refactor for future ipv6 support

hack/compose.yml

@@ -8,7 +8,10 @@ services:
     cap_add:
       - "NET_ADMIN"
     environment:
-      - IP_ADDRESSES=10.55.1.77/24
+      - ADD_IP_ADDRESSES=10.55.1.77/24
+    networks:
+      default:
+        ipv6_address: 2001:0DB8::551
   node-2:
     image: ghcr.io/sshuttle/sshuttle-testbed
     container_name: sshuttle-testbed-node-2
@@ -16,9 +19,16 @@ services:
     cap_add:
       - "NET_ADMIN"
     environment:
-      - IP_ADDRESSES=10.55.2.77/32
+      - ADD_IP_ADDRESSES=10.55.2.77/32
+    networks:
+      default:
+        ipv6_address: 2001:0DB8::552
 
 networks:
   default:
     driver: bridge
+    enable_ipv6: true
+    ipam:
+       config:
+         - subnet: 2001:0DB8::/112
     # internal: true

hack/exec-sshuttle

@@ -11,7 +11,6 @@ function with_set_x() {
     } 2>/dev/null
 }
 
-
 ssh_cmd='ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null'
 args=()
 while [[ $# -gt 0 ]]; do
@@ -24,13 +23,16 @@ while [[ $# -gt 0 ]]; do
     --copy-id)
         ssh_copy_id=true
         continue
-    ;;
+        ;;
+    -6)
+        ipv6_only=true
+        continue
+        ;;
     --sshuttle-bin=*)
         sshuttle_bin="${arg#*=}"
         continue
-    ;;
-    -*)
         ;;
+    -*) ;;
     *)
         if [[ -z "$node" ]]; then
             node=$arg
@@ -41,19 +43,22 @@ while [[ $# -gt 0 ]]; do
     args+=("$arg")
 done
 
-
 port="2222"
 user="test:test"
 
 if [[ $node == node-* ]]; then
     host=$("$(dirname "$0")/test-bed" get-ip "$node")
     index=${node#node-}
-    args+=("10.55.$index.0/24")
+    if [[ $ipv6_only == true ]]; then
+        args+=("2001:0DB8::/112")
+    else
+        args+=("10.55.$index.0/24")
+    fi
 else
     host=$node
 fi
 
-if [[ "${args[$(( ${#args[@]} - 1 ))]}" !=  *.* && "${args[$(( ${#args[@]} - 1 ))]}" !=  *:* ]]; then
+if [[ "${args[$((${#args[@]} - 1))]}" != *.* && "${args[$((${#args[@]} - 1))]}" != *:* ]]; then
     echo "No subnet specified. Using -N" >&2
     args+=('-N')
 fi
@@ -68,7 +73,7 @@ if [[ $ssh_copy_id == true ]]; then
     with_set_x ssh-copy-id -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -p "$port" "$user@$host"
 fi
 
-if [[ -z $sshuttle_bin ||  "$sshuttle_bin" == dev ]]; then
+if [[ -z $sshuttle_bin || "$sshuttle_bin" == dev ]]; then
     cd "$(dirname "$0")/.."
     export PYTHONPATH="."
     sshuttle_bin="./run"
@@ -76,5 +81,4 @@ fi
 
 set -x
 
-exec "${sshuttle_bin}" -r "$user@$host:$port" --ssh-cmd "$ssh_cmd" "${args[@]}" 
-
+exec "${sshuttle_bin}" -r "$user@$host:$port" --ssh-cmd "$ssh_cmd" "${args[@]}"

hack/exec-tool

@@ -1,13 +1,39 @@
 #!/usr/bin/env bash
 set -e
 
-tool=${1?:"tool argument missing. should be one of iperf3,ping,curl,ab"}
-node=${2?:"node argument missing. should be 'node-1' , 'node-2' etc"}
-shift 2
+args=()
+while [[ $# -gt 0 ]]; do
+    arg=$1
+    shift
+    case "$arg" in
+    -6)
+        ipv6_only=true
+        continue
+        ;;
+    -*) ;;
+    *)
+        if [[ -z $tool ]]; then
+            tool=$arg
+            continue
+        elif [[ -z $node ]]; then
+            node=$arg
+            continue
+        fi
+        ;;
+    esac
+    args+=("$arg")
+done
+
+tool=${tool?:"tool argument missing. should be one of iperf3,ping,curl,ab"}
+node=${node?:"node argument missing. should be 'node-1' , 'node-2' etc"}
 
 if [[ $node == node-* ]]; then
     index=${node#node-}
-    host="10.55.$index.77"
+    if [[ $ipv6_only == true ]]; then
+        host="2001:0DB8::55$index"
+    else
+        host="10.55.$index.77"
+    fi
 else
     host=$node
 fi
@@ -26,22 +52,26 @@ function with_set_x() {
 
 case "$tool" in
 ping)
-    with_set_x exec ping -W $connect_timeout_sec "$@" "$host"
+    with_set_x exec ping -W $connect_timeout_sec "${args[@]}" "$host"
     ;;
 iperf3)
     port=5001
-    with_set_x exec iperf3 --client "$host" --port=$port --connect-timeout=$((connect_timeout_sec * 1000)) "$@"
+    with_set_x exec iperf3 --client "$host" --port=$port --connect-timeout=$((connect_timeout_sec * 1000)) "${args[@]}"
     ;;
 curl)
     port=8080
-    with_set_x exec curl "http://$host:$port/" -v --connect-timeout $connect_timeout_sec "$@"
+    if [[ $host = *:* ]]; then
+        host="[$host]"
+        args+=(--ipv6)
+    fi
+    with_set_x exec curl "http://$host:$port/" -v --connect-timeout $connect_timeout_sec "${args[@]}"
     ;;
 ab)
     port=8080
-    if [[ " $*" != *" -n "* && " $*" != *" -c "* ]]; then
-        set -- -n 500 -c 50 "$@"
+    if [[ " ${args[*]}" != *" -n "* && " ${args[*]}" != *" -c "* ]]; then
+        args+=(-n 500 -c 50 "${args[@]}")
     fi
-    with_set_x exec ab -s $connect_timeout_sec "$@" "http://$host:$port/"
+    with_set_x exec ab -s $connect_timeout_sec "${args[@]}" "http://$host:$port/"
     ;;
 *)
     echo "Unknown tool: $tool" >&2

hack/setup.service

@@ -17,7 +17,7 @@ function with_set_x() {
 
 iface="$(ip route | awk '/default/ { print $5 }')"
 default_gw="$(ip route | awk '/default/ { print $3 }')"
-for addr in ${IP_ADDRESSES//,/ }; do
+for addr in ${ADD_IP_ADDRESSES//,/ }; do
     echo ">>> Adding $addr to interface $iface"
     net_addr=$(ipcalc -n "$addr" | awk -F= '{print $2}')
     with_set_x ip addr add "$addr" dev "$iface"

sshuttle/methods/windivert.py

@@ -255,8 +255,8 @@ class ConnTrack:
             state_epoch,
             state,
         ) = self.struct_full_tuple.unpack(packed)
-        dst_addr = str(ip_address(dst_addr_packed if ip_version == 6 else dst_addr_packed[:4]))
-        src_addr = str(ip_address(src_addr_packed if ip_version == 6 else src_addr_packed[:4]))
+        dst_addr = ip_address(dst_addr_packed if ip_version == 6 else dst_addr_packed[:4]).exploded
+        src_addr = ip_address(src_addr_packed if ip_version == 6 else src_addr_packed[:4]).exploded
         return ConnectionTuple(
             IPProtocol(proto), ip_version, src_addr, src_port, dst_addr, dst_port, state_epoch, ConnState(state)
         )
@@ -306,14 +306,15 @@ class Method(BaseMethod):
         # As a workaround, finding another interface ip instead. (client should not bind proxy to loopback address)
         local_addr = self._get_bind_addresses_for_port(proxy_port, family)
         for addr in (ip_address(info[4][0]) for info in socket.getaddrinfo(socket.gethostname(), None)):
-            if addr.is_loopback or addr.version != family.version:
+            if addr.version != family.version or addr.is_loopback or addr.is_link_local:
                 continue
             if local_addr.is_unspecified or local_addr == addr:
-                debug2("Found non loopback address to connect to proxy: " + str(addr))
-                proxy_ip = str(addr)
+                proxy_ip = addr.exploded
+                debug2("Found non loopback address to connect to proxy: " + proxy_ip)
                 break
         else:
-            raise Fatal("Windivert method requires proxy to listen on a non loopback address")
+            raise Fatal("Windivert method requires proxy to be reachable by a non loopback address."
+                        f"No addersss found for {family.name}")
 
         subnet_addresses = []
         for (_, mask, exclude, network_addr, fport, lport) in subnets:
@@ -388,15 +389,18 @@ class Method(BaseMethod):
             subnet_filters = []
             for cidr in c["subnets"]:
                 ip_net = ip_network(cidr)
-                first_ip = ip_net.network_address
-                last_ip = ip_net.broadcast_address
+                first_ip = ip_net.network_address.exploded
+                last_ip = ip_net.broadcast_address.exploded
                 subnet_filters.append(f"({af.filter}.DstAddr>={first_ip} and {af.filter}.DstAddr<={last_ip})")
+            if not subnet_filters:
+                continue
             proxy_ip, proxy_port = c["proxy_addr"]
             proxy_guard_filter = f'({af.filter}.DstAddr!={proxy_ip} or tcp.DstPort!={proxy_port})'
             family_filters.append(f"{af.filter} and ({' or '.join(subnet_filters)}) and {proxy_guard_filter}")
+        if not family_filters:
+            raise Fatal("At least one ipv4 or ipv6 subnet is expected")
 
         filter = f"{filter} and ({' or '.join(family_filters)})"
-
         debug1(f"[EGRESS] {filter=}")
         with pydivert.WinDivert(filter, layer=pydivert.Layer.NETWORK, flags=pydivert.Flag.DEFAULT) as w:
             ready_cb()
@@ -444,6 +448,8 @@ class Method(BaseMethod):
         direction = "outbound"
         proxy_addr_filters = []
         for af, c in self.network_config.items():
+            if not c["subnets"]:
+                continue
             proxy_ip, proxy_port = c["proxy_addr"]
             # "ip.SrcAddr=={hex(int(proxy_ip))}" # only Windivert >=2 supports this
             proxy_addr_filters.append(f"{af.filter}.SrcAddr=={proxy_ip} and tcp.SrcPort=={proxy_port}")