shorewall_code/Shorewall-docs2/Xen.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Xen and Shorewall</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate>2006-01-01</pubdate>

    <copyright>
      <year>2006</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <section>
    <title>Xen Network Environment</title>

    <para><ulink
    url="http://www.cl.cam.ac.uk/Research/SRG/netos/xen/">Xen</ulink> is a
    <firstterm>paravirtualization</firstterm> tool that allows you to run
    multiple virtual machines on one physical machine. It is available on a
    wide number of platforms and is included in recent
    <trademark>SuSE</trademark> distributions.</para>

    <para>Xen refers to the virtual machines as
    <firstterm>Domains</firstterm>. Domains are numbered with the first domain
    being domain 0, the second domain 1, and so on. Domain 0 is special
    because that is the domain created when to machine is booted. Additional
    domains are created using the <command>xm create</command> command from
    within Domain 0. Additional domains can also be created automatically at
    boot time by using the <command>xendomains</command> service.</para>

    <para>Xen virtualizes a network interface named <filename
    class="devicefile">eth0</filename><footnote>
        <para>This assumes the default Xen configuration created by
        <command>xend </command>and assumes that the host system has a single
        ethernet interface named <filename
        class="devicefile">eth0</filename>.</para>
      </footnote> in each domain. In domain 0, Xen also creates a bridge
    (<filename class="devicefile">xenbr0</filename>) and a number of virtual
    interfaces as shown in the following diagram.</para>

    <graphic align="center" fileref="images/Xen1.png" />

    <para>I use the term <firstterm>Extended Domain 0</firstterm> to
    distinguish the bridge and virtual interfaces from domain 0 itself. That
    distinction is important when we try to apply Shorewall in this
    environment.</para>

    <para>The bridge has a number of ports:</para>

    <itemizedlist>
      <listitem>
        <para>peth0 — This is the port that connects to the physical network
        interface in your system.</para>
      </listitem>

      <listitem>
        <para>vif0.0 — This is the bridge port that is used by traffic to/from
        Domain 0.</para>
      </listitem>

      <listitem>
        <para>vifX.0 — This is the bridge port that is used by traffic to/from
        Domain X.</para>
      </listitem>
    </itemizedlist>
  </section>

  <section>
    <title>Configuring Shorewall in Domain 0</title>

    <para>As I state in the answer to <ulink url="FAQ.htm#faq2">Shorewall FAQ
    2</ulink>, I object to running servers in a local zone because if the
    server becomes compromised then there is no protection between that
    compromised server and the other local systems. Xen allows me to safely
    run Internet-accessible servers in my local zone by creating a firewall in
    (the Extended) Domain 0 to isolate the server(s) from the other local
    systems (including Domain 0).</para>

    <para>Here is an example. In this example, we will assume that the system
    is behind a second firewall that restricts incoming traffic so that we
    only have to worry about protecting the local lan from the systems running
    in domains other than domain 0.</para>

    <note>
      <para>This is the real <ulink url="myfiles.htm">configuration which I
      run at shorewall.net</ulink>.</para>
    </note>

    <section>
      <title>/etc/shorewall/zones</title>

      <para>One thing strange about configuring Shorewall in this environment
      is that Domain 0 is defined as two different zones. It is defined as the
      firewall zone and it is also defined as "all systems connected to
      <filename class="devicefile">xenbr0:vif0.0</filename>. In this case, I
      call this second zone <emphasis role="bold">ursa</emphasis> (which is
      the name given to the virtual system running in Domain 0); that zone
      corresponds roughly to what is shown as the Extended Domain 0
      above.</para>

      <blockquote>
        <programlisting>#                                       OPTIONS                 OPTIONS
fw      firewall                        #Domain 0
ursa    ipv4                            #Domain 0 on the bridge
dmz     ipv4                            #Server(s) running in Domains other than 0
net     ipv4                            #The local LAN and beyond
#LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
      </blockquote>
    </section>

    <section>
      <title>/etc/shorewall/interfaces</title>

      <para>We must deal with two network interfaces. We must deal with the
      (virtualized) eth0 and we must also deal with the bridge (xenbr0)
      created by Xen.</para>

      <blockquote>
        <programlisting>#ZONE   INTERFACE       BROADCAST       OPTIONS
-       xenbr0          -               dhcp
net     eth0            detect          dhcp
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
      </blockquote>
    </section>

    <section>
      <title>/etc/shorewall/hosts</title>

      <para>Here we define the zones <emphasis role="bold">ursa</emphasis> and
      <emphasis role="bold">dmz</emphasis> and we extend the definition of the
      zone <emphasis role="bold">net</emphasis>.<blockquote>
          <programlisting>#ZONE   HOST(S)                                 OPTIONS
ursa    xenbr0:vif0.0
dmz     xenbr0:vif+<footnote>
              <para>There is a bug in Shorewall versions prior to 3.0.4 that treats all bridge ports as if they had routeback specified. I recommend that you run a Shorewall verison &gt; 3.0.3 if you run Xen.</para>
            </footnote>
net     xenbr0:peth0
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS LINE -- DO NOT REMOVE</programlisting>
        </blockquote></para>

      <para>Note that the <emphasis role="bold">net</emphasis> zone has two
      different interfaces. From the point of view of Domain 0 (which is where
      Shorewall runs), the <emphasis role="bold">net</emphasis> zone comprises
      everything except Domain 0. From the point of view of the Extended
      Domain 0, the <emphasis role="bold">net</emphasis> zone is everything
      connected (directly or indirectly) to the <filename
      class="devicefile">peth0</filename> port on the bridge.</para>
    </section>

    <section>
      <title>/etc/shorewall/policy</title>

      <para>The policies shown here effectively isolate Domains 1...N.</para>

      <blockquote>
        <programlisting>#SOURCE         DEST            POLICY          LOG             LIMIT:BURST
#                                               LEVEL
all             fw              ACCEPT
fw              all             ACCEPT
ursa            all             ACCEPT
net             ursa            ACCEPT
net             net             NONE
all             all             REJECT          info
#LAST LINE -- DO NOT REMOVE
</programlisting>
      </blockquote>
    </section>

    <section>
      <title>/etc/shorewall/rules</title>

      <para>These rules determine the traffic allowed into and out of the
      <emphasis role="bold">dmz</emphasis> zone.</para>

      <blockquote>
        <programlisting>#
# "Net' to DMZ
#
ACCEPT          net                dmz                     udp     domain
ACCEPT          net                dmz                     tcp     www,smtp,smtps,domain,ssh,imap,rsync,https,imaps,ftp,10023,pop3,3128
Trcrt/ACCEPT    net                dmz
#
# DMZ to 'Net'
#
ACCEPT          dmz                net:!192.168.0.0/22     udp     domain,ntp
ACCEPT          dmz                net:!192.168.0.0/22     tcp     echo,ftp,ssh,smtp,whois,domain,www,81,https,rsync,cvspserver,2702,2703,8080
ACCEPT          dmz                net:$POPSERVERS         tcp     pop3
Ping/ACCEPT     dmz                net

Ping/ACCEPT     dmz                ursa</programlisting>
      </blockquote>

      <para>Here, 192.168.0.0/22 comprises my local network.</para>

      <para>From the point of view of Shorewall, the zone diagram is as shown
      in the following diagram.</para>

      <graphic align="center" fileref="images/Xen2.png" />
    </section>
  </section>
</article>