For this kind of debugging, we switched to env vars a while ago.
For example, ZREPL_RPC_DEBUG.
I don't think we have a substitute for the RPCLog stuff.
However, NetConnLogger is still in the codebase.
obsoletes https://github.com/zrepl/zrepl/pull/661
Originally, I had a patch that would replace all usages of
time.Duration in package config with the new config.Duration
types, but:
1. these are all timeouts/retry intervals that have default values.
Most users don't touch them, and if they do, they don't need
day or week units.
2. go-yaml's error reporting for yaml.Unmarshaler is inferior to
built-in types (line numbers are missing, so the error would not have
sufficient context)
fixes https://github.com/zrepl/zrepl/issues/486
It may be desirable to check that a config is valid without checking for
the existence of certificate files (e.g. when validating a config inside
a sandbox without access to the cert files).
This will be very useful for NixOS so that we can check the config file
at nix-build time (e.g. potentially without proper permissions to read cert
files for a TLS connection).
fixes https://github.com/zrepl/zrepl/issues/467
closes https://github.com/zrepl/zrepl/pull/587
Config:
```
- type: push
...
conflict_resolution:
initial_replication: most_recent | all | fali
```
The ``initial_replication`` option determines which snapshots zrepl
replicates if the filesystem has not been replicated before.
If ``most_recent`` (the default), the initial replication will only
transfer the most recent snapshot, while ignoring previous snapshots.
If all snapshots should be replicated, specify ``all``.
Use ``fail`` to make replication of the filesystem fail in case
there is no corresponding fileystem on the receiver.
Code-Level Changes, apart from the obvious:
- Rework IncrementalPath()'s return signature.
Now returns an error for initial replications as well.
- Rename & rework it's consumer, resolveConflict().
Co-authored-by: Graham Christensen <graham@grahamc.com>
Fixes https://github.com/zrepl/zrepl/issues/550
Fixes https://github.com/zrepl/zrepl/issues/187
Closes https://github.com/zrepl/zrepl/pull/592
fixes https://github.com/zrepl/zrepl/issues/504
Problem:
plain send + recv with root_fs encrypted + placeholders causes plain recvs
whereas user would expect encrypt-on-recv
Reason:
We create placeholder filesytems with -o encryption=off.
Thus, children received below those placeholders won't inherit
encryption of root_fs.
Fix:
We'll have three values for `recv.placeholders.encryption: unspecified (default) | off | inherit`.
When we create a placeholder, we will fail the operation if `recv.placeholders.encryption = unspecified`.
The exception is if the placeholder filesystem is to encode the client identity ($root_fs/$client_identity) in a pull job.
Those are created in `inherit` mode if the config field is `unspecified` so that users who don't need
placeholders are not bothered by these details.
Future Work:
Automatically warn existing users of encrypt-on-recv about the problem
if they are affected.
The problem that I hit during implementation of this is that the
`encryption` prop's `source` doesn't quite behave like other props:
`source` is `default` for `encryption=off` and `-` when `encryption=on`.
Hence, we can't use `source` to distinguish the following 2x2 cases:
(1) placeholder created with explicit -o encryption=off
(2) placeholder created without specifying -o encryption
with
(A) an encrypted parent at creation time
(B) an unencrypted parent at creation time
This was merged to master prematurely as the job components are not decoupled well enough
for these signals to be useful yet.
This reverts commit 2c8c2cfa14.
closes#452
This commit
- adds a configuration in which no step holds, replication cursors, etc. are created
- removes the send.step_holds.disable_incremental setting
- creates a new config option `replication` for active-side jobs
- adds the replication.protection.{initial,incremental} settings, each
of which can have values
- `guarantee_resumability`
- `guarantee_incremental`
- `guarantee_nothing`
(refer to docs/configuration/replication.rst for semantics)
The `replication` config from an active side is sent to both endpoint.Sender and endpoint.Receiver
for each replication step. Sender and Receiver then act accordingly.
For `guarantee_incremental`, we add the new `tentative-replication-cursor` abstraction.
The necessity for that abstraction is outlined in https://github.com/zrepl/zrepl/issues/340.
fixes https://github.com/zrepl/zrepl/issues/340
This is a stop-gap solution until we re-write the pruner to support
rules for removing step holds.
Note that disabling step holds for incremental sends does not affect
zrepl's guarantee that incremental replication is always possible:
Suppose you yank the external drive during an incremental @from -> @to step:
* restarting that step or future incrementals @from -> @to_later` will be possible
because the replication cursor bookmark points to @from until the step is complete
* resuming @from -> @to will work as long as the pruner on your internal pool doesn't come around to destroy @to.
* in that case, the replication algorithm should determine that the resumable state
on the receiving side isuseless because @to no longer exists on the sending side,
and consequently clear it, and restart an incremental step @from -> @to_later
refs #288
- **Resumable Send & Recv Support**
No knobs required, automatically used where supported.
- **Hold-Protected Send & Recv**
Automatic ZFS holds to ensure that we can always resume a replication step.
- **Encrypted Send & Recv Support** for OpenZFS native encryption.
Configurable at the job level, i.e., for all filesystems a job is responsible for.
- **Receive-side hold on last received dataset**
The counterpart to the replication cursor bookmark on the send-side.
Ensures that incremental replication will always be possible between a sender and receiver.
Design Doc
----------
`replication/design.md` doc describes how we use ZFS holds and bookmarks to ensure that a single replication step is always resumable.
The replication algorithm described in the design doc introduces the notion of job IDs (please read the details on this design doc).
We reuse the job names for job IDs and use `JobID` type to ensure that a job name can be embedded into hold tags, bookmark names, etc.
This might BREAK CONFIG on upgrade.
Protocol Version Bump
---------------------
This commit makes backwards-incompatible changes to the replication/pdu protobufs.
Thus, bump the version number used in the protocol handshake.
Replication Cursor Format Change
--------------------------------
The new replication cursor bookmark format is: `#zrepl_CURSOR_G_${this.GUID}_J_${jobid}`
Including the GUID enables transaction-safe moving-forward of the cursor.
Including the job id enables that multiple sending jobs can send the same filesystem without interfering.
The `zrepl migrate replication-cursor:v1-v2` subcommand can be used to safely destroy old-format cursors once zrepl has created new-format cursors.
Changes in This Commit
----------------------
- package zfs
- infrastructure for holds
- infrastructure for resume token decoding
- implement a variant of OpenZFS's `entity_namecheck` and use it for validation in new code
- ZFSSendArgs to specify a ZFS send operation
- validation code protects against malicious resume tokens by checking that the token encodes the same send parameters that the send-side would use if no resume token were available (i.e. same filesystem, `fromguid`, `toguid`)
- RecvOptions support for `recv -s` flag
- convert a bunch of ZFS operations to be idempotent
- achieved through more differentiated error message scraping / additional pre-/post-checks
- package replication/pdu
- add field for encryption to send request messages
- add fields for resume handling to send & recv request messages
- receive requests now contain `FilesystemVersion To` in addition to the filesystem into which the stream should be `recv`d into
- can use `zfs recv $root_fs/$client_id/path/to/dataset@${To.Name}`, which enables additional validation after recv (i.e. whether `To.Guid` matched what we received in the stream)
- used to set `last-received-hold`
- package replication/logic
- introduce `PlannerPolicy` struct, currently only used to configure whether encrypted sends should be requested from the sender
- integrate encryption and resume token support into `Step` struct
- package endpoint
- move the concepts that endpoint builds on top of ZFS to a single file `endpoint/endpoint_zfs.go`
- step-holds + step-bookmarks
- last-received-hold
- new replication cursor + old replication cursor compat code
- adjust `endpoint/endpoint.go` handlers for
- encryption
- resumability
- new replication cursor
- last-received-hold
- client subcommand `zrepl holds list`: list all holds and hold-like bookmarks that zrepl thinks belong to it
- client subcommand `zrepl migrate replication-cursor:v1-v2`
* stack-based execution model, documented in documentation
* circbuf for capturing hook output
* built-in hooks for postgres and mysql
* refactor docs, too much info on the jobs page, too difficult
to discover snapshotting & hooks
Co-authored-by: Ross Williams <ross@ross-williams.net>
Co-authored-by: Christian Schwarz <me@cschwarz.com>
fixes#74
