuration</title>
<para>In <filename>/etc/shorewall/rules</filename>:</para>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
# PORT(S) DEST
DNAT loc dmz:192.0.2.177:3128 tcp 80 - !192.0.2.177</programlisting>
</section>
<section>
<title>More Complex configuration</title>
<para>Assume that the dmz is connected through eth2 and that your
local lan interfaces through eth1</para>
<orderedlist>
<listitem>
<para>Add this entry to your /etc/shorewall/providers file.</para>
<programlisting>#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS
Squid 1 202 - eth2 192.0.2.177 loose,notrack</programlisting>
</listitem>
<listitem>
<para>In <filename>/etc/shorewall/tcrules</filename> add:</para>
<programlisting>#MARK SOURCE DEST PROTO DEST
# PORT(S)
202:P eth1 0.0.0.0/0 tcp 80</programlisting>
</listitem>
<listitem>
<para>In <filename> <filename>/etc/shorewall/interfaces</filename>
</filename>:</para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
loc eth2 detect <emphasis role="bold">routefilter=0,logmartians=0</emphasis> </programlisting>
</listitem>
<listitem>
<para>On 172.0.2.177, arrange for the following command to be
executed after networking has come up</para>
<programlisting><command>iptables -t nat -A PREROUTING -i eth0 ! -d 192.0.2.177 -p tcp --dport 80 -j REDIRECT --to-ports 3128</command> </programlisting>
<para>If you are running RedHat on the server, you can simply
execute the following commands after you have typed the iptables
command above:</para>
<programlisting><command>iptables-save &gt; /etc/sysconfig/iptables
chkconfig --level 35 iptables on</command> </programlisting>
</listitem>
</orderedlist>
</section>
</section>
</section>
<section id="Manual">
<title>Squid as a Manual Proxy</title>
<para>Assume that Squid is running in zone SZ and listening on port SP;
all web sites that are to be accessed through Squid are in the
<quote>net</quote> zone. Then for each zone Z that needs access to the
Squid server.</para>
<para><filename>/etc/shorewall/rules</filename>:</para>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
ACCEPT Z SZ tcp SP
ACCEPT SZ net tcp 80,443</programlisting>
<example id="Example1">
<title>Squid on the firewall listening on port 8080 with access from the
<quote>loc</quote> zone:</title>
<para><filename>/etc/shorewall/rules:</filename> <programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
ACCEPT loc $FW tcp 8080
ACCEPT $FW net tcp 80,443</programlisting></para>
</example>
</section>
<section id="TPROXY">
<title>Squid3 as a Transparent Proxy with TPROXY</title>
<para>Shorewall 4.5.4 contains support for TPROXY. TPROXY differs from
REDIRECT in that it does not modify the IP header and requires Squid 3 or
later. Because the IP header stays intact, TPROXY requires policy routing
to direct the packets to the proxy server running on the firewall. This
approach requires TPROXY support in your kernel and iptables and Squid 3.
See <ulink
url="http://wiki.squid-cache.org/Features/Tproxy4">http://wiki.squid-cache.org/Features/Tproxy4</ulink>.</para>
<note>
<para>Support for the TPROXY action in shorewall-tcrules(5) and the
<option>local</option> option in shorewall-providers(5) has been
available since Shoreall 4.4.7. That support required additional rules
to be added in the 'start' extention script to make it work
reliably.</para>
</note>
<para>The following configuration works with Squid running on the firewall
itself (assume that Squid is listening on port 3129 for TPROXY
connections).</para>
<para><filename>/etc/shorewall/interfaces:</filename></para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
- lo - -</programlisting>
<para><filename>/etc/shorewall/providers</filename>:</para>
<programlisting>#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY
Tproxy 1 - - lo - tproxy</programlisting>
<note>
<para>Notice that the MARK, DUPLICATE and GATEWAY columns are empty and
that the only option is <option>tproxy</option>.</para>
</note>
<para><filename>/etc/shorewall/tcrules</filename> (assume loc interface is
eth1 and net interface is eth0):</para>
<programlisting><emphasis role="bold">FORMAT 2</emphasis>
#MARK SOURCE DEST PROTO DEST SOURCE
# PORT(S) PORT(S)
DIVERT eth0 0.0.0.0/0 tcp - 80
TPROXY(3129) eth1 0.0.0.0/0 tcp 80</programlisting>
<para>The DIVERT rules are used to avoid unnecessary invocation of TPROXY
for request packets after the connection is established and to direct
response packets back to Squid3.</para>
<note>
<para>If you run a web server on the Shorewall system that also listens
on port 80, then you need to exclude it from TPROXY. Suppose that your
web server listens on 192.0.2.144; then:</para>
<programlisting><emphasis role="bold">FORMAT 2</emphasis>
#MARK SOURCE DEST PROTO DEST SOURCE
# PORT(S) PORT(S)
DIVERT eth0 0.0.0.0/0 tcp - 80
TPROXY(3129) eth1 !192.0.2.144 tcp 80 -</programlisting>
</note>
<para>/etc/shorewall/rules:</para>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
ACCEPT loc $FW tcp 80
ACCEPT $FW net tcp 80</programlisting>
<para><filename>/etc/squid3/squid.conf</filename>:</para>
<programlisting>...
http_port 3129 tproxy
...</programlisting>
<important>
<para>If you use TPROXY with both IPv4 and IPv6, then both your local
hosts and the gateway must have the same DNS view. If a client resolves
a website URL to an IPv6 address and the server can only resolve to an
IPv4 address, then Squid will attempt to connect to the IPv4 address
using the local client's IPv6 address. That clearly doesn't work.</para>
</important>
</section>
</article>
Reference in New Issue View Git Blame Copy Permalink