mirror of
https://github.com/sshuttle/sshuttle.git
synced 2024-11-24 00:44:07 +01:00
29 lines
1.1 KiB
ReStructuredText
29 lines
1.1 KiB
ReStructuredText
Microsoft Windows
|
|
=================
|
|
|
|
Experimental native support::
|
|
|
|
Experimental built-in support for Windows is available through `windivert` method.
|
|
You have to install https://pypi.org/project/pydivert package. You need Administrator privileges to use windivert method
|
|
|
|
Notes
|
|
- sshuttle should be executed from admin shell (Automatic firewall process admin elevation is not available)
|
|
- TCP/IPv4 supported (IPv6/UDP/DNS are not available)
|
|
|
|
Use Linux VM on Windows::
|
|
|
|
What we can really do is to create a Linux VM with Vagrant (or simply
|
|
Virtualbox if you like). In the Vagrant settings, remember to turn on bridged
|
|
NIC. Then, run sshuttle inside the VM like below::
|
|
|
|
sshuttle -l 0.0.0.0 -x 10.0.0.0/8 -x 192.168.0.0/16 0/0
|
|
|
|
10.0.0.0/8 excludes NAT traffic of Vagrant and 192.168.0.0/16 excludes
|
|
traffic to local area network (assuming that we're using 192.168.0.0 subnet).
|
|
|
|
Assuming the VM has the IP 192.168.1.200 obtained on the bridge NIC (we can
|
|
configure that in Vagrant), we can then ask Windows to route all its traffic
|
|
via the VM by running the following in cmd.exe with admin right::
|
|
|
|
route add 0.0.0.0 mask 0.0.0.0 192.168.1.200
|