Before this change, resuming from an unencrypted dataset with
send.raw=true specified wouldn't work with zrepl due to overly
restrictive resume token checking.
An initial PR to fix this was made in https://github.com/zrepl/zrepl/pull/503
but it didn't address the core of the problem.
The core of the problem was that zrepl assumed that if a resume token
contained `rawok=true, compressok=true`, the resulting send would be
encrypted. But if the sender dataset was unencrypted, such a resume would
actually result in an unencrypted send.
Which could be totally legitimate but zrepl failed to recognize that.
BACKGROUND
==========
The following snippets of OpenZFS code are insightful regarding how the
various ${X}ok values in the resume token are handled:
- 6c3c5fcfbe/module/zfs/dmu_send.c (L1947-L2012)
- 6c3c5fcfbe/module/zfs/dmu_recv.c (L877-L891)
- https://github.com/openzfs/zfs/blob/6c3c5fc/lib/libzfs/libzfs_sendrecv.c#L1663-L1672
Basically, some zfs send flags make the DMU send code set some DMU send
stream featureflags, although it's not a pure mapping, i.e, which DMU
send stream flags are used depends somewhat on the dataset (e.g., is it
encrypted or not, or, does it use zstd or not).
Then, the receiver looks at some (but not all) feature flags and maps
them to ${X}ok dataset zap attributes.
These are funnelled back to the sender 1:1 through the resume_token.
And the sender turns them into lzc flags.
As an example, let's look at zfs send --raw.
if the sender requests a raw send on an unencrypted dataset, the send
stream (and hence the resume token) will not have the raw stream
featureflag set, and hence the resume token will not have the rawok
field set. Instead, it will have compressok, embedok, and depending
on whether large blocks are present in the dataset, largeblockok set.
WHAT'S ZREPL'S ROLE IN THIS?
============================
zrepl provides a virtual encrypted sendflag that is like `raw`,
but further ensures that we only send encrypted datasets.
For any other resume token stuff, it shoudn't do any checking,
because it's a futile effort to keep up with ZFS send/recv features
that are orthogonal to encryption.
CHANGES MADE IN THIS COMMIT
===========================
- Rip out a bunch of needless checking that zrepl would do during
planning. These checks were there to give better error messages,
but actually, the error messages created by the endpoint.Sender.Send
RPC upon send args validation failure are good enough.
- Add platformtests to validate all combinations of
(Unencrypted/Encrypted FS) x (send.encrypted = true | false) x (send.raw = true | false)
for cases both non-resuming and resuming send.
Additional manual testing done:
1. With zrepl 0.5, setup with unencrypted dataset, send.raw=true specified, no send.encrypted specified.
2. Observe that regular non-resuming send works, but resuming doesn't work.
3. Upgrade zrepl to this change.
4. Observe that both regular and resuming send works.
closes https://github.com/zrepl/zrepl/pull/613
This was merged to master prematurely as the job components are not decoupled well enough
for these signals to be useful yet.
This reverts commit 2c8c2cfa14.
closes#452
Primary goals:
- Scrollable output ( fixes#245 )
- Sending job signals from status view
- Filtering of output by filesystem
Implementation:
- original TUI framework: github.com/rivo/tview
- but: tview is quasi-unmaintained, didn't support some features
- => use fork https://gitlab.com/tslocum/cview
- however, don't buy into either too much to avoid lock-in
- instead: **port over the existing status UI drawing code
and adjust it to produce strings instead of directly
drawing into the termbox buffer**
Co-authored-by: Calistoc <calistoc@protonmail.com>
Co-authored-by: InsanePrawn <insane.prawny@gmail.com>
fixes#245fixes#220
This commit
- adds a configuration in which no step holds, replication cursors, etc. are created
- removes the send.step_holds.disable_incremental setting
- creates a new config option `replication` for active-side jobs
- adds the replication.protection.{initial,incremental} settings, each
of which can have values
- `guarantee_resumability`
- `guarantee_incremental`
- `guarantee_nothing`
(refer to docs/configuration/replication.rst for semantics)
The `replication` config from an active side is sent to both endpoint.Sender and endpoint.Receiver
for each replication step. Sender and Receiver then act accordingly.
For `guarantee_incremental`, we add the new `tentative-replication-cursor` abstraction.
The necessity for that abstraction is outlined in https://github.com/zrepl/zrepl/issues/340.
fixes https://github.com/zrepl/zrepl/issues/340
- **Resumable Send & Recv Support**
No knobs required, automatically used where supported.
- **Hold-Protected Send & Recv**
Automatic ZFS holds to ensure that we can always resume a replication step.
- **Encrypted Send & Recv Support** for OpenZFS native encryption.
Configurable at the job level, i.e., for all filesystems a job is responsible for.
- **Receive-side hold on last received dataset**
The counterpart to the replication cursor bookmark on the send-side.
Ensures that incremental replication will always be possible between a sender and receiver.
Design Doc
----------
`replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable.
The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc).
We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc.
This might BREAK CONFIG on upgrade.
Protocol Version Bump
---------------------
This commit makes backwards-incompatible changes to the replication/pdu protobufs.
Thus, bump the version number used in the protocol handshake.
Replication Cursor Format Change
--------------------------------
The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}`
Including the GUID enables transaction-safe moving-forward of the cursor.
Including the job id enables that multiple sending jobs can send the same filesystem without interfering.
The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors.
Changes in This Commit
----------------------
- package zfs
- infrastructure for holds
- infrastructure for resume token decoding
- implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code
- ZFSSendArgs to specify a ZFS send operation
- validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`)
- RecvOptions support for `recv -s` flag
- convert a bunch of ZFS operations to be idempotent
- achieved through more differentiated error message scraping / additional pre-/post-checks
- package replication/pdu
- add field for encryption to send request messages
- add fields for resume handling to send & recv request messages
- receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into
- can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream)
- used to set `last-received-hold`
- package replication/logic
- introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender
- integrate encryption and resume token support into `Step` struct
- package endpoint
- move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go`
- step-holds + step-bookmarks
- last-received-hold
- new replication cursor + old replication cursor compat code
- adjust `endpoint/endpoint.go` handlers for
- encryption
- resumability
- new replication cursor
- last-received-hold
- client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it
- client subcommand `zrepl migrate replication-cursor:v1-v2`
* stack-based execution model, documented in documentation
* circbuf for capturing hook output
* built-in hooks for postgres and mysql
* refactor docs, too much info on the jobs page, too difficult
to discover snapshotting & hooks
Co-authored-by: Ross Williams <ross@ross-williams.net>
Co-authored-by: Christian Schwarz <me@cschwarz.com>
fixes#74
