mirror of
https://gitlab.com/shorewall/code.git
synced 2024-11-08 00:34:04 +01:00
0e62b7338f
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@3892 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
100 lines
3.6 KiB
Plaintext
100 lines
3.6 KiB
Plaintext
#
|
|
# Shorewall version 3.2 - Providers File
|
|
#
|
|
# /etc/shorewall/providers
|
|
#
|
|
# This file is used to define additional routing tables. You will
|
|
# want to define an additional table if:
|
|
#
|
|
# - You have connections to more than one ISP or multiple connections
|
|
# to the same ISP
|
|
#
|
|
# - You run Squid as a transparent proxy on a host other than the
|
|
# firewall.
|
|
#
|
|
# To omit a column, enter "-".
|
|
#
|
|
# Columns are:
|
|
#
|
|
# NAME The provider name. Must be a valid shell variable name.
|
|
# The names 'local', 'main', 'default' and 'unspec' are
|
|
# reserved and may not be used as provider names.
|
|
#
|
|
# NUMBER The provider number -- a number between 1 and 15
|
|
#
|
|
# MARK A FWMARK value used in your /etc/shorewall/tcrules
|
|
# file to direct packets to this provider.
|
|
#
|
|
# If HIGH_ROUTE_MARKS=Yes in shorewall.conf, then the
|
|
# value must be a multiple of 256 between 256 and 65280
|
|
# or their hexadecimal equivalents (0x0100 and 0xff00
|
|
# with the low-order byte of the value being zero).
|
|
# Otherwise, the value must be between 1 and 255.
|
|
#
|
|
# DUPLICATE The name of an existing table to duplicate. May be
|
|
# 'main' or the name of a previous provider.
|
|
#
|
|
# INTERFACE The name of the network interface to the provider.
|
|
# Must be listed in /etc/shorewall/interfaces.
|
|
#
|
|
# GATEWAY The IP address of the provider's gateway router.
|
|
#
|
|
# You can enter "detect" here and Shorewall will
|
|
# attempt to detect the gateway automatically.
|
|
#
|
|
# OPTIONS A comma-separated list selected from the following:
|
|
#
|
|
# track If specified, inbound connections on this interface
|
|
# are to be tracked so that responses may be routed back
|
|
# out this same interface.
|
|
#
|
|
# You want to specify 'track' if internet hosts will be
|
|
# connecting to local servers through this provider.
|
|
#
|
|
# balance The providers that have 'balance' specified will
|
|
# get outbound traffic load-balanced among them. By
|
|
# default, all interfaces with 'balance' specified
|
|
# will have the same weight (1). You can change the
|
|
# weight of an interface by specifiying balance=<weight>
|
|
# where <weight> is the weight of the route out of
|
|
# this interface.
|
|
#
|
|
# loose Shorewall normally adds a routing rule for each
|
|
# IP address on an interface which forces traffic
|
|
# whose source is that IP address to be sent using
|
|
# the routing table for that interface. Setting
|
|
# 'loose' prevents creation of such rules on this
|
|
# interface.
|
|
#
|
|
# COPY A comma-separated lists of other interfaces on your
|
|
# firewall. Only makes sense when DUPLICATE is 'main'.
|
|
# Only copy routes through INTERFACE and through
|
|
# interfaces listed here. If you only wish to copy
|
|
# routes through INTERFACE, enter 'none' here.
|
|
#
|
|
# Example: You run squid in your DMZ on IP address 192.168.2.99. Your DMZ
|
|
# interface is eth2
|
|
#
|
|
# #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS
|
|
# Squid 1 1 - eth2 192.168.2.99 -
|
|
#
|
|
# Example:
|
|
#
|
|
# eth0 connects to ISP 1. The IP address of eth0 is 206.124.146.176 and
|
|
# the ISP's gateway router has IP address 206.124.146.254.
|
|
#
|
|
# eth1 connects to ISP 2. The IP address of eth1 is 130.252.99.27 and the
|
|
# ISP's gateway router has IP address 130.252.99.254.
|
|
#
|
|
# eth2 connects to a local network.
|
|
#
|
|
# #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY
|
|
# ISP1 1 1 main eth0 206.124.146.254 track,balance eth2
|
|
# ISP2 2 2 main eth1 130.252.99.254 track,balance eth2
|
|
#
|
|
# For additional information, see http://shorewall.net/MultiISP.html
|
|
#
|
|
############################################################################################
|
|
#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY
|
|
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
|