shorewall_code/docs/ipsets.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Shorewall and Ipsets</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate><?dbtimestamp format="Y/m/d"?></pubdate>

    <copyright>
      <year>2005</year>

      <year>2008</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <section id="Ipsets">
    <title>What are Ipsets?</title>

    <para>Ipsets are an extension to Netfilter/iptables that are currently
    available in Patch-O-Matic-ng (<ulink
    url="http://www.netfilter.org">http://www.netfilter.org</ulink>). Using
    ipsets requires that you patch your kernel and iptables and that you build
    and install the ipset utility from <ulink
    url="http://ipset.netfilter.org/">http://ipset.netfilter.org/</ulink>.</para>

    <para>Ipset allows you to create one or more named sets of addresses then
    use those sets to define Netfilter/iptables rules. Possible uses of ipsets
    include:</para>

    <orderedlist>
      <listitem>
        <para>Blacklists. Ipsets provide an efficient way to represent large
        sets of addresses and you can maintain the lists without the need to
        restart or even refresh your Shorewall configuration.</para>
      </listitem>

      <listitem>
        <para>Zone definition. Using the /etc/shorewall/hosts file, you can
        define a zone based on the (dynamic) contents of an ipset. Again, you
        can then add or delete addresses to the ipset without restarting
        Shorewall.</para>
      </listitem>
    </orderedlist>

    <para>See the ipsets site (URL above) for additional information about
    ipsets.</para>
  </section>

  <section id="Support">
    <title>Shorewall Support for Ipsets</title>

    <para>Support for ipsets was introduced in Shorewall version 2.3.0. In
    most places where a host or network address may be used, you may also use
    the name of an ipset prefaced by "+".</para>

    <para>Example: "+Mirrors"</para>

    <para>When using Shorewall-perl, the names of ipsets are restricted as
    follows:</para>

    <itemizedlist>
      <listitem>
        <para>They must begin with a letter (after the '+').</para>
      </listitem>

      <listitem>
        <para>They must be composed of letters, digits or underscores
        ("_").</para>
      </listitem>
    </itemizedlist>

    <para>The name of the set may optionally followed by:</para>

    <orderedlist numeration="loweralpha">
      <listitem>
        <para>a number from 1 to 6 enclosed in square brackets ([]) -- this
        number indicates the maximum number of ipset binding levels that are
        to be matched. Depending on the context where the ipset name is used,
        either all "src" or all "dst" matches will be used.</para>

        <para>Example: "+Mirrors[4]"</para>
      </listitem>

      <listitem>
        <para>a series of "src" and "dst" options separated by commas and
        enclosed in square brackets ([]). These will be passed directly to
        iptables in the generated --set clause. See the ipset documentation
        for details.</para>

        <para>Example: "+Mirrors[src,dst,src]"</para>

        <para>Note that "+Mirrors[4]" used in the SOURCE column of the rules
        file is equivalent to "+Mirrors[src,src,src,src]".</para>
      </listitem>
    </orderedlist>

    <para>To generate a negative match, prefix the "+" with "!" as in
    "!+Mirrors".</para>

    <para>Example 1: Blacklist all hosts in an ipset named "blacklist"</para>

    <para><filename>/etc/shorewall/blacklist</filename><programlisting>#ADDRESS/SUBNET         PROTOCOL        PORT
+blacklist</programlisting></para>

    <para>Example 2: Allow SSH from all hosts in an ipset named "sshok:</para>

    <para><filename>/etc/shorewall/rules</filename><programlisting>#ACTION      SOURCE      DEST     PROTO    DEST PORT(S)
ACCEPT       +sshok      $FW      tcp      22</programlisting></para>

    <para>If you are running Shorewall-shell:</para>

    <blockquote>
      <para>Shorewall can automatically manage the contents of your ipsets for
      you. If you specify SAVE_IPSETS=Yes in /etc/shorewall/shorewall.conf
      then "shorewall save" will save the contents of your ipsets. The file
      where the sets are saved is formed by taking the name where the
      Shorewall configuration is stored and appending "-ipsets". So if you
      enter the command "shorewall save standard" then Shorewall will save the
      file as /var/lib/shorewall/standard-ipsets</para>

      <para>Regardless of the setting of SAVE_IPSETS, the <command>shorewall
      -f start</command> and <command>shorewall restore</command> commands
      will restore the ipset contents corresponding to the Shorewall
      configuration restored provided that the saved Shorewall configuration
      specified exists.</para>

      <para>For example, <command>shorewall restore standard</command> would
      restore the ipset contents from
      <filename>/var/lib/shorewall/standard-ipsets</filename> provided that
      <filename>/var/lib/shorewall/standard</filename> exists and is
      executable and that
      <filename>/var/lib/shorewall/standard-ipsets</filename> exists and is
      executable.</para>

      <para>Also regardless of the setting of SAVE_IPSETS, the
      <command>shorewall forget</command> command will purge the saved ipset
      information (if any) associated with the saved shorewall configuration
      being removed.</para>

      <para>You can also associate ipset contents with Shorewall configuration
      directories using the following command:</para>

      <programlisting><command>ipset -S &gt; &lt;config directory&gt;/ipsets</command></programlisting>

      <para>Example:</para>

      <programlisting><command>ipset -S &gt; /etc/shorewall/ipsets</command></programlisting>

      <para>When you start or restart Shorewall (including using the
      <command>try</command> command) from the configuration directory, your
      ipsets will be configured from the saved ipsets file. Once again, this
      behavior is independent of the setting of SAVE_IPSETS.</para>

      <para>As mentioned above, ipsets are well suited for large blacklists.
      You can maintain your blacklist using the 'ipset' utility without ever
      having to restart or refresh Shorewall. If you use the SAVE_IPSETS=Yes
      feature just be sure to "shorewall save" after altering the blacklist
      ipset(s).</para>
    </blockquote>

    <para>If you are running Shorewall-perl:</para>

    <blockquote>
      <para>Shorewall is now out of the ipset load/reload business. With
      scripts generated by the Perl-based Compiler, the Netfilter rule set is
      never cleared. That means that there is no opportunity for Shorewall to
      load/reload your ipsets since that cannot be done while there are any
      current rules using ipsets.</para>

      <para>So:</para>

      <orderedlist numeration="upperroman">
        <listitem>
          <para>Your ipsets must be loaded before Shorewall starts. You are
          free to try to do that with the following code in
          <filename>/etc/shorewall/init (it works for me; your mileage may
          vary)</filename>:</para>

          <programlisting>if [ "$COMMAND" = start ]; then
    ipset -U :all: :all:
    ipset -U :all: :default:
    ipset -F
    ipset -X
    ipset -R &lt; /etc/shorewall/ipsets
fi</programlisting>

          <para>The file <filename>/etc/shorewall/ipsets</filename> will
          normally be produced using the <command>ipset -S</command>
          command.</para>

          <para>The above will work most of the time but will fail in a
          <command>shorewall stop</command> - <command>shorewall
          start</command> sequence if you use ipsets in your routestopped file
          (see below).</para>
        </listitem>

        <listitem>
          <para>Your ipsets may not be reloaded until Shorewall is stopped or
          cleared.</para>
        </listitem>

        <listitem>
          <para>If you specify ipsets in your routestopped file then Shorewall
          must be cleared in order to reload your ipsets.</para>
        </listitem>
      </orderedlist>

      <para>As a consequence, scripts generated by the Perl-based compiler
      will ignore <filename>/etc/shorewall/ipsets</filename> and will issue a
      warning if you set SAVE_IPSETS=Yes in
      <filename>shorewall.conf</filename>.</para>
    </blockquote>

    <para>Example (Note -- this example is applicable to ipset versions up to
    and including 2.4. In 2.5, the binding feature of ipsets is scheduled for
    removal in favor of different set types that include both IP addresses and
    port numbers. Check your ipset documentation):</para>

    <para><filename>/etc/shorewall/blacklist</filename>:</para>

    <programlisting>#ADDRESS/SUBNET         PROTOCOL        PORT
+Blacklist[src,dst]
+Blacklistnets[src,dst]</programlisting>

    <para>Create the blacklist ipsets using:</para>

    <programlisting><command>ipset -N Blacklist iphash
ipset -N Blacklistnets nethash</command></programlisting>

    <para>Add entries:</para>

    <programlisting><command>ipset -A Blacklist 206.124.146.177
ipset -A Blacklistnets 206.124.147.0/24</command></programlisting>

    <para>To allow entries for individual ports:</para>

    <programlisting><command>ipset -N SMTP portmap --from 1 --to 31
ipset -A SMTP 25

ipset -A Blacklist 206.124.146.177
ipset -B Blacklist 206.124.146.177 -b SMTP</command></programlisting>

    <para>Now only port 25 will be blocked from 206.124.146.177.</para>
  </section>

  <section id="Dynamic">
    <title>Defining Dynamic Zones using Ipsets</title>

    <para>The use of ipsets provides a much better way to define dynamic zones
    than is provided by the native Shorewall implementation. To define a
    dynamic zone of hosts <emphasis role="bold">dyn</emphasis> that interface
    through interface eth3, use:</para>

    <para>/etc/shorewall/zones:</para>

    <programlisting>#ZONE         TYPE         OPTIONS            IN OPTIONS        OUT OPTIONS
dyn           ipv4</programlisting>

    <para>/etc/shorewall/interfaces:</para>

    <programlisting>#ZONE         INTERFACE     OPTIONS
-             eth3          …</programlisting>

    <para>/etc/shorewall/hosts:</para>

    <programlisting>#ZONE         HOSTS         OPTIONS
dyn           eth3:+Dyn</programlisting>

    <para>Now create an ipmap named <emphasis role="bold">Dyn</emphasis> and
    you're all set. You can add and delete addresses from Dyn without having
    to touch Shorewall.</para>
  </section>
</article>