Emulate the ri (reverse index) capability: this allows tmux to at least start
on Sun consoles (TERM=sun or sun-color), even if there appear to still be
problems on some boxes (my Blade 100 is fine but edd's Blade 1000 shows odd
screen corruption).
Clear to the end of the screen from the right starting point when drawing
line-by-line (in panes or if ed not supported). Fixes problem spotted by Frank
Terbeck.
Switch tty key input over to happen on a read event. This is a bit more
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
Setting SGR0 when setting the fg and bg has problems if only one of the two is
meant to be default, so rewrite the code to move this outside, move setting
colours before attributes and generally clean up.
Tested by sthen@, fixes problems he was seeing with mutt and should fix some
existing problems with (rarely) lost attributes.
Remove the -d flag to tmux and just use op/AX to detect default colours.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.
Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
Don't redraw the scroll region on linefeed/reverse index unless it is necessary
(the cursor is at the bottom/top). Should fix slow cursor movement when using
vi in a pane spotted by pirofti@.
Some terminals don't correctly clear their let's-wrap flag after changing the
scroll region (which moves the cursor to 0,0). This means that if the cursor
was at the edge of the screen, any further output after scroll region change
incorrectly causes a line wrap. Add a workaround to move the cursor to position
0 if it is at the screen edge before changing scroll region.
Try to reduce the UTF-8 mess.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.
Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
UTF-8 combined character fixes.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.
Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
Move the check for whether to force a line wrapper lower down into the tty code
where it has access to the tty width, which is what should have been checked.
Instead of having a complicated check to see if the cursor is in the last
position to avoid an explicit wrap, actually move it there.
Some UTF-8 fixes to come.
When checking whether the region will scroll and the cursor position is thus
unsuitable for using CUD/CUU, check the current cursor position not the target
position.
When drawing lines that have wrapped naturally, don't force a newline but
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.
This was another long-standing issue raised by several people over the last
while.
Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
Don't run through the column unchanged case if the row was unchanged but there
were no suitable optimisations, instead make it an else to fall through to
absolute addressing.
Use relative cursor movement instead of absolute when possible and when
supported by the terminal to reduce the size of the output data (generally
about 10-20%).
Like linefeed, don't set the scroll region for reverse index unless it will be
needed.
While here, also tidy up a couple of long lines and remove an extraneous blank.
Be less aggressive about turning the cursor off, only explicitly turn it off
when tmux is redrawing, otherwise leave in the state set by the application.
Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.
This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.
This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.
Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.
This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
Trim some code by moving the ioctl(TIOCGWINSZ) after SIGWINCH from the client
into the server.
This is another (the second of four) protocol version changes coming this
morning, so again the server should be killed before upgrading.
Don't attempt to open() the tty path, rely on the client sending its stdin fd
with imsg and fatal if it doesn't, then set the FD_CLOEXEC flag in tty_init
instead of tty_open to prevent them leaking into child processes if any are
created between the two calls.
This bumps the protocol version, so the tmux server should be killed before
upgrading.
Be more careful about what flags are cleared when opening the terminal,
otherwise the opened/started flags are cleared and the terminal never released.
Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
Send SGR0 when initialising the screen. Fixes problems on terminals with BCE
(like putty) if the background colours is non-default when tmux starts. May
also fix problems when resuming a suspended tmux.
A tty context must not be modified as it may be reused to update multiple
clients, so make it const.
Also fix an actual modification which caused a hang when a session was
connected to multiple terminals at least one of which was missing ich/ich1.
Initialise log_fd to -1, prevents spurious disconnection of the client when it
ends up as fd 0 (likely if the server is started with "tmux start").
Also add some extra debugging messages to server.c.
Have the client pass its stdin fd to the server when identifying itself and
have the server use that rather than reopening the tty. If the fd isn't given,
use the old behaviour (so no need for a version change).
This allows tmux to be used as the shell, so also change so that when working
out the command to execute if default-command is empty (the default), tmux will
try not execute itself.
