Commit Graph

439 Commits

Author SHA1 Message Date
Tiago Cunha
c78426f033 Sync OpenBSD patchset 487:
Change declaration and use of malloc_options to be more standard, from Tim van
der Molen.
2009-11-04 22:49:27 +00:00
Nicholas Marriott
ea8c8c5f33 A couple of minor cosmetic changes. 2009-11-04 20:59:22 +00:00
Nicholas Marriott
abf3a5d50e Initial changes to move tmux to libevent.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.

Moving the server stuff over to bufferevents and timers and so on will come
later.
2009-11-04 20:50:11 +00:00
Nicholas Marriott
d2dfbef05a Change declaration and use of malloc_options to be more standard, from Tim van
der Molen.
2009-11-04 12:41:43 +00:00
Tiago Cunha
a5acabd923 Sync OpenBSD patchset 467:
tabs are better; ok nicm
2009-10-28 23:12:38 +00:00
Tiago Cunha
41863470ba Sync OpenBSD patchset 446:
Remove the -d flag to tmux and just use op/AX to detect default colours.

Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.

Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
2009-10-28 22:48:35 +00:00
Theo Deraadt
ed62d1263c tabs are better; ok nicm 2009-10-26 21:42:04 +00:00
Nicholas Marriott
3a7636ff0f Remove the -d flag to tmux and just use op/AX to detect default colours.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.

Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
2009-10-25 21:11:21 +00:00
Tiago Cunha
dbefea339f Sync OpenBSD patchset 436:
Merge prepare_cmd into main as it is short and only called once.
2009-10-23 17:40:23 +00:00
Tiago Cunha
84392ffc0d Sync OpenBSD patchset 433:
Client tidying: get rid of client_ctx struct in favour of two variables in
client.c, and move the functions in client-fn.c into other files.
2009-10-23 17:32:26 +00:00
Nicholas Marriott
eb0c33cba4 Merge prepare_cmd into main as it is short and only called once. 2009-10-22 10:04:07 +00:00
Nicholas Marriott
90ad041fa5 Client tidying: get rid of client_ctx struct in favour of two variables in
client.c, and move the functions in client-fn.c into other files.
2009-10-21 20:11:47 +00:00
Tiago Cunha
ea1721bcb0 Sync OpenBSD patchset 373:
New option, mouse-select-pane. If on, the mouse may be used to select the
current pane.

Suggested by sthen@ and also by someone else ages ago who I have forgotten.
2009-10-11 23:46:02 +00:00
Tiago Cunha
91e4dc83fc Sync OpenBSD patchset 370:
Support for individual session idle time locking. May be enabled by turning off
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.

This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.

Diff/idea largely from Thomas Adam, tweaked by me.
2009-10-11 23:30:28 +00:00
Nicholas Marriott
4658c063d5 New option, mouse-select-pane. If on, the mouse may be used to select the
current pane.

Suggested by sthen@ and also by someone else ages ago who I have forgotten.
2009-10-10 14:51:16 +00:00
Nicholas Marriott
b7d031cc92 Support for individual session idle time locking. May be enabled by turning off
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.

This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.

Diff/idea largely from Thomas Adam, tweaked by me.
2009-10-10 09:46:11 +00:00
Tiago Cunha
9ac062acef Sync OpenBSD patchset 367:
Add a simple synchronize-panes window option: when set, all input to any pane
that is part of the window is also sent to all other panes in the same
window. Suggested by several, most recently Tomasz Pajor.
2009-10-09 13:07:04 +00:00
Nicholas Marriott
3af09ac946 Add a simple synchronize-panes window option: when set, all input to any pane
that is part of the window is also sent to all other panes in the same
window. Suggested by several, most recently Tomasz Pajor.
2009-10-09 07:27:00 +00:00
Tiago Cunha
5be3fb86b9 Sync OpenBSD patchset 350:
Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.

This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
2009-09-23 15:18:56 +00:00
Tiago Cunha
1310ea2729 Sync OpenBSD patchset 347:
Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.

This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.

Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.

This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
2009-09-23 15:00:09 +00:00
Nicholas Marriott
9200a0be7a Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.

This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
2009-09-23 12:03:30 +00:00
Nicholas Marriott
b01dcd7971 Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.

This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.

Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.

This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
2009-09-23 06:18:47 +00:00
Tiago Cunha
df7b68480c Sync OpenBSD patchset 343:
Permit multiple prefix keys to be defined, separated by commas, for example:

set -g prefix ^a,^b

Any key in the list acts as the prefix. The send-prefix command always sends
the first key in the list.
2009-09-22 14:22:21 +00:00
Nicholas Marriott
96dd3e8eb9 Permit multiple prefix keys to be defined, separated by commas, for example:
set -g prefix ^a,^b

Any key in the list acts as the prefix. The send-prefix command always sends
the first key in the list.
2009-09-22 12:38:10 +00:00
Tiago Cunha
23d7ed3187 Sync OpenBSD patchset 331:
New option, set-titles-string, to allow the window title to be specified (as
for status-left/right) if set-titles is on. Also only update the title when the
status line is being redrawn.
2009-09-19 18:53:01 +00:00
Nicholas Marriott
63d499f480 New option, set-titles-string, to allow the window title to be specified (as
for status-left/right) if set-titles is on. Also only update the title when the
status line is being redrawn.
2009-09-18 15:19:27 +00:00
Tiago Cunha
02c4760ace Sync OpenBSD patchset 315:
Tidy main and make it a bit easier to read.
2009-09-04 20:37:40 +00:00
Nicholas Marriott
83af55bed4 Tidy main and make it a bit easier to read. 2009-09-04 15:15:24 +00:00
Tiago Cunha
884ebb6dab Sync OpenBSD patchset 309:
Accept -l to make it easier for people who use tmux as a login shell to use
$SHELL. Originally from martynas@, tweaked by me.
2009-09-03 21:02:55 +00:00
Tiago Cunha
f796336a12 Sync OpenBSD patchset 308:
When incorrect passwords are entered, behave similarly to login(1) and backoff
for a bit. Based on a diff from martynas@.
2009-09-03 20:44:38 +00:00
Nicholas Marriott
74c35c513e Accept -l to make it easier for people who use tmux as a login shell to use
$SHELL. Originally from martynas@, tweaked by me.
2009-09-02 17:34:57 +00:00
Nicholas Marriott
c5ac2579ba When incorrect passwords are entered, behave similarly to login(1) and backoff
for a bit. Based on a diff from martynas@.
2009-09-02 16:38:35 +00:00
Tiago Cunha
a3a150faf2 Sync OpenBSD patchset 305:
When using tmux as a login shell, there is currently no way to specify a shell
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.

The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.

Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
2009-09-02 01:02:44 +00:00
Tiago Cunha
ce5c441f0f Sync OpenBSD patchset 304:
Use "Password:" with no space for password prompts and don't display a *s for
the password, like pretty much everything else. From martynas@ with minor
tweaks by me.
2009-09-02 00:55:49 +00:00
Tiago Cunha
99de03ea32 Sync OpenBSD patchset 303:
Sort cases same as getopt argument, from martynas.
2009-09-02 00:54:00 +00:00
Nicholas Marriott
7d5e494716 When using tmux as a login shell, there is currently no way to specify a shell
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.

The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.

Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
2009-09-01 13:09:49 +00:00
Nicholas Marriott
f8aa5821be Use "Password:" with no space for password prompts and don't display a *s for
the password, like pretty much everything else. From martynas@ with minor
tweaks by me.
2009-09-01 09:11:05 +00:00
Nicholas Marriott
34bb735a65 Sort cases same as getopt argument, from martynas. 2009-09-01 09:00:54 +00:00
Tiago Cunha
ed3535db8a Sync OpenBSD patchset 302:
Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
2009-08-31 22:30:15 +00:00
Nicholas Marriott
04319964b9 Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
2009-08-31 20:46:19 +00:00
Tiago Cunha
d5bc78d98b Sync OpenBSD patchset 292:
Add some other obvious variables to update-environment (WINDOWID SSH_ASKPASS
SSH_AUTH_SOCK SSH_AGENT_PID SSH_CONNECTION) so they are updated in the session
environment on new/attach.
2009-08-24 16:35:24 +00:00
Nicholas Marriott
90400ae96a Add some other obvious variables to update-environment (WINDOWID SSH_ASKPASS
SSH_AUTH_SOCK SSH_AGENT_PID SSH_CONNECTION) so they are updated in the session
environment on new/attach.
2009-08-23 18:21:02 +00:00
Tiago Cunha
9541471f87 Sync OpenBSD patchset 258:
Disable mode-mouse (mouse in copy/choice mode) by default as it isn't very
useful at the moment and causes confusion.
2009-08-16 19:20:37 +00:00
Tiago Cunha
e61ee94e26 Sync OpenBSD patchset 257:
Add a base-index session option to specify the first index checked when looking
for an index for a new window.
2009-08-16 19:16:27 +00:00
Tiago Cunha
06b3f49c49 Sync OpenBSD patchset 249:
When started as the shell, __progname contains a leading -, so hardcode "tmux"
for socket path and log files, and strip it when working out the shell.
2009-08-14 21:28:00 +00:00
Tiago Cunha
a9b6bfdddd Sync OpenBSD patchset 243:
Switch tmux to use imsg. This is the last major change to make the
client-server protocol more resilient and make the protocol versioning work
properly. In future, the only things requiring a protocol version bump will be
changes in the message structs, and (when both client and server have this
change) mixing different versions should nicely report an error message.

As a side effect this also makes the code tidier, fixes a problem with the way
errors reported during server startup were handled, and supports fd passing
(which will be used in future).

Looked over by eric@, thanks.

Please note that mixing a client with this change with an older server or vice
versa may cause tmux to crash or hang - tmux should be completely exited before
upgrading.
2009-08-14 21:04:04 +00:00
Nicholas Marriott
375be90fd1 Disable mode-mouse (mouse in copy/choice mode) by default as it isn't very
useful at the moment and causes confusion.
2009-08-13 21:56:14 +00:00
Nicholas Marriott
3ad4de6c8c Add a base-index session option to specify the first index checked when looking
for an index for a new window.
2009-08-13 20:11:58 +00:00
Nicholas Marriott
9a52ef099a When started as the shell, __progname contains a leading -, so hardcode "tmux"
for socket path and log files, and strip it when working out the shell.
2009-08-12 09:14:25 +00:00
Nicholas Marriott
f0635717b3 Switch tmux to use imsg. This is the last major change to make the
client-server protocol more resilient and make the protocol versioning work
properly. In future, the only things requiring a protocol version bump will be
changes in the message structs, and (when both client and server have this
change) mixing different versions should nicely report an error message.

As a side effect this also makes the code tidier, fixes a problem with the way
errors reported during server startup were handled, and supports fd passing
(which will be used in future).

Looked over by eric@, thanks.

Please note that mixing a client with this change with an older server or vice
versa may cause tmux to crash or hang - tmux should be completely exited before
upgrading.
2009-08-11 17:18:35 +00:00
Tiago Cunha
48ede1a00a Sync OpenBSD patchset 241:
No arguments are the same as new-session and this requires the environment to
be sent, so set that flag too when argc == 0.
2009-08-10 21:43:34 +00:00
Nicholas Marriott
edcb22a6fb No arguments are the same as new-session and this requires the environment to
be sent, so set that flag too when argc == 0.
2009-08-10 20:51:29 +00:00
Tiago Cunha
29b1b2fb5e Sync OpenBSD patchset 231:
Infrastructure and commands to manage the environment for processes started
within tmux.

There is a global environment, copied from the external environment when the
server is started and each session has an (initially empty) session
environment which overrides it.

New commands set-environment and show-environment manipulate or display the
environments.

A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
2009-08-09 17:48:55 +00:00
Tiago Cunha
167a8c9edc Sync OpenBSD patchset 229:
Options to set the colours and attributes for status-left/-right. From Thomas
Adam, thanks.
2009-08-09 17:40:17 +00:00
Tiago Cunha
88b83be07b Sync OpenBSD patchset 220:
If colours are not supported by the terminal, try to emulate a coloured
background by setting or clearing the reverse attribute.

This makes a few applications which don't use the reverse attribute themselves
a little happier, and allows the status, message and mode options to have
default attributes and fg/bg options that work as expected when set as reverse.
2009-08-09 16:50:57 +00:00
Tiago Cunha
c32ca6a8e6 Sync OpenBSD patchset 216:
Check for "UTF8" as well as "UTF-8" in LANG etc as it seems this may also
appear.
2009-08-09 16:39:40 +00:00
Tiago Cunha
15f6a41a75 Sync OpenBSD patchset 211:
Add a terminal-overrides session option allowing individual terminfo(5) entries
to be overridden. The 88col/256col checks are now moved into the default
setting and out of the code.

Also remove a couple of old workarounds for xterm and rxvt which are no longer
necessary (tmux can emulate them if missing).
2009-08-09 15:26:24 +00:00
Nicholas Marriott
6491274f60 Infrastructure and commands to manage the environment for processes started
within tmux.

There is a global environment, copied from the external environment when the
server is started and each sesssion has an (initially empty) session
environment which overrides it.

New commands set-environment and show-environment manipulate or display the
environments.

A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
2009-08-08 21:52:43 +00:00
Nicholas Marriott
90f8151ffd Options to set the colours and attributes for status-left/-right. From Thomas
Adam, thanks.
2009-08-08 20:36:42 +00:00
Nicholas Marriott
bcddddf98d If colours are not supported by the terminal, try to emulate a coloured
background by setting or clearing the reverse attribute.

This makes a few applications which don't use the reverse attribute themselves
a little happier, and allows the status, message and mode options to have
default attributes and fg/bg options that work as expected when set as reverse.
2009-08-05 16:26:38 +00:00
Nicholas Marriott
93bf2a1d72 Check for "UTF8" as well as "UTF-8" in LANG etc as it seems this may also
appear.
2009-08-04 10:31:28 +00:00
Nicholas Marriott
1673735f02 Add a terminal-overrides session option allowing individual terminfo(5) entries
to be overridden. The 88col/256col checks are now moved into the default
setting and out of the code.

Also remove a couple of old workarounds for xterm and rxvt which are no longer
necessary (tmux can emulate them if missing).
2009-08-03 14:10:54 +00:00
Tiago Cunha
ec3dba01b2 Sync OpenBSD patchset 198:
Add a mode-mouse option to prevent tmux taking over the mouse in choice or
copy modes.
2009-07-30 20:32:05 +00:00
Tiago Cunha
6fbfcfc0d7 Sync OpenBSD patchset 196:
Rename struct hdrtype to msgtype which is a better name and can be used even
when struct hdr disappears.
2009-07-30 20:21:55 +00:00
Tiago Cunha
5a9b7b230c Sync OpenBSD patchset 195:
Taking account of the "s, 22 not 24 is the maximum length of #T in
status-right to prevent the date being cut off.
2009-07-30 20:17:25 +00:00
Nicholas Marriott
a419e73f7a Add a mode-mouse option to prevent tmux taking over the mouse in choice or copy
modes.
2009-07-30 07:04:50 +00:00
Nicholas Marriott
c1d6d7ac6b Rename struct hdrtype to msgtype which is a better name and can be used even
when struct hdr disappears.
2009-07-29 14:17:26 +00:00
Nicholas Marriott
d3c461097b Taking account of the "s, 22 not 24 is the maximum length of #T in status-right
to prevent the date being cut off.
2009-07-29 05:36:53 +00:00
Tiago Cunha
d637cb33da Sync OpenBSD patchset 181:
Make all messages sent between the client and server fixed size.

This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-28 22:12:16 +00:00
Nicholas Marriott
34a82e7629 Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-26 12:58:44 +00:00
Tiago Cunha
7174c76bf0 Sync OpenBSD patchset 166:
Pass a set of flags into client_init rather than just a start_server
variable. Only one flag now but more to come later.
2009-07-23 13:15:41 +00:00
Nicholas Marriott
bb14c36a27 Pass a set of flags into client_init rather than just a start_server
variable. Only one flag now but more to come later.
2009-07-22 21:58:56 +00:00
Tiago Cunha
1bf524c1b7 Sync OpenBSD patchset 152:
__progname is not const, pointed out by deraadt.

And, as a consequence change its declaration for operating systems which
don't provide __progname as well.
2009-07-22 16:53:30 +00:00
Tiago Cunha
54c6848d75 Sync OpenBSD patchset 148:
Display the number of failed password attempts (if any) when the server is
locked. From Tom Doherty.
2009-07-20 16:07:23 +00:00
Tiago Cunha
9a07e8f372 Sync OpenBSD patchset 147:
Add a status-justify option to allow the window list in the status line to be
positioned at the left, centre, or right.
2009-07-20 16:01:07 +00:00
Tiago Cunha
e8957009c7 Sync OpenBSD patchset 146:
New options, window-status-current-{fg,bg,attr}, to set the fg, bg and
attributes with which the current window is shown in the status line. From
Johan Friis, thanks.
2009-07-20 15:57:05 +00:00
Nicholas Marriott
54afcfbfb4 Display the number of failed password attempts (if any) when the server is
locked. From Tom Doherty.
2009-07-20 14:37:51 +00:00
Nicholas Marriott
b292f71c49 Add a status-justify option to allow the window list in the status line to be
positioned at the left, centre, or right.
2009-07-20 14:32:09 +00:00
Nicholas Marriott
e32e0d5692 New options, window-status-current-{fg,bg,attr}, to set the fg, bg and
attributes with which the current window is shown in the status line. From
Johan Friis, thanks.
2009-07-20 09:15:18 +00:00
Tiago Cunha
376c808b50 Add three new session options: visual-activity, visual-bell, visual-content.
If these are enabled (and the monitor-activity, bell-action and monitor-content
options are configurated appropriately), when activity, a bell, or content is
detected, a message is shown.

Also tidy up the bell/activity/content code in server.c slightly and fix a
couple of errors.
2009-07-19 14:35:56 +00:00
Nicholas Marriott
fc6a65c620 Add three new session options: visual-activity, visual-bell, visual-content. If
these are enabled (and the monitor-activity, bell-actio and monitor-content
options are configurated appropriately), when activity, a bell, or content is
detected, a message is shown.

Also tidy up the bell/activity/content code in server.c slightly and fix a
couple of errors.
2009-07-18 14:59:25 +00:00
Nicholas Marriott
f1efd6b4e7 If -u is specified or UTF-8 is otherwise detected when the server is started,
enable the utf8 and status-utf8 optons. While here, note in the man page that
the server is started with the first session and exits when none remain.
2009-07-18 11:05:13 +00:00
Nicholas Marriott
7ddba901a4 If -u is specified or UTF-8 is otherwise detected when the server is started,
enable the utf8 and status-utf8 optons. While here, note in the man page that
the server is started with the first session and exits when none remain.
2009-07-17 13:38:03 +00:00
Nicholas Marriott
d7b4aa0ff3 Add a default-terminal option to set the starting value of $TERM in new
windows.
2009-07-12 17:07:58 +00:00
Nicholas Marriott
daa1faa905 Add a default-terminal option to set the starting value of $TERM in new
windows.

This is "screen" by default and must be either that or something closely
related. This does makes it easier to customise it if necessary.
2009-07-10 05:50:54 +00:00
Nicholas Marriott
890db6eaaf Accidently deleted default-command. 2009-07-08 18:12:57 +00:00
Nicholas Marriott
2ddcb51df3 Fix $Id$. 2009-07-08 18:03:03 +00:00
Nicholas Marriott
86504af149 Rename the global options variables to be shorter and to make session options
clear. No functional change, getting this out of the way to make later options
changes easier.
2009-07-08 18:01:31 +00:00
Nicholas Marriott
084d07f4eb Just appending -l to $SHELL to create a login shell is wrong: -l is not POSIX,
and some people may use shells which do not support it. Instead, make an empty
default-command option mean a login shell, and fork it with a - in argv[0]
which is the method used by login(1).

Also fix the automatic-rename code to handle this correctly and to strip a
leading - if present.
2009-07-08 05:26:45 +00:00
Nicholas Marriott
923ccfa2e8 Rename the global options variables to be shorter and to make session options
clear. No functional change, getting this out of the way to make later options
changes easier.
2009-07-07 19:49:19 +00:00
Nicholas Marriott
22d1b9412e Using -l to specify a login shell is non-POSIX and causes problems with shells
that do not support it. Instead, set an empty default-command to invoke $SHELL
with - prefixed to argv[0], and make this the default setting.
2009-07-01 19:42:55 +00:00
Nicholas Marriott
f1463ff3c1 Lose -V. 2009-06-25 16:56:08 +00:00
Nicholas Marriott
a9e3d5c56a More diff-to-OpenBSD reduction. Move a lot of compat stuff into compat.h. 2009-06-25 16:47:00 +00:00
Nicholas Marriott
bb459beb03 Whitespace and more syncing. 2009-06-25 16:34:50 +00:00
Nicholas Marriott
a5830b9603 Restore $Id$ and add script to do so. 2009-06-25 16:21:32 +00:00
Nicholas Marriott
f17a5f1e82 If getcwd() fails, use the user's home directory, or /, instead of failing with
an error.
2009-06-25 16:11:12 +00:00
Nicholas Marriott
f0bcbcfa7f Remove error about using -L and -S together which was never displayed as
logging wasn't yet enabled, was unnecessary, and contradicted the man page
which says using -S will cause -L to be ignored.
2009-06-25 16:09:38 +00:00
Nicholas Marriott
cd5a4f4c35 LC_ALL overrides LC_CTYPE and LANG. Comment was correct but the code
wrong. Pointed out by Hannah Schroeter, thanks.
2009-06-25 16:00:02 +00:00
Nicholas Marriott
6f4600c533 Check the first of LC_CTYPE, LC_ALL and LANG, rather than just the last, when
trying to decide about UTF-8, and use strcasestr. Reported by Geert Hendrickx.
2009-06-25 15:59:27 +00:00
Nicholas Marriott
f90450f854 Zero the password given to -U in the client as well. 2009-06-25 15:56:25 +00:00
Nicholas Marriott
4f2e5f8c50 Do not set the window title by default (make set-titles option default to off),
wiping over the title is rude and annoying.
2009-06-25 15:48:59 +00:00
Nicholas Marriott
28bcf774e5 New session option, status-utf8, to control the interpretation of top-bit-set
characters in status-left and status-right (if on, they are treated as UTF-8;
otherwise passed through).
2009-06-25 15:48:25 +00:00
Nicholas Marriott
94f5ddb60c remove unused flag; while here, make usage's output fit on 80-column displays. 2009-06-25 15:44:44 +00:00
Nicholas Marriott
658659532a Use login shells by default. 2009-06-25 15:44:03 +00:00
Nicholas Marriott
6528d47ed8 Don't leak memory if multiple -f flags are given. From ray 2009-06-25 15:42:35 +00:00
Nicholas Marriott
dbbb297d5f If getcwd() fails, use the user's home directory, or /, instead of failing with
an error.
2009-06-25 06:54:32 +00:00
Nicholas Marriott
40c242a6d5 Remove error about using -L and -S together which was never displayed as
logging wasn't yet enabled, was unnecessary, and contradicted the man page
which says using -S will cause -L to be ignored.
2009-06-25 06:40:25 +00:00
Nicholas Marriott
c2b0fdae5b LC_ALL overrides LC_CTYPE and LANG. Comment was correct but the code
wrong. Pointed out by Hannah Schroeter, thanks.
2009-06-23 18:27:40 +00:00
Nicholas Marriott
18665b8cc9 Check the first of LC_CTYPE, LC_ALL and LANG, rather than just the last, when
trying to decide about UTF-8, and use strcasestr. Reported by Geert Hendrickx.
2009-06-05 07:22:23 +00:00
Nicholas Marriott
38b2c42f63 Zero the password given to -U in the client as well. 2009-06-04 21:56:14 +00:00
Nicholas Marriott
655a1aea6c Do not set the window title by default (make set-titles option default to off),
wiping over the title is rude and annoying. Agreed by several.
2009-06-03 17:04:16 +00:00
Nicholas Marriott
6521427a45 New session option, status-utf8, to control the interpretation of top-bit-set
characters in status-left and status-right (if on, they are treated as UTF-8;
otherwise passed through).
2009-06-03 16:54:26 +00:00
Igor Sobrado
4215d009a5 remove unused flag; while here, make usage's output fit on 80-column displays. 2009-06-02 16:53:20 +00:00
Pierre-Yves Ritschard
dc373abba8 spawn login shells by default, adapt manpage bits as well.
ok nicm@
2009-06-02 15:55:32 +00:00
Ray Lai
df91860b52 Don't leak memory if multiple -f flags are given.
OK nicm@
2009-06-02 10:49:40 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00
Nicholas Marriott
940e2ae1fd endpwent() is not required after getpwuid(). 2009-06-01 20:38:59 +00:00
Nicholas Marriott
cd4566cd69 Spacing. 2009-05-26 18:30:51 +00:00
Nicholas Marriott
5db59a0d20 If LANG contains "UTF-8", assume the terminal supports UTF-8, on the grounds that anyone who configures it probably wants UTF-8. Not certain if this is a perfect idea but let's see if it causes any problems. 2009-05-19 16:03:18 +00:00
Tiago Cunha
80af85a102 - New window option monitor-content to search for a string in a window, and
highlight the status line if it matches.
- To make this possible, the function cmd_find_window_search from
  cmd-find-window.c had to be moved to window.c and renamed window_pane_search.
- While there use three new functions in server.c to check for bell, activity,
  and content, to avoid too much nesting.
2009-05-19 13:32:55 +00:00
Nicholas Marriott
72e464fa04 main-horizontal layout and main-pane-height option to match vertical. 2009-05-18 22:17:24 +00:00
Nicholas Marriott
6e4b947d71 New option main-pane-width to set width of pane in left-vertical mode. 2009-05-18 21:55:53 +00:00
Nicholas Marriott
03af7c99b5 Recreate server socket on SIGUSR1, per SF feature request 2792533. 2009-05-16 10:02:51 +00:00
Nicholas Marriott
c8cf438d44 Rename all feature flags to HAVE_* and move out of makefiles into a configure
script which must be run before building.

Still two makefiles but they are a hell of a lot simpler.

HAVE_* also will make it easier to move to $buildsystem if necessary later.
2009-05-13 23:27:00 +00:00
Nicholas Marriott
88daeb5410 Bye-bye META. 2009-05-13 22:10:39 +00:00
Nicholas Marriott
143aa718e5 Space trimmage mega-diff. 2009-05-04 17:58:27 +00:00
Nicholas Marriott
f9af6f7f8c Document -L and -8, fix synopsis. 2009-04-20 19:25:58 +00:00
Nicholas Marriott
3932da2522 Better errno, from joshe. 2009-04-01 20:15:48 +00:00
Nicholas Marriott
b6450b167b Basic horizontal splitting and layout management. Still some redraw and other
issues - particularly, don't mix with manual pane resizing and be careful when
viewing from multiple clients; generally cycling the layout a few times will
fix most problems. Getting this in for testing while I think about how to deal
with manual mode.

Split window as normal and cycle the layouts with C-b space. Some of the
layouts will work better when swap-pane comes along.
2009-04-01 18:21:42 +00:00
Nicholas Marriott
be0c79f3ad Sockets in /tmp are now created in a subdirectory named, tmux-UID, eg
tmux-1000. The default socket is thus /tmp/tmux-UID/default. To start a
separate server, the new -L command line option should be used: this creates a
socket in the same directory with a different name ("-L main" will create
socket called "main"). -S should only be used to place the socket outside
/tmp. This makes sockets a little more secure and a bit more convenient to use
multiple servers.
2009-03-27 15:57:10 +00:00
Nicholas Marriott
f5f04a9344 * New session flag "set-remain-on-exit" to set remain-on-exit flag for new windows created in that session (like "remain-by-default" used to do). Not perfectly happy about this, but until I can think of a good way to introduce it generically (maybe a set of options in the session) this will do. Fixes SF request 2527847. 2009-03-21 12:44:06 +00:00
Nicholas Marriott
e6d35b6aa4 Support for 88 colour terminals. 2009-03-07 10:29:06 +00:00
Nicholas Marriott
95c8c049f5 Redo mode keys slightly more cleanly and apply them to command prompt editing. vi or emacs mode is controlled by the session option status-keys. 2009-02-13 21:39:45 +00:00
Nicholas Marriott
b235815831 Don't close fds, so error message appears. 2009-02-08 16:26:43 +00:00
Nicholas Marriott
62d2ab3e68 Continue process if suspended. 2009-02-08 16:11:26 +00:00
Nicholas Marriott
882316ad6a Set colour of window entry in status line based on window options. 2009-01-30 00:24:49 +00:00
Nicholas Marriott
c6bd9e2063 Allow status, mode and message attributes to be changed by three new options: status-attr, mode-attr, message-attr. A comma-separataed list is accepted containing: bright, dim, underscore, blink, reverse, hidden, italics, for example: set -g status-attr bright,blink
From Josh Elsasser, thanks!
2009-01-27 20:22:33 +00:00
Nicholas Marriott
3f171917f6 Return 1 on error. Doh. 2009-01-23 16:19:56 +00:00
Nicholas Marriott
392e135349 Handle SIGTERM (and kill-server which uses it), a bit more neatly - tidy up
properly and print a nicer message. Same effect though :-)
2009-01-21 22:47:31 +00:00
Nicholas Marriott
2d15f59859 Try to change the window title to match the command running it in. This is done
by reading argv[0] from the process group leader of the group that owns the tty
(tcgetpgrp()). This can't be done portably so some OS-dependent code is
introduced (ugh); OpenBSD, FreeBSD and Linux are supported at the moment.

A new window flag, automatic-rename, is available: if this is set to off, the
window name is not changed. Specifying a name with the new-window, new-session
or rename-window commands will automatically set this flag to off for the
window in question. To disable it entirely set the option to off globally (setw
-g automatic-rename off).
2009-01-20 19:35:03 +00:00
Nicholas Marriott
93230a64bc Pass return code from _exec; allow command sequences to work from the command line. 2009-01-19 18:23:40 +00:00
Nicholas Marriott
8ea49712fd suspend-client command and suspend client when ^Z key binding is used. 2009-01-18 12:09:42 +00:00
Nicholas Marriott
5aa3098bb6 Support #S #H in status-left/right. 2009-01-15 23:42:21 +00:00
Nicholas Marriott
97fef895f2 Rework the prefix-time stuff. The option is now call repeat-time and defaults to 500 ms. However, it only applies to a small subset of commands, currently: up-pane, down-pane, next-window, previous-window, resize-pane-up, resize-pane-down. These are the commands for which it is obviously useful, having it for everything else was just bloody annoying. 2009-01-14 22:13:30 +00:00
Nicholas Marriott
bc56751692 Disable lock-after-time by default. 2009-01-14 18:41:55 +00:00
Nicholas Marriott
78f7e6d127 Turn off prefix-time for the moment, it is too annoying. 2009-01-13 06:52:12 +00:00
Nicholas Marriott
60bfaf5bae prefix-time option to allow multiple commands without additional prefixes. 2009-01-12 23:37:02 +00:00
Nicholas Marriott
e3feb067a5 Server locking. set-password and lock-server commands, plus automatic locking. 2009-01-11 00:48:42 +00:00
Nicholas Marriott
4d71164826 Pick up cwd from environment,. 2009-01-10 19:37:35 +00:00
Nicholas Marriott
88ab74ac20 Clock mode. 2009-01-10 19:35:40 +00:00
Nicholas Marriott
fd05d07c2b Change server-info format. 2009-01-10 14:43:43 +00:00
Nicholas Marriott
a1b43faa43 Trim spaces. 2009-01-10 01:51:22 +00:00
Nicholas Marriott
fb6c8ecae6 New command, server-info, to show server info + terminal details. Also tweak term stuff a bit. 2009-01-10 01:30:38 +00:00
Nicholas Marriott
3ed5aa3e72 Build array of codes, stop using ncurses global variables and push ncurses crap into tty-term.c. 2009-01-09 23:57:42 +00:00
Nicholas Marriott
ed1031b358 Update key handling code. Simplify, support ctrl properly and add a new window option (xterm-keys) to output xterm key codes including ctrl and, if available, alt and shift. 2009-01-09 16:45:58 +00:00
Nicholas Marriott
5c3d973a4a Import OpenBSD's getopt(3) to workaround broken glibc version. 2008-12-10 20:25:42 +00:00
Nicholas Marriott
7a82e86827 Make window options work the same was as session options, add mode-fg/mode-bg options, force -g for global on set/show/setw/showw/ 2008-12-08 16:19:51 +00:00
Nicholas Marriott
d0342f4a04 Ability to show window title on status line. 2008-12-05 20:04:06 +00:00
Nicholas Marriott
8f163b8caa Support dfly, from joshe. 2008-11-27 18:55:47 +00:00
Nicholas Marriott
5ca710d9e3 Disable UTF-8 by default and add options to enable it. 2008-11-16 13:28:59 +00:00
Nicholas Marriott
9e57336786 Style tweaks. 2008-09-29 16:03:27 +00:00
Nicholas Marriott
62457bce0b Trim. 2008-09-26 06:45:28 +00:00
Nicholas Marriott
df2b3bcf44 Fix stupid GNU getopt behaviour. 2008-09-25 23:28:15 +00:00
Nicholas Marriott
efe557313a Internal screen data rewrite for better 256 colour/UTF-8 support. 2008-09-25 20:08:57 +00:00
Nicholas Marriott
19a2c87f04 Initial UTF-8 support. 2008-09-09 22:16:37 +00:00
Nicholas Marriott
33aa931541 Support OS X by moving to gettimeofday(2) and adding poll compat from OpenSSH. 2008-08-28 17:45:30 +00:00
Nicholas Marriott
8ed403e309 Tidy logging and lose stdout hacks for _info. 2008-08-08 17:35:42 +00:00
Nicholas Marriott
892d1b534e Split emacs/vi keys into seperate tables. 2008-07-02 21:22:57 +00:00
Nicholas Marriott
b881ff91f2 Sync use from priteau. 2008-06-29 21:03:57 +00:00
Nicholas Marriott
d90d646ca8 Zombie windows, requested by Will Maier. 2008-06-29 07:04:31 +00:00
Nicholas Marriott
b69f4a3312 Split internal status-colour into status-fg/status-bg options and lose workarounds in set-option stuff. 2008-06-23 22:12:29 +00:00
Nicholas Marriott
91f3165b2d IRIX fixes thanks to Elias Pipping. 2008-06-23 16:58:49 +00:00
Nicholas Marriott
c24d849fa4 Split options into a table to allow abbreviations. 2008-06-23 07:41:21 +00:00
Nicholas Marriott
3128de3f19 buffer-limit option. 2008-06-20 18:45:35 +00:00
Nicholas Marriott
4e4f71febb Swap in new paste buffer code and add a couple more commands. 2008-06-20 17:31:48 +00:00
Nicholas Marriott
a1db273dc2 display-time option to set message display time. 2008-06-19 23:20:45 +00:00
Nicholas Marriott
73d1558ed0 status-lines -> status, prefix-key -> prefix 2008-06-19 22:04:02 +00:00
Nicholas Marriott
c3b7a49cc1 Editable prompt. Not used for anything yet. More to come. 2008-06-19 19:40:35 +00:00
Nicholas Marriott
99df48d70f Trimify. 2008-06-18 22:21:51 +00:00
Nicholas Marriott
be53d7f298 More Sun OS crap. 2008-06-18 20:11:25 +00:00
Nicholas Marriott
19b7946a85 Start of Solaris port. 2008-06-18 19:34:50 +00:00
Nicholas Marriott
8873c79cbc Set window title to current session. New options set-titles to disable. 2008-06-18 18:52:44 +00:00
Nicholas Marriott
6c23e89f48 Sort options from Pierre Riteau. 2008-06-18 16:39:15 +00:00
Nicholas Marriott
55d5b83408 Informational messages on window option changes. 2008-06-16 17:35:40 +00:00
Nicholas Marriott
557b6b86b0 Add a couple of extra option types, and implement show-options command. 2008-06-15 08:01:54 +00:00
Nicholas Marriott
6a187bb8d3 Some Linux fixes; some code tidying. Don't redraw status bar so often. 2008-06-06 17:20:30 +00:00
Nicholas Marriott
642c0b00ab Easy bits of arg printing for list-keys. 2008-06-05 16:35:32 +00:00
Nicholas Marriott
811e75da52 Status bar left and right strings (set with status-left and status-right), and automatic update (at interval set by status-interval). 2008-06-04 05:40:35 +00:00
Nicholas Marriott
9e6090a7a2 Per-session configuration options. 2008-06-03 21:42:37 +00:00
Nicholas Marriott
73c9b25d2d It is too easy to create things in the same second; use a timespec instead. 2008-06-03 18:13:54 +00:00
Nicholas Marriott
f91e7bfd38 If no command is specified, assume new-session. 2008-06-03 05:35:51 +00:00
Nicholas Marriott
a26f58c7c3 Last bits of basic configuration file. By default in ~/.tmux.conf or specified with -f. Just a list of tmux commands executed when the server is started and before and any session/window is created. 2008-06-02 21:08:36 +00:00
Nicholas Marriott
c7243b73cb Move -s and -c down a level so handling them is the responsibility of the command (with some helper functions), rather than the top-level. This changes the action command syntax so that -s and -c must be after the command rather than before. 2008-06-02 18:08:17 +00:00
Nicholas Marriott
2bc8108b3e Save term data in a linked list and reuse it. 2007-12-06 18:28:55 +00:00
Nicholas Marriott
103748d6ad Major reorganisation of screen handling. 2007-12-06 09:46:23 +00:00
Nicholas Marriott
8da0b1fb99 Mostly-complete copy and paste. 2007-11-23 17:52:54 +00:00
Nicholas Marriott
9c584432d0 history-limit option. 2007-11-23 12:48:20 +00:00
Nicholas Marriott
da21ac965d Work around Linux realpath breakage. 2007-11-20 12:59:27 +00:00
Nicholas Marriott
b359f9b594 Add -c option to specify client, and move detach/refresh to client rather than session. 2007-11-16 21:12:31 +00:00
Nicholas Marriott
4309d65475 realpath the socket path; also sprinkle some const. 2007-11-12 15:12:08 +00:00
Nicholas Marriott
0b832ea466 -V option to show tmux version. 2007-11-09 11:03:35 +00:00
Nicholas Marriott
1f10f6ea8b Close memory leaks. 2007-10-24 11:42:03 +00:00
Nicholas Marriott
f941d270ca Save/restore errno, free pfd buffer. 2007-10-24 11:21:29 +00:00
Nicholas Marriott
688a487570 Lift last MAXNAMELEN limit on -s argument. 2007-10-23 10:48:23 +00:00
Nicholas Marriott
f2f1b8fc81 Add default-command option and change default to be $SHELL rather than $SHELL -l. Also try to read shell from passwd db if $SHELL isn't present. 2007-10-20 09:57:08 +00:00
Nicholas Marriott
97e8b94ef8 cctx should be 0. 2007-10-19 21:58:17 +00:00
Nicholas Marriott
de24fbb35c Add a bell-action option. 2007-10-19 10:21:36 +00:00
Nicholas Marriott
d4330f57c0 Init signals here to pick up zombie. 2007-10-12 17:52:41 +00:00
Nicholas Marriott
37f17a7e5b Warn and bork on nested sessions ($TMUX exists). 2007-10-12 14:46:48 +00:00
Nicholas Marriott
7ec5be30df set status, status-fg, status-bg. 2007-10-12 12:08:51 +00:00
Nicholas Marriott
68a5d5c00b Window attachment, malloc debugging, fix a segfault with no sessions. 2007-10-04 11:52:03 +00:00
Nicholas Marriott
ff56ed7bd6 Nuke ?. 2007-10-04 11:23:17 +00:00
Nicholas Marriott
c3e049c5a9 Tweak error msgs. 2007-10-03 22:32:24 +00:00
Nicholas Marriott
001e2d1947 __progname in error msg. 2007-10-03 21:39:16 +00:00
Nicholas Marriott
df716ecc8f Rewrite command handling to be more generic. Not finished! 2007-10-03 21:31:07 +00:00
Nicholas Marriott
ab6170d6bf Use exec on default shell command. 2007-10-03 12:56:02 +00:00
Nicholas Marriott
aaa98ab4a2 Rename some bits. 2007-10-03 12:43:47 +00:00
Nicholas Marriott
fe06744d66 String/number arguments.. 2007-10-03 12:34:16 +00:00
Nicholas Marriott
dadc56d754 Key binding, unbinding. 2007-10-03 11:26:34 +00:00
Nicholas Marriott
7ccdbf392d Sprinkle some const. 2007-10-03 09:17:00 +00:00
Nicholas Marriott
91eb9206d0 Warn on ambiguous commands. 2007-10-02 17:35:00 +00:00
Nicholas Marriott
bfccbc67d1 Simple status line. 2007-10-01 14:53:29 +00:00
Maximilian Gass
d2e035f892 Added window renaming support (tmux rename) 2007-09-28 21:41:52 +00:00
Nicholas Marriott
a73deec89d Erm, check the right length for short cmds. 2007-09-27 20:54:43 +00:00
Nicholas Marriott
58affec94c Split list into ls/lsw. 2007-09-27 10:09:37 +00:00
Nicholas Marriott
3fa8f16364 Adjust $TMUX environ var to include session index, and don't compact session list on release. Also fix some argument types. 2007-09-27 09:15:58 +00:00
Nicholas Marriott
187648e8d1 -S for socket, -s for session. 2007-09-26 19:38:42 +00:00
Nicholas Marriott
2a3e209cce Extend op string and add potential for a single alias. 2007-09-26 19:09:30 +00:00
Nicholas Marriott
8d01984182 Restore list command. 2007-09-26 18:32:17 +00:00
Nicholas Marriott
65eeb7e421 Restore -n, now after the command. 2007-09-26 14:08:16 +00:00
Nicholas Marriott
fb39b22a2e Cleanup part II: split up client stuff and ops. More to come. 2007-09-26 13:43:15 +00:00
Nicholas Marriott
24b978adb7 Don't resize unless size changed. 2007-09-21 18:00:58 +00:00
Nicholas Marriott
2cd99f0ebb Reset ignored signals after forkpty. 2007-09-20 09:43:33 +00:00
Nicholas Marriott
3846c9b9a8 Set up signal handlers before fork so server has them too. 2007-08-28 09:36:33 +00:00
Nicholas Marriott
38b752c1d8 Remove old sockets after error. 2007-08-28 08:30:36 +00:00
Nicholas Marriott
8dbccbc4db Consistent error message. 2007-08-27 13:53:55 +00:00
Nicholas Marriott
04f4e4219b Change command format. 2007-08-27 13:45:26 +00:00
Nicholas Marriott
4b62b1d16c Sync with fdm. 2007-07-25 23:13:18 +00:00
Nicholas Marriott
a41ece5ff0 Initial import to CVS. Basic functions are working, albeit with a couple of showstopper memory bugs and many missing features. Detaching, reattaching, creating new sessions, listing sessions work acceptably for using with shells. Simple curses programs (top, systat, tetris) and more complicated ones (mutt, emacs) that don't require scrolling regions (ESC[r) mostly work fine (including mutt, emacs). No status bar yet and no key remapping or other customisation. 2007-07-09 19:04:12 +00:00