directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.
As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
1. In vi mode the selection doesn't include the last character if you
moved the cursor up or left.
2. In emacs mode the selection includes the last character if you moved
the cursor to the left.
From Balazs Kezes.
entry:
F13-F24 are S-F1 to S-F12
F25-F36 are C-F1 to C-F12
F37-F48 are C-S-F1 to C-S-F12
F49-F60 are M-F1 to M-F12
and F61-F63 are M-S-F1 to M-S-F3
This should be no difference for applications inside tmux, but means
that any key binding for F13 will need to be replaced by S-F1 and so on.
split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
much as before - buffers are automatically named "buffer0000",
"buffer0001" and so on and ordered as a stack. Buffers can be named
explicitly when creating ("loadb -b foo" etc) or renamed ("setb -b
buffer0000 -n foo"). If buffers are named explicitly, they are not
deleted when buffer-limit is reached. Diff from J Raynor.
irritating flaws:
a) The old way of always using the top or left if the choice is
ambiguous is annoying when the layout is unbalanced.
b) The new way of remembering the last used pane is annoying if the
layout is balanced and the leftmost is obvious to the user (because
clearly if we go right from the top-left in a tiled set of four we want
to end up in top-right, even if we were last using the bottom-right).
So instead, use a combination of both: if there is only one possible
pane alongside the current pane, move to it, otherwise choose the most
recently used of the choice.
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
store it in struct mouse_event, reduce the scroll size the 3 but allow
shift to reduce it to 1 and meta and ctrl to multiply by 3 if the
terminal supports them, also support wheel in choose mode. From Marcel
Partap.
options with a single foo-style option. For example:
set -g status-fg yellow
set -g status-bg red
set -g status-attr blink
Becomes:
set -g status-style fg=yellow,bg=red,blink
The -a flag to set can be used to add to rather than replace a style. So:
set -g status-bg red
Becomes:
set -ag status-style bg=red
Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.
From Tiago Cunha.
while and in fact it is less useful that using the client ttyname. So
don't bother and don't pass it from the client. If we need it in future
it is in c->environ.
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
and in fact it is less useful that using the client ttyname. So don't bother
and don't pass it from the client. If we need it in future it is in c->environ.
rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that created
them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '', do:
bind c neww -c '#{pane_current_path}'
The equivalent of default-path '~' is left as an exercise for the reader.
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
When clearing WINLINK_ALERTFLAGS for all sessions, we must also, for that
window, clear the window->flags as well, otherwise sessions may well still
see flags for winlinks long since cleared.
This therfore introduces WINDOW_ALERTFLAGS to help with this.
the server and fd passing is not necessary. Needs some ifdefs unfortunately but
no way around that and some of them can go next time we're willing to do a
protocol bump. Patch from J Raynor jxraynor at gmail dot com.
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.
Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.
When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.
We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent commands. This
allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time
from it. A command may suspend execution from the queue by returning
CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example
run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited
(unless attaching). A callback is also fired - this is used for nested commands
in, for example, if-shell which can block execution of the client's cmdq until
a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old
curclient/cmdclient distinction - a cmdq is bound to one client (or none if in
the configuration file), this is a command client if c->session is NULL
otherwise an attached client.
- rename client and session to start_client and start_session in
window_choose_data struct. also add TREE_OTHER define and reorder the
struct
- rename window_choose_ctx to window_choose_data_run
- don't pass a cmd_ctx into window_choose_create (will let it use a
different client later). instead take type, session, client
- add window_choose_data_free and use it to dispose of wcd rather than
each cmd-*.c doing it individually
- change so ref counting is done by wcd_add and wcd_free rather than
callers. this means 1 ref for each item but what of it :-)
- also add a ref to tree_session - not sure if this is needed?
- all the callbacks except choose-client and find-window are the same so
remove them and add window_choose_default_callback
- reorder/rename some other bits and pieces for tidyness
Sync from OpenBSD.
* obsd-master:
Add halfpage commands to mode command string table (missed by accident), from Thomas Adam.
Clarify some points about config files, notably that they are only read at server start. From Thomas Adam.
Use a utility function for common code to show errors in config file, from Thomas Adam.
Sync from OpenBSD.
* obsd-master:
Allow session tree (C-b s) to expand and collapse sessions with left/right/space keys. From Thomas Adam.
Remove some out of date text from man page, from Thomas Adam.
