Previously, we would find DNS servers we wish to intercept traffic on
by reading /etc/resolv.conf. On systems using systemd-resolved,
/etc/resolv.conf points to localhost and then systemd-resolved
actually uses the DNS servers listed in
/run/systemd/resolve/resolv.conf. Many programs will route the DNS
traffic through localhost as /etc/resolv.conf indicates and sshuttle
would capture it. However, systemd-resolved also provides other
interfaces for programs to resolve hostnames besides the localhost
server in /etc/resolv.conf.
This patch adds systemd-resolved's servers into the list of DNS
servers when --dns is used.
Note that sshuttle will continue to fail to intercept any traffic sent
to port 853 for DNS over TLS (which systemd-resolved also supports).
For more info, see:
sshuttle issue #535https://www.freedesktop.org/software/systemd/man/systemd-resolved.service.htmlhttps://github.com/systemd/systemd/issues/6076
Update docs to indicate that IPv6 is supported with the nft method.
- Adds nft into the requirements.rst file.
- Update description of what happens when a hostname is used in a
subnet.
- Add ipfw to list of methods.
- Indicate that --auto-nets does not work with IPv6. Previously this
was only mentioned in tproxy.rst
- Clarify that we try to use "python3" on the server before trying
"python".
* added sudoers options to command line arguments
* added sudoers options to command line arguments
* template for sudoers file
* Added option for GUI sudo
* added support for GUI sudo
* script for auto adding sudo file
* sudoers auto add works and validates
* small change
* Clean up for CI
* removed code that belongs in another PR
* added path for package bins
* added sudoers bin
* added sudoers-add to setup file
* fixed issue with sudoers bash script
* auto sudoers now works
* added --sudoers-no-modify option
* bin now works with ./run
* removed debug print
* Updated sudoers-add script
* Fixed error passing sudoers config to script
* more dynamic building of sudoers file
* added option to specify sudoers.d file name
* fixed indent issue
* fixed indent issue
* indent issue
* clean up
* formating
* docs
* fix for flags
* Update usage.rst
* removed shell=true
* cleared CI errors
* cleared CI errors
* removed random
* cleared linter issue
* cleared linter issue
* cleared linter issue
* updated sudoers-add script
* safer temp file
* moved bin directory
* moved bin directory
* removed print
* fixed spacing issue
* sudoers commands must only containe upper case latters
This commit resolves#297, allowing the buffers used in the latency control to be changed with a command line option ‘--latency-buffer-size’.
We do this by changing a module variable in ssnet.py (similar to the MAX_CHANNEL variable) which seems to be the simplest code change without extensive hacking.
Documentation is also updated.
--ns-hosts is available since commit d2ee34d71c
("dns: Added --ns-hosts to tunnel only some requests")
(released as v0.72), but was never documented.
--to-ns is available since commit be559fc78b
("Fix case where there is no --dns.") after several
bugfixes, released as v0.78.4, but was never
documented.
* Adds support for tunneling specific port ranges
This set of changes implements the ability of specifying a port or port
range for an IP or subnet to only tunnel those ports for that subnet.
Also supports excluding a port or port range for a given IP or subnet.
When, for a given subnet, there are intercepting ranges being added and
excluded, the most specific, i.e., smaller range, takes precedence. In
case of a tie the exclusion wins.
For different subnets, the most specific, i.e., largest swidth, takes
precedence independent of any eventual port ranges.
Examples:
Tunnels all traffic to the 188.0.0.0/8 subnet except those to port 443.
```
sshuttle -r <server> 188.0.0.0/8 -x 188.0.0.0/8:443
```
Only tunnels traffic to port 80 of the 188.0.0.0/8 subnet.
```
sshuttle -r <server> 188.0.0.0/8:80
```
Tunnels traffic to the 188.0.0.0/8 subnet and the port range that goes
from 80 to 89.
```
sshuttle -r <server> 188.0.0.0/8:80-89 -x 188.0.0.0/8:80-90
```
* Allow subnets to be specified with domain names
Simplifies the implementation of address parsing by using
socket.getaddrinfo(), which can handle domain resolution, IPv4 and IPv6
addresses. This was proposed and mostly implemented by @DavidBuchanan314
in #146.
Signed-off-by: David Buchanan <DavidBuchanan314@users.noreply.github.com>
Signed-off-by: João Vieira <vieira@yubo.be>
* Also use getaddrinfo for parsing listen addr:port
* Fixes tests for tunneling a port range
* Updates documentation to include port/port range
Adds some examples with subnet:port and subnet:port-port.
Also clarifies the versions of Python supported on the server while
maintaining the recommendation for Python 2.7, 3.5 or later.
Mentions support for pfSense.
* In Py2 only named arguments may follow *expression
Fixes issue in Python 2.7 where *expression may only be followed by
named arguments.
* Use right regex to extract ip4/6, mask and ports
* Tests for parse_subnetport
