zrepl/endpoint/endpoint.go

1107 lines
37 KiB
Go
Raw Normal View History

2018-08-22 00:52:46 +02:00
// Package endpoint implements replication endpoints for use with package replication.
package endpoint
import (
"bytes"
"context"
"fmt"
"io"
"path"
fix handling of tenative cursor presence if protection strategy doesn't use it (#714) Before this PR, we would panic in the `check` phase of `endpoint.Send()`'s `TryBatchDestroy` call in the following cases: the current protection strategy does NOT produce a tentative replication cursor AND * `FromVersion` is a tentative cursor bookmark * `FromVersion` is a snapshot, and there exists a tentative cursor bookmark for that snapshot * `FromVersion` is a bookmark != tentative cursor bookmark, but there exists a tentative cursor bookmark for the same snapshot as the `FromVersion` bookmark In those cases, the `check` concluded that we would delete `FromVersion`. It came to that conclusion because the tentative cursor isn't part of `obsoleteAbs` if the protection strategy doesn't produce a tentative replication cursor. The scenarios above can happen if the user changes the protection strategy from "with tentative cursor" to one "without tentative replication cursor", while there is a tentative replication cursor on disk. The workaround was to rename the tentative cursor. In all cases above, `TryBatchDestroy` would have destroyed the tentative cursor. In case 1, that would fail the `Send` step and potentially break replication if the cursor is the last common bookmark. The `check` conclusion was correct. In cases 2 and 3, deleting the tentative cursor would have been fine because `FromVersion` was a different entity than the tentative cursor. So, destroying the tentative cursor would be the right call. The solution in this PR is as follows: * add the `FromVersion` to the `liveAbs` set of live abstractions * rewrite the `check` closure to use the full dataset path (`fullpath`) to identify the concrete ZFS object instead of the `zfs.FilesystemVersionEqualIdentity`, which is only identified by matching GUID. * Holds have no dataset path and are not the `FromVersion` in any case, so disregard them. fixes #666
2023-07-04 20:21:48 +02:00
"strings"
"github.com/kr/pretty"
2018-08-25 21:30:25 +02:00
"github.com/pkg/errors"
"github.com/zrepl/zrepl/daemon/logging/trace"
2019-03-22 19:41:12 +01:00
"github.com/zrepl/zrepl/replication/logic/pdu"
"github.com/zrepl/zrepl/util/bandwidthlimit"
"github.com/zrepl/zrepl/util/chainedio"
"github.com/zrepl/zrepl/util/chainlock"
"github.com/zrepl/zrepl/util/envconst"
"github.com/zrepl/zrepl/util/nodefault"
2018-08-25 21:30:25 +02:00
"github.com/zrepl/zrepl/zfs"
zfsprop "github.com/zrepl/zrepl/zfs/property"
)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
type SenderConfig struct {
FSF zfs.DatasetFilter
JobID JobID
Encrypt *nodefault.Bool
SendRaw bool
SendProperties bool
SendBackupProperties bool
SendLargeBlocks bool
SendCompressed bool
SendEmbeddedData bool
SendSaved bool
BandwidthLimit bandwidthlimit.Config
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
func (c *SenderConfig) Validate() error {
c.JobID.MustValidate()
if err := c.Encrypt.ValidateNoDefault(); err != nil {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return errors.Wrap(err, "`Encrypt` field invalid")
}
if _, err := StepHoldTag(c.JobID); err != nil {
return fmt.Errorf("JobID cannot be used for hold tag: %s", err)
}
if err := bandwidthlimit.ValidateConfig(c.BandwidthLimit); err != nil {
return errors.Wrap(err, "`BandwidthLimit` field invalid")
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return nil
}
2018-08-22 00:52:46 +02:00
// Sender implements replication.ReplicationEndpoint for a sending side
type Sender struct {
pdu.UnsafeReplicationServer // prefer compilation errors over default 'method X not implemented' impl
FSFilter zfs.DatasetFilter
jobId JobID
config SenderConfig
bwLimit bandwidthlimit.Wrapper
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
func NewSender(conf SenderConfig) *Sender {
if err := conf.Validate(); err != nil {
panic("invalid config" + err.Error())
}
ratelimiter := bandwidthlimit.WrapperFromConfig(conf.BandwidthLimit)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return &Sender{
FSFilter: conf.FSF,
jobId: conf.JobID,
config: conf,
bwLimit: ratelimiter,
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
}
func (s *Sender) filterCheckFS(fs string) (*zfs.DatasetPath, error) {
dp, err := zfs.NewDatasetPath(fs)
if err != nil {
return nil, err
}
if dp.Length() == 0 {
return nil, errors.New("empty filesystem not allowed")
}
pass, err := s.FSFilter.Filter(dp)
if err != nil {
return nil, err
}
if !pass {
return nil, fmt.Errorf("endpoint does not allow access to filesystem %s", fs)
}
return dp, nil
}
func (s *Sender) ListFilesystems(ctx context.Context, r *pdu.ListFilesystemReq) (*pdu.ListFilesystemRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
fss, err := zfs.ZFSListMapping(ctx, s.FSFilter)
if err != nil {
return nil, err
}
rfss := make([]*pdu.Filesystem, 0, len(fss))
for _, a := range fss {
// TODO: dedup code with Receiver.ListFilesystems
l := getLogger(ctx).WithField("fs", a)
ph, err := zfs.ZFSGetFilesystemPlaceholderState(ctx, a)
if err != nil {
l.WithError(err).Error("error getting placeholder state")
return nil, errors.Wrapf(err, "cannot get placeholder state for fs %q", a)
}
l.WithField("placeholder_state", fmt.Sprintf("%#v", ph)).Debug("placeholder state")
if !ph.FSExists {
l.Error("inconsistent placeholder state: filesystem must exists")
err := errors.Errorf("inconsistent placeholder state: filesystem %q must exist in this context", a.ToString())
return nil, err
}
fs := &pdu.Filesystem{
Path: a.ToString(),
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
// ResumeToken does not make sense from Sender
IsPlaceholder: ph.IsPlaceholder,
}
rfss = append(rfss, fs)
}
res := &pdu.ListFilesystemRes{Filesystems: rfss}
return res, nil
}
func (s *Sender) ListFilesystemVersions(ctx context.Context, r *pdu.ListFilesystemVersionsReq) (*pdu.ListFilesystemVersionsRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
lp, err := s.filterCheckFS(r.GetFilesystem())
if err != nil {
return nil, err
}
fsvs, err := zfs.ZFSListFilesystemVersions(ctx, lp, zfs.ListFilesystemVersionsOptions{})
if err != nil {
return nil, err
}
rfsvs := make([]*pdu.FilesystemVersion, len(fsvs))
for i := range fsvs {
rfsvs[i] = pdu.FilesystemVersionFromZFS(&fsvs[i])
}
res := &pdu.ListFilesystemVersionsRes{Versions: rfsvs}
return res, nil
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
func uncheckedSendArgsFromPDU(fsv *pdu.FilesystemVersion) *zfs.ZFSSendArgVersion {
if fsv == nil {
return nil
}
return &zfs.ZFSSendArgVersion{RelName: fsv.GetRelName(), GUID: fsv.Guid}
}
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
func sendArgsFromPDUAndValidateExistsAndGetVersion(ctx context.Context, fs string, fsv *pdu.FilesystemVersion) (v zfs.FilesystemVersion, err error) {
sendArgs := uncheckedSendArgsFromPDU(fsv)
if sendArgs == nil {
return v, errors.New("must not be nil")
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
version, err := sendArgs.ValidateExistsAndGetVersion(ctx, fs)
if err != nil {
return v, err
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
return version, nil
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
func (s *Sender) sendMakeArgs(ctx context.Context, r *pdu.SendReq) (sendArgs zfs.ZFSSendArgsValidated, _ error) {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
_, err := s.filterCheckFS(r.Filesystem)
if err != nil {
return sendArgs, err
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
sendArgsUnvalidated := zfs.ZFSSendArgsUnvalidated{
FS: r.Filesystem,
From: uncheckedSendArgsFromPDU(r.GetFrom()), // validated by zfs.ZFSSendDry / zfs.ZFSSend
To: uncheckedSendArgsFromPDU(r.GetTo()), // validated by zfs.ZFSSendDry / zfs.ZFSSend
ZFSSendFlags: zfs.ZFSSendFlags{
ResumeToken: r.ResumeToken, // nil or not nil, depending on decoding success
Encrypted: s.config.Encrypt,
Properties: s.config.SendProperties,
BackupProperties: s.config.SendBackupProperties,
Raw: s.config.SendRaw,
LargeBlocks: s.config.SendLargeBlocks,
Compressed: s.config.SendCompressed,
EmbeddedData: s.config.SendEmbeddedData,
Saved: s.config.SendSaved,
},
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
sendArgs, err = sendArgsUnvalidated.Validate(ctx)
if err != nil {
return sendArgs, errors.Wrap(err, "validate send arguments")
}
return sendArgs, nil
}
func (s *Sender) Send(ctx context.Context, r *pdu.SendReq) (*pdu.SendRes, io.ReadCloser, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
sendArgs, err := s.sendMakeArgs(ctx, r)
if err != nil {
return nil, nil, err
}
// create holds or bookmarks of `From` and `To` to guarantee one of the following:
// - that the replication step can always be resumed (`holds`),
// - that the replication step can be interrupted and a future replication
// step with same or different `To` but same `From` is still possible (`bookmarks`)
// - nothing (`none`)
//
// ...
//
// ... actually create the abstractions
replicationGuaranteeOptions, err := replicationGuaranteeOptionsFromPDU(r.GetReplicationConfig().Protection)
if err != nil {
return nil, nil, err
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
replicationGuaranteeStrategy := replicationGuaranteeOptions.Strategy(sendArgs.From != nil)
liveAbs, err := replicationGuaranteeStrategy.SenderPreSend(ctx, s.jobId, &sendArgs)
if err != nil {
return nil, nil, err
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
for _, a := range liveAbs {
if a != nil {
abstractionsCacheSingleton.Put(a)
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
// cleanup the mess that _this function_ might have created in prior failed attempts:
//
// In summary, we delete every endpoint ZFS abstraction created on this filesystem for this job id,
// except for the ones we just created above.
//
// This is the most robust approach to avoid leaking (= forgetting to clean up) endpoint ZFS abstractions,
// all under the assumption that there will only ever be one send for a (jobId,fs) combination at any given time.
//
// Note that the SendCompleted rpc can't be relied upon for this purpose:
// - it might be lost due to network errors,
// - or never be sent by a potentially malicious or buggy client,
// - or never be send because the replication step failed at some point
// (potentially leaving a resumable state on the receiver, which is the case where we really do not want to blow away the step holds too soon.)
//
// Note further that a resuming send, due to the idempotent nature of func CreateReplicationCursor and HoldStep,
// will never lose its step holds because we just (idempotently re-)created them above, before attempting the cleanup.
fix handling of tenative cursor presence if protection strategy doesn't use it (#714) Before this PR, we would panic in the `check` phase of `endpoint.Send()`'s `TryBatchDestroy` call in the following cases: the current protection strategy does NOT produce a tentative replication cursor AND * `FromVersion` is a tentative cursor bookmark * `FromVersion` is a snapshot, and there exists a tentative cursor bookmark for that snapshot * `FromVersion` is a bookmark != tentative cursor bookmark, but there exists a tentative cursor bookmark for the same snapshot as the `FromVersion` bookmark In those cases, the `check` concluded that we would delete `FromVersion`. It came to that conclusion because the tentative cursor isn't part of `obsoleteAbs` if the protection strategy doesn't produce a tentative replication cursor. The scenarios above can happen if the user changes the protection strategy from "with tentative cursor" to one "without tentative replication cursor", while there is a tentative replication cursor on disk. The workaround was to rename the tentative cursor. In all cases above, `TryBatchDestroy` would have destroyed the tentative cursor. In case 1, that would fail the `Send` step and potentially break replication if the cursor is the last common bookmark. The `check` conclusion was correct. In cases 2 and 3, deleting the tentative cursor would have been fine because `FromVersion` was a different entity than the tentative cursor. So, destroying the tentative cursor would be the right call. The solution in this PR is as follows: * add the `FromVersion` to the `liveAbs` set of live abstractions * rewrite the `check` closure to use the full dataset path (`fullpath`) to identify the concrete ZFS object instead of the `zfs.FilesystemVersionEqualIdentity`, which is only identified by matching GUID. * Holds have no dataset path and are not the `FromVersion` in any case, so disregard them. fixes #666
2023-07-04 20:21:48 +02:00
destroyTypes := AbstractionTypeSet{
AbstractionStepHold: true,
AbstractionTentativeReplicationCursorBookmark: true,
}
// The replication planner can also pick an endpoint zfs abstraction as FromVersion.
// Keep it, so that the replication will succeed.
//
// NB: there is no abstraction for snapshots, so, we only need to check bookmarks.
if sendArgs.FromVersion != nil && sendArgs.FromVersion.IsBookmark() {
dp, err := zfs.NewDatasetPath(sendArgs.FS)
if err != nil {
panic(err) // sendArgs is validated, this shouldn't happen
}
liveAbs = append(liveAbs, destroyTypes.ExtractBookmark(dp, sendArgs.FromVersion))
}
func() {
ctx, endSpan := trace.WithSpan(ctx, "cleanup-stale-abstractions")
defer endSpan()
keep := func(a Abstraction) (keep bool) {
keep = false
for _, k := range liveAbs {
keep = keep || AbstractionEquals(a, k)
}
return keep
}
check := func(obsoleteAbs []Abstraction) {
fix handling of tenative cursor presence if protection strategy doesn't use it (#714) Before this PR, we would panic in the `check` phase of `endpoint.Send()`'s `TryBatchDestroy` call in the following cases: the current protection strategy does NOT produce a tentative replication cursor AND * `FromVersion` is a tentative cursor bookmark * `FromVersion` is a snapshot, and there exists a tentative cursor bookmark for that snapshot * `FromVersion` is a bookmark != tentative cursor bookmark, but there exists a tentative cursor bookmark for the same snapshot as the `FromVersion` bookmark In those cases, the `check` concluded that we would delete `FromVersion`. It came to that conclusion because the tentative cursor isn't part of `obsoleteAbs` if the protection strategy doesn't produce a tentative replication cursor. The scenarios above can happen if the user changes the protection strategy from "with tentative cursor" to one "without tentative replication cursor", while there is a tentative replication cursor on disk. The workaround was to rename the tentative cursor. In all cases above, `TryBatchDestroy` would have destroyed the tentative cursor. In case 1, that would fail the `Send` step and potentially break replication if the cursor is the last common bookmark. The `check` conclusion was correct. In cases 2 and 3, deleting the tentative cursor would have been fine because `FromVersion` was a different entity than the tentative cursor. So, destroying the tentative cursor would be the right call. The solution in this PR is as follows: * add the `FromVersion` to the `liveAbs` set of live abstractions * rewrite the `check` closure to use the full dataset path (`fullpath`) to identify the concrete ZFS object instead of the `zfs.FilesystemVersionEqualIdentity`, which is only identified by matching GUID. * Holds have no dataset path and are not the `FromVersion` in any case, so disregard them. fixes #666
2023-07-04 20:21:48 +02:00
// Ensure that we don't delete `From` or `To`.
// Regardless of whether they are in AbstractionTypeSet or not.
// And produce a nice error message in case we do, to aid debugging the resulting panic.
//
// This is especially important for `From`. We could break incremental replication
// if we deleted the last common filesystem version between sender and receiver.
type Problem struct {
sendArgsWhat string
fullpath string
obsoleteAbs Abstraction
}
problems := make([]Problem, 0)
checkFullpaths := make(map[string]string, 2)
checkFullpaths["ToVersion"] = sendArgs.ToVersion.FullPath(sendArgs.FS)
if sendArgs.FromVersion != nil {
fix handling of tenative cursor presence if protection strategy doesn't use it (#714) Before this PR, we would panic in the `check` phase of `endpoint.Send()`'s `TryBatchDestroy` call in the following cases: the current protection strategy does NOT produce a tentative replication cursor AND * `FromVersion` is a tentative cursor bookmark * `FromVersion` is a snapshot, and there exists a tentative cursor bookmark for that snapshot * `FromVersion` is a bookmark != tentative cursor bookmark, but there exists a tentative cursor bookmark for the same snapshot as the `FromVersion` bookmark In those cases, the `check` concluded that we would delete `FromVersion`. It came to that conclusion because the tentative cursor isn't part of `obsoleteAbs` if the protection strategy doesn't produce a tentative replication cursor. The scenarios above can happen if the user changes the protection strategy from "with tentative cursor" to one "without tentative replication cursor", while there is a tentative replication cursor on disk. The workaround was to rename the tentative cursor. In all cases above, `TryBatchDestroy` would have destroyed the tentative cursor. In case 1, that would fail the `Send` step and potentially break replication if the cursor is the last common bookmark. The `check` conclusion was correct. In cases 2 and 3, deleting the tentative cursor would have been fine because `FromVersion` was a different entity than the tentative cursor. So, destroying the tentative cursor would be the right call. The solution in this PR is as follows: * add the `FromVersion` to the `liveAbs` set of live abstractions * rewrite the `check` closure to use the full dataset path (`fullpath`) to identify the concrete ZFS object instead of the `zfs.FilesystemVersionEqualIdentity`, which is only identified by matching GUID. * Holds have no dataset path and are not the `FromVersion` in any case, so disregard them. fixes #666
2023-07-04 20:21:48 +02:00
checkFullpaths["FromVersion"] = sendArgs.FromVersion.FullPath(sendArgs.FS)
}
fix handling of tenative cursor presence if protection strategy doesn't use it (#714) Before this PR, we would panic in the `check` phase of `endpoint.Send()`'s `TryBatchDestroy` call in the following cases: the current protection strategy does NOT produce a tentative replication cursor AND * `FromVersion` is a tentative cursor bookmark * `FromVersion` is a snapshot, and there exists a tentative cursor bookmark for that snapshot * `FromVersion` is a bookmark != tentative cursor bookmark, but there exists a tentative cursor bookmark for the same snapshot as the `FromVersion` bookmark In those cases, the `check` concluded that we would delete `FromVersion`. It came to that conclusion because the tentative cursor isn't part of `obsoleteAbs` if the protection strategy doesn't produce a tentative replication cursor. The scenarios above can happen if the user changes the protection strategy from "with tentative cursor" to one "without tentative replication cursor", while there is a tentative replication cursor on disk. The workaround was to rename the tentative cursor. In all cases above, `TryBatchDestroy` would have destroyed the tentative cursor. In case 1, that would fail the `Send` step and potentially break replication if the cursor is the last common bookmark. The `check` conclusion was correct. In cases 2 and 3, deleting the tentative cursor would have been fine because `FromVersion` was a different entity than the tentative cursor. So, destroying the tentative cursor would be the right call. The solution in this PR is as follows: * add the `FromVersion` to the `liveAbs` set of live abstractions * rewrite the `check` closure to use the full dataset path (`fullpath`) to identify the concrete ZFS object instead of the `zfs.FilesystemVersionEqualIdentity`, which is only identified by matching GUID. * Holds have no dataset path and are not the `FromVersion` in any case, so disregard them. fixes #666
2023-07-04 20:21:48 +02:00
for _, a := range obsoleteAbs {
for what, fullpath := range checkFullpaths {
if a.GetFullPath() == fullpath && a.GetType().IsSnapshotOrBookmark() {
problems = append(problems, Problem{
sendArgsWhat: what,
fullpath: fullpath,
obsoleteAbs: a,
})
}
}
}
fix handling of tenative cursor presence if protection strategy doesn't use it (#714) Before this PR, we would panic in the `check` phase of `endpoint.Send()`'s `TryBatchDestroy` call in the following cases: the current protection strategy does NOT produce a tentative replication cursor AND * `FromVersion` is a tentative cursor bookmark * `FromVersion` is a snapshot, and there exists a tentative cursor bookmark for that snapshot * `FromVersion` is a bookmark != tentative cursor bookmark, but there exists a tentative cursor bookmark for the same snapshot as the `FromVersion` bookmark In those cases, the `check` concluded that we would delete `FromVersion`. It came to that conclusion because the tentative cursor isn't part of `obsoleteAbs` if the protection strategy doesn't produce a tentative replication cursor. The scenarios above can happen if the user changes the protection strategy from "with tentative cursor" to one "without tentative replication cursor", while there is a tentative replication cursor on disk. The workaround was to rename the tentative cursor. In all cases above, `TryBatchDestroy` would have destroyed the tentative cursor. In case 1, that would fail the `Send` step and potentially break replication if the cursor is the last common bookmark. The `check` conclusion was correct. In cases 2 and 3, deleting the tentative cursor would have been fine because `FromVersion` was a different entity than the tentative cursor. So, destroying the tentative cursor would be the right call. The solution in this PR is as follows: * add the `FromVersion` to the `liveAbs` set of live abstractions * rewrite the `check` closure to use the full dataset path (`fullpath`) to identify the concrete ZFS object instead of the `zfs.FilesystemVersionEqualIdentity`, which is only identified by matching GUID. * Holds have no dataset path and are not the `FromVersion` in any case, so disregard them. fixes #666
2023-07-04 20:21:48 +02:00
if len(problems) == 0 {
return
}
var msg strings.Builder
fmt.Fprintf(&msg, "cleaning up send stale would destroy send args:\n")
fmt.Fprintf(&msg, " SendArgs: %s\n", pretty.Sprint(sendArgs))
for _, check := range problems {
fmt.Fprintf(&msg, "would delete %s %s because it was deemed an obsolete abstraction: %s\n",
check.sendArgsWhat, check.fullpath, check.obsoleteAbs)
}
panic(msg.String())
}
abstractionsCacheSingleton.TryBatchDestroy(ctx, s.jobId, sendArgs.FS, destroyTypes, keep, check)
}()
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
var sendStream io.ReadCloser
sendStream, err = zfs.ZFSSend(ctx, sendArgs)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if err != nil {
// it's ok to not destroy the abstractions we just created here, a new send attempt will take care of it
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return nil, nil, errors.Wrap(err, "zfs send failed")
}
// apply rate limit
sendStream = s.bwLimit.WrapReadCloser(sendStream)
res := &pdu.SendRes{
ExpectedSize: 0,
UsedResumeToken: r.ResumeToken != "",
}
return res, sendStream, nil
}
func (s *Sender) SendDry(ctx context.Context, r *pdu.SendReq) (*pdu.SendRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
sendArgs, err := s.sendMakeArgs(ctx, r)
if err != nil {
return nil, err
}
si, err := zfs.ZFSSendDry(ctx, sendArgs)
if err != nil {
return nil, errors.Wrap(err, "zfs send dry failed")
}
// From now on, assume that sendArgs has been validated by ZFSSendDry
// (because validation involves shelling out, it's actually a little expensive)
res := &pdu.SendRes{
ExpectedSize: si.SizeEstimate,
UsedResumeToken: r.ResumeToken != "",
}
return res, nil
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
func (p *Sender) SendCompleted(ctx context.Context, r *pdu.SendCompletedReq) (*pdu.SendCompletedRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
orig := r.GetOriginalReq() // may be nil, always use proto getters
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
fsp, err := p.filterCheckFS(orig.GetFilesystem())
if err != nil {
return nil, err
}
fs := fsp.ToString()
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
var from *zfs.FilesystemVersion
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if orig.GetFrom() != nil {
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
f, err := sendArgsFromPDUAndValidateExistsAndGetVersion(ctx, fs, orig.GetFrom()) // no shadow
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if err != nil {
return nil, errors.Wrap(err, "validate `from` exists")
}
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
from = &f
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
to, err := sendArgsFromPDUAndValidateExistsAndGetVersion(ctx, fs, orig.GetTo())
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if err != nil {
return nil, errors.Wrap(err, "validate `to` exists")
}
replicationGuaranteeOptions, err := replicationGuaranteeOptionsFromPDU(orig.GetReplicationConfig().Protection)
if err != nil {
return nil, err
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
liveAbs, err := replicationGuaranteeOptions.Strategy(from != nil).SenderPostRecvConfirmed(ctx, p.jobId, fs, to)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if err != nil {
return nil, err
}
for _, a := range liveAbs {
if a != nil {
abstractionsCacheSingleton.Put(a)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
}
keep := func(a Abstraction) (keep bool) {
keep = false
for _, k := range liveAbs {
keep = keep || AbstractionEquals(a, k)
}
return keep
}
destroyTypes := AbstractionTypeSet{
AbstractionStepHold: true,
AbstractionTentativeReplicationCursorBookmark: true,
AbstractionReplicationCursorBookmarkV2: true,
}
abstractionsCacheSingleton.TryBatchDestroy(ctx, p.jobId, fs, destroyTypes, keep, nil)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return &pdu.SendCompletedRes{}, nil
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
func (p *Sender) DestroySnapshots(ctx context.Context, req *pdu.DestroySnapshotsReq) (*pdu.DestroySnapshotsRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
dp, err := p.filterCheckFS(req.Filesystem)
if err != nil {
return nil, err
}
return doDestroySnapshots(ctx, dp, req.Snapshots)
}
func (p *Sender) Ping(ctx context.Context, req *pdu.PingReq) (*pdu.PingRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
res := pdu.PingRes{
Echo: req.GetMessage(),
}
return &res, nil
}
func (p *Sender) PingDataconn(ctx context.Context, req *pdu.PingReq) (*pdu.PingRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return p.Ping(ctx, req)
}
func (p *Sender) WaitForConnectivity(ctx context.Context) error {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return nil
}
func (p *Sender) ReplicationCursor(ctx context.Context, req *pdu.ReplicationCursorReq) (*pdu.ReplicationCursorRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
dp, err := p.filterCheckFS(req.Filesystem)
if err != nil {
return nil, err
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
cursor, err := GetMostRecentReplicationCursorOfJob(ctx, dp.ToString(), p.jobId)
if err != nil {
return nil, err
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if cursor == nil {
return &pdu.ReplicationCursorRes{Result: &pdu.ReplicationCursorRes_Notexist{Notexist: true}}, nil
}
return &pdu.ReplicationCursorRes{Result: &pdu.ReplicationCursorRes_Guid{Guid: cursor.Guid}}, nil
}
func (p *Sender) Receive(ctx context.Context, r *pdu.ReceiveReq, _ io.ReadCloser) (*pdu.ReceiveRes, error) {
return nil, fmt.Errorf("sender does not implement Receive()")
}
type FSFilter interface { // FIXME unused
Filter(path *zfs.DatasetPath) (pass bool, err error)
UserSpecifiedDatasets() zfs.UserSpecifiedDatasetsSet
}
// FIXME: can we get away without error types here?
type FSMap interface { // FIXME unused
FSFilter
2018-08-25 21:30:25 +02:00
Map(path *zfs.DatasetPath) (*zfs.DatasetPath, error)
Invert() (FSMap, error)
AsFilter() FSFilter
}
// NOTE: when adding members to this struct, remember
// to add them to `ReceiverConfig.copyIn()`
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
type ReceiverConfig struct {
JobID JobID
RootWithoutClientComponent *zfs.DatasetPath
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
AppendClientIdentity bool
InheritProperties []zfsprop.Property
OverrideProperties map[zfsprop.Property]string
BandwidthLimit bandwidthlimit.Config
PlaceholderEncryption PlaceholderCreationEncryptionProperty
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
//go:generate enumer -type=PlaceholderCreationEncryptionProperty -transform=kebab -trimprefix=PlaceholderCreationEncryptionProperty
type PlaceholderCreationEncryptionProperty int
// Note: the constant names, transformed through enumer, are part of the config format!
const (
PlaceholderCreationEncryptionPropertyUnspecified PlaceholderCreationEncryptionProperty = 1 << iota
PlaceholderCreationEncryptionPropertyInherit
PlaceholderCreationEncryptionPropertyOff
)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
func (c *ReceiverConfig) copyIn() {
c.RootWithoutClientComponent = c.RootWithoutClientComponent.Copy()
pInherit := make([]zfsprop.Property, len(c.InheritProperties))
copy(pInherit, c.InheritProperties)
c.InheritProperties = pInherit
pOverride := make(map[zfsprop.Property]string, len(c.OverrideProperties))
for key, value := range c.OverrideProperties {
pOverride[key] = value
}
c.OverrideProperties = pOverride
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
func (c *ReceiverConfig) Validate() error {
c.JobID.MustValidate()
for _, prop := range c.InheritProperties {
err := prop.Validate()
if err != nil {
return errors.Wrapf(err, "inherit property %q", prop)
}
}
for prop := range c.OverrideProperties {
err := prop.Validate()
if err != nil {
return errors.Wrapf(err, "override property %q", prop)
}
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if c.RootWithoutClientComponent.Length() <= 0 {
return errors.New("RootWithoutClientComponent must not be an empty dataset path")
}
if err := bandwidthlimit.ValidateConfig(c.BandwidthLimit); err != nil {
return errors.Wrap(err, "`BandwidthLimit` field invalid")
}
if !c.PlaceholderEncryption.IsAPlaceholderCreationEncryptionProperty() {
return errors.Errorf("`PlaceholderEncryption` field is invalid")
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return nil
}
2018-08-22 00:52:46 +02:00
// Receiver implements replication.ReplicationEndpoint for a receiving side
type Receiver struct {
pdu.UnsafeReplicationServer // prefer compilation errors over default 'method X not implemented' impl
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
conf ReceiverConfig // validated
bwLimit bandwidthlimit.Wrapper
recvParentCreationMtx *chainlock.L
Test_OverrideClientIdentityFunc func() string // for use by platformtest
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
func NewReceiver(config ReceiverConfig) *Receiver {
config.copyIn()
if err := config.Validate(); err != nil {
panic(err)
}
return &Receiver{
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
conf: config,
recvParentCreationMtx: chainlock.New(),
bwLimit: bandwidthlimit.WrapperFromConfig(config.BandwidthLimit),
}
}
func TestClientIdentity(rootFS *zfs.DatasetPath, clientIdentity string) error {
_, err := clientRoot(rootFS, clientIdentity)
return err
}
func clientRoot(rootFS *zfs.DatasetPath, clientIdentity string) (*zfs.DatasetPath, error) {
rootFSLen := rootFS.Length()
clientRootStr := path.Join(rootFS.ToString(), clientIdentity)
clientRoot, err := zfs.NewDatasetPath(clientRootStr)
if err != nil {
return nil, err
}
if rootFSLen+1 != clientRoot.Length() {
return nil, fmt.Errorf("client identity must be a single ZFS filesystem path component")
}
return clientRoot, nil
}
func (s *Receiver) clientRootFromCtx(ctx context.Context) *zfs.DatasetPath {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if !s.conf.AppendClientIdentity {
return s.conf.RootWithoutClientComponent.Copy()
}
var clientIdentity string
if s.Test_OverrideClientIdentityFunc != nil {
clientIdentity = s.Test_OverrideClientIdentityFunc()
} else {
var ok bool
clientIdentity, ok = ctx.Value(ClientIdentityKey).(string) // no shadow
if !ok {
panic("ClientIdentityKey context value must be set")
}
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
clientRoot, err := clientRoot(s.conf.RootWithoutClientComponent, clientIdentity)
if err != nil {
panic(fmt.Sprintf("ClientIdentityContextKey must have been validated before invoking Receiver: %s", err))
}
return clientRoot
}
type subroot struct {
localRoot *zfs.DatasetPath
}
var _ zfs.DatasetFilter = subroot{}
// Filters local p
func (f subroot) Filter(p *zfs.DatasetPath) (pass bool, err error) {
return p.HasPrefix(f.localRoot) && !p.Equal(f.localRoot), nil
}
func (f subroot) UserSpecifiedDatasets() zfs.UserSpecifiedDatasetsSet {
return zfs.UserSpecifiedDatasetsSet{
f.localRoot.ToString(): true,
}
}
func (f subroot) MapToLocal(fs string) (*zfs.DatasetPath, error) {
p, err := zfs.NewDatasetPath(fs)
if err != nil {
return nil, err
}
if p.Length() == 0 {
return nil, errors.Errorf("cannot map empty filesystem")
}
c := f.localRoot.Copy()
c.Extend(p)
return c, nil
}
func (s *Receiver) ListFilesystems(ctx context.Context, req *pdu.ListFilesystemReq) (*pdu.ListFilesystemRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
// first make sure that root_fs is imported
if rphs, err := zfs.ZFSGetFilesystemPlaceholderState(ctx, s.conf.RootWithoutClientComponent); err != nil {
return nil, errors.Wrap(err, "cannot determine whether root_fs exists")
} else if !rphs.FSExists {
getLogger(ctx).WithField("root_fs", s.conf.RootWithoutClientComponent).Error("root_fs does not exist")
return nil, errors.Errorf("root_fs does not exist")
}
root := s.clientRootFromCtx(ctx)
filtered, err := zfs.ZFSListMapping(ctx, subroot{root})
if err != nil {
return nil, err
}
// present filesystem without the root_fs prefix
fss := make([]*pdu.Filesystem, 0, len(filtered))
for _, a := range filtered {
l := getLogger(ctx).WithField("fs", a)
ph, err := zfs.ZFSGetFilesystemPlaceholderState(ctx, a)
if err != nil {
l.WithError(err).Error("error getting placeholder state")
return nil, errors.Wrapf(err, "cannot get placeholder state for fs %q", a)
}
l.WithField("placeholder_state", fmt.Sprintf("%#v", ph)).Debug("placeholder state")
if !ph.FSExists {
l.Error("inconsistent placeholder state: filesystem must exists")
err := errors.Errorf("inconsistent placeholder state: filesystem %q must exist in this context", a.ToString())
return nil, err
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
token, err := zfs.ZFSGetReceiveResumeTokenOrEmptyStringIfNotSupported(ctx, a)
if err != nil {
l.WithError(err).Error("cannot get receive resume token")
return nil, err
}
l.WithField("receive_resume_token", token).Debug("receive resume token")
a.TrimPrefix(root)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
fs := &pdu.Filesystem{
Path: a.ToString(),
IsPlaceholder: ph.IsPlaceholder,
ResumeToken: token,
}
fss = append(fss, fs)
}
if len(fss) == 0 {
getLogger(ctx).Debug("no filesystems found")
return &pdu.ListFilesystemRes{}, nil
}
return &pdu.ListFilesystemRes{Filesystems: fss}, nil
}
func (s *Receiver) ListFilesystemVersions(ctx context.Context, req *pdu.ListFilesystemVersionsReq) (*pdu.ListFilesystemVersionsRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
root := s.clientRootFromCtx(ctx)
lp, err := subroot{root}.MapToLocal(req.GetFilesystem())
if err != nil {
return nil, err
}
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
// TODO share following code with sender
fsvs, err := zfs.ZFSListFilesystemVersions(ctx, lp, zfs.ListFilesystemVersionsOptions{})
if err != nil {
return nil, err
}
rfsvs := make([]*pdu.FilesystemVersion, len(fsvs))
for i := range fsvs {
rfsvs[i] = pdu.FilesystemVersionFromZFS(&fsvs[i])
}
return &pdu.ListFilesystemVersionsRes{Versions: rfsvs}, nil
}
func (s *Receiver) Ping(ctx context.Context, req *pdu.PingReq) (*pdu.PingRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
res := pdu.PingRes{
Echo: req.GetMessage(),
}
return &res, nil
}
func (s *Receiver) PingDataconn(ctx context.Context, req *pdu.PingReq) (*pdu.PingRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return s.Ping(ctx, req)
}
func (s *Receiver) WaitForConnectivity(ctx context.Context) error {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return nil
}
func (s *Receiver) ReplicationCursor(ctx context.Context, _ *pdu.ReplicationCursorReq) (*pdu.ReplicationCursorRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return nil, fmt.Errorf("ReplicationCursor not implemented for Receiver")
}
func (s *Receiver) Send(ctx context.Context, req *pdu.SendReq) (*pdu.SendRes, io.ReadCloser, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return nil, nil, fmt.Errorf("receiver does not implement Send()")
}
func (s *Receiver) SendDry(ctx context.Context, r *pdu.SendReq) (*pdu.SendRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
return nil, fmt.Errorf("receiver does not implement SendDry()")
}
func (s *Receiver) receive_GetPlaceholderCreationEncryptionValue(client_root, path *zfs.DatasetPath) (zfs.FilesystemPlaceholderCreateEncryptionValue, error) {
if !s.conf.PlaceholderEncryption.IsAPlaceholderCreationEncryptionProperty() {
panic(s.conf.PlaceholderEncryption)
}
if client_root.Equal(path) && s.conf.PlaceholderEncryption == PlaceholderCreationEncryptionPropertyUnspecified {
// If our Receiver is configured to append a client component to s.conf.RootWithoutClientComponent
// then that dataset is always going to be a placeholder.
// We don't want to burden users with the concept of placeholders if their `filesystems` filter on the sender
// doesn't introduce any gaps.
// Since the dataset hierarchy up to and including that client component dataset is still fully controlled by us,
// using `inherit` is going to make it work in all expected use cases.
return zfs.FilesystemPlaceholderCreateEncryptionInherit, nil
}
switch s.conf.PlaceholderEncryption {
case PlaceholderCreationEncryptionPropertyUnspecified:
return 0, fmt.Errorf("placeholder filesystem encryption handling is unspecified in receiver config")
case PlaceholderCreationEncryptionPropertyInherit:
return zfs.FilesystemPlaceholderCreateEncryptionInherit, nil
case PlaceholderCreationEncryptionPropertyOff:
return zfs.FilesystemPlaceholderCreateEncryptionOff, nil
default:
panic(s.conf.PlaceholderEncryption)
}
}
func (s *Receiver) Receive(ctx context.Context, req *pdu.ReceiveReq, receive io.ReadCloser) (*pdu.ReceiveRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
getLogger(ctx).Debug("incoming Receive")
defer receive.Close()
root := s.clientRootFromCtx(ctx)
lp, err := subroot{root}.MapToLocal(req.Filesystem)
if err != nil {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return nil, errors.Wrap(err, "`Filesystem` invalid")
}
to := uncheckedSendArgsFromPDU(req.GetTo())
if to == nil {
return nil, errors.New("`To` must not be nil")
}
if !to.IsSnapshot() {
return nil, errors.New("`To` must be a snapshot")
}
// create placeholder parent filesystems as appropriate
//
// Manipulating the ZFS dataset hierarchy must happen exclusively.
// TODO: Use fine-grained locking to allow separate clients / requests to pass
// through the following section concurrently when operating on disjoint
// ZFS dataset hierarchy subtrees.
var visitErr error
func() {
getLogger(ctx).Debug("begin acquire recvParentCreationMtx")
defer s.recvParentCreationMtx.Lock().Unlock()
getLogger(ctx).Debug("end acquire recvParentCreationMtx")
defer getLogger(ctx).Debug("release recvParentCreationMtx")
f := zfs.NewDatasetPathForest()
f.Add(lp)
getLogger(ctx).Debug("begin tree-walk")
f.WalkTopDown(func(v *zfs.DatasetPathVisit) (visitChildTree bool) {
if v.Path.Equal(lp) {
return false
}
l := getLogger(ctx).
WithField("placeholder_fs", v.Path.ToString()).
WithField("receive_fs", lp.ToString())
ph, err := zfs.ZFSGetFilesystemPlaceholderState(ctx, v.Path)
l.WithField("placeholder_state", fmt.Sprintf("%#v", ph)).
WithField("err", fmt.Sprintf("%s", err)).
WithField("errType", fmt.Sprintf("%T", err)).
Debug("get placeholder state for filesystem")
if err != nil {
visitErr = errors.Wrapf(err, "cannot get placeholder state of %s", v.Path.ToString())
return false
}
if !ph.FSExists {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if s.conf.RootWithoutClientComponent.HasPrefix(v.Path) {
if v.Path.Length() == 1 {
visitErr = fmt.Errorf("pool %q not imported", v.Path.ToString())
} else {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
visitErr = fmt.Errorf("root_fs %q does not exist", s.conf.RootWithoutClientComponent.ToString())
}
l.WithError(visitErr).Error("placeholders are only created automatically below root_fs")
return false
}
// compute the value lazily so that users who don't rely on
// placeholders can use the default value PlaceholderCreationEncryptionPropertyUnspecified
placeholderEncryption, err := s.receive_GetPlaceholderCreationEncryptionValue(root, v.Path)
if err != nil {
l.WithError(err).Error("cannot create placeholder filesystem") // logger already contains path
visitErr = errors.Wrapf(err, "cannot create placeholder filesystem %s", v.Path.ToString())
return false
}
l := l.WithField("encryption", placeholderEncryption)
l.Debug("creating placeholder filesystem")
err = zfs.ZFSCreatePlaceholderFilesystem(ctx, v.Path, v.Parent.Path, placeholderEncryption)
if err != nil {
l.WithError(err).Error("cannot create placeholder filesystem") // logger already contains path
visitErr = errors.Wrapf(err, "cannot create placeholder filesystem %s", v.Path.ToString())
return false
}
l.Info("created placeholder filesystem")
return true
} else {
l.Debug("filesystem exists")
return true // leave this fs as is
}
})
}()
getLogger(ctx).WithField("visitErr", visitErr).Debug("complete tree-walk")
if visitErr != nil {
return nil, visitErr
}
log := getLogger(ctx).WithField("proto_fs", req.GetFilesystem()).WithField("local_fs", lp.ToString())
// determine whether we need to rollback the filesystem / change its placeholder state
var clearPlaceholderProperty bool
var recvOpts zfs.RecvOptions
ph, err := zfs.ZFSGetFilesystemPlaceholderState(ctx, lp)
if err != nil {
return nil, errors.Wrap(err, "cannot get placeholder state")
}
log.WithField("placeholder_state", fmt.Sprintf("%#v", ph)).Debug("placeholder state")
recvOpts.InheritProperties = s.conf.InheritProperties
recvOpts.OverrideProperties = s.conf.OverrideProperties
if ph.FSExists && ph.IsPlaceholder {
recvOpts.RollbackAndForceRecv = true
clearPlaceholderProperty = true
}
if clearPlaceholderProperty {
log.Info("clearing placeholder property")
if err := zfs.ZFSSetPlaceholder(ctx, lp, false); err != nil {
return nil, fmt.Errorf("cannot clear placeholder property for forced receive: %s", err)
}
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
if req.ClearResumeToken && ph.FSExists {
log.Info("clearing resume token")
if err := zfs.ZFSRecvClearResumeToken(ctx, lp.ToString()); err != nil {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return nil, errors.Wrap(err, "cannot clear resume token")
}
}
recvOpts.SavePartialRecvState, err = zfs.ResumeRecvSupported(ctx, lp)
if err != nil {
return nil, errors.Wrap(err, "cannot determine whether we can use resumable send & recv")
}
// apply rate limit
receive = s.bwLimit.WrapReadCloser(receive)
var peek bytes.Buffer
var MaxPeek = envconst.Int64("ZREPL_ENDPOINT_RECV_PEEK_SIZE", 1<<20)
log.WithField("max_peek_bytes", MaxPeek).Info("peeking incoming stream")
if _, err := io.Copy(&peek, io.LimitReader(receive, MaxPeek)); err != nil {
log.WithError(err).Error("cannot read peek-buffer from send stream")
}
var peekCopy bytes.Buffer
if n, err := peekCopy.Write(peek.Bytes()); err != nil || n != peek.Len() {
panic(peek.Len())
}
log.WithField("opts", fmt.Sprintf("%#v", recvOpts)).Debug("start receive command")
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
snapFullPath := to.FullPath(lp.ToString())
if err := zfs.ZFSRecv(ctx, lp.ToString(), to, chainedio.NewChainedReader(&peek, receive), recvOpts); err != nil {
// best-effort rollback of placeholder state if the recv didn't start
_, resumableStatePresent := err.(*zfs.RecvFailedWithResumeTokenErr)
disablePlaceholderRestoration := envconst.Bool("ZREPL_ENDPOINT_DISABLE_PLACEHOLDER_RESTORATION", false)
placeholderRestored := !ph.IsPlaceholder
if !disablePlaceholderRestoration && !resumableStatePresent && recvOpts.RollbackAndForceRecv && ph.FSExists && ph.IsPlaceholder && clearPlaceholderProperty {
log.Info("restoring placeholder property")
if phErr := zfs.ZFSSetPlaceholder(ctx, lp, true); phErr != nil {
log.WithError(phErr).Error("cannot restore placeholder property after failed receive, subsequent replications will likely fail with a different error")
// fallthrough
} else {
placeholderRestored = true
}
// fallthrough
}
// deal with failing initial encrypted send & recv
if _, ok := err.(*zfs.RecvDestroyOrOverwriteEncryptedErr); ok && ph.IsPlaceholder && placeholderRestored {
msg := `cannot automatically replace placeholder filesystem with incoming send stream - please see receive-side log for details`
err := errors.New(msg)
log.Error(msg)
log.Error(`zrepl creates placeholder filesystems on the receiving side of a replication to match the sending side's dataset hierarchy`)
log.Error(`zrepl uses zfs receive -F to replace those placeholders with incoming full sends`)
log.Error(`OpenZFS native encryption prohibits zfs receive -F for encrypted filesystems`)
log.Error(`the current zrepl placeholder filesystem concept is thus incompatible with OpenZFS native encryption`)
tempStartFullRecvFS := lp.Copy().ToString() + ".zrepl.initial-recv"
tempStartFullRecvFSDP, dpErr := zfs.NewDatasetPath(tempStartFullRecvFS)
if dpErr != nil {
log.WithError(dpErr).Error("cannot determine temporary filesystem name for initial encrypted recv workaround")
return nil, err // yes, err, not dpErr
}
log := log.WithField("temp_recv_fs", tempStartFullRecvFS)
log.Error(`as a workaround, zrepl will now attempt to re-receive the beginning of the stream into a temporary filesystem temp_recv_fs`)
log.Error(`if that step succeeds: shut down zrepl and use 'zfs rename' to swap temp_recv_fs with local_fs, then restart zrepl`)
log.Error(`replication will then resume using resumable send+recv`)
tempPH, phErr := zfs.ZFSGetFilesystemPlaceholderState(ctx, tempStartFullRecvFSDP)
if phErr != nil {
log.WithError(phErr).Error("cannot determine placeholder state of temp_recv_fs")
return nil, err // yes, err, not dpErr
}
if tempPH.FSExists {
log.Error("temp_recv_fs already exists, assuming a (partial) initial recv to that filesystem has already been done")
return nil, err
}
recvOpts.RollbackAndForceRecv = false
recvOpts.SavePartialRecvState = true
rerecvErr := zfs.ZFSRecv(ctx, tempStartFullRecvFS, to, chainedio.NewChainedReader(&peekCopy), recvOpts)
if _, isResumable := rerecvErr.(*zfs.RecvFailedWithResumeTokenErr); rerecvErr == nil || isResumable {
log.Error("completed re-receive into temporary filesystem temp_recv_fs, now shut down zrepl and use zfs rename to swap temp_recv_fs with local_fs")
} else {
log.WithError(rerecvErr).Error("failed to receive the beginning of the stream into temporary filesystem temp_recv_fs")
log.Error("we advise you to collect the error log and current configuration, open an issue on GitHub, and revert to your previous configuration in the meantime")
}
log.Error(`if you would like to see improvements to this situation, please open an issue on GitHub`)
return nil, err
}
log.
WithError(err).
WithField("opts", fmt.Sprintf("%#v", recvOpts)).
Error("zfs receive failed")
return nil, err
}
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
// validate that we actually received what the sender claimed
endpoint: refactor, fix stale holds on initial replication failure, zfs-abstractions subcmd, more efficient ZFS queries The motivation for this recatoring are based on two independent issues: - @JMoVS found that the changes merged as part of #259 slowed his OS X based installation down significantly. Analysis of the zfs command logging introduced in #296 showed that `zfs holds` took most of the execution time, and they pointed out that not all of those `zfs holds` invocations were actually necessary. I.e.: zrepl was inefficient about retrieving information from ZFS. - @InsanePrawn found that failures on initial replication would lead to step holds accumulating on the sending side, i.e. they would never be cleaned up in the HintMostRecentCommonAncestor RPC handler. That was because we only sent that RPC if there was a most recent common ancestor detected during replication planning. @InsanePrawn prototyped an implementation of a `zrepl zfs-abstractions release` command to mitigate the situation. As part of that development work and back-and-forth with @problame, it became evident that the abstractions that #259 built on top of zfs in package endpoint (step holds, replication cursor, last-received-hold), were not well-represented for re-use in the `zrepl zfs-abstractions release` subocommand prototype. This commit refactors package endpoint to address both of these issues: - endpoint abstractions now share an interface `Abstraction` that, among other things, provides a uniform `Destroy()` method. However, that method should not be destroyed directly but instead the package-level `BatchDestroy` function should be used in order to allow for a migration to zfs channel programs in the future. - endpoint now has a query facitilty (`ListAbstractions`) which is used to find on-disk - step holds and bookmarks - replication cursors (v1, v2) - last-received-holds By describing the query in a struct, we can centralized the retrieval of information via the ZFS CLI and only have to be clever once. We are "clever" in the following ways: - When asking for hold-based abstractions, we only run `zfs holds` on snapshot that have `userrefs` > 0 - To support this functionality, add field `UserRefs` to zfs.FilesystemVersion and retrieve it anywhere we retrieve zfs.FilesystemVersion from ZFS. - When asking only for bookmark-based abstractions, we only run `zfs list -t bookmark`, not with snapshots. - Currently unused (except for CLI) per-filesystem concurrent lookup - Option to only include abstractions with CreateTXG in a specified range - refactor `endpoint`'s various ZFS info retrieval methods to use `ListAbstractions` - rename the `zrepl holds list` command to `zrepl zfs-abstractions list` - make `zrepl zfs-abstractions list` consume endpoint.ListAbstractions - Add a `ListStale` method which, given a query template, lists stale holds and bookmarks. - it uses replication cursor has different modes - the new `zrepl zfs-abstractions release-{all,stale}` commands can be used to remove abstractions of package endpoint - Adjust HintMostRecentCommonAncestor RPC for stale-holds cleanup: - send it also if no most recent common ancestor exists between sender and receiver - have the sender clean up its abstractions when it receives the RPC with no most recent common ancestor, using `ListStale` - Due to changed semantics, bump the protocol version. - Adjust HintMostRecentCommonAncestor RPC for performance problems encountered by @JMoVS - by default, per (job,fs)-combination, only consider cleaning step holds in the createtxg range `[last replication cursor,conservatively-estimated-receive-side-version)` - this behavior ensures resumability at cost proportional to the time that replication was donw - however, as explained in a comment, we might leak holds if the zrepl daemon stops running - that trade-off is acceptable because in the presumably rare this might happen the user has two tools at their hand: - Tool 1: run `zrepl zfs-abstractions release-stale` - Tool 2: use env var `ZREPL_ENDPOINT_SENDER_HINT_MOST_RECENT_STEP_HOLD_CLEANUP_MODE` to adjust the lower bound of the createtxg range (search for it in the code). The env var can also be used to disable hold-cleanup on the send-side entirely. supersedes closes #293 supersedes closes #282 fixes #280 fixes #278 Additionaly, we fixed a couple of bugs: - zfs: fix half-nil error reporting of dataset-does-not-exist for ZFSListChan and ZFSBookmark - endpoint: Sender's `HintMostRecentCommonAncestor` handler would not check whether access to the specified filesystem was allowed.
2020-03-26 23:43:17 +01:00
toRecvd, err := to.ValidateExistsAndGetVersion(ctx, lp.ToString())
if err != nil {
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
msg := "receive request's `To` version does not match what we received in the stream"
log.WithError(err).WithField("snap", snapFullPath).Error(msg)
log.Error("aborting recv request, but keeping received snapshot for inspection")
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return nil, errors.Wrap(err, msg)
}
replicationGuaranteeOptions, err := replicationGuaranteeOptionsFromPDU(req.GetReplicationConfig().Protection)
if err != nil {
return nil, err
}
replicationGuaranteeStrategy := replicationGuaranteeOptions.Strategy(ph.FSExists)
liveAbs, err := replicationGuaranteeStrategy.ReceiverPostRecv(ctx, s.conf.JobID, lp.ToString(), toRecvd)
if err != nil {
return nil, err
}
for _, a := range liveAbs {
if a != nil {
abstractionsCacheSingleton.Put(a)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
}
}
keep := func(a Abstraction) (keep bool) {
keep = false
for _, k := range liveAbs {
keep = keep || AbstractionEquals(a, k)
}
return keep
}
check := func(obsoleteAbs []Abstraction) {
for _, abs := range obsoleteAbs {
if zfs.FilesystemVersionEqualIdentity(abs.GetFilesystemVersion(), toRecvd) {
panic(fmt.Sprintf("would destroy endpoint abstraction around the filesystem version we just received %s", abs))
}
}
}
destroyTypes := AbstractionTypeSet{
AbstractionLastReceivedHold: true,
}
abstractionsCacheSingleton.TryBatchDestroy(ctx, s.conf.JobID, lp.ToString(), destroyTypes, keep, check)
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return &pdu.ReceiveRes{}, nil
}
func (s *Receiver) DestroySnapshots(ctx context.Context, req *pdu.DestroySnapshotsReq) (*pdu.DestroySnapshotsRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
root := s.clientRootFromCtx(ctx)
lp, err := subroot{root}.MapToLocal(req.Filesystem)
if err != nil {
return nil, err
}
return doDestroySnapshots(ctx, lp, req.Snapshots)
}
func (p *Receiver) SendCompleted(ctx context.Context, _ *pdu.SendCompletedReq) (*pdu.SendCompletedRes, error) {
defer trace.WithSpanFromStackUpdateCtx(&ctx)()
new features: {resumable,encrypted,hold-protected} send-recv, last-received-hold - **Resumable Send & Recv Support** No knobs required, automatically used where supported. - **Hold-Protected Send & Recv** Automatic ZFS holds to ensure that we can always resume a replication step. - **Encrypted Send & Recv Support** for OpenZFS native encryption. Configurable at the job level, i.e., for all filesystems a job is responsible for. - **Receive-side hold on last received dataset** The counterpart to the replication cursor bookmark on the send-side. Ensures that incremental replication will always be possible between a sender and receiver. Design Doc ---------- `replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable. The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc). We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc. This might BREAK CONFIG on upgrade. Protocol Version Bump --------------------- This commit makes backwards-incompatible changes to the replication/pdu protobufs. Thus, bump the version number used in the protocol handshake. Replication Cursor Format Change -------------------------------- The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}` Including the GUID enables transaction-safe moving-forward of the cursor. Including the job id enables that multiple sending jobs can send the same filesystem without interfering. The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors. Changes in This Commit ---------------------- - package zfs - infrastructure for holds - infrastructure for resume token decoding - implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code - ZFSSendArgs to specify a ZFS send operation - validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`) - RecvOptions support for `recv -s` flag - convert a bunch of ZFS operations to be idempotent - achieved through more differentiated error message scraping / additional pre-/post-checks - package replication/pdu - add field for encryption to send request messages - add fields for resume handling to send & recv request messages - receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into - can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream) - used to set `last-received-hold` - package replication/logic - introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender - integrate encryption and resume token support into `Step` struct - package endpoint - move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go` - step-holds + step-bookmarks - last-received-hold - new replication cursor + old replication cursor compat code - adjust `endpoint/endpoint.go` handlers for - encryption - resumability - new replication cursor - last-received-hold - client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it - client subcommand `zrepl migrate replication-cursor:v1-v2`
2019-09-11 17:19:17 +02:00
return &pdu.SendCompletedRes{}, nil
}
func doDestroySnapshots(ctx context.Context, lp *zfs.DatasetPath, snaps []*pdu.FilesystemVersion) (*pdu.DestroySnapshotsRes, error) {
reqs := make([]*zfs.DestroySnapOp, len(snaps))
ress := make([]*pdu.DestroySnapshotRes, len(snaps))
errs := make([]error, len(snaps))
for i, fsv := range snaps {
if fsv.Type != pdu.FilesystemVersion_Snapshot {
return nil, fmt.Errorf("version %q is not a snapshot", fsv.Name)
}
ress[i] = &pdu.DestroySnapshotRes{
Snapshot: fsv,
// Error set after batch operation
}
reqs[i] = &zfs.DestroySnapOp{
Filesystem: lp.ToString(),
Name: fsv.Name,
ErrOut: &errs[i],
}
}
zfs.ZFSDestroyFilesystemVersions(ctx, reqs)
for i := range reqs {
if errs[i] != nil {
if de, ok := errs[i].(*zfs.DestroySnapshotsError); ok && len(de.Reason) == 1 {
ress[i].Error = de.Reason[0]
} else {
ress[i].Error = errs[i].Error()
}
}
}
return &pdu.DestroySnapshotsRes{
Results: ress,
}, nil
}