extern/zrepl
1
0
Fork 0
mirror of https://github.com/zrepl/zrepl.git synced 2024-11-22 00:13:52 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity

docs: improve overview

Browse Source 
There were and still is too many words. It's a very white paper vibe.
Docs needs to be more brief, exact, and on-point.

closes https://github.com/zrepl/zrepl/pull/618
This commit is contained in:
jtagcat 2022-07-13 14:15:03 +03:00 committed by Christian Schwarz
parent 299f1c906e
commit c7771f98f5
2 changed files with 23 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/configuration/misc.rst
View File

@ -1,3 +1,5 @@
.. _miscellaneous:
Miscellaneous
=============

44
docs/configuration/overview.rst
View File

@ -5,14 +5,15 @@ Overview & Terminology
All work zrepl does is performed by the zrepl daemon which is configured in a single YAML configuration file loaded on startup.
The following paths are searched, in this order:
1. If set, the location specified via the global ``--config`` flag
1. The path specified via the global ``--config`` flag
2. ``/etc/zrepl/zrepl.yml``
3. ``/usr/local/etc/zrepl/zrepl.yml``
The ``zrepl configcheck`` subcommand can be used to validate the configuration.
The command will output nothing and exit with zero status code if the configuration is valid.
``zrepl configcheck`` can be used to validate the configuration.
If the configuration is valid, it will output nothing and exit with code ``0``.
The error messages vary in quality and usefulness: please report confusing config errors to the tracking :issue:`155`.
Full example configs such as in the :ref:`quick-start guides <quickstart-toc>` or the :sampleconf:`/` directory might also be helpful.
Full example configs are available at :ref:`quick-start guides <quickstart-toc>` and :sampleconf:`/`.
However, copy-pasting examples is no substitute for reading documentation!
Config File Structure
@ -26,9 +27,8 @@ Config File Structure
type: push
- ...
zrepl is configured using a single YAML configuration file with two main sections: ``global`` and ``jobs``.
The ``global`` section is filled with sensible defaults and is covered later in this chapter.
The ``jobs`` section is a list of jobs which we are going to explain now.
A zrepl configuration file is divided in to two main sections: ``global`` and ``jobs``.
``global`` has sensible defaults. It is covered in :ref:`logging <logging>`, :ref:`monitoring <monitoring>` \& :ref:`miscellaneous <miscellaneous>`.
.. _job-overview:
@ -42,8 +42,7 @@ Jobs are identified by their ``name``, both in log files and the ``zrepl status`
.. NOTE::
The job name is persisted in several places on disk and thus :issue:`cannot be changed easily<327>`.
Replication always happens between a pair of jobs: one is the **active side**, and one the **passive side**.
Replication always happens between a pair of jobs: one **active side** and one **passive side**.
The active side connects to the passive side using a :ref:`transport <transport>` and starts executing the replication logic.
The passive side responds to requests from the active side after checking its permissions.
@ -72,30 +71,29 @@ How the Active Side Works
The active side (:ref:`push <job-push>` and :ref:`pull <job-pull>` job) executes the replication and pruning logic:
* Wakeup because of finished snapshotting (``push`` job) or pull interval ticker (``pull`` job).
* Connect to the corresponding passive side using a :ref:`transport <transport>` and instantiate an RPC client.
* Replicate data from the sending to the receiving side (see below).
* Prune on sender & receiver.
1. Wakeup after snapshotting (``push`` job) or pull interval ticker (``pull`` job).
2. Connect to the passive side and instantiate an RPC client.
3. Replicate data from the sender to the receiver.
4. Prune on sender & receiver.
.. TIP::
The progress of the active side can be watched live using the ``zrepl status`` subcommand.
The progress of the active side can be watched live using ``zrepl status``.
.. _overview-passive-side--client-identity:
How the Passive Side Works
--------------------------
The passive side (:ref:`sink <job-sink>` and :ref:`source <job-source>`) waits for connections from the corresponding active side,
using the transport listener type specified in the ``serve`` field of the job configuration.
When a client connects, the transport listener performS listener-specific access control (cert validation, IP ACLs, etc)
and determines the *client identity*.
The passive side job then uses this client identity as follows:
The passive side (:ref:`sink <job-sink>` and :ref:`source <job-source>`) waits for connections from the active side,
on the :ref:`transport <transport>` specified with ``serve`` in the job configuration.
The respective transport then perfoms authentication & authorization, resulting in a stable *client identity*.
The passive side job uses this *client identity* as follows:
* The ``sink`` job maps requests from different client identities to their respective sub-filesystem tree ``root_fs/${client_identity}``.
* The ``source`` might, in the future, embed the client identity in :ref:`zrepl's ZFS abstraction names <zrepl-zfs-abstractions>` in order to support multi-host replication.
* In ``sink`` jobs, to map requests from different *client identities* to their respective sub-filesystem tree ``root_fs/${client_identity}``.
* *In the future, ``source`` might embed the client identity in :ref:`zrepl's ZFS abstraction names <zrepl-zfs-abstractions>`, to support multi-host replication.*
.. TIP::
The implementation of the ``sink`` job requires that the connecting client identities be a valid ZFS filesystem name components.
The use of the client identity in the ``sink`` job implies that it must be usable as a ZFS ZFS filesystem name component.
.. _overview-how-replication-works:
@ -106,7 +104,7 @@ One of the major design goals of the replication module is to avoid any duplicat
As such, the code works on abstract senders and receiver **endpoints**, where typically one will be implemented by a local program object and the other is an RPC client instance.
Regardless of push- or pull-style setup, the logic executes on the active side, i.e. in the ``push`` or ``pull`` job.
The following high-level steps take place during replication and can be monitored using the ``zrepl status`` subcommand:
The following high-level steps take place during replication and can be monitored using ``zrepl status``:
* Plan the replication: