Infrastructure and commands to manage the environment for processes started
within tmux.
There is a global environment, copied from the external environment when the
server is started and each session has an (initially empty) session
environment which overrides it.
New commands set-environment and show-environment manipulate or display the
environments.
A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
If there is an error in the configuration file, don't just exit(1) as this can
cause the client to hang. Instead, send the error message, then mark the client
as bad and start a normal shutdown so the server exits once the error is
written.
This also allows some code duplicating daemon(3) to be trimmed and logging to
begin earlier.
Prompted by Theo noticing the behaviour on error wasn't documented.
within tmux.
There is a global environment, copied from the external environment when the
server is started and each sesssion has an (initially empty) session
environment which overrides it.
New commands set-environment and show-environment manipulate or display the
environments.
A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
cause the client to hang. Instead, send the error message, then mark the client
as bad and start a normal shutdown so the server exits once the error is
written.
This also allows some code duplicating daemon(3) to be trimmed and logging to
begin earlier.
Prompted by Theo noticing the behaviour on error wasn't documented.
to be overridden. The 88col/256col checks are now moved into the default
setting and out of the code.
Also remove a couple of old workarounds for xterm and rxvt which are no longer
necessary (tmux can emulate them if missing).
Merge pane number into the target specification for pane commands. Instead of
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.
As a side-effect this now means that swap-pane can swap panes between
different windows.
Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.
As a side-effect this now means that swap-pane can swap panes between different
windows.
Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
Next step towards customisable mode keys: build each default table of keys
into a named tree on start and use that for lookups. Also add command to string
translation tables and modify list-keys to show the mode key bindings (new
-t argument).
a named tree on start and use that for lookups. Also add command to string
translation tables and modify list-keys to show the the mode key bindings (new
-t argument).
Permit commands to be bound to key presses without the prefix key first. The
new -n flag to bind-key and unbind-key sets or removes these bindings, and
list-key shows them in []s.
up-pane and down-pane no longer auto-repeat; update the description of
repeat-time accordingly. ok nicm@
if you prefer old behaviour;
bind -r Up up-pane
bind -r Down down-pane
Tidy the target parsing code a bit and correct the behaviour so that as before
a string with no colon as a target window is first looked up as a window then
as a session, noted by Iain Morgan.
Also attempt to clarify the description of the target specification in the man
page.
a string with no colon as a target window is first looked up as a window then
as a session, noted by Iain Morgan.
Also attempt to clarify the description of the target specification in the man
page.
New options, window-status-current-{fg,bg,attr}, to set the fg, bg and
attributes with which the current window is shown in the status line. From
Johan Friis, thanks.
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.
The major functional changes are:
- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
panes, rather than being fixed and reapplied when the window is resized or
panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
(but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
if possible.
Thanks to all who tested.
If these are enabled (and the monitor-activity, bell-action and monitor-content
options are configurated appropriately), when activity, a bell, or content is
detected, a message is shown.
Also tidy up the bell/activity/content code in server.c slightly and fix a
couple of errors.
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.
The major functional changes are:
- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
panes, rather than being fixed and reapplied when the window is resized or
panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
(but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
if possible.
Thanks to all who tested.
these are enabled (and the monitor-activity, bell-actio and monitor-content
options are configurated appropriately), when activity, a bell, or content is
detected, a message is shown.
Also tidy up the bell/activity/content code in server.c slightly and fix a
couple of errors.
status line (bound to "i" and displays the current window and time by
default). The same substitutions are applied as for status-left/right.
- Add support for including the window index (#I), pane index (#P) and window
name (#W) in the message, and status-left or status-right.
- Bump protocol version.
From Tiago Cunha, thanks!
status line (bound to "i" by default).
- Add support for including the window index, pane index, and window name
in status-left, or status-right.
- Bump protocol version.
- move the code back into cmd.c and merge with the existing functions where
possible;
- accept "-tttyp0" as well as "-t/dev/ttyp0" for clients;
- when looking up session names, try an exact match first, and if that fails
look for it as an fnmatch pattern and then as the start of a name - if more
that one session matches an error is given; so if there is one session called
"mysession", -tmysession, -tmysess, -tmysess* are equivalent but if there
is also "mysession2", the last two are errors;
- similarly for windows, if the argument is not a valid index or exact window
name match, try it against the window names as an fnmatch pattern and a
prefix.
- move the code back into cmd.c and merge with the existing functions where
possible;
- accept "-tttyp0" as well as "-t/dev/ttyp0" for clients;
- when looking up session names, try an exact match first, and if that fails
look for it as an fnmatch pattern and then as the start of a name - if more
that one session matches an error is given; so if there is one session called
"mysession", -tmysession, -tmysess, -tmysess* are equivalent but if there
is also "mysession2", the last two are errors;
- similarly for windows, if the argument is not a valid index or exact window
name match, try it against the window names as an fnmatch pattern and a
prefix.
and makes emacs happy when pasting into some modes. A new -r (raw) flag to
paste-buffer pastes without the translation.
From Kalle Olavi Niemitalo, thanks!
and makes emacs happy when pasting into some modes. A new -r (raw) flag to
paste-buffer pastes without the translation.
From Kalle Olavi Niemitalo, thanks!
argument if the shell command in the first succeeds, for example:
if "[ -e ~/.tmux.conf.alt ]" "source .tmux.conf.alt"
Written by Tiago Cunha, many thanks.
argument if the shell command in the first succeeds, for example:
if "[ -e ~/.tmux.conf.alt ]" "source .tmux.conf.alt"
Written by Tiago Cunha, many thanks.
and some people may use shells which do not support it. Instead, make an empty
default-command option mean a login shell, and fork it with a - in argv[0]
which is the method used by login(1).
Also fix the automatic-rename code to handle this correctly and to strip a
leading - if present.
compatibility, *s are implicitly added at the start and end of the pattern.
Also display the line number and the entire line in the results, and lose the
nasty section_string function and the now empty util.c file.
Initially from Tiago Cunha.
- SIGUSR1 recreates the socket;
- guesswork to work out if the terminal supports UTF-8;
- a paste key for the command prompt;
- main-horizontal layout to match main-vertical, and options to configure the
size of the large pane;
- clear-history command;
- select-layout command.
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
highlight the status line if it matches.
- To make this possible, the function cmd_find_window_search from
cmd-find-window.c had to be moved to window.c and renamed window_pane_search.
- While there use three new functions in server.c to check for bell, activity,
and content, to avoid too much nesting.
