while and in fact it is less useful that using the client ttyname. So
don't bother and don't pass it from the client. If we need it in future
it is in c->environ.
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
and in fact it is less useful that using the client ttyname. So don't bother
and don't pass it from the client. If we need it in future it is in c->environ.
rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that created
them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '', do:
bind c neww -c '#{pane_current_path}'
The equivalent of default-path '~' is left as an exercise for the reader.
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
When clearing WINLINK_ALERTFLAGS for all sessions, we must also, for that
window, clear the window->flags as well, otherwise sessions may well still
see flags for winlinks long since cleared.
This therfore introduces WINDOW_ALERTFLAGS to help with this.
the server and fd passing is not necessary. Needs some ifdefs unfortunately but
no way around that and some of them can go next time we're willing to do a
protocol bump. Patch from J Raynor jxraynor at gmail dot com.
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.
Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.
When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.
We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent commands. This
allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time
from it. A command may suspend execution from the queue by returning
CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example
run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited
(unless attaching). A callback is also fired - this is used for nested commands
in, for example, if-shell which can block execution of the client's cmdq until
a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old
curclient/cmdclient distinction - a cmdq is bound to one client (or none if in
the configuration file), this is a command client if c->session is NULL
otherwise an attached client.
- rename client and session to start_client and start_session in
window_choose_data struct. also add TREE_OTHER define and reorder the
struct
- rename window_choose_ctx to window_choose_data_run
- don't pass a cmd_ctx into window_choose_create (will let it use a
different client later). instead take type, session, client
- add window_choose_data_free and use it to dispose of wcd rather than
each cmd-*.c doing it individually
- change so ref counting is done by wcd_add and wcd_free rather than
callers. this means 1 ref for each item but what of it :-)
- also add a ref to tree_session - not sure if this is needed?
- all the callbacks except choose-client and find-window are the same so
remove them and add window_choose_default_callback
- reorder/rename some other bits and pieces for tidyness
Sync from OpenBSD.
* obsd-master:
Add halfpage commands to mode command string table (missed by accident), from Thomas Adam.
Clarify some points about config files, notably that they are only read at server start. From Thomas Adam.
Use a utility function for common code to show errors in config file, from Thomas Adam.
Sync from OpenBSD.
* obsd-master:
Allow session tree (C-b s) to expand and collapse sessions with left/right/space keys. From Thomas Adam.
Remove some out of date text from man page, from Thomas Adam.
Fix up window reference counting and don't crash if the rename timer
fires while the window is dead but still referenced. Fixes problem
reported by Michael Scholz.
Instead of numbering choose mode items 0-9a-z and then nothing, number
them all and if there are more than 10 use a prompt when 0-9 is
pressed. From Thomas Adam.
Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
Provide common helper function for adding windows and sessions to choose
lists and expand %% in command before using it rather than at callback
time. From Thomas Adam.
Add a skeleton mode to tmux (called "control mode") that let's tmux
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
Instead of passing stdin/stdout/stderr file descriptors over imsg and
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.
The tty fd is still passed to the server as before.
This bumps the tmux protocol version so new clients and old servers are
incompatible.
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.
The tty fd is still passed to the server as before.
This bumps the tmux protocol version so new clients and old servers are
incompatible.
Add a flag to move-window to renumber the windows in a session (closing
any gaps) and add an option to do this automatically each time a window
is killed. From Thomas Adam.
Add a simple form of output rate limiting by counting the number of
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
On xterm 271 and later, put the terminal into SCL 5 and use DECCRA for
scrolling the region in panes (if the large region check isn't
hit). With help from Ailin Nemui.
Use a lock file and flock() to serialize server start, avoids problems
when running a bunch of tmux from cron at the same time. Based on a diff
from Tim Ruehsen.
Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
Add move-pane command (like join-pane but allows the same window). Also
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
Provide defined ways to set the various default-path possibilities: ~
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
Drop the ability to have a list of keys in the prefix in favour of two
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise use some platform specific code to retrieve the current working
directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Idea and support code, Linux, Solaris, FreeBSD bits by Romain Francoise,
OpenBSD bits by me.
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise sysctl KERN_PROC_CWD is used to retrieve the current
working directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Support code by Romain Francois, OpenBSD specific bits by me.
Note this requires a recent userland and kernel with KERN_PROC_CWD.
Add initial framework for more powerful formatting of command output and
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
Date: 2011/06/05 11:53:05
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Get rid of the layout string code which tries to walk through the layout
hierarchy and instead just look at what panes are actually in the window.
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
Support setting the xterm clipboard when copying from copy mode using
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
Use the tsl and fsl terminfo(5) capabilities to update terminal title
and automatically fill them in on terminals with the XT capability
(which means their title setting is xterm-compatible). From hsim at
gmx.li.
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
When mode-mouse is on (it is off by default), automatically enter copy
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
|Date: 2011/04/18 20:49:05
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add an option (mouse-select-window) which allows the mouse to be used by
|clicking on the status line, written by hsim at gmx dot li.
|Date: 2011/04/06 22:51:31
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change so that an empty session name always means the current sessions
|even if given with, for example, -t '', and explicitly forbid empty
|session names and those containing a : when they are created.
|Date: 2011/04/05 20:37:01
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add a flag to cmd_find_session so that attach-session can prefer
|unattached sessions when choosing the most recently used (if -t is not
|given). Suggested by claudio@.
|Date: 2011/03/29 20:30:16
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change -t on display-message to be target-pane for the #[A-Z]
|replacements and add -c as target-client.
|Date: 2011/03/27 21:31:25
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Don't include meta twice when working out the flags to output for
|xterm-style keys - bit 3 is accepted on input but not on output. Also a
|style nit in the header.
Date: 2011/03/27 21:27:26
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Give each pane created in a tmux server a unique id (starting from 0),
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
Support passing through escape sequences to the underlying terminal by
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
Simplify the way jobs work and drop the persist type, so all jobs are
fire-and-forget.
Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.
This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
fire-and-forget.
Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.
This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
Move the user-visible parts of all options (names, types, limit, default
values) together into one set of tables in options-table.c. Also clean
up and simplify cmd-set-options.c and move a common print function into
option-table.c.
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Don't reset the activity timer for unattached sessions every second,
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
values) together into one set of tables in options-table.c. Also clean
up and simplify cmd-set-options.c and move a common print function into
option-table.c.
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
Store sessions in an RB tree by name rather than a list, this is tidier
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
Unify the way sessions are used by callbacks - store the address and use
the reference count, then check it is still on the global sessions list
in the callback.
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
Date: 2010/11/22 21:13:13
Author: nicm
Branch: HEAD
Tag: (none)
Log:
There is somewhere that WINDOW_HIDDEN is getting set when it shouldn't
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Members:
resize.c:1.5->1.6
tmux.h:1.246->1.247
tty.c:1.92->1.93
